Scaling your Mapped BW RFC destination to the APS DF Service

Hello Semantic People!
If you are creating a UNX universe connecting to BW through the IDT and you have manually mapped your RFC destination to an Adaptive Processing Server Data Federation Service then you might be interested a new Wiki Page: RFC Connections Mapping Scalability
RFC Connections Mapping Scalability - Business Intelligence (BusinessObjects) - SCN Wiki
and kbase 2028364 - RFC Connections Mapping Scalability:
https://support.wdf.sap.corp/sap/support/notes/2028364

Problem resolved once after SAP server is restarted. RFC destination test was also successful and I was able to retrieve data in Web Intelligence

Similar Messages

Service desk RFC destination in the Satellite system

HI All,
can any body tell me the RFC destination that is to be maintianed in the satellite system so that the message reaches the solution manager service desk.
I am creating messages they are being send to the service desk successfully but are not visible when I go into the service desk of the solution.
But they are visible through the transaction code CRM_DNO_MONITOR .Can any body help the RFC destination to be maintaned in the BCOS_CUST table so that the message reaches the Service Desk.]
Currently I am using the RFC destination to the service desk client in the solution manager ie SIDCLNT200
Thanks in advance
Regards
Amit

Hi Amit,
I think your expectation is not correct. I understood, you can create a message in a satellite system and you can see the ticket in SolMan service desk. Then everything is configured correct. What you are now looking for is to see the ticket in a solution when the sat. system is part of the solution. This is not working. If you create out of a solution a service desk ticket, these ticket get a special attribute that they belong to this solution, all other tickets can not be selected by a solution.
Sorry but I am quite sure that it is working like this.
There is only one option, that you define special variants so you can see only tickets from special systems, but these variants can not be assigned to a solution.
Regards,
uDo

No rfc destination defined for global trade services error while doing migo

Hi all,
Pls help me in fixing the following error..
"no rfc destination defined for global trade services" error while doing migo

i guess you will be getting dumps in the background in ST22. Can you please check this and post the details if there are any dumps?
Meanwhile, check this note:
Note 1098491 - MIGO:Termination MESSAGE_TYPE_X with IO 304 (subcontracting)
Cheers,
Jazz

RFC destination for your third-party tool

Hello SAP Guru's,
I have recently established external db connect for an iseries database. Now developers wants to use the open hub destination to extract data to non-SAP systems. They are using API: RSB_API_OHS_3RDPARTY_NOTIFY to connect a third-party tool to the BI system and use this third-party tool to distribute data to other non-SAP systems. To do so they need RFC destination for the third party tool. Could you tell me which RFC connection i have to use in SM59 ? I mean is it ABAP connection or TCP/IP connection or HTTP connection to external server?
I would highly appreciate any help on this.
FYI:
I have already gone through below help link:
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/8de3f4743b22a8e10000000a1553f6/frameset.htm

This will be of type TCP/IP.
You will need to create an RFC server application on the thirdparty system, and implement this function there. You will need to define that server application in your RFC destination definitions (host/Program).
You may need to read up RFC server help documentation; you can also browse the SAPGUI subfolders for RFC server sample applications and C code (if you have installed GUI in full, there should be such subfolders on your PC). You can also ask for help on 'application server' or 'abap' forums for this.

HOw to find out the RFC destination from BW system to ISU

Hi,
Currently my requirement is to call a function module which is written in ISU (remote enabled) from BW system.
I am unable to find out the rfc destination from BW to ISU system.
In CRM we have table like smofparsfa1. Is there any table in BW which can provide me the ISU destination?
I need to compare the records stored in isu as well as in BW system.
I need to call a function module which will provide me the data from isu.
please help me in this regard.
Krishna

Hi,
You can check it in SM59 if there are any RFC destinations for the above systems.
Alternatively ,check the table RFCDEST if any entries are maintained
Regards,
Lakshman.

Regarding RFC destination

Hello,
I need to call a remote enabled APO function module from R/3. In the call i need to specify the RFC destination. The problem is:
The development R/3 system is connected to APO development system only, R/3 testing system to APO testing system only and R/3 production system to APO production system only. I want to write code in such a way that the RFC destination is identified automatically, ie, when it is run the program in R/3 dev system it picks APO dev system and so on.
Can this be achieved through some function module or using some tables. I tried RFCDES table. But it was not helpful. I want to avoid using the if...else check.
Thanks in advance,
CMV

Hi,
Why not create a custom table in which you map the R/3 system to the APO system. You can then read the table with your current R/3 system and get the APO system you need to connect with.
BR,
S.

RFC destination error in posting 3rd party payment in 4.7 FI system

Hi,
We are running in to a problem when we are processing a payment via transaction F110S in our R/3 4.7 system for Financials. We are integrating our Financial system with ECC6.0 for HCM. We receive 3rd party invoice from HCM successfully via ALE and post it in 4.7 system. When we try to process payment against this invoice, apparently 4.7 system is trying to communicate with ECC 6.0 system and issuing an error and the payment processing gets cancelled. It generates a clearing document with out a check.
The error says "An RFC destination could not be specified for the logical system HD1CLNT014
    Message no. B1550
Diagnosis
    An RFC destination should be specified for the logical system
    HD1CLNT014. This could not be done in this case. HD1CLNT014 is not your
    local logical system and this system is not included in the relevant
    Customizing tables.
Procedure
    Check:
        -   RFC destination
           -Port definition
         -oubound partner profile of message type SYNCH for this logical system
We checked our configuration for all Logical system and RFC destination and everything seems fine.
Any help in this regard is appreciated.
Thanks
Kesav

Hi David,
Did you check below is set-up correctly.
- Use transaction SM59 to create an RFC destinations for the remote system.
- Use transaction BD54 to create the logical system.
- Use transaction BD97 to link the RFC destination created in SM59 with the logical system created in BD54.
Also, check entries in TBLSYSDEST is filled with correct system name HPQCLNT210. Generally this error occurs when system name is incorrect in TBLSYSDEST.
Thanks,
Ameet

BPS retraction RFC destination conversion

Hello everybody,
I m surprised not having met a discussion about RFC destination conversion between systems for BPS retraction?
What is the common recommendation for BPS retraction to have your customizing adapted and to retract to your QUAL R/3 from your QUAL BPS system without having to replicate your customizing with hard coded RFC destination to allow every BPS system to retract to any R/3 system !! Why this does not read the RFC conversion table from BW, probably too easy ?
If you have feed back on this point I would really appreciate , many thanks .
Laurent Allais

Hello Laurent,
I agree, it would be nice if the system would convert the RFC destinations. The functionality is just not there. You can use a single RFC destination for all systems and just have a different server that it is pointing to in SM59.
Or you just make a change in BPS0 after the transport. It's quite common for plan administrators to have access to BPS0.
Regards
Marc
SAP NetWeaver RIG

RFC destination of receiver system

Hi Guys,
I am trying to do the shell creation from scracth, and now i have found on the RFC destination creation there are three RFC connection which needs to be define. But my question is in this step we dont have any receiver system becasue export files has not been generated yet that will come after this step, so how can i proceed.
Regards,
Subhash

Hello Subhash,
In the step 'Define RFC Destinations' you create the RFC destinations for the SAP systems that participate in your project (or subproject).
Yes, you are correct, since the target/receiver system is not yet created, you cannot establish a RFC for the same.
Please proceed by maintaining the following:
Server name, System number , Language, Client, Username and Password for the control and the sender system.
Best Regards,
Mridu.

Help with RFC sender, Program And RFC Destination

Hi!!
my scenary is asynchronous
     RFC Sender -> SAP-XI -> Oracle reciever
I have a problem with abap, especially rfc, program and rfc destination. The connection with SAP-XI exist and SAP-XI receive the message but the message is empty.
1. In my program on the line
          CALL FUNCTION 'ZBAPI_SD_PED_ORD_SERVIC' DESTINATION 'ZXI_ENVIAR_PED_ORD_SERVIC'
          catch an error system_failure = 2 and it dont execute the rfc ZBAPI_SD_PED_ORD_SERVIC
2. I rewrite my program, that line to
          CALL FUNCTION 'ZBAPI_SD_PED_ORD_SERVIC' STARTING NEW TASK 'NEW' DESTINATION 'ZXI_ENVIAR_PED_ORD_SERVIC'
          catch an error communication_failure = 1 but the rfc ZBAPI_SD_PED_ORD_SERVIC is executed but no send to SAP-XI
3. I rewrite my program, that line to
          CALL FUNCTION 'ZBAPI_SD_PED_ORD_SERVIC' IN BACKGROUND TASK DESTINATION 'ZXI_ENVIAR_PED_ORD_SERVIC'
          No error but it dont execute the rfc ZBAPI_SD_PED_ORD_SERVIC and the message in SAP-XI is empty, display the tables but not the row. i check the table PED_ORDEN and RETURN but the controls fields dont are afected.
What is my Error?
Where am i making a mistake?
RFC
FUNCTION zbapi_sd_ped_ord_servic.
*"Interfase local
*" TABLES
*"      PED_ORDEN STRUCTURE ZSD_RFC_T04
*"      RETURN STRUCTURE ZSD_RFC_R06
TABLES: zsd_ped_orden, zsd_rfc_r01.
DATA: tb_ped_orden LIKE zsd_ped_orden OCCURS 0 WITH HEADER LINE,
               tb_rfc_orden_error LIKE zsd_rfc_r01 OCCURS 0 WITH HEADER LINE.
*Get Pedido by Ordenes
SELECT * INTO CORRESPONDING FIELDS OF TABLE tb_ped_orden
          FROM zsd_ped_orden
          WHERE estatus EQ space.
LOOP AT tb_ped_orden.
    MOVE-CORRESPONDING tb_ped_orden TO ped_orden.
    APPEND ped_orden.
    tb_ped_orden-estatus = 'X'.
    tb_ped_orden-fecha_actualiz = sy-datum.
    tb_ped_orden-hora_actualiz = sy-uzeit.
    MODIFY tb_ped_orden.
ENDLOOP.
MODIFY zsd_ped_orden FROM TABLE tb_ped_orden.
COMMIT WORK.
*Errors in Ordenes
SELECT * INTO CORRESPONDING FIELDS OF TABLE tb_rfc_orden_error
          FROM zsd_rfc_r01
          WHERE estatus EQ space.
LOOP AT tb_rfc_orden_error.
    MOVE-CORRESPONDING tb_rfc_orden_error TO return.
    APPEND return.
    tb_rfc_orden_error-estatus = 'X'.
    tb_rfc_orden_error-fecha_actualiz = sy-datum.
    tb_rfc_orden_error-hora_actualiz = sy-uzeit.
    MODIFY tb_rfc_orden_error.
ENDLOOP.
MODIFY zsd_rfc_r01 FROM TABLE tb_rfc_orden_error.
COMMIT WORK.
ENDFUNCTION.
PROGRAM
REPORT ZBAPI_SD_PED_ORD_SERVIC.
DATA: ped_orden LIKE ZSD_RFC_T04 OCCURS 0 WITH HEADER LINE,
      return LIKE ZSD_RFC_R06 OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'ZBAPI_SD_PED_ORD_SERVIC' DESTINATION 'ZXI_ENVIAR_PED_ORD_SERVIC'
     TABLES
          ped_orden             = ped_orden
          return                = return
EXCEPTIONS
    communication_failure = 1
    system_failure        = 2
    OTHERS                = 3.
IF sy-subrc <> 0.
MESSAGE 'error' type 'I'.
ENDIF.
COMMIT WORK.
RFC DESTINATION
RFC Destination: ZXI_ENVIAR_PED_ORD_SERVIC
Connection TYpe: TCP/IP Connection
Register Server Program: ZBAPI_SD_PED_ORD_SERVIC
Gateway host: host00
Gateway service: sapgw00

hi
For rfc sender adapter we hv to do some settings .Please chk whether this settings are well configured or not.
a) RFC destination
b) RFC channel in the XI directory
This weblog is a response to a few question about the basic configuration of the RFC sender adapter
that were posted on the XI forum (and also on my e-mail)
So here we go, basically we have to configure 2 things:
a) RFC destination
b) RFC channel in the XI directory
RFC destination:
1. To create the RFC go to TCODE: SM59
2. Create new destination of type T (TCP/IP)
3. Make sure you select Registered Server Program option before writing your program ID
4. Write you program ID (remember it's case-sensitive)
5. In the gateway host and gateway service write the values of your "Application system" - business system (not the XI server)
7. No configuration in the J2EE administrator nessecary
Now we can proceed to RFC channel configuration:
1. Enter your Application Server
2. Your Application Server Service
3. Enter your Program ID from the RFC destination
And we're done:)
Now you can test the RFC destination in SM59 to see if it works.
Please chk this following link.
1. RFC Processing with the RFC Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/25/76cd3bae738826e10000000a11402f/content.htm
2. Configuring the Sender RFC Adapter -
http://help.sap.com/saphelp_nw04/helpdata/en/67/6d0540ba5ee569e10000000a155106/content.htm
3. /people/swaroopa.vishwanath/blog/2006/12/28/send-rfc-to-sap-xi-150-asynchronous
regards
Manas

Table to maintain RFC destination

Hi,
An RFC enable Function Module from R/3 is to be called in CRM system. I dont want to hard the RFC destination for the R/3 whn calling the FM. Is there any other table tht can b used for this?
Is there any other way to achieve this???
Regards,
Sivagami

Hi Sivagami,
Check the table RFCDES. This table will store all RFC destinations defined for your system. U can use the transaction SM59 to create the RFC destinations. But most of the developers dont have access to this transaction. So cotact ur basis team to define required RFC destinations.
Thanks,
Vinod

Crm xif creating rfc destination

Hi All,
I am going through the documentation of FM CRMXIF_PARTNER_SAVE.
I am stuck at the following point:
1. Create a suitable RFC destination in the SAP IMG Define Target Systems for RFC Calls (for example,a TCP/IP connection to the Business Connector).
My requirement is as follows:
I have to integrate the CRM SAP and salesforce for real time synchronisation of Business Partner data.
How to create an RFC destination ?
I am absolutely new to this.
Looking forward to ur support
Regards
Shilpi

Hi Shilpi,
There are various issues here. But, just to answer about RFC creation, you can do it through Tcode SM59. But, if you are new to this, I would suggest that you request your basis person to create that for you since it should be his responsibility.
From which system are you planning to call this FM? Usually people use this for data load in CRM in which case you dont need an RFC destination.
Regards,
Alin

Ignore pop-up in RFC destination

Hi all
In ruining program with RFC destination when the program comes to the RFC i get a pop-up
that ask for user and password ,how can i avoid that ,i want to ignore the pop-up and run the program until the end .
when i put the user and pass the RFC bring the data that i want.
BR
Nina

Hi,
When you create the RFC destination in SM59, you have to define your target system as TRUSTED system(One checkbox will be there). Then you will not get the pop up.
Regards,
Ravi Kanth Talagana

Table Required to define RFC destinations

Hi,
I am working on SAP PI/XI. I had created an Custom Function Module (RFC Wrapper) in XI or PI which calls Bapi's in SAP R/3.
So we specify the RFC Destinations in the code to call the Bapis. But these RFC destination Values changes for DEV, QA and PRD systems. when we transport these we need to change as per the Enviromment.
For that I want to define a Table to maintain the RFC destinations.How do I proceed. what should be the table structure ?
Kindly provide your valueable Inputs
Thanks &Regards,
Varun

I have defined the code as below, table is not required
if sy-sysid = 'XXX' .
sender = 'XXXXXX'.
endif.
if sy-sysid = 'YYY' .
sender = 'YYYYYY'.
endif.
if sy-sysid = 'ZZZ' .
sender = 'ZZZZZ'.
endif.

Custom Table for RFC destinations

Hi,
I am working on SAP PI/XI. I had created an Custom Function Module (RFC Wrapper) in XI or PI which calls Bapi's in SAP R/3.
So we specify the RFC Destinations in the code to call the Bapis. But these RFC destination Values changes for DEV, QA and PRD systems. when we transport, these Values we need to change as per the Enviromment(DEV,QA,PRD).
I want to Maintain the the RFC destinations Values dynamically.
For that I want to define a Table to maintain the RFC destinations. There could be "n" of RFC destinations to R/3. I want to differentiate RfC destinations pertained only to my scenario or Interface.
How do I proceed. what should be the table structure and fields?
Kindly provide your valueable Inputs
Thanks &Regards,
Varun

Hey
You should be able to handle this by reading the System Id of the current system
Just have a If-Else condition in your FM.
If SY-SYSID ="Dev"
then call Dev RFC dest
If SY-SYSID="Qa"
then call QA RFC dest
etc etc
Thanks
Aamir

Scaling your Mapped BW RFC destination to the APS DF Service

Similar Messages

Maybe you are looking for