Scaling of Tab-Control do not work correct

When I use the option "rescale objects on the front panel when resizing" in the "window size" category inside the VI properties, then my tab control has a wrong behavior. When I increase my window size, the tab control increases correctly. When I decrease it again, the tab control do not decrease and overlays the other controls.
Also a horizontal decoration line becomes a transversal line and my string control seems to scale different from the other controls so I get overlay effects again.
Does anybody know some hints how I can fix this ? If not this feature is not usable and I get some problems with customers with different monitor resolutions.
Many thanks for any idea
Thomas

Yes, there is a known issue with the scaling of tab controls with the window size. This will be fixed in the next release of LabVIEW. For now there is a workaround that might help:
Only scale the tab control as the panel resizes. Leave the "Scale all Objects on front panel as the window resizes" unchecked. Select the tab-control and go to edit->Scale Object with panel. This will not scale the objects within the pages.
In general please refer to this document for further information about misplacements that may occurr with the rescale option.
Best regards,
Jochen Klier
National Instruments Germany

Similar Messages

Parental Controls are not working correctly. Websites I've listed under Allow Access are still blocked. How can I fix this?

Parental Controls are not working correctly. There are websites I've listed under Allow Access, however they are still blocked. - such as: Yahoo mail and USAA banking. How can I fix this?

Hendry
Just thought I'd let you know. Our suspicions were correct, it was the OS. After I installed Snow Leopard (10.6.8) all the problems were corrected. I also updated the RAM from 1 gb to 6 gb. The mac is working all around better. Sorry it took so long to get back to everyone. My superdrive had pooped out. Rather than replace it I got an external drive from OWC connected with firewire 800. So far everything is running very well, as far as I can tell this external drive is better than the original superdrive. My superdrive has always acted funny, infact I returned the first mac I got after a week because its superdrive was also malfunctioning. Anyway, all that to say everything seems to be fully functioning again.
Roy
Re: Function keys are not working correctly

Crystal Export Tab Text (TTX) Not working correctly in program using Objects Driver XI

I have created a report in Crystal 2013 that I need to export as a tab delimited file for import into QuickBooks. If I run the export from within Crystal 2013, the export works fine. All the data is there delimited by tabs. Each field is set to "Can Grow".
The image in Excel shows I am in cell A3 and it has only one item in it TRNS, each field is in its own column.
We purchased software that uses the Business Objects XI Driver (the Crystal Redistributable program). When I run the program to export the data (the software only lets you export this report) and choose tab delimited, none of the data is delimited, it is all concatenated together in one big long string for each line.
If the data is longer than the field length in Crystal, the "Can Grow" option moves all the extra information to line 2, and all fields that had extra data and went to line 2 is concatenated together in one string. And if the data went to a line 3 it concatenated all the line 3 data together.
The image in Excel shows I am in cell A3 and it has everything on row 3 combined into one string, data that is not set to "Can Grow" is cut off like the date which is showing 6/13/20 (does not show the 14) and it continues to the 1100 (which is the General Ledger code, but cuts off "Account Payables"). The company name is set to "Can Grow". The company name is CASTS CAST SERVICES AND MACHINGING. You can see CASTS CAST on line 3 but the rest of the company name moves down to row 4 and 5.
If I export the file from the software as txt, I get the same thing as exporting it as tab delimited.
I cannot figure out why this is doing this.

Hi Les,
Unfortunately CR XI is end of life and end of support so we can't get any patches to you, if one existed for this issue or not.
Only option is to ask them if they have an update to current supported CR Versions and runtime, CR 2011, 2013 and the runtime is CR for Visual Studio.
FYI, your TTX in the title is NOT the correct acronym to use because we had a legacy export type to ttx file format, it's no longer supported at runtime, so you you should refer to it as Tab Delimited and not TTX.
Don

Parental control is not working correctly

hi,
when I initially got my iMac, it seems the parental control I set up for my son's account was working fine with respect of the time allow to use the computer but not it does not work.
no matter what I tried (limit computer to use, weekend time limits, or bedtime), it does not work
is there any upgrade or fix for this?
thanks
adaltam

I have the same problem. If you've found the solution, please share.

Photoshop Scaling while holding shift is not working correctly. How do i correct that issue?

So im relatively new to The Creative Cloud Version of Photoshop, i know there are changes, but i've been having difficulties with the scaling. when i try to scale layer content or even object Photoshop will not allow me to have shift held down to make a perfectly,"Scaled" layer/object. i hold shift and it works more as a toggled button, and then when i let go the object doesnt stay scaled, sometimes it get inverted or reflected.
I've tried things to try to get it to work, i thought it had to do something with my keyboard but it is doing it arcross the board with all the keyboard's i tried.
Thanks for any responses that may come through.

What you describe is not commonly reported here. Therefore it seems likely something special about your particular setup. It might be helpful if you'd describe your system. The Help - System Info menu in Photoshop provides a pretty good text summary. I suggest copying that and pasting it into a post here.
Do you have any 3rd party plug-ins or extensions in Photoshop? If so, have you tried running it without them?
Since you know it works for others, have you considered doing a complete uninstall and reinstall? Something could be corrupted.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
-Noel

Spry tab not working correctly after custom changes

Hi,
i have used Spry Widget for making tabs in Dreamweaver for one of my project. i have customize these tabs. every thing was working fine until i add the horizontal scrolling to tab by jquery. tabs are not working correctly they do not show the tab content. i am sure there is some linking issue. all this problem begin when i added a addition div within the spry div tags if i remove <div style="overflow: hidden;" class="sc_menu" > every thing start working fine but this div control the scrolling and its important to put there. please can any one guide me what i am doing wrong i have uploaded the project to my server. below is the zip file link to download.
http://khurram.visbl.com/test.zip
please let me know if someone having problem in downloading above zip file. also waiting to find a solution for above. hope anyone is here who knows the solution
Best - Khurram

Sorry to disappoint, the structure of the tabbed panels is
<div id="TabbedPanels1" class="TabbedPanels">
<ul class="TabbedPanelsTabGroup">
    <li class="TabbedPanelsTab" tabindex="0">Tab 1</li>
    <li class="TabbedPanelsTab" tabindex="0">Tab 2</li>
</ul>
<div class="TabbedPanelsContentGroup">
    <div class="TabbedPanelsContent">Content 1</div>
    <div class="TabbedPanelsContent">Content 2</div>
</div>
</div>
As soon as you change that structure, this widget (out-of-the-box) will not work.
Gramps

SSRS 2008 R2/SSRS 2012 Tab Delimited setup is not working correctly in Report Designer

I have changed a RSReportDesigner.config to add a tab delimited option for report export, but it is not working correctly in vs2008/vs2010 report designer. I get a duplicate of CSV (comma delimited) in the export dropdown list.
I have tested SSRS 2008 R2/SSRS 2012 on Windows 7 64 bit professional.
It is working correctly in the report manager.
<Extension Name="TAB" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering">
       <OverrideNames>
           <Name Language="en-US">TAB delimited</Name>
       </OverrideNames>
       <Configuration>
           <DeviceInfo>
               <FieldDelimiter xml:space="preserve">	</FieldDelimiter>
               <Encoding>ASCII</Encoding>
               <UseFormattedValues>False</UseFormattedValues>
               <NoHeader>False</NoHeader>
               <FileExtension>TXT</FileExtension>
           </DeviceInfo>
       </Configuration>
      </Extension>

Hi Dave0323,
According to your description, you want to export your report into TXT file and change the delimiter to be a Tab. Right?
In Reporting Services, when exporting to a CSV file, we can change the default field delimiter to any character that we want, including TAB, by changing the device information settings in the configuration file. For example, to use TAB,
update the FieldDelimiter setting to <FieldDelimiter xml:space="preserve">[TAB]</FieldDelimiter>. And we can change the FileExtension to be TXT if we want to export it into a TXT file. So in this scenario, we just need to modify the configuration
file like below:
The result looks like below:
Reference:
CSV Device Information Settings
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Title & Menu Buttons not working correctly on remote control/ set top player but work in preview.

Title & Menu Buttons not working correctly on remote control/ set top player but work in encore preview. This only happens for a Blu ray project. When a user presses the menu button it should go to the previous menu they were on but it goes to the main menu. When they press the title button they should go to the main menu but it doesn't do anything. My DVD projects work as expected.I've tried creating a new "test" project with different footage and still get the same undesirable results.
Overrides grayed out and set to "not set" for timelines and menus.Project settings and build are set to blu ray. Also I've noticed when I preview a Bluray project the preview window shows a red colored disc next to the Title button when viewing the timelines and green when playing the menus but not so for a DVD project it displays red if motion menus and or timelines are not rendered/encoded. I'm not using motion menus and all the media is encoded according to the project specs.
I've searched this forum but couldn't find the answer. Any help or redirects to a solution would be appreciated. Working with CS5. Thanks.

I found out on my Samsung Blu ray player the remote has a tools button on it that brings up audio, angle, chapter selection etc.and also title selection which is actually the menus and the timelines unfortunately. It's not as easy or direct as last menu selected but it's a workaround at least. I also plan on using a pop up menu. I'll let you know.

Latest QT & iTunes installed, but not work correctly

I had installed latest version QT7 & iTunes 6.05, however, both of them not work correctly. For QT, it can play video with "looping - delay & sound impediment" audio; the video seems ok. My iTunes has the same problem, I just wonder this is because of QT.
Hope some body can help me to solve this problem.

hmmmmm.
quit itunes and/or quicktime.
try opening your Sounds and Audio devices control panel. click on the Audio tab.
in the sound playback area there, click on the "advanced" button. click on the "performance" tab.
try moving the sliders towards full and best. click okay.
check on the sound quality in itunes and quicktime again.
any improvement?

How can I Create a exe file were a tab control on it work`s

I have a VI with many controls and indicators,these are spread on a tab control.This tab control works with out any problems but if i create a exe file then the tab control is fixed. How can I create a exe file so that the tab control on it work´s ?"
Attachments:
project7.1.jpg ‏129 KB

Make the tab control a control and not an indicator. If you want to write
to it you need to create a local variable.
"Carlos-R." wrote in message
news:[email protected]..
I have a VI with many controls and indicators,these are spread on a
tab control.This tab control works with out any problems but if i
create a exe file then the tab control is fixed. How can I create a
exe file so that the tab control on it work´s ?"

Control center not working on iPhone 6 plus when in landscape mode

I has a iphone 5 before it , and there's no problem with the control center, now with this expensive iPhone 6 plus , the control is not working when the phone is in landscape mode , when the screen tapped repeatedly, I can only see the little tab of the control center but I can't able to bring it up.
Anyone has this problem?

Hello torontonightowl,
Thanks for using Apple Support Communities.
For some initial troubleshooting on this issue where you're unable to open the control center on your iPhone, please first restart your iPhone, and if the issue persists then reset the iPhone.
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Cheers,
Alex H.

Function keys are not working correctly

I've been looking all over the various threads and I can't find an answer that solves my problem.
Here are the details:
I bought the computer in the U.S. where I live.
I have a iMac 2.4GHz intel Core 2 Duo EMC 2133 with a 20" screen. Bought it new in February 2008.
I have Mac OS X 10.5.8 (I am waiting for my order for OS Snow Leopard to come in!!)
I have been using a wireless mouse and Keyboard (Love not having cords!)
Recently, my wireless keyboard got a short and quit working. I went down to the apple store and got a new wireless keyboard.
I had the computer with me at the genius bar so, yes, the apple employee saw exactly what I have.
I took it all home got the thing all put back together and got the new keyboard paired up and working with the computer.
Here are the problems:
Went to go use the function keys while using iTunes and found they weren't working properly. The F10, F11 and F12 do not control the volume of sound as the keyboard indicates they would, they instead activate dashboard, spaces, and application windows.
Following the advice of other threads, I looked over in the system preferences and made sure the "Use all F1, F2 etc." box was unchecked (it was unchecked), things still didn't work.
I tried the fn key but it appears to not work at all it has no effect on the functioning of the function keys.
I went under keyboard shortcuts in system preferences and found the F10, F11 and F12 keys, it confirms that those keys control spaces, dashboard and application windows as they are performing but shows no options to either reassign to volume control (as marked on the keyboard) or make the fn key work.
I've gone back and forth trying various combinations of checked and unchecked boxes to see if anything would work, so far I've come up with nothing.
A couple more important or interesting facts:
Yes I have turned off and taken the batteries out of the old keyboard. My bluetooth connection currently shows it as disconnected.
I have restarted the computer.
One thing I find odd; when I go under preferences and go to Keyboard and Mouse when I go under the section "Bluetooth" it shows Bluetooth mouse with the name of the mouse and the battery level. BUT nothing is showing up under bluetooth Keyboard, I can't figure out how to change this and don't know if it is contributing to the problem.
When I go under the bluetooth logo on the top bar I find the mouse and both keyboards referenced, the old keyboard is shown as disconnected and the other two are connected. I have tried to update the device's name but it doesn't seem to let me.
I have double clicked on the device under bluetooth and it shows the new keyboard as discoverable, paired and connected. Hence, I am using the new keyboard to write this inquiry.
Please, any assistance would be of great help. I have tried to be thorough in order help narrow the possible problem. Thanks!!

Hendry
Just thought I'd let you know. Our suspicions were correct, it was the OS. After I installed Snow Leopard (10.6.8) all the problems were corrected. I also updated the RAM from 1 gb to 6 gb. The mac is working all around better. Sorry it took so long to get back to everyone. My superdrive had pooped out. Rather than replace it I got an external drive from OWC connected with firewire 800. So far everything is running very well, as far as I can tell this external drive is better than the original superdrive. My superdrive has always acted funny, infact I returned the first mac I got after a week because its superdrive was also malfunctioning. Anyway, all that to say everything seems to be fully functioning again.
Roy
Re: Function keys are not working correctly

Share point in server admin not working correctly... I think

I suspect that the share point in server admin is not working correctly. In workgroup manager when I click on a user and then click on the "home" tab, under the full path field I see a file path of:
afp://server.mydomain.com/Users
However if I go to Server Admin -> AFP -> Share Points then click on the Users share and then click on the share point tab below, enable auto mount is disabled. How can this be possible? I thought for a directory to show up in home in workgroup manager it had to be set as an auto mount. Has something possibly corrupted? And what?

Here's a bit more information about our setup and our experiences with Apple's CUPS implementation:
On the server, all printer queues are set up with only lpr and ipp sharing enabled with the PPD setting for each printer set to Generic Postscript. We found that setting the PPD to the printer specific one on the server caused problems when clients tried to use printer specific options, like paper tray selection, etc.. The selection would be undone, apparently because the driver on the server would override the previous settings. Using Generic Postscript allows the client PPD settings to go through unmodified. Our printers are general a mix of HP LaserJets and some Sharp Copiers.
All clients use lpd to the server queues with the printers' actual PPDs configured. Using ipp is superior in that printer feedback (jams, out of toner, etc) makes it back to the clients, but ipp only works when the client, the server, and the printer are on the same network. If the ipp client is not on the same network, the client spooler immediately goes into a paused state and the print job is stuck on the client.
Using lpd to the server queues works reliably, but there is no feedback to the client. Jobs disappear from the client queue and go to the server, appearing to the user as a successful print. If the printer is down, there's nothing they can see or do about it.

Substitution rule is not working correctly

Hi PS Gurus,
We have a problem in one of the newly created projects that the substitution rule is not working correctly; the data is not copied to the WBS element Cust. Enhancement tab.
Project 1 is working fine and the data is copied & Project 2 and Project 3 are not getting all the data copied to the WBS element,
In that project profile (substitution rule is given), substitution rule is also maintained
So please help why in one project substitution rule in working & other isnu2019t.
Many Thanks in Advance.
MM

Hello Menaka,
Select the WBS element in the project builder.
Cleck on Edit --> Validation Substitution --> Substitution
You will get the list of Substituitions, Double click on the required Substition rule.This action will generate a log, whether substitution has been succesfully caried out or with some error.
Kindly provide us that error log to guide you further.
Regards
Ravi

Sound blaster not working correctly?

Sound blaster not working correctly #I have a 64 bit, windows vista system.
A Logitech Z-5500 Digital speaker system (one woofer, center speaker, left, right, rear right, left rear speakers, and a seperate control head).
I have an X-fi gamer sound card.
I recently formatted my hard dri've and reinstalled everything. Trying to make everything happy again. Here is my problem:
When I use the Creative Console Launcher (CCL), my front right speaker tests fine. My front left speaker comes out of the woofer. And no other speakers will test at all. It does this in all modes (2., 4., 5. and 7.).
When I play some music, it is coming out of all of the speakers. But it won't test properly in the CCL. So, do I have an issue, does what the CCL is doing not matter, or something else In some games, hearing what direction stuff is coming from matters, so if it is sending sounds to the wrong speakers, then I need to figure out a fix.....hence my post.
Thanks for any help you can give, Robert

Well, as the official documatation states, the Archlinux is for more or less advanced users, and if you're not one, we will make you one
First of all, if you compiled your sound as modules, try putting this in your rc.local:
stat_busy "Activating Sound"
/sbin/modprobe your_sound_module
/sbin/modprobe other_sound_module
/sbin/modprobe yet_other_sound_module
stat_done
Change your_sound_module stuff to your module names as you configured in the kernel, of course.
Second: in order to have two or more sound apps working at the same time, you need some kind of sound server. For default one (esd), uncomment esd in /etc/rc.local (remove ! before it) . After that, you'll have to configure your sound apps to use esd. I know that this is extremely easy with xmms and xine, dunno about others. I do not use esd, because my favorite games (quake3 and half-life) require direct access to /dev/dsp.
And remember: nobody blames for asking 8)

Scaling of Tab-Control do not work correct

Similar Messages

Maybe you are looking for