Scaling in rebates as for ECC 6.0

Experts can you please tell how to make use of scaling functionality added in rebates for ECC 6.0 version,
Pls tell by example how to apply scaling in rebates,from VBo1 to reflection of scaling in sales orders,practically not theoretically,
how to group conditions in rebates while scaling,
Pls tell step vise by example??
I   need your help.

HI,
In se38 ..give ur program name.
In menu Goto --> Documentation --> Change.
and press save.
Thanx
bgan.

Similar Messages

  • Transfer rules are not exist for ECC Quality source system in BI Dev

    Hi,
    I Connected BI Dev system To ECC Dev and installed the sales, purchasing,... data flow, but here i am not getting the quality data to show the reports, to get Quality data  I established the connection between BI Dev and ECC QA, while installing the transfer rules for the ECC QA data sources there no transfer rules are exist(only some of them exist) in the business content, but all the update rules,... are exist, when i right on the data source say create transfer rules it is proposing App praposal.
    When i select source system as ECC dev while installing the transfer rules i can see all the transfer rules, but when i select source system as ECC QA i can see only some transfer rules.
    only problem with transfer rules(some of them exist), for remaining all objects are properly existing in business content for ECC QA source system.
    Regards,
    chandra

    Hi Fayzrakhmanov
    Thanks for the quick reply. We are not moving the stuff to QA. We are only connecting QA ECC system to BI Dev. We already have datasources moved to ECC QA and created source system for ECC QA in BI Dev.
    The problem is I am not able to get Business Content transful rule for new source system. We I can find some but not all unlike development.
    Help on this would be appreciated.
    Thanks

  • Enter a business location for ECC 6 EHP 5 (Taiwan)

    Hi,
    While releasing the billing doc to accounting we are getting the error Enter a business location
    Message no. F5A192
    We are working on ECC6 EHP 5 and this requirement is for Taiwan.
    I have found the SAP Note; 376018, however this is valid for 4.6c ONLY.
    Could you please check and advise is this note is valid for ECC 6 as well. Or do we need to apply any other notes.
    Or any other suggestions.
    Thanks & Regards,
    Student.

    Hi,
    Please check the below thread.
    Error Enter a Business Location for Korea
    Regards,
    P Gomatheeswaran

  • Replication Issue for ECC BP to CRM BP

    Hello Experts,
    I am trying to Create a BP in ECC with transaction BP, but whenever i save the BP in ECC, the BDOC gets stuck in CRM with the error message that 'Grouping CUBP does not exist',
    Everything was working fine before, but recently we had created a copy of Account Group 001 for ECC customer for a Z accoutn group, we made all the required settings in ECC in transaction PIDE and then ran the inital load 'DNL_CUST_KTOKD' the new account group did come over to CRM in table CRMC_T077D and the account group is working fine, the customers created in ECC are getting replicated to CRM, but now the BP created in ECC does not gets replicated to CRM and give the above stated error message in the BDOC.
    PLEASE HELP!!

    Hello Shoaib ,
    In the CRM as well as ECC system in the customising SPRO :
    Cross-Application Components   >SAP Business Partner
    Business Partner   >Basic Settings
    Number Ranges and Groupings   > Define Groups and Assign Numbers Ranges
        >  CUBP Grouping could be missing in any one of the systems. Could you please check this.
    Thanks & regards,
    Krishnen

  • ST-PI and ST-A/PI Plug-Ins is it neccessary  for ECC 6.0 ?

    Hi Friends,
    Please guide me,
    In Early Watch Alert report, it recommends ST-PI and ST-A/PI Plug-Ins for ECC 6.0.
    Is this plug-ins really needed for ECC or not , if needed where( which scenario ) they are useful.
    Thanks ,
    VKP.

    Hi,
    I checked in our server i got this result
    No.   Missing addon/ transport / note
    1. [Note 69455  ]      Addon ST-A/PI 01M_ECC600
    2. [Note 69455  ]      ST-A/PI Addon Supportpackage SP01
    3. [Note 69455  ]      Proc. after addon impl.
    4. [Note 539977  ]     Addon ST-PI 2008_1_700
    5. [Note 539977  ]     ST-PI Support Packages
    6. [Note 12103  ]      Collectors and TCOLL
    Successfully implemented addons/ transports/ notes
    7. [Note 207223  ]   EWAlert setup
    1 to 6 add ons are they compulsory or 7 ( EW setup ) is ok
    Thanks,
    VKP.

  • Data Transfer Toolbox for ECC 6.0

    I am on ECC 6.0 and I am trying to install the data transfer toolbox (DTT) for HCM.  I installed the ERP05V4.SAR file (which is in the 600-ERP-DATA folder), but there are no DTT tcodes.  A colleague of mine told me he has used this in earlier versions of SAP (ECC 5.0) and he installed BPERPVD.SAR (which is in the 500-ERP-DATA folder) and the DTT was installed.   So it seems that this does not exist for ECC 6.0, but we need it so I am looking for help!
    I downloaded all of these files from OSS-downloads-SAP installations and upgrades-Enter by application group-SAP best practices-Best practices for my SAP all in one-SAP BP for HCM-HCM V1.500-installation.
    Thanks
    Mike

    Hi Michael,
    Were you able to get DTT installed for ECC 6.0? We are also, in the similar situation, trying to get DTT loaded in ECC 6.0.
    Thanks.

  • How to install the ADS for ECC 6.0?

    Hello All,
    I have few questions before I can start with my problem
    1) Is the ADS a part of the WAS for ECC 6.0 ?
    2) Is any Ehp available for installing the ADS separately?
    My requirement is to have a PDF application run in ECC 6.0 . I have no idea about the architecture like weather it includes the ADS as we have for Java WAS 6.0 SP 14.
    What my team is doing is deploying the application in the Java WAS currently. But they need to deploy it to the same server i.e. ECC 6.0.
    I would like to know what is the process to install the ADS in ECC 6.0. And if it is already installed then how to configure that.
    Let me know if you have any questions. Looking forward to you.
    Regards
    DK

    Hi Dipendra,
                         For running the Adobe application You need to configure some thing in both Java as well as in ABAP stack for that abobe form application to work. You need to do some configuration in the Visual administrator for Java & also in the ABAP stack sidi using your SAP user id line creating ADSUSER , ADS_AGENT    user id creation and roles assignment and RFC destination creation etc..          
    Just refer these documents for the installation and post-configuration of Adobe Document Service on NW2004s.
    https://websmp105.sap-ag.de/~sapdownload/011000358700003982082006E/InstallADSNW2004s_Jun06.pdf
    https://websmp105.sap-ag.de/~sapdownload/011000358700005526362005E/ADS_NW2004s_SPS12.pdf
    https://websmp105.sap-ag.de/~sapdownload/011000358700005299622006E/ADS_SizingNW2004sV2_1.pdf
    You can start by read the note 736902 to get the credentials for the ADS.
    Hope this answers your question.
    Thanks,
    Greetson

  • What is the difference in SAPS requirement for ECC 6.0 (No EhP)  vs ECC 6.7 (EhP 7)?

    Hi Team,
    Hope you are doing well, Can you please explain the below points.
    1)      What is the difference in SAPS requirement for ECC 6.0 (No EhP)  vs ECC 6.7 (EhP 7)?
    2)     What is the split of SAPS between Core and RAM?
    Thanks in advance.

    Hi Deepak,
    We are not partner/ customer with SAP, so don't have access to tools.
    Can you please give theoretical idea about
    1)      What is the difference in SAPS requirement for ECC 6.0 (No EhP)  vs ECC 6.7 (EhP 7)?
    2)     What is the split of SAPS between Core and RAM?
    Thank you,
    Gopi Reddy

  • Download EhP4 packages for ECC 6.0 including EhP1 for NW 7.0

    Hi experts,
    I have the following problem. I must update an existing ECC 6.0 system to NW EhP1. I found it is not possible to update only the NetWeaver but the whole ERP 6.0 must be updated to EhP4. The system is registered in Sol. Man. as ECC with no usage types. The MOPZ does not give me the option to download EhP packages neither it shows in the list of SP the latest SPs for ECC 6.0 EhP4/NW 7.0 EhP1. All the upgrade guides state that only MOPZ in Sol. Man. should be used for download because of the delta upgrades and the generated XML file.
    Is there any other way to download the EhP4 packages and to upgrade the system except MOPZ and EHPI?
    Thanks!
    Pit

    If you have 32 bit system, you can use SAINT to apply EHP4, but you will need XML file from MOPZ anyway. I would suggest you to register your system in SOLMAN SMSY as ERP 6.0 system.
    Please check also:
    https://service.sap.com/erp-ehp
    and [THIS DOCUMENT|http://service.sap.com/~sapidb/011000358700000293582009E.PDF] will tell you more including setup in SOLMAN.
    You will find all information there.

  • Http RFC destination for ECC to PI Connection Error

    Hi,
    While doing the proxy runtime configuration http RFC destination for ECC to PI .
    I configure the RFC destination as  below ---
    Target Host --  PI Host 
    Service No  -- 50000
    Path Prefix --- /sap/XI/engine/?type=entry
    Login  Security Details
    User Id -- PI user id
    Password --- PI password
    While doing the Connection Test , I got the error "ICM_HTTP_CONNECTION_FAILED"
    I checked  T-code in ECC system SMICM  and ICM is in green status and I checked the services are activated in SICF transaction.
    Please let me know how to resolve this issue.
    regards,
    Rohit

    Hi Rahul,
    I checked  all service are activated in SMICM  and I configured the FQDN also.
    Now  I cofigured the Service No  --- 8000(http port no of PI) instead of 50000(J2EEport no of )
    Target Host --- hostname
    and did a Connection test...then I am getting a status as "http reponse 500" and status text as "empty http request received".
    pls let me know is it correct configured or not.
    regards,
    Rohit

  • SAP Best Practices - For ECC 5.0

    For ECC 5.0, can the best practices be installed on a SAP system? Would this be available via the SPRO implementation guide?

    Hi Devendra!
    For the Best Practices you can have all the useful installation and informations guides here.
    <a href="http://help.sap.com/">Best Practices for SAP</a>
    Choose here the Bast Practices tab on the line-menu.
    You have to eb careful while installing the BP -> you have to use all the time the right BP release according to your SAP release.
    I hope this helps you!
    Best regards,
    Zsolt

  • Best upgrade path for ECC 6.0

    Hello,
    We've been stuck on the base ECC 6.0 release for quite a while.  There hasn't been management support for the time/resources necessary to implement and test any upgrades.  We also have a lot of local modifications to SAP supplied programs that we're planning on phasing out so that we keep closer to standard.  This is one of the main reasons we haven't been able to upgrade because of the effort involved in changing processes back to standard.  There was also an unwillingness on specific parts of the user base to change their processes.   We're now in a position where business and reporting requirements are going to force a system upgrade.  We also need run a unicode conversion from non-unicode at the same time.
    As we're starting the planning process we're unsure of the best path to allow us to implement future upgrades as necessary.  I see that EHP 7 runs on a basis version of Netweaver 7.40.  Is upgrading to an EHP pack for ECC 6 better than upgrading directly to 7.4?  Can the unicode conversion be done at the same time?
    I looked over previous discussions in upgrades but haven't found something that seems to match what we're looking to do.
    Thanks.

    Good Day
    As you have an ECC 6.0 system then you need to do an EHP update on the system.
    The latest is EHP7. EHP 7 is based on SAP NetWeaver 7.4 so when you update the system to EHP 7 you will be on NetWeaver 7.4
    The most important thing here is that you need to have a supported OS and DB for EHP7 installation. From EHP6 there is a need to have a higher version of OS and DB.
    Check PAM for the supported OS and DB combination.
    https://service.sap.com/sap/support/pam?hash=pvnr%3D01200314690900005013%26pt%3Dt%257CPLTFRM%26ainstnr%3D012003146949000…
    Regarding Unicode conversion you may read this.
    2033243 - End of non-Unicode Support: Release Details
    If you want to do the Unicode conversion then you should follow CUUC.
    Regards
    RB

  • Oracle DB ver. for ECC 6.0

    Hi,
    We are just in the planning for doing an upgrade from
    4.6C to ECC 6.0.
    Our 4.6C is running on Windows and with an Oracle DB(9.2.0.7), kernelrelese is 6.20.
    The question is now, must we upgrade the DB to 10.2 or is this just "best practice". I have not found any document stating that version 10.2 is a must for ECC 6.0. Does anyone have any info about this.
    Thanks!
    Fred

    Dear Fredrik,
                  It is prerequisite to have oracle 10.2.x
        release of oracle database.ECC 6.0 doesn't support
        lower than 10.2.x not even 10.1.x.
                            So upgrade ur database before
         upgradation.
        Please revard me points if u find this answer helpful.
      Thanks & Regards
        Aditya Kumar

  • ABAP Keyword Documentation for ECC 6.0

    Hello,
    Can somebody point out the link to the ABAP Keyword Documentation for ECC 6.0?
    Thanks in advance.
    Regards,
    Reena

    Hi,
    Look into this URL:
    http://www.geocities.com/academic37/abap/abapindx.htm
    Rgds,
    Ramani N

  • Latest Support Pack for ECC 6.0

    hi friends..,
    What is the latest support pack for ECC 6.0?
    if known what is the Path in service market?
    Is there any way to upload the support pack in less downtime?
    Plz reply as soon as possible...
    Regards
    varun

    Hi Arun,
    First u have to clear what is the exact component in Ecc6.0 ,u want to download ?
    and what is the existing version of the component u are going to download?
    for example ,goto to status in Easy access menu and in that screen ,click the components - here u can able to see the components and else u want the brief summary of the existing level of the Components -> goto transaction SPAM->select All Support packages and click display!
    You can download from service.sap.com/swdc>download>Support Packages and Patches> SAP Application Components> SAP ERP>SAP ERP 2005>Support Package Stacks-->target stack 11(12/2007) is the latest for ERP 2005.in that u can find the latest patches for all the comnponents for ECC 6.0
    For quick uploading u dload all the supportpackages and move the dloaded supportpackages to usr/sap/<sid>/DVEBMGS<instance no.>/trans
    then use the command to uncar the patches at a time by SAPCAR -xvf "SAPK*" and upload it from goto SPAM->Supporpackages-> select from application server
    regards,
    S.Rajeshkumar

Maybe you are looking for