Scale to fit not working in Ppro cs3

I have an issue with scale to fit of export settings in Premier Pro CS3. I need to eliminate the black bars on the side of clips. I check the scale to fit of the output box but it will not do the job. I have to manually play around with pixels numbers in order to get rid of the black bars. Is this normal or am I missing something?

I have a semi-related question. I'm using CS4. Does scale to fit reduce the image quality? It seems like it does.
I shot P2 HDV footage in the widescreen ratio (shot 24p 720p HVX-200), but my intention was to present a 1.33 image aspect ratio (not to be confused with the HDV pixel aspect ratio) even on the 16x9 displays, in other words pillarboxed.
This output was successful using crop tool in Media Encoder, but on 4x3 TVs, I want to present a fullscreen image. I output with Media Encoder, select 4x3, and I crop the same way, and then I choose "scale to fit". However, this reduces the image quality.
Is there any other way I can take 16x9 1.78 footage and crop it in Premiere Pro, or Encore, or Media Encoder to create a full-quality 4x3 image that is fullscreen on 4x3 TVs? (Note: I definitely don't want a letterboxed and pillarboxed result on 4x3 TVs, i.e. windowboxed).
I tried opening new Premiere Pro projects with different settings, and tried using "interpret footage" to fool it, but I couldn't hit on the magical combination to create a 4x3 cropped project (or Pan&Scan you might say) in Premiere Pro. Are there some Pan and Scan tools in Premiere Pro that can do this?
I found some help here. It says: "This techniques is called pan & scan. In Adobe Premiere Pro, you can implement either technique by using Motion effect properties such as Position and Scale." But what the heck would I do? Open a 4x3 standard def project and then import the HDV P2 footage and use position and scale there? Cropping it in an appropriately opened DVCPROHD project has a 16x9 image area to start with...
Any help?

Similar Messages

Scale to Fit not working

I use very high resolution monitors in my office and most of the client PCs show up tiny in the logmin app window. Resizing the window results in a large window with a huge black border... why can't the default be to scale to the window size like Teamviewer or just any other remote access program? ok, so resizing doesn't work, but me thinks "ah ha! the Scale to Fit button will do the job" - WRONG! It does nothing. Instead I have to use Zoom until it sort of fills the window. What am I missing? How do I get Scale to Fit to work? Thanks

Welcome to the forum.
Unfortunately, you've posted to the wrong sub-forum. You want the PrPro Forum for CS3.
Now, the MOD's will probably move this one to that location for you, but in the meantime, can you tell us in full detail what your Project Preset is and also the full details of your source footage? Next, give a description of your Export settings.
That will likely point up where the error is.
Good luck,
Hunt

Illustrator scale tool is not working

Scale tool in my illustrator is not worrking. How can I solve this problem?

Hi
I made 3rd step and most of the functions lost from the menus
iPhone'umdan gönderildi
15 Mar 2014 tarihinde 12:27 saatinde, "Jacob Bugge" <[email protected]> şunları yazdı:
Re: Illustrator scale tool is not working
created by Jacob Bugge in Illustrator - View the full discussion
nurcan,
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences):
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press CtrlAltShift/CmdOptionShift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6211732#6211732
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6211732#6211732
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6211732#6211732. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Illustrator at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

CMD+ shortcuts not working in Dreamweaver CS3

I'm have a very strange issue with CMD+ keyboard shortcuts
not working in Dreamweaver CS3 on OSX 10.5. These actions are
working from the menus (i.e., copy, cut, paste, etc.). CMD+
shortcuts work in other CS3 apps. I've searched this forum and
googled up and down and found some references to issues like this
with Dreamweaver 8, but nothing for CS3.
Has anyone experienced this problem? I'm completely stumped.
Lawrence

My concern wasn't with the navbar, but thanks for the headsup.
The problem is that the link in the upper left hand corner, Suzie's Story, is a rollover image but it does not reveal the other image when the cursor goes over it.
                        <div id="topTabs1">
   <div align="center"><a href="http://www.google.com" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('suzie','','Images/Suzie's Story Tab_light.jpg',1)"><img src="Images/Suzie's Story Tab_black.jpg" alt="suzie" name="suzie" width="75" height="45" border="0" id="suzie" /></a></div>
         </div>
#topTabs1 {
width: 75px;
height: 45px;
float: left;
background-color: #ffffff;
padding-left: 0px;
padding-right: 0px

Why Vanishing Point is not working in PS CS3 as it was showing in the tutorial Disk?

Vanishing Point is not working in PS CS3. I was trying 10s of time or may be I am not working right. But whatever it says and showing in the Tutorial Vedio, not happening that easy. Or it does not cover in the Photoshop CS3. Because that's the way its look like now. does anybody know how can we make it work possible?
Thank You.
jeevan.

Here is a copy of my expressions and a copy of my data. The expressions match up going from left to right
Code.CalcPTD2(Lookupset(FORMAT(Fields!REALDATE.Value,"Long Date"),FORMAT(Fields!CallbackDate.Value,"Long Date"),Fields!DailyHours.Value,"DataSet4"))
sum(Code.CalcPTD2(Lookupset(FORMAT(Fields!REALDATE.Value,"Long Date"),FORMAT(Fields!CallbackDate.Value,"Long Date"),Fields!DailyHours.Value,"DataSet4")))
count(Code.CalcPTD2(Lookupset(FORMAT(Fields!REALDATE.Value,"Long Date"),FORMAT(Fields!CallbackDate.Value,"Long Date"),Fields!DailyHours.Value,"DataSet4")))
PUBLIC SHARED FUNCTION CalcPTD2(LookupArray AS OBJECT) AS INTEGER
     DIM i,Total AS INTEGER
     Total = 0
     FOR i = 0 to UBOUND(LookupArray)
           Total = Total + CINT(LookupArray(i))
     NEXT i
NumberTimes =   NumberTimes +1
RETURN Total
END FUNCTION

Zoom-to-fit Not Working in Preview, & other features, too.

I recently upgraded to Snow Leopard, and have since found that Preview is not working properly. This is something I use almost every day, & it not working has created a real disruption to my work-flow. I've noticed that others have complained about this, and have been doing so since at least October of 2009! Apple has obviously not addressed this, as I've done all the updates, and still it doesn't work. The Zoom-to-fit won't work, altho it sometimes will when there's only a little bit of space left, & sometimes when the image is too big, it may reduce. However, the "automatically resize" doesn't work either, and some other features work erratically as well. Sometimes when I change the resolution of the picture, it will zoom to fit, & sometimes well, so many things don't work, or do, but so rarely, I can't even remember all the instances.
Does anyone actually have some kind of work around, or solution? I've done the trash all the preferences, etc., which didn't do anything, and am stumped at this point, thanks...

Tom Gewecke wrote:
does Apple really know about this, and are just ignoring it or are they working on a fix, or ?
Surely you understand that you are not talking to Apple here, just other users like yourself. Whether Apple knows about it depends on whether you or someone else has used the bugreporter or feedback channel to tell them. As for what action they are taking, nobody here is ever going to be able to give you an answer.
Yes, I do understand that, and my question was in response to being told that
"Preview in SL is broken", by one of the "experts" when I posted my own thread about it not working properly. To me, that response implied this was a known condition, & that this person knew that Apple knows, & since this was all he said, w/no other advice, it further implied that a fix would come out whenever it will, and there's no use in pursuing it further. So, my question was to anyone else to affirm or deny that is or isn't the case.
Plus, I've read that in fact, some employees of Apple do contribute to the discussions (as they surely should, if for no other reason, that what I just spoke of, to let us know when an issue is a known one, thus nothing else can be done until Apple releases a fix; thus preventing users from wasting time &/or screwing something up worse, attempting to fix it)
Does Adobe Reader provide a possible replacement for Preview for your purposes?
Don't know, I'd rather not have to open it for all the times I would simply use Preview, why have it as part of the OS if it doesn't work? I'd think Apple would fix it, or not show features it can't do. That said, your question is actually the first response I've seen yet, that at least is a possible work around, thank you.
(another thread on the same issue was marked "answered" & closed, despite no one having offered up a fix),
How a thread is marked is totally up to the person who started it. If you have a problem with how it was done, you need to take it up with that person I think.
I will, but it's not the person who closed the thread, as that was done nearly two months after it was marked "Solved". And yes, it could have been archived due to no further comments, although we've no way of knowing, since there's no date of archiving shown. And that is what I'm wondering, did Apple just close it, to avoid the topic being taken to the top of the list? If this feature is broken, why haven't they fixed it, now nearly a year later???
And I have personally reported this in several feedback forms. I refuse to sign up for the developers group, just to file a bug report, since I would have to answer all the questions in the application form without knowing what the heck I was talking about, since I am hardly a developer/programmer, techno-geek, etc., and shouldn't have to jump through all those hoops, just to report to Apple that something's screwed up! I can send bug reports via Safari w/o signing up as an advanced computer engineer, why should I have to for reporting the same with Preview? If Apple chooses to ignore feedback reports, as well as their discussion boards, then what real customer service would that be?

Shrink-To-Fit Not Working

HP Officejet 5610 All-In-One printer running windows XP. When I try to print a web page and click on the "Shrink-To-Fit" option it does not work. I checked for updated drivers and none are available. Anyone been able to solve this problem>

I also have this problem where I used to be able to shrink a 2 page doc to a single page. Since upgrade to FF4 it no longer works - but you can choose say 60% and it will work. All used to work fine in FF3

Navigation bar does not work properly in CS3

The navigation bar shows only the up and the over pictures in
all browsers. It works properly in a framed site, showing all 4
different pictures. But not in the css-layout based site with files
from the same template, which show all in the same window. Does
anyone know where this problem comes from?

> Why not use frames again?
This question is answered in detail several times a day here,
but here's the
executive summary -
1. They are difficult for inexperienced users to get right -
a) pages will not align properly if one of them throws
scrollbars
b) links will not work when targeted into different frames
without
hand-modification of code
c) new (and inexperienced users) have problems with the idea
of a single
frameset page that only specifies constituent frames
d) new (and inexperienced users) can be confused by the fact
that the
<title> tag on the frameset page is the one that
appears in the browser
e) etc., etc., etc.
2. They are difficult for your visitors
a) depending on how savvy you are, you may have removed
scrollbars to
'fix' #1b, not thinking that you have also removed those
scrollbars for
people with smaller viewports
b) search engines will index *all* pages within your
frameset, meaning
that a navigation frame or a content only page MAY be shown
in a search hit
list - imagine the confusion when the page is loaded without
navigation, for
example
And - they are so amateur. Really.
> it doesn't
> matter if I use javascript or CSS rollovers, only up and
over will work
> with
> refreshed pages.
With js rollovers it's only *easy* to achieve the up and the
over states.
With CSS rollovers, you can achieve up, over, over while
down, and down.
> Lots of the CS3 manual obviously refers to those
> "oldfashened" stuff.
Much of this has been removed in CS4.
> The paid diva comes in to do the job down and over by
down in
> both cases.
The DivaHTML extension is a good deal. It is just a CSS
rollover with an
'easy' user interface.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"quilterin" <[email protected]> wrote in
message
news:[email protected]...
> Thanks again! I will look at the code. So if I
understand right, it
> doesn't
> matter if I use javascript or CSS rollovers, only up and
over will work
> with
> refreshed pages. The paid diva comes in to do the job
down and over by
> down in
> both cases.
> Why not use frames again? Is it just out of fashion? Or
are there
> substantial
> reasons against it? Lots of the CS3 manual obviously
refers to those
> "oldfashened" stuff.
>

Gaussian Blur does not work on Photoshop CS3

Hello,
the last few days the gaussian blur plugin does not work in Adobe Photoshop CS3. Can you tell me what can i do to solve this problem??

Boilerplate-text:
Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by pressing command-alt-shift/ctrl-alt-shift while starting Photoshop until the appropriate dialog appears after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)

Resize window to fit not working

I can't get the resize window to fit option working. It has worked in the past; I have no idea what changed.
I am using Adobe CS4 (11.0.2) on Windows 7 (6.1) 32 bit operating system.
I made sure the resize window to fit option is turned on and deleted the preferences file. How can I fix this?

dmr1234 wrote:
I can't get the resize window to fit option working.
I made sure the resize window to fit option is turned
Where is that option. I know of menu View>Fit On Screen shortcut Ctrl|Cmd+0 and that you can set a script event manager open event to run a Script or action to do a View>Fit on Screen but the only Preferences option I know of for image window size is "Zoom resizes window"???

Scale Fit Not Working Correctly

Hello,
I have a front panel with a tab control containing 12 tabs. Each tab contains a cluster with one of the controls as an XY Graph. When I populate each of the graphs with data, I want to set the "Scale Fit" or "ScaleFit" property to 1 so that each graph is autoscaled 1 time. The problem I am running into is that only the graph that is shown is scaled correctly. The other 11 plots do not get scaled at all even if I set the "Autoscale" property to "On". This looks like a bug of some sort. Has anyone found a workaround? I tried turning on/off "Loose Fit" and this does not help.
I am running LV 8.5 on a WinXP machine.
Michael

Hi Mike,
Updating only 1 tab out of 12 doesn;t work, however, I guess I can do a single scale fit to other tabs if there has not been a scale fit done on the page before. Kind of a lot of work but I can swing it. Seems like NI should get this fixed.
Mike 2

Image Field Scale Proportionally does not work

Dear all,
we are using LiveCycle Designer ES 8.2 to program a dynamic form in which we want to use image fields. Users filling the form should choose the picture to display in the image field.
We set the Image Field to embed data (so it can be saved) and to scale proportionally.
Testing the form with Adobe Reader 8.1.4 or 9.1, it’s possible to insert a picture, but it does not get scaled and seems to be positioned in the Background of the form.
Who can help us fixing this problem? If helpful, i can provide a copy of the form draft. Thanks in advance for any help und
kindest regards
Tobias

Yehaaa,
figured it out by myself. Sometimes it's good to sleep a night over it ...
The solution is: In the Layout Tab of the image field, no exact measures were defined (extend to fit boxes checked). This way the poor program goes into a circuit.
Cheerio
Tobias

Why is my mic suddenly not working in PPro CS4?

Hi
I have a mac running CS4 Premiere Pro.
I'm using a SM57 mic which I plug into a pre-amp to boost the sound and then from this box I plug into the line-in slot on my mac. I'm recording simple voice-overs over silent footage.
It's all been working beautifully. But now it's not receiving any sound (the green bars don't move) and I can't work out why.
It's not the pre-amp, cables or mic - they all work fine through garageband (but the sound quality isn't nearly as good so I don't want to use that and then export to PPro)
I'm certain I have set it up as I always have done. I'm completely baffled as to what has gone wrong.
Any suggestions much appreciated...

When something works one day, but not the next, then something has changed. The task is to find out what has changed. My first guess would be that an Audio Hardware setting in PrPro has changed, Edit>Preferences>Audio Hardware. The second would be that something has changed in the OS, but as the mic still functions in other programs, but not in PrPro, I moved this down to #2, for possible causes.
Check the Audio Hardware settings in PrPro, and maybe upload screen-caps of the dialog screens, so that others can see the settings, if nothing jumps out at you.
If nothing is wrong in Audio Hardware, I would Delete, Move or Rename the Preferences file for PrPro. I will not even try to talk you though that on a Mac, as I will certainly mess things up, being a PC-guy. PrPro will regenerate a new Preferences file, though you will have to then manually adjust those, as you require, since it will be the install default Preferences. Maybe a Mac-user can give you directions on how to do this. On a PC, one would just hold down the Ctrl+Alt+Shift keys, while doing the full launch of the program, all the way through that launch. Or, they could go into the folder structure, and locate the Preferences file, and either Deleting it, Moving it, or Renaming it.
Good luck,
Hunt

Login php page not working in dw cs3

Hi!
I am new to php. I created a login (php5.2.5) page using
dreamweaver cs3 with mysql database. I have added
the login user server behaviour. When I preview, the login
page opens, i enter the username and password, but
the username and password is not validated and page not
redirected, remains as it is. I get the following error
in the localhost.error.log:
PHP Warning: Cannot modify header information - headers
already sent by (output started at C:\\Program
Files\\Apache Software
Foundation\\Apache2.2\\htdocs\\PHPCLI\\main.php:1) in C:\\Program
Files\\Apache Software
Foundation\\Apache2.2\\htdocs\\PHPCLI\\main.php on line 68,
referer:
http://localhost/main.php
The page worked fine before adding login server behaviour.
Here is the code from main.php(created thru dw cs3). mysql
database created thru phpmyadmin.
<?php virtual('/Connections/js.php'); ?>
<?php
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType,
$theDefinedValue = "", $theNotDefinedValue = "")
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue)
: $theValue;
$theValue = function_exists("mysql_real_escape_string") ?
mysql_real_escape_string($theValue) :
mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "'" . $theValue . "'" :
"NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? "'" . doubleval($theValue) .
"'" : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "'" . $theValue . "'" :
"NULL";
break;
case "defined":
$theValue = ($theValue != "") ? $theDefinedValue :
$theNotDefinedValue;
break;
return $theValue;
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType,
$theDefinedValue = "", $theNotDefinedValue = "")
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue)
: $theValue;
$theValue = function_exists("mysql_real_escape_string") ?
mysql_real_escape_string($theValue) :
mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "'" . $theValue . "'" :
"NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? "'" . doubleval($theValue) .
"'" : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "'" . $theValue . "'" :
"NULL";
break;
case "defined":
$theValue = ($theValue != "") ? $theDefinedValue :
$theNotDefinedValue;
break;
return $theValue;
mysql_select_db($database_js, $js);
$query_jsrecord = "SELECT * FROM matrimony";
$jsrecord = mysql_query($query_jsrecord, $js) or
die(mysql_error());
$row_jsrecord = mysql_fetch_assoc($jsrecord);
$totalRows_jsrecord = mysql_num_rows($jsrecord);
?>
<?php
// *** Validate request to login to this site.
if (!isset($_SESSION)) {
session_start();
$loginFormAction = $_SERVER['PHP_SELF'];
if (isset($_GET['accesscheck'])) {
$_SESSION['PrevUrl'] = $_GET['accesscheck'];
if (isset($_POST['profileid'])) {
$loginUsername=$_POST['profileid'];
$password=$_POST['password'];
$MM_fldUserAuthorization = "";
$MM_redirectLoginSuccess = "/jsdirectory.php";
$MM_redirectLoginFailed = "/errorlogin.php";
$MM_redirecttoReferrer = false;
mysql_select_db($database_js, $js);
$LoginRS__query=sprintf("SELECT profileid, password FROM
matrimony WHERE profileid=%s AND
password=%s",
GetSQLValueString($loginUsername, "text"),
GetSQLValueString($password, "text"));
$LoginRS = mysql_query($LoginRS__query, $js) or
die(mysql_error());
$loginFoundUser = mysql_num_rows($LoginRS);
if ($loginFoundUser) {
$loginStrGroup = "";
//declare two session variables and assign them
$_SESSION['MM_Username'] = $loginUsername;
$_SESSION['MM_UserGroup'] = $loginStrGroup;
if (isset($_SESSION['PrevUrl']) && false) {
$MM_redirectLoginSuccess = $_SESSION['PrevUrl'];
header("Location: " . $MM_redirectLoginSuccess );
else {
header("Location: ". $MM_redirectLoginFailed );
?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=utf-8" />
<title>Untitled Document</title>
<style type="text/css">

</style></head>
<body>
<div id="main">
<div align="center">
<p> </p>
<form action="<?php echo $loginFormAction; ?>"
method="POST" name="jsloginform" id="jsloginform">
<table width="100" border="1">
<tr>
<td><label for="profileid">profile
id</label>
<input type="text" name="profileid" id="profileid"
/></td>
</tr>
<tr>
<td><label for="password">password</label>
<input type="password" name="password" id="password"
/></td>
</tr>
<tr>
<td><label for="submit"></label>
<input type="submit" name="submit" id="submit"
value="Submit" /></td>
</tr>
</table>
</form>
<p> </p>
</div>
</div>
</body>
</html>
<?php
mysql_free_result($jsrecord);
?>
Kindly help...

radhababu wrote:
> PHP Warning: Cannot modify header information - headers
already sent by
> (output started at C:\\Program
>
> Files\\Apache Software
Foundation\\Apache2.2\\htdocs\\PHPCLI\\main.php:1) in
> C:\\Program
>
> Files\\Apache Software
Foundation\\Apache2.2\\htdocs\\PHPCLI\\main.php on line
> 68, referer:
"Headers already sent" is a common problem encountered by PHP
beginners.
The DW Log In User server behavior uses the PHP header()
function to
redirect the page after checking the username and password.
There must
be no output to the browser before the call to header(). What
confuses
beginners is that "output" includes even a single space or
new line
character.
The error message suggests the problem is on line 68. Are you
using echo
or anything like that? If so, that's the cause of your
problem.
Another common cause is an extra line at the end of the
connections
file. Open Connections/js.php, and make sure there are no
extra lines
after the closing PHP tag. You can do this by looking at the
line
numbers. Click as far down on the page as you can, and use
backspace
until your cursor is directly to the right of the closing PHP
tag.
One other possible cause is the use of links relative to the
site root.
When you set that preference in your site definition,
Dreamweaver uses
virtual() to include the connections file like this:
> <?php virtual('/Connections/js.php'); ?>
Try changing that to this:
<?php require_once('Connections/js.php'); ?>
Make sure the relative path to the file is correct.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

Printing NOT working from PS CS3 - Z3100 but DOES work with Lightroom 2

I have been printing on a Mac with PS CS3 using a Z3100. All has been fine. Today I'm trying to print a 46x54" image from PS. I have not been able to make this work. PS sits for a while, thinks for a while, chews up resources, hangs on occassion as reported by the Activity Monitor, and then .... nothing. PS sits there and the print goes away. The job never appeared in the print monitor. I did all the usual. Rebooted the world, reinstalled the HP Z3100 drivers, and the same thing. I then gave it a shot, after many hours, and thought I'd try Lightroom 2.0. Holy mother of Michael Phelps, the print job was submitted in no time and the job is humming along with no issues. The only issue is that Lightroom is not showing Absolute Colorimetric as an option which I use and chose Perceptual instead.
The file size was 1.2 GB and 16-bit. I lowered to 8 bit for PS and still to no avail. I printed in 8-bit on LR 2.0.
Is this an issue with Photoshop? I'm running a Mac Pro Quad with on OS X 10.4.11 and 6 GB of RAM.

Something has gone wrong with how Lightroom finds and communicates with Photoshop.
That could be a registry string, or some preference within Lightroom.
The Lightroom forum is more likely to be able to help you solve this.

Scale to fit not working in Ppro cs3

Similar Messages

Maybe you are looking for