Scaling Automation in selected regions?

I know how to scale automation for a whole track using the command key and and the automation fader, but how do you do this for a selected region of a track? say maybe 20 bars in the middle of the song on track X? I did a search here and couldn't find anything that helped, I apologise if this is an obvious question, but I would love the answer...

Shift-rubber band select the group of nodes you want to adjust, and drag your selection up or down.

Similar Messages

Repeating automation together with region?

How can I when I' m repeating a region on a track also get the automation in the region repeated?
Message was edited by: Ron H.

1. You can Export the region *as a new audio file* and use that instead of the original region. Put it on a new track and you can use the RR command no problem!
(You can also put it on the same track, but then don't forget to delete the old automation.)
2. I haven't tried this yet, but it should work: open the *Automation Event editor* with ctrl-⌥-E . Then open a new Arrange window, ⌘-1. This new arrange window displays regions exclusively containing automation, so anything you do here only affects automation. The Repeat regions command should work on those automation-regions too.
3rd (old option) copy the original region by ⌥dragging. Select both. Dragcopy. Select all four. Dragcopy. Etc. In five steps you can make up to 32 copies.
remark: I think it is an oversight that the Repeat Regions command does not 'listen' to the Copy Automation with Regions-preference. Another feature/fix request to send to Apple.
regards, Erik.

"Move Current Track Automation Data to Region" doesn't work for all

I have been using the 'Move Current Track Automation Data to Region' and while it works fine for some types of automation data like channel volume, pan and some plugin parameters, it doesn't work for all of them.
I haven't done exhaustive research into which parameters work and which don't, but most of the parameters for individual voices within Ultrabeat don't - which is annoying as that is what I was trying to use it for.
Any ideas about this, or workarounds?

OK, well an update on this in case anyone's interested.
With some further experimentation I have discovered that this problem did not exist in Logic 7 - ie you can move current track automation data for individual Ultrabeat voices to the region.
It's also possible to move automation data for individual Ultrabeat voices using 'Move All Track Automation Data to Region,' so I suppose this is a kind of workaround, though it can be annoying if you don't want to move all track automation data.
I'm now assuming this is a bug in Logic 8; is there any way to convert a Logic 8 project to work in Logic 7, as this along with the touch tracks bug is making working in Logic 8 very frustrating?

My iphone apps shows price in indian rupees but not in dollars. My selected region and address is USA? How can i change it to dollar again

my iphone apps shows price in indian rupees but not in dollars. My selected region and address is USA? How can i change it to dollar again

my iphone apps shows price in indian rupees but not in dollars. My selected region and address is USA? How can i change it to dollar again

Automator to select e-mail sender and copy text on excel

I need to use automator to select e-mail sender, extract specific text and append it on an excel sheet. is it possible?
I have OS Snow Leopard; Mail; a Master Excel 2011 file; several Output Excel 2011 files for the output
I want Automator to check daily if new mails, on a specific account, have been received that match the mail address with a given list of names and related mail address in the Master Excel.
If a new mail is present, Automator should: pick up specific text in the mail body; select and open the related Output Excel file (each output Excel file is saved with the name linked with the e-mail address in the Master Excel); append the text on the given worksheet in the Output Excel file; save the output file.
This should be done with all the received mails that match with the Master Excel file
Is it possible do this kind of thing with automator? may be with the support of VBA for some parts?
I would appreciate any suggestion or idea to resources to investigate

Hi Stephen,
I had the same problem and it is a software bug.
SAP release for us a special sap note number 1278473 - "Followup E-mail doesnot contain text of Notes of Activity".
I dont know if this note was release for all customer, but you can open a message to sap asking help.
My message at sap was 946981/2008.
Regards,
Lalas

How to directly write values in a selected region?

Dear Experts,
I'd like to directly write values in a selected region, such as PUT function in MS version.
Because I would like to trigger the When statement by target account.
Like:
*When ACCT
*IS Amount
*REC (EXPRESS = Qty * Price)
*ENDWHEN
Since I have to ensure the Amount account has already have data in oder to process this record, so did any experts have ever directly write values in a selected region?
Thanks in advance.
Best Regards,
Sally Hsieh

Hi,
You can use MDX statements to write values directly to the selected scope of dimension members.
The genereal syntax is,
[DIM_NAME].[#MEMBER_NAME]=<<VALUE>>
or
[DIM_NAME].[#MEMBER_NAME]=[DIM_NAME].[MEMBER_NAME](Operator)[DIM_NAME].[MEMBER_NAME]
Example,
[P_ACCT].[#X]=1000
[P_ACCT].[#X]=[P_ACCT].[Y]+[P_ACCT].[Z]
EXPRESSION inside REC statement can be used in same way along. For arithematic operations in EXPRESSION you need to use LOOKUP for fetching the other values.
Hope this helps,
Regards,
G.Vijaya Kumar

When adjusting the audio volume in a selected region, why does it give me a curved line instead of straight and why cant I change it like i can with a fade in our out?

When adjusting the audio volume in a selected region, why does it give me a curved line as a transition instead of straight, and why cant I change the fade shape like i can with a fade in our out? When I slide thet volume all the way down it makes a very abrupt down curve. It's audibly noticdible.
Thank you.

Use the range selection tool and select the portion of the clip you want to change the volume on. Drag the volume line down and FCP will create keyframes which you can adjust as you want to get a fade shape.

Unable to create federation in below two subscriptions due to error..."The required VM size or combination of VM sizes is not currently available in the selected region"

Hi, We recently created new Azure subscriptions and Hosted Services, and now trying to create federations. We are getting and error "The required VM size or combination of VM sizes is not currently available in the selected region". What does this
mean and how can we resolve this to create a federation successfully? BTW, we use a SQL VM and not a standard A1, A2 types VMs and we have already set the DisablePackageValidation flag to true in these subscriptions.
Thanks,
-ven

Hi,
This is a sql azure issue. You also post this question on SQL azure forum. From error message, you need make sure your VM region is in one location.
see this:
http://msdn.microsoft.com/en-us/library/azure/hh597470.aspx
-Billgiee

Select regions on track selection bug

Sometimes it works, sometimes not. This appears to be related to comp tracks for some reason. Anyone else getting this?

Could it be that you have "cycle" enabled? If so, logic will only select regions between the left and right locators.

Cannot save the selected regions

I'm just trying to set up a site for a client. I don't use Dreamweaver so I'm trying to create editable regions in the browser, following the instructions (http://help.adobe.com/en_US/InContextEditing/Administrator/index.html#editable).
When I put a tick in the checkbox and click on Save, I get an error message: "You cannot save the selected regions, etc". The region is not dynamically generated - in fact this is a very simple static page with no scripts at all, nothing complicated. Here's the URL: http://www.artonhart.com.au/guestbook.html
The region I'm trying to select is a td, id=guestbook.
What to do?
Jen

Well... as for the table structure thats not exactly correct. The proper way to code a table is as follows
Please read this thread: Re: Editing a Table using ICE
define div
     define table
          define table body (create a repeating group if you have repeating cells)
          define table rows
               define table headings (can be editable if enabled)
               define table rows (enable repeating if you like)
                    define table data (create editable cells)
<div
id="repeating-table">
<table width="100%" id="Name_Table">
<tbody ice:repeatinggroup="*">
      <tr>
       <th width="331"> <h2>Column Heading 1 </h2></th>
<th width="76"> <h2>Column Heading 2 </h2></th>
<th width="58"> <h2>Column Heading 3 </h2></th>
<th width="50"> <h2>Column Heading 4 </h2></th>
<th width="50"> <h2>Column Heading 5 </h2></th>
<th width="42"> <h2>Column Heading 6 </h2></th>
<th width="55"> <h2>Column Heading 7 </h2></th>
</tr>
      <tr ice:repeating="true">
        <td
class="style-it" ice:editable="*">content 1</td>
<td ice:editable="*">content 2</td>
        <td
ice:editable="*">content 3</td>
        <td
ice:editable="*">content 4</td>
        <td
ice:editable="*">content 5</td>
        <td
ice:editable="*">content 6</td>
        <td
ice:editable="*">content 7</td>
      </tr>
</tbody>
</table>
</div>

How to mute selected region of a clip?

I know how to control volume of entire clip... But how to mute selected region of a clip?
Also I'm curious if iMovie'08 has some kind of audio frequency filter? My cam recorded it's lcd's whisltle sound. Is there a way to reduce it?

To mute a selected region of a clip in a project:
Select the region you want to mute by dragging the cursor while holding down the left mouse button. You should have a yellow rubber band around the portion you want to mute. You can adjust this further by grabbing the handles on either side of the yellow rubber band.
Now, select Edit/Split Clip. Your one clip should have become three clips. Select the one that you want to mute. Click the audio icon and set the volume to zero.
No way I know of to reduce the whistle within iMovie. You can share your movie and open it up in a Garageband project. There, you can do editing on the audio track with all the GarageBand Tools.

Not selecting regions,when select a track???

Hi,
Is there any way when I select track in the arrange window,not to select regions on that track?
MacBookPro 1.83 DC 2 Gb;Logic 7.2.3;MBoxPro FW;G4;Pro Tools Mix+24; Mac OS X (10.4.8)

Thanks,but I wanna know is there any function in preferences to switch off and not to select regions when I select a track?Like in Pro Tools...
Now I work on 1h45min project-music for movie and when I select a track to auto zoom and I move a region 2bars on left on 40min. for example,when I back to beggining of the project,all regions are moved 2 bars left.I just don't wanna everytime,when i select track in arrange to click somewhere to unselect his regions...
sorry for my English

Automation in a region

I did this once a very long time ago on the logic trial, and I forgot how to do this. The manual doesn't seem to be helping...
I have a synthesizer channel strip, and in this one particular region I want to automate its cutoff frequency so that when the region is looped, the sequence of automation points is also looped. How do I do this
iMac G5 Mac OS X (10.4.8) Logic Express 7.2.3

Hi,
You can automate ANY plugin parameter at al, including the one you wanted (freq cutoff)
All you have to do is select it in the automation channel.
Read this whole chapter, and enjoy:
Manual, Chapter 7 page 225
Cheers

Select region in image / panel

Hi, I am displaying an image currently on a JPanel using the Graphics and BufferedImage class. Does anyone know of any method that i can use to select a region of the image. Also if the image has been scaled to fit the GUI, how will i know that the rectangle co-ordinates are accurate pixel representations ... Not sure if dat makes sense.
Thanx

You can use Robot to capture an image of the screen (or any portion), but it would probably be easier to simply draw to where you want the image, by passing the Graphics object you want to draw to into paint()

Select region in image

Hi, I am displaying an image currently on a JPanel using the Graphics and BufferedImage class. Does anyone know of any method that i can use to select a region of the image. Also if the image has been scaled to fit the GUI, how will i know that the rectangle co-ordinates are accurate pixel representations ... Not sure if dat makes sense.
Thanx

You can use Robot to capture an image of the screen (or any portion), but it would probably be easier to simply draw to where you want the image, by passing the Graphics object you want to draw to into paint()

Scaling Automation in selected regions?

Similar Messages

Maybe you are looking for