"Scale to sequence" missing in Modify, yet users manual says it is there

I want to enlarge a photo imported into FCE from Iphoto and can't figure out how to do it. The Users Manual that comes with FCE on page 763 says to go to Modify then Scale to Sequence, but there is no such command in Modify.
I see that Tom Wolsky says there is no such command available in FCE, then why is it in the Manual?
Very frustrating.
Anyway, is there a way to enlarge an imported photo either in Timeline, Viewer, or Browser?
All help is appreciated.

When the images are in the sequence select them and use remove attributes Cmd-Opt-V. Check basic motion to reset the scale. You can also open individual items into the Viewer and reset he scale in the Motion tab.

Similar Messages

  • E71 User Manual Handbook Deficiencies

    It's probably just me in one of my 'Victor Meldrew' moments but I get really annoyed with user manuals like this.  There's a diagram on page 10 that's supposed to show 'Keys and parts' which you would assume would show ALL the keys.  I was curious to find out the purpose of the keys on the side of the phone; there’s no mention of anything on the side of the phone.  I figured that the < and > arrows must be the volume keys but couldn’t figure out the one in between them. Hmmm. I know, I’ll look up ‘Volume Control’ in the index.  The relevant page says, “To adjust the earpiece volume …………… use the volume keys.” Brilliant! What if you didn’t know where they were in the first place?  Still no mention of the other button.  Google. Ah, it’s to do with the Voice Commands, let’s look that up in the Index. Nothing!!! I found it on page 34. What’s the point of having an index that doesn’t cover all the content?  It gets better. “1. To make a call using a voice command, press and hold the voice key.” Priceless.  They we go; rant over. I don’t know what else is missing or other deficiencies contained within this handbook but it just saddens me that here we are (22nd April 2009) and companies are still producing sub‑standard documentation like this.  Am I alone in thinking like this? Oh. OK, just me then!

     Hi, I take it you didn't read page 5 of the E71 Quick Start Guide
    Sides
    1
    Headset
    connector
    2
    Volume
    up key
    3
    Voice
    key. Press this key to mute and unmute the
    active
    call. This key is also used in the Voice
    commands
    and
    PTT
    applications.
    4
    Volume
    down key
    5
    Infrared
    port
    6
    Memory
    card slot
    7
    Micro-USB
    connector
    ehmecksfunf

  • FCE4 'Modify Scale to Sequence' - not here .. :(

    pg 801 of the FCE handbook describes a method to scale stills (and videos) 'automatically' to Sequence properties.. it says:
    .. To scale an image within a sequence to exactly fit the sequence dimensions:
    1 Select one or more clips in the sequence. ∏ Tip: You can also place the playhead over a clip in the Timeline without selecting any clips.
    2 Choose Modify > Scale to Sequence.
    Each selected clip’s Scale parameter is set to the appropriate amount so that both horizontal and vertical image dimensions fit within the sequence dimensions. The images are not squeezed or stretched, but they may appear letterboxed or pillarboxed if the aspect ratios of the image and the sequence don’t match.
    Note: The Scale to Sequence command works on video clips as well as still-image clips.
    unfortunately, there's no 'Scale to Sequence'-command in that menu of FC/e 4.0.1 ..
    Uploaded with plasq's Skitch!
    so.. ? wrong chapter in handbook, FC/p only? ..
    appreciate any insights ..

    thanks, Tom, mystery solved!
    they translated this error into the German manual too

  • Hi All, We are in to Release 11.5.10.2.There is a specific requirement to Prevent users from creating Manual Sales Orders in oracle and yet users should be able to book the Sales Orders Imported from CRM system into Orcale.Please advise.

    Hi All, We are in to Release 11.5.10.2.There is a specific requirement to Prevent users from creating Manual Sales Orders in Oracle and  yet users should be able to book the Sales Orders Imported from CRM system into Orcale.Please advise.

    Thanks for your advise.
    However, I missed to mention that we have two set of users  One is for Finished Goods and another for Spares.
    Only Spares users need to be prevented from creating Direct/Manual Sales Orders in Oracle.
    As you suggested, if this will be done at Form level, that may Disallow FG users also to create Manula Sales Orders which should not be the case.
    Further, I tried to test one scenario through Processing Constraints but it did not work.
    Application
    OM
    Validation Type
    Entity
    Temp
    Short Name
    TBL
    Validation Semantics
    Created By
    Equal To
    User(Myself)
    Processing Cosntraint
    Application
    OM
    Entity
    Order Header
    Constraint
    Operation
    User Action
    Create
    Not Allowed
    Conditions
    Group
    Scope
    Validation Entity
    Record Set
    Validation Template
    101
    Any
    Order Header
    Order
    Above Created
    Please advise.

  • Rules within sequence are not completing after user logged out.

    We have been noticing since yesterday that rules within a sequence not being completed when user logs off planning.
    A. User kicks off a sequence from planning. This sequence has 4 rules.
    B. Logged off either after launching or after waiting few minutes and logged off.
    C. Next rules do not start and we noticed session is ending from AAS.
    However user closes browser sequence completes. Yes sequence has no errors. It was working fine until last week and only change was 'NETDELAY' value. Changed from 1500 to 60000.
    Not tried from SmartView yet.
    Edited by: venuramini on Jun 22, 2009 5:40 PM
    Corrected typo in title.

    Reason for changing from 1500 to 60000 was, do not remember exactly, issue with MS Excel connectivity. We implemented long ago in dev but never updated other environments.
    As far as other HBR_MAX_WAIT_FOR_RULE and HBR_MONITOR_DELAY we have tried and did not achieve desired results.
    FYI: we are using Planning 9.3.0.1 and wanted rules running longer than 60 minutes to go in background mode. But above setting would not be useful for 9.3.0.1.
    Am I confusing you?
    More info of original issue: Business rules time-out. Planning 9.3.0.1
    Since then, we have increase web session time-out to 720 min (12 hours), in-activity session timeout to 720 min to let sequence complete even if user session timed out.
    Thanks!
    Venu

  • Scale to Sequence?

    Hi Everyone!
    I apologize for the newb query, but Search yielded nothing. And until I deal with this problem, I'll never get to the interesting stuff!
    I grabbed some anamorphic video from dvds of my stuff, 'cause I wanna make them available on the web. My Sequence settings are NTSC DV 3:2, (16:9 anamorphic box checked), and the window size looks just right. I then import my mov video, place it in the timeline, and it's pillarboxed in the centre. I select it, choose Scale to Sequence, and... nothing happens. The manual assures me it oughta just stretch right out, but nothing doing. Ditto Conform to Sequence.
    Has anyone else had this problem? Is it even a problem, or am I just missing something?
    I would love any help you could offer!

    Michael Grenadier wrote:
    I'm still working in fcp5.14 but this might still work. Select one of the clips in the browser, hit command-9 and make sure the anamorphic box is checked. Quicktime and/or fcp seems to have a problem saving and/or recognizing the anamorphic flag. Once you've done this reedit the clip into the timeline. Any better?
    You, sir, are THE MAN!
    Problem solved, many thanks to you.
    Now I can get to work!

  • Error message: The preset used by one or more sequences in this project requires third-party components that could not be located. These sequences will be modified to use a custom sequence setting instead. To continue editing using the original preset, qu

    Hello all,
    I can't open a PP project without this error message appearing:
    "The preset used by one or more sequences in this project requires third-party components that could not be located. These sequences will be modified to use a custom sequence setting instead. To continue editing using the original preset, quit the application without saving the project, reinstall any third-party components that are required and reopen the project".
    What I had been doing before this occurred was editing a PP project using ProRes sequences and multi-camera editing. Multi-camera was not working very well and after a few attempts to fix that I gave up and finished the job cutting 3 layers of video instead. AME refused to render the three finished sequences of over 1hr duration so rendered final videos from the PP sequences.
    I tried deleting plists for AME, PP and QT, repairing disc permissions and rebooting but there was no improvement.
    Client is satisfied for now but will want to come back to this job at a later date so decided to uninstall and re-install AME and PP in the hope both would be ready to work properly when needed again. AME works fine in conjunction with a different PP project but now I can't open the PP project in question without the above error message appearing.
    Having searched the net it would seem that the problem may be caused by ProRes but I haven't been able to find a definitive solution for the problem. Does anyone know either:
    1. How to fix this?
    2. If I chose the "modified using a custom sequence setting", can I be sure that my sequences will look the same even if they don't use ProRes? The final deliverable format will be mp4 so as long as the overall look doesn't change then I can  afford a change in the edit codec. It's just that with three sequences over an hour long, I don't want days of work to be ruined.
    Other older PP projects of mine open and work fine.
    Premiere Pro CC 8.2.0
    Media Encoder CC 8.2.0.54
    OSX 10.10.2
    Any help would be greatly appreciated.
    Duncan.

    Adobe web chat come up with a solution.
    Open the PP project.
    Export your sequence or project as a Final Cut Pro XML file.
    Set up a new PP project.
    Import the Final Cut Pro XML file.
    This will get you back up an running.
    Since getting back to editing this project I have found that some things will be lost or change in using XML:
    You will lose position key framing, black video clips, dissolve fx, audio levels, audio dynamic fx, the ability to open a multi camera clip and change the camera view.
    You will keep cut points, crop fx.
    Not perfect but only took a couple of hours to save 3 days work.

  • SAP-MM CIN Error: JTAX Access sequence missing at the time of excise invoice creation in J1IS

    Dear Sir,
    During creation of excise invoice with ref to material doc system give a error massage JTAX access sequence is missing. Access sequence and tables are already exist in system.
    1.PO
    2. GR with excise capture& post here Part-I&II are genarated.
    3.Invoice
    4.Return delivery with reference to above goods receipt document.(122 m.type)
    5. J1IS- Creating outgoing excise invoice w.r.to return delivery material document.
    JTAX Access sequence missing at the time of excise invoice creation in J1IS

    The same error coming while consignment stock issue to cost center.
    1.Consignment Info record with excise tax code.
    2.PO consignment purchase order.
    3.GR with excise capture & post here Part-I&II documents are created.
       Material document created but there is no accounting document.
    4.While doing Consignment stock issue to cost center system generate an error message
    Access sequence JTAX missing  ( ) Message no. VE306"

  • Missing User Manual for Acrobat 9.0

    Along with my recent Design Premium upgrade, I ordered the Adobe CS4 Design Premium User Guide.  And much to my surprise, it's complete documentation in separate books! Great!! I didn't know anyone still knew how to do that. So I get a pile of books about six inches high - and there's no manual for Acrobat. Completely missing from the CS4 group.  What gives?
    Logged a customer service query, after a couple of conversations with some CSRs, found out that Adobe doesn't supply a printed user manual along with all the other applications.  Here's the excuse I was given: "The decision was made to not print the manual because we wanted to conserve on paper.  Adobe is trying to encourage a paperless world, and our Acrobat product is an important part of that task.  So we thought it was counter-productive to actually print the document." I am not making this up. Two of their CSRs stated the same thing, which makes me think that this is a "talking point" they've been given from someone in product marketing to cover the fact that someone screwed up and didn't get the books printed.
    I finally got one of the CSRs to admit that, in fact, they actually did produce the manual - just like the others - and you can download it yourself.  After a good bit of search, I finally found where it's located.  In case you're looking for the same thing, here it is:
    Download Help PDF( 27MB)
    It's the full 519 pages of documentation that should have been published - just like all the others I bought.  This is just an oversight by someone at Adobe, plain and simple.  The CSR told me that I couldn't order the printed bound version.  But something tells me this is probably not the case - Adobe's probably just behind in getting books like this one published.
    If anyone knows another avenue to communicate with someone at Adobe who's better informed than the CSRs I spoke to earlier, please let me know.  I actually have more faith in Adobe to do the right thing and make good on sending me the book that I've already, in essence, purchased from them.  If they're behind, that's okay.  We all make mistakes.  But to give the lamest of excuses is intolerable.  Insulting, to say the least.
    And someone in their marketing department ought to know better.

    Additionally you can get the same content by going to Help>Adobe Acrobat 9 Pro Help... which takes you to the HTML help files in the product or you can go to the direct link on the web  at http://help.adobe.com/en_US/Acrobat/9.0/Professional/index.html or via the Acrobat Community Help.
    http://www.adobe.com/support/acrobat/

  • Another user-modified table 'Users'(OUSR)(ODBC -2039) [Message 131-183]

    Hi All
    This error "Another user-modified table 'Users'(OUSR)(ODBC -2039 [Message 131-183]" happens when trying to change the manager password, I'm able to change the manager password for all the other databases on the server except for one.
    I have logged in using another Superuser account to try and reset the password of the manager account but SBO is having none of it and I get this error.
    Does anyone have any ideas?
    Many thanks
    Hayden
    Edited by: Hayden Nothnagel on Oct 6, 2009 4:37 PM

    Hi Hayden,
    You may check SAP Note 941116 and 1131133 and also these threads:
    Another user modified table (NNM1) (ODBC-2039)
    another user modified table
    Another user-modified table
    Thanks,
    Gordon

  • Still Images & Need to 'Scale to Sequence'-Vertical vs. Horizontal Picture

    I make sequences from still images only. I need to start editing with all images at a Scale (in the Basic Motion section) of 100. When the original image is 720 width x 540 height (a picture taken horizontally), it appears in the timeline at a Basic Motion:Scale of 100 (this is what I want). However, when the original image is 405 width x 540 height (a picture taken vertically), it appears in the timeline at a Basic Motion:Scale of 112.5 and overflows the top and bottom of screen.
    For these vertical images, I can then set the Scale manually, or use "Scale to Sequence" and get it to start at 100, but would like to avoid that extra step. Any ideas on how to have all imported images start at a Basic Motion:Scale of 100, whether taken vertically or horizontally?
    Thanks, in advance, for giving this problem any thoughts.

    I think that your best bet would be to
    1) make the images all the same size - adding black to the edges if necessary. You could add an alpha channel on the ones that you had to add black to the edges.
    or
    2) copy the motion settings from a still that is scaled correctly.
    or
    3) grin and bear it.
    I created a file earlier this morning that FCP didn't scale, but now I can't duplicate it. All the files are getting scaled. According to the manual, FCP isn't supposed to scale past 100%, but they might have changed that with a revised version.
    Good luck!
    Leigh

  • Function module to modify the user roles & profiles

    Hi All,
    I am working on user maintenance and i need a function module to modify the user roles & profiles.
    Thanks in Advance.
    Phani.

    i used the below fms
    BAPI_USER_ACTGROUPS_ASSIGN for assigning the roles.
    delete the profiles of the user qnd assign the profiles to the user:
    BAPI_USER_PROFILES_DELETE
    BAPI_USER_PROFILES_ASSIGN
    i used the above FMs for my requirement.
    Regards,
    Phani.

  • Batch Sequences missing

    Why is Batch Sequences missing from my Acrobat > Advanced > Document Processing menu?

    Standard or Professional? Why haven't you updated to 8.1.2? Is this the trial version?

  • HELP !!!  "Cannot modify the user entry because no matching user was found"

    I have read all I have found about ISW (identity synchronization for windows).
    However I keep bumping into this exact same problem. I am desperate since I cannot seem to
    figure out the cause. Can someone please help a very desperate person ??
    On the AD side the user test5 resides in an OU called "Admin Users". Even if I add test5 into the windows OU of people it still does not work.
    Solaris 10, update 8
    Directory Server 6.3.1 (DS)
    Identity Manager 8.1.0 (IDM)
    System Identity Synchronization for Windows 6.0
    MySql 5.1.41 (CE)
    /// Warning message
    [28/Dec/2009:10:47:18.197 -0500] WARNING 19 CNN101 idmserver "Cannot modify the user entry because no matching user was found, action=Type: MODIFY SUL: SUL1 {Data Attrs: [REPL unicodepwd: ****]} {Other Attrs: cn: test five nsuniqueid: df2cb501-ef1e11de-8029a367-1c30f1b6 objectclass: top, person, organizationalPerson, inetorgperson, account, posixAccount, shadowAccount, machineuser, dspswuser dn: uid=test5,ou=people,dc=host,dc=company,dc=com changenumber: 27323}." (Action ID=CNN100-125D5CFBF36-13600, SN=5)
    /// SUL definition
    Sun Java System=> Directory source: dc=host,dc=company,dc=com Base DN: dc=host,dc=company,dc=com
    Windows => Directory source: host.company.com Base DN: dc=host,dc=company,dc=com
    /// unix ldap information
    root@idmserver /: ldaplist -l passwd test5
    dn: uid=test5,ou=people,dc=host,dc=company,dc=com
    givenName: test
    sn: five
    loginShell: /bin/bash
    machinegroup: admin
    uidNumber: 1427
    gidNumber: 10
    objectClass: top
    objectClass: person
    objectClass: organizationalPerson
    objectClass: inetorgperson
    objectClass: account
    objectClass: posixAccount
    objectClass: shadowAccount
    objectClass: machineuser
    objectClass: dspswuser
    uid: test5
    gecos: test five
    cn: test five
    homeDirectory: /net/host/vol/vol1/home/test5
    userPassword: {crypt}SQDp2i8F9mAyc
    // AD windows ldap information
    Dn: CN=test five,OU=Admin Users,DC=host,DC=company,DC=com
         objectClass: top; person; organizationalPerson; user;
         cn: test five;
         sn: five;
         givenName: test;
         distinguishedName: CN=test five,OU=Admin Users,DC=host,DC=company,DC=com;
         instanceType: 0x4 = ( IT_WRITE );
         whenCreated: 12/28/2009 16:46:55 Eastern Standard Time Eastern Daylight Time;
         whenChanged: 12/28/2009 17:29:52 Eastern Standard Time Eastern Daylight Time;
         displayName: test five;
         uSNCreated: 36921;
         memberOf: CN=Domain Admins,CN=Users,DC=host,DC=company,DC=com;
         uSNChanged: 36935;
         name: test five;
         objectGUID: 1210235b-61b4-4fd8-bc4b-7455d1e31554;
         userAccountControl: 0x200 = ( UF_NORMAL_ACCOUNT );
         badPwdCount: 0;
         codePage: 0;
         countryCode: 0;
         homeDirectory: \\server\profile$\test5\home;
         homeDrive: H:;
         badPasswordTime: 01/01/1601 00:00:00 UNC ;
         lastLogoff: 01/01/1601 00:00:00 UNC ;
         lastLogon: 01/01/1601 00:00:00 UNC ;
         pwdLastSet: 01/01/1601 00:00:00 UNC ;
         primaryGroupID: 513;
         profilePath: \\server\profile$\test5\profile;
         objectSid: S-1-5-21-2511962931-1144655276-2379676629-1153;
         adminCount: 1;
         accountExpires: 09/14/30828 02:48:05 UNC ;
         logonCount: 0;
         sAMAccountName: test5;
         sAMAccountType: 805306368;
         objectCategory: CN=Person,CN=Schema,CN=Configuration,DC=host,DC=company,DC=com;
    Edited by: mightbe on Dec 30, 2009 8:22 AM

    Hi,
    This might be a stupid question but what happens when you perform a recon against AD? Once complete does the index list the account as confirmed, unknown etc?
    Ant.

  • My Canon SD970 IS digital camera user manual is missing......

    Well now I'm dead. I cannot find the User Manual for my Canon SD970 IS digital camera, I've Googled for user manual downloads, to no avail. I have never taken video with it and need the manual to learn how to take videos on it. 8-(
    ~L

    I don't know how I missed that at the Canon site -- probably careless reading when seeing the IXUS NUMBER (990) and passing over it, not knowing that Ixus 990 is the European name and number --- but mostly just careless reading.
    I will do reading from this PDF form and print out relevant pages,but still would like to buy a paper booklet that I can stick in my purse.
    Thank you again. You solved my issue.
    ~Lorna

Maybe you are looking for

  • Synching ical with ipod

    when I synch my ical with my ipod I can't get my "notes" for an event to show up on more then one line. I tend to have quite a few notes that would be nice to access. Is there some way to put "enters" into it so it's readable on my ipod? Thanks!

  • Payment Card Industry Data Security Standards Requirement

    We store credit card numbers in our CRM and ERP systems for billing purposes. We use Delego software for credit card security. We also mask the credit card numbers during display. According to our interpretation of section 3 of the Payment Card Indus

  • How can I use percentages except pixels in Muse?

    I can't find the way to use percentages in muse, If I use only pixels, my website will not adapt to different sizes depending on the screens. Please help me.

  • ITunes 6.04 blipping or hiccuping a lot

    I'm noticing that since I upgraded to iTunes 6.04, I'm getting lots and lots of hiccups or blips in music. This phenomenon occurs whether I'm streaming music from a radio connection, playing back MP3 of AIF from a CD, or listening to the same cuts on

  • When I make a video with my iPad, is it sent to the Cloud? Thanks for your help!

    When I make a video with my iPad, is it automatically sent to the Cloud? Thanks for your help!