SCAN configuration with 11g without DNS.
Hi,
We need DNS for SCAN IP configuration on 11g installation/upgradation. If we are having DNS we can use DNS name and install Grid Cluster.
Without DNS we can overcome SCAN configuration by using any one ip updation with SCAN on etc/host entry.
Please Clarify :
1) Updating the IP on etc/host entry, should be Public/private/vip sequance ?
2) After configuring SCAN without DNS, what are all exact steps need to do on Windows 2003 server? (by using srvctl modify command)
3) We are having mirror on OS level, currently using External redundancy on ASM with 10g. If we need same setup on 11g, can we create single shared disk on storage? (OCR & VOTING disk will create within ASM)
Regards,
Raja..
Hi,
user12159566 wrote:
1) Updating the IP on etc/host entry, should be Public/private/vip sequance ?Order in /etc/host is of no importance, as long as each entry has its own. Note you will only be able to use 1 IP for the SCAN.
BTW. in 11.2. there is no need to specify a private hostname or entry in /etc/host, since the "subnet" and network card(s) is/are used for identification
2) After configuring SCAN without DNS, what are all exact steps need to do on Windows 2003 server? (by using srvctl modify command)After you created the SCAN entry in DNS and removed the /etc/host entry (with the SCAN), you can simply do a "srvctl modify scan_listener". This should update the info and create the additional 2 VIPs and SCAN Listeners.
3) We are having mirror on OS level, currently using External redundancy on ASM with 10g. If we need same setup on 11g, can we create single shared disk on storage? (OCR & VOTING disk will create within ASM)While you could also use only one disk with external redundancy diskgroup for all (will work), I recommend using at least 4 disks for the diskgroup. There is a slight performance increase when having 4 disks/luns in a diskgroup instead of one, even if from the same storage. Has to do with I/O queses in the OS. Furthermore extending ASM is easier, since Oracle recommends to have luns with the same size in a diskgroup. So you just have to add a small lun if you run out of space, than to provision a big new one.
However you may stay with one disk/lun.
Regards
Sebastian
Similar Messages
-
Configure Apps for SharePoint 2013 in dev environment without DNS
I have a SP 2013 dev env
http://spitlab/ .I want to configure app store in this environment
will I be able to do it without access to a DNS server
I followed the below two articles
http://www.ashokraja.me/post/Develop-SharePoint-2013-Napa-App-In-Local-Dev-Environment-Configuring-On-Premises-without-DNS.aspx
I am able to install third party apps but when I click on it . it gets redirected to sfs.in
next i try this
http://sharepointconnoisseur.blogspot.com/2013/07/shortcut-to-prepare-sharepoint-2013-app.html
same thing I am able to install 3rd party apps but when i click on it .. it goes to intranet.com
so is it possible to install third party apps on a dev box without DNS and check out third party apps and if what steps am i missing ?Hi,
If you click the 3rd party apps and it is redirected to sfs.in or intranet.com, this means you configured app domain correctly.
You can read the official document per the following first link to understand what app domain is (with DNS configured), app domain format is as bellow image (borrowed from this
article), and app domain is defined as you want(e.g. ContosoApps.com).
Without DNS, as your above two articles described, the app domain (e.g. apps.com, or apps.sfs.in) is written manually in hosts file directly, you can construct an app domain as your own, then after you install a custom developed app, it should be the following
app url format.
http://technet.microsoft.com/en-us/library/fp161236(v=office.15).aspx
http://www.ashokraja.me/post/Develop-SharePoint-2013-Napa-App-In-Local-Dev-Environment-Configuring-On-Premises-without-DNS.aspx
http://sharepointconnoisseur.blogspot.jp/2013/07/shortcut-to-prepare-sharepoint-2013-app.html
Thanks
Daniel Yang
TechNet Community Support -
I like it that I can save webpages with or without dependencies in a separated folder. And its implementation in Firefox (e.g. it remembers how I saved something before, and that way becomes the default) can also be good sometimes. But usually it is not.
Usually I want to save pages as HTML-only. Sometimes, but only sometimes I have to save a page as a whole (I don't know the name of the feature). But after I save something with dependencies, I often forget that, and don't care about this option. Firefox, however, doesn't forget it, and saves thousands of unimportant images, until I notice it and switch it off again.
This is not good.
I tried Google Chrome, which simply don't remember how I saves something before, and always select the complete page option for default. It is exactly the opposite of the perfect solution (in my opinion). The best would be if the browser would save everything as HTML only, if I don't change it. Or it would be even better if I could configure it manually (turn this remembering feature on/off).
This is not a beginner's problem, so it would be good if only a config option solved this. I imagine that already exists a config option for this, but I could not find it. I found only the "browser.download.save_converter_index" option, which depends on how I used it last time.
Is there a config option for this? Or should I report this in the Firefox brainstorm page?
Thank you for your time
D. J. S.That choice is remembered in the Integer pref <b>browser.download.save_converter_index</b>
0: Web Page, complete (default)
1: Web Page, HTML only
2: Text files
If you want to reset that choice to HTML only on every start of Firefox then you can use this line in the file [http://kb.mozillazine.org/user.js_file user.js]
<pre><nowiki>user_pref("browser.download.save_converter_index", 1);
</nowiki></pre>
See also http://kb.mozillazine.org/Editing_configuration#How_to_edit_configuration_files -
BPM 11g install and configuration with Webcenter
Hi,
I am new to this BPM so need some help in installation. Where can I download the latest version of BPM 11g and for installating it what steps do I need to follow. Also I need to integrate Webcenter also so for webcenter integration what do I need to install and configure with BPM 11g.
Do I need to install webcenter full suite for integration with BPM and if so can I install both BPM and webcenter in one home iteself. Where can I find some documentation arround installing BPM and configuring with Webcenter.
ThanksHi,
Need some info on the install I have to install both SOA BPM 11g 11.1.1.3 and Webcenter 11.1.1.3 on the same box. I have installed the SOA BPM 11.1.1.3 but wanted to find out what is the best option of installing Webcenter 11.1.1.3 as I need to integrat SOA BPM 11g 11.1.1.3 and Webcenter 11.1.1.3. Here is what I think are the options but don't know which one should I go for or is there any other option but the fact is I need to install both on the same box.
*1. Should I install Webcenter in a separate HOME in doing so I will end up installing weblogic again and then install webcenter. Will endup having two ORACLE HOMES one for SOA BPM and one for Webcenter.*
*2. OR should I install Webcenter in the same home as SOA BPM and create a new domain in doing so what happens to some of the components that are installed when installing SOA BPM.*
*3. OR should I just extend the SOA BPM Domain and have both SOA BPM and Webcenter installed in the same domain. I believe this will only add the webcenter components but don't know if there are any issues.*
And help is really appreciated..
Thanks -
How to configure dbconsole on R12.1 with 11g database on RHEL AS 5(64-bit)
Hi Dear
I want to configure dbcosnole on R12.1 with 11g database. When i start it by executing the command emctl start dbconsole it does not start. It shows the following error:
OC4J Configuration issue. /u01/oracle/PROD/db/tech_st/11.1.0/oc4j/j2ee/OC4J_DBConsole_dg.orientpower.com.pk_PROD not found.
I will highly appreciate, if anybody could help me to resolve this issue.
Thnx
JabbarYou might want to checkout
http://download.oracle.com/docs/cd/E11882_01/install.112/e10813/dbcacrea.htm#sthref287
Oracle® Real Application Clusters Installation Guide
11g Release 2 (11.2) for Linux and UNIX -
After new weblogic domain configuration with oim 11g, not able to login
After new weblogic domain configuration with oim 11g, not able to login for the frist time as xelsysadm.
it says invalid sign in. and in logs it says password is invalid.
Please help me in asap...Thanks Pallavi for the effort. I tried commenting out, its still the same. It do not throw exception this time. However, It tells me that the recon event is completed and linked to user. When I go to user's profile, I dont see the resource provisioned.
Also,
The Account ID in recon manager of Web Console and the Account ID that is stored in the tables, doesn't match.
I wrote a custom code to fetch account and user details and here is the output,
User Key : 13 -- has Login Id : USER_CS
Account with account key : 49 is with user key : [USER_CS]
Getting Account Data......
{UD_TEST_1P_EMPLOYEENUMBER=1567, UD_TEST_1P_NAME=Kim1}
However the Account Id in recon manager is : 91
This seems fine.
Doesn't this mean, the account is reconciled successfully?
The problem is that, I am not able to see this resource in User's resource profile.
Edited by: Shashi kiran on Apr 18, 2013 3:56 PM -
Hi all,
as i'm new in RAC 11g using grid infrastructure, i was installation one RAC database server but i have a problem of connecting to my RAC database from client i got the error below but the tnsping is working fine:
ORA-12560: TNS : erreur d'adaptateur de protocole
I'm using scan configuration in GNS and when i check some document i found first a problem of my the scan configuration in /etc/hosts. I was using only one IP address for my scan server but in a document it should be 3 IP address configured for one host name. here below my /etc/hosts content:
## Public Node names
10.20.137.4 Etopup-srv01 Etopup-srv01
10.20.137.5 Etopup-srv02 Etopup-srv02
## Private Network (Interconnect)
10.20.137.129 Etopup-srv01-prv Etopup-srv01-prv
10.20.137.130 Etopup-srv02-prv Etopup-srv02-prv
## Public Virtual IPs (VIP) addresses
10.20.137.6 Etopup-srv01-vip Etopup-srv01-vip
10.20.137.7 Etopup-srv02-vip Etopup-srv02-vip
# SCAN
10.20.137.8 Etopup-scan Etopup-scan
Trying to solve the problem i was adding 2 new lines for my scan as below and restart the server:
# SCAN
10.20.137.8 Etopup-scan Etopup-scan
10.20.137.9 Etopup-scan Etopup-scan
10.20.137.10 Etopup-scan Etopup-scan
Everything seems running well but the problem of connecting from client is not yet solved and another problem apears when i check the Listener in the second node i got the below output:
[oracle@Etopup-srv02 ~]$ srvctl status scan_listener
Le processus d'écoute SCAN LISTENER_SCAN1 est activé
Le processus d'écoute SCAN LISTENER_SCAN1 est en cours d'exécution sur le noeud etopup-srv01
Would you please help me in how can i add the 2 new scan address IP or should i do a reinstall if it's not possible.
Thank you.>
<snip>
I'm using scan configuration in GNS and when i check some document i found first a problem of my the scan configuration in /etc/hosts. I was using only one IP address for my scan server but in a document it should be 3 IP address configured for one host name. here below my /etc/hosts content:
## Public Node names
10.20.137.4 Etopup-srv01 Etopup-srv01
10.20.137.5 Etopup-srv02 Etopup-srv02
## Private Network (Interconnect)
10.20.137.129 Etopup-srv01-prv Etopup-srv01-prv
10.20.137.130 Etopup-srv02-prv Etopup-srv02-prv
## Public Virtual IPs (VIP) addresses
10.20.137.6 Etopup-srv01-vip Etopup-srv01-vip
10.20.137.7 Etopup-srv02-vip Etopup-srv02-vip
# SCAN
10.20.137.8 Etopup-scan Etopup-scan
Trying to solve the problem i was adding 2 new lines for my scan as below and restart the server:
# SCAN
10.20.137.8 Etopup-scan Etopup-scan
10.20.137.9 Etopup-scan Etopup-scan
10.20.137.10 Etopup-scan Etopup-scan
<snip>
Thank you.I see three issues: first, if you are using GNS you should not statically register any VIPs in DNS or hosts files. The VIPs will be assigned by your DHCP server. Second, you cannot register one name to multiple addresses in a hosts file. The RFC describing name resolution is clear on this. Thirs, you do not appear to be using any domain names. You must use domain names with GNS: it requires a delegated sub-domain within which to function.
So, remove all your static VIPs and add domains to the fixed addresses, and then try again.
John Watson
Oracle Certified Master DBA
http://skillbuilders.com -
OS X 10.4.11 Server - configured name and reverse DNS do not match / DNS
Hi all,
I have looked for similar posts but all seem to have different scenarios, hoping to get an answer from someone more experienced than myself before I do anything silly.
Help much appreciated!
Scenario:
We run a 10.4.11 OS X Server on an XServe, hosted at an ISP. ISP provides all DNS services, incl. the reversed DNS entry.
I am currently only running the following services (based on the display in ServerAdmin):
AFP
Firewall
iChat
Mail
QuickTimeStreaming
Web
All others (incl. DNS) are grayed out. (As ISP instructed us not to add a DNS service on our box, that's "normal" according to my experiences with dedicated /co-location server hosting).
We never used changeip after the initial setup, meaning the server's
Current Hostname = somename.local and
DNS Hostname = mail.ourdomainname.net
So in system.log I find this re-occuring entry:
Jul 8 11:41:22 somename servermgrd: servermgr_dns: configured name and reverse DNS name do not match (somename.local != mail.ourdomainname.net), various services may not function properly - use changeip to repair and/or correct DNS
Finally, my question:
As Mail and Web services etc. are currently running OK from what I can tell,
1) do I HAVE to change this at all?
2) Would it be much better / why?
3) Could I change this using the following command
(111.11.111.1 indicating the server's IP address)
changeip 111.11.111.1 111.11.111.1 somename.local mail.ourdomainname.net
4) without running a DNS server on the machine, i.e. DNS service is not required for this to work?
5) obviously I want to be able to use Server Admin after I issue this command...
6) can I fall back easily in case this would screw it up, or is there no risk whatsoever doing this in my case?
THANK YOU so much for any help!Hi Jonas
If port 443 is already being used on the same box as KMS then it will complain and probably not start the service? I've seen this with LDAP port 636. This is when Kerio is installed on a server configured as an OD Master. Clearly the port can't be used by both servers.
It might be easier to change the port your sites are currently using to something else? Although don't do anything yet. Pose the question to Kerio Support and see what advice they offer.
Yes moving the mail to a local folder on the mail client will do it.
Is Kerio going on the same box? If its a different box (presumably different IP address?) Then what you can do is to port forward to the new server's IP address instead of disabling it. This way while you are bringing the new server on line users can still send mail right up until the time you give instructions on changing their inbound/outbound mail server details. Of course they won't be able to receive but if you time it right they may not even get an error message? Depends on what their schedules are.
If it was me I would choose IMAP every time. As the mail admin you have full control and a central location for easy backup. KMS has a built in archiving feature that makes this a simple process. This is an easier option than going round individual client machines and making sure mail held locally in POP accounts are backed up. Besides there is always someone who falls through the loop and I'm not taking into account drive failures. It makes good sense anyway as there is talk of legislation being introduced to make this a requirement for businesses who run their own mail servers. This is certainly true for certain parts of the US and what usually happens there is generally taken up in the UK and most parts of Europe.
Kerio's WebMail Client means users don't even have to have their own computer. Just as long as they have access to one that has access to the internet they can send/receive mail. No need for dedicated mail applications such as Apple Mail, Thunderbird, Entourage etc. How mail is uses remains consistent for all users.
Yes. I did this not so long ago with Leopard's built in Mail Server. I sent an e-mail defining a time when no inbound mail would be received. Disabled port forwarding for SMTP port 25 and approx 30 minutes after that another mail stating no outbound mail should be sent. Once everything was swopped over (we were changing from a G4 10.4 server to a G5 10.5 Server) port 25 was enabled, new server brought online and everyone was mailing again with no appreciable downtime.
These boxes were to have the same IP address hence the slightly different approach.
Does this help?
Tony -
Sql Exception on Testing Configuration with SQL Server JDBC driver for XA
I have a requirement of analyzing the behavior of SQL Server JDBC data sources for XA transactions in our application.We have been using Non-XA drivers for both Oracle and SQL Server as we had no requirement for transactions spanning across multiple databases in past.I have setup and tested the XA driver for Oracle (Oracle Driver (Thin XA) for Instance Connections 9.0.1,9.2.0,10,11) in Weblogic 11g and its working perfectly for transactions spanning across two databases.No when I am trying to configure weblogic 11g R1 for Sql server JDBC driver to support XA transactions with driver details as follows,
Server:Weblogic 11g R1
Driver Type: MS Sql Server
Database Driver :Oracle's MS SQL Server Driver(Type 4 XA) Version:7.0,2000,2005)
Database:SQL Server 2005(Single Instance)
and try to create a new data source and select "Test Configuration" and following error is thrown ,
<Mar 17, 2011 4:49:49 PM GMT+05:30> <Error> <Console> <BEA-240003> <Console encountered the following error java.sql.SQLException: [OWLS][SQLServer JDBC Driver][SQLServer]xa_open (0) returns -3
at weblogic.jdbc.sqlserverbase.BaseExceptions40.createAppropriateSQLExceptionInstance(Unknown Source)
at weblogic.jdbc.sqlserverbase.BaseExceptions40.createSQLException(Unknown Source)
at weblogic.jdbc.sqlserverbase.BaseExceptions.createException(Unknown Source)
at weblogic.jdbc.sqlserverbase.BaseExceptions.getException(Unknown Source)
at weblogic.jdbc.sqlserver.tds.TDSRequest.processErrorToken(Unknown Source)
at weblogic.jdbc.sqlserver.tds.TDSRequest.processReplyToken(Unknown Source)
at weblogic.jdbc.sqlserver.tds.TDSRPCRequest.processReplyToken(Unknown Source)
at weblogic.jdbc.sqlserver.tds.TDSRequest.processReply(Unknown Source)
at weblogic.jdbc.sqlserver.SQLServerImplStatement.getNextResultType(Unknown Source)
at weblogic.jdbc.sqlserverbase.BaseStatement.commonTransitionToState(Unknown Source)
at weblogic.jdbc.sqlserverbase.BaseStatement.postImplExecute(Unknown Source)
at weblogic.jdbc.sqlserverbase.BasePreparedStatement.postImplExecute(Unknown Source)
at weblogic.jdbc.sqlserverbase.BaseStatement.commonExecute(Unknown Source)
at weblogic.jdbc.sqlserverbase.BaseStatement.executeUpdateInternal(Unknown Source)
at weblogic.jdbc.sqlserverbase.BasePreparedStatement.executeUpdate(Unknown Source)
at weblogic.jdbcx.sqlserver.SQLServerImplXAResource.executeXaRpc(Unknown Source)
at weblogic.jdbcx.sqlserver.SQLServerImplXAResource.executeXaRpc(Unknown Source)
at weblogic.jdbcx.sqlserver.SQLServerImplXAResource.open(Unknown Source)
at weblogic.jdbcx.sqlserverbase.BaseXAConnection.init(Unknown Source)
at weblogic.jdbcx.sqlserverbase.BaseXAConnection40.init(Unknown Source)
at weblogic.jdbc.sqlserverbase.BaseClassCreatorForJDBC40.createXaConnection(Unknown Source)
at weblogic.jdbcx.sqlserverbase.BaseXADataSource.getXAConnection(Unknown Source)
at com.bea.console.utils.jdbc.JDBCUtils.testConnection(JDBCUtils.java:550)
at com.bea.console.actions.jdbc.datasources.createjdbcdatasource.CreateJDBCDataSource.testConnectionConfiguration(CreateJDBCDataSource.java:450)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.beehive.netui.pageflow.FlowController.invokeActionMethod(FlowController.java:870)
at org.apache.beehive.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:809)
at org.apache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:478)
at org.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java:306)
at org.apache.beehive.netui.pageflow.FlowController.execute(FlowController.java:336)
at org.apache.beehive.netui.pageflow.internal.FlowControllerAction.execute(FlowControllerAction.java:52)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.access$201(PageFlowRequestProcessor.java:97)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor$ActionRunner.execute(PageFlowRequestProcessor.java:2044)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors$WrapActionInterceptorChain.continueChain(ActionInterceptors.java:64)
at org.apache.beehive.netui.pageflow.interceptor.action.ActionInterceptor.wrapAction(ActionInterceptor.java:184)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors$WrapActionInterceptorChain.invoke(ActionInterceptors.java:50)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors$WrapActionInterceptorChain.continueChain(ActionInterceptors.java:58)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors.wrapAction(ActionInterceptors.java:87)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processActionPerform(PageFlowRequestProcessor.java:2116)
at com.bea.console.internal.ConsolePageFlowRequestProcessor.processActionPerform(ConsolePageFlowRequestProcessor.java:261)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)
at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)
at com.bea.console.internal.ConsoleActionServlet.process(ConsoleActionServlet.java:256)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
at com.bea.console.internal.ConsoleActionServlet.doGet(ConsoleActionServlet.java:133)
at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1199)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:686)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.processActionInternal(ScopedContentCommonSupport.java:142)
at com.bea.portlet.adapter.scopedcontent.PageFlowStubImpl.processAction(PageFlowStubImpl.java:106)
at com.bea.portlet.adapter.NetuiActionHandler.raiseScopedAction(NetuiActionHandler.java:111)
at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:181)
at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:167)
at com.bea.netuix.servlets.controls.content.NetuiContent.handlePostbackData(NetuiContent.java:225)
at com.bea.netuix.nf.ControlLifecycle$2.visit(ControlLifecycle.java:180)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:324)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:130)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:352)
at com.bea.netuix.nf.Lifecycle.runInbound(Lifecycle.java:184)
at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:159)
at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:388)
at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:258)
at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:199)
at com.bea.netuix.servlets.manager.SingleFileServlet.service(SingleFileServlet.java:251)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.bea.console.utils.MBeanUtilsInitSingleFileServlet.service(MBeanUtilsInitSingleFileServlet.java:47)
at weblogic.servlet.AsyncInitServlet.service(AsyncInitServlet.java:130)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
I followed the instruction in weblogic jdbc drivers guide to configure the JTA Transactions to support XA on SQL Server machine and weblogic server which included,
1.Copying sqljdbc.dll copied to SQL_Server_Root/bin directory from WL_HOME\server\lib.
2.Copied instjdbc.sql to sql server machine and executed the script with following output,
Changed database context to 'master'.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_open', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_open2', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_close', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_close2', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_start', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_start2', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_end', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_end2', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_prepare', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_prepare2', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_commit', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_commit2', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_rollback', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_rollback2', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_forget', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_forget2', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_recover', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_recover2', because it does not exist or you do not have permission.
creating JDBC XA procedures
instxa.sql completed successfully.
3.Verified that MSDTC service is running on both SQL Server and weblogic machines with XA Transaction enabled and DTC option enabled for both inbound and outbound connections.
4.Copied sqljdbc.jar (version 3.0 downloaded from msdn portal) to "C:\Oracle\Middleware\wlserver_10.3\server\ext\jdbc\sqlserver" directory and updated weblogic_classpth variable in commEnv.cmd file.
set WEBLOGIC_CLASSPATH=%JAVA_HOME%\lib\tools.jar;%BEA_HOME%\utils\config\10.3\config-launch.jar;%WL_HOME%\server\lib\weblogic_sp.jar;%WL_HOME%\server\lib\weblogic.jar;%FEATURES_DIR%\weblogic.server.modules_10.3.2.0.jar;%WL_HOME%\server\lib\webservices.jar;%ANT_HOME%/lib/ant-all.jar;%ANT_CONTRIB%/lib/ant-contrib.jar;C:\Oracle\Middleware\wlserver_10.3\server\ext\jdbc\sqlserver\server\ext\jdbc\sqlserver\sqljdbc.jar
Can some one please provide some input on whats causing this and any other steps needs to be followed to implement XA support using SQL Server JDBC driver.You seem to have done everything correctly and diligently. I would ask that you open
an official support case. -
How to create a new Oracle OSB project automaticaly with script without IDE
Hello,
I want to create automatically an "Oracle service bus project" and an "Oracle service bus configuration project" with scripts (ANT or Maven or ...) without using IDE, without using workshop or Eclipse. I want to create automatically (ANT or Maven) just a skeleton of an OSB project witch i can use after in workshop.
I want to create 1 "Oracle service bus configuration project" with many "Oracle service bus project" automatically (ANT or Maven or scripts) witch i can use after in workshop. How to create a new Oracle OSB project automaticaly with script without IDE ? How can i do this ?
I'm using Oracle service bus 10.3.1
Thank you for your help.Thank you for your response,
I do not want to just create the services (proxy services and business services) but I want to create a template for 40 OSB project with the same scripts ANT/Maven.
Template="Oracle service bus configuration project" + "Oracle service bus project" + services of 40 OSB projects
The goal is that I have more than 40 projects to create and just the name of the projects that changes (when I say the name of the project ie the name of the OSB project, the name of proxy services and the name of business services ).
So I want to give my script (ANT/Maven) the name of 40 OSB project and the script must generate the skeleton of the 40 projects at once time and after generation of skeleton of the 40 project, I will import them in the workshop to add manually mapping and routing and other things that differs from one project to another.
So i want to generate automatically a skeletons of 40 OSB projects using a script (ANT / Maven) and I give to the script juste the names of the 40 projects.
I want to create a "Oracle service bus configuration project" and "Oracle service bus project" automatically of 40 OSB projects (ANT or Maven or scripts) witch i can use after in workshop.
I want to create one 'template' of all 40 projects in the same time, with the same directory structure (Transforlation, Business services, proxy services, WSDL .....) and all 40 project have the same transport, just the names of projects and services witch changes and i can give to the script all names of projects and services and i can give also all WSDL.
Regards,
Tarik -
Error while configuring Oracle 11g Forms/Reports Product during istallation
Dears,
We are trying to configuring Oracle 11g Forms / Reports during istallation.
OS using: Win 7 -- 32 bit
RAM: 4 GB
We have installed the following modules successfully.
Following are the steps which we have followed:
1. Installation of Oracle jdk's --> Successful
2. Installation of Oracle web Logic Product --> Successful
3. Installation of Oracle Forms & reports Products ---> Successful
4. Configuration of Oracle 11g Forms / Reports Products --> Failed
After performing step 4, we are getting an error in the .out file
Can anyone please let us know what we have to do for making the step 4 successful.
Following is the content present in the "install2012-08-30_04-43-55PM.out" file..
Setting ORACLE_HOME to C:\Oracle\Middleware\frs11.1.2
Setting Doracle.config.mode to true
Adding C:\Users\id821839\AppData\Local\Temp\OraInstall2012-08-30_04-43-55PM for deletion.
Adding to classpath:file:/C:/Users/id821839/AppData/Local/Temp/OraInstall2012-08-30_04-43-55PM/ext/jlib/classic.jar
Adding to classpath:file:/C:/Users/id821839/AppData/Local/Temp/OraInstall2012-08-30_04-43-55PM/ext/jlib/template.jar
[email protected]lassicPage.ScreenRes
configFileName:C:\Users\id821839\AppData\Local\Temp\OraInstall2012-08-30_04-43-55PM\ext\jlib\footprint.xml
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
Reading response file..
Parse Warning at line number:15
MYORACLESUPPORT_USERNAME=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:27
PROXY_HOST=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:30
PROXY_PORT=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:33
PROXY_USER=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:39
COLLECTOR_SUPPORTHUB_URL=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:75
DOMAIN_PORT=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:90
STATICPORT INI FILE LOCATION=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:99
PROXY HOST NAME=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:102
PROXY PORT NO=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:105
PROXY BY PASS ADDRESS=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Validations are enabled for this session.
Verifying data......
In processErrorMsgStringOracle Instance
needWritableDirectory: false
needWritableDirectory: true
middlewareHomeLocation:C:\Oracle\Middleware
weblogicHomeLocation:C:\Oracle\Middleware\wlserver_10.3
weblogicHome:C:\Oracle\Middleware\wlserver_10.3
weblogicHomeLocation:C:\Oracle\Middleware\wlserver_10.3
In processErrorMsgStringInstance Name
In processErrorMsgStringunknown
In processErrorMsgStringOracle Home
In processErrorMsgStringDomain Name
In processErrorMsgStringunknown
In processErrorMsgStringAdministrator Password
In processErrorMsgStringunknown
In processErrorMsgStringAdministrator User Name
In processErrorMsgStringunknown
configuration Failed. Exiting configuration due to data validation failure.+
outputFile:C:\Program Files\Oracle\Inventory\logs\installProfile2012-08-30_04-43-55PM.log
in writeProfile method..
+[ENGINE] Adding C:\Users\id821839\AppData\Local\Temp\OraInstall2012-08-30_04-43-55PM for deletion.+
Thanks in advance..
Suhail
Edited by: 956027 on 30-Aug-2012 23:13
Edited by: 956027 on 30-Aug-2012 23:14Following is the last part of thecontent in .log file
This is the only part wher I have found the term "error"
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Fetching the value of domainName+
+[2012-08-31T08:46:03.570+02:00] [as] [TRACE] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] [SRC_CLASS: oracle.as.install.common.handlers.weblogicQueries.IsValidDomainHome] [SRC_METHOD: executeHandler] domainName: frsDomain+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Fetching the value of wlHome+
+[2012-08-31T08:46:03.570+02:00] [as] [TRACE] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] [SRC_CLASS: oracle.as.install.common.handlers.weblogicQueries.IsValidDomainHome] [SRC_METHOD: executeHandler] wlHome: C:\Oracle\Middleware\user_projects\domains+
+[2012-08-31T08:46:03.570+02:00] [as] [TRACE] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] [SRC_CLASS: oracle.as.install.common.handlers.weblogicQueries.IsValidDomainHome] [SRC_METHOD: executeHandler] mwHome: C:\Oracle\Middleware+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] errID ====>>>>:INST-07277+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Error:Error in validating Domain name+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Cause:Specified Domain name is either not valid or the domain location already has a domain with the same name.+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Action:Enter a valid Domain name+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Exiting method executeHandler+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Handler launch end: weblogicQueries.isValidDomainHome+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Handler returned status: FAILED+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Error in validating Domain name+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Setting valueOf(DOMAIN_NAME) to:frsDomain. Value obtained from:USER+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Setting valueOf(DOMAIN_NAME) to:frsDomain. Value obtained from:USER+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Setting valueOf(INVALID_TEXT_CHAR_MSG_STRING) to:unknown. Value obtained from:USER+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Setting valueOf(INVALID_TEXT_CHAR_MSG_STRING) to:unknown. Value obtained from:USER+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Inputs passed to the handler: [ FIELD DOMAIN NAME ( field ) = "Domain Name" ], [ DOMAIN_NAME ( val ) = "frsDomain" ], [ INVALID_TEXT_CHAR_MSG_STRING ( invalidCharMsgString ) = "unknown" ], [ Valid Character List for Farm Name ( regEx ) = "[\p{Alnum}_-]+" ]+
+[2012-08-31T08:46:03.570+02:00] [as] [TRACE] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] [SRC_CLASS: oracle.as.install.engine.modules.handler.engine.HandlerLauncher$LaunchHelper] [SRC_METHOD: launch] Handler class: class oracle.as.install.common.handlers.txtQueries.CheckTxtFieldUsingRegEx+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Handler launch begin: txtQueries.checkTxtFieldUsingRegEX+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Entering method executeHandler+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Fetching the value of isCanBeBlank+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Fetching the value of val+
+[2012-08-31T08:46:03.570+02:00] [as] [TRACE] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] [SRC_CLASS: oracle.as.install.common.handlers.txtQueries.CheckTxtFieldUsingRegEx] [SRC_METHOD: executeHandler] Value to be tested: frsDomain+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Fetching the value of field+
+[2012-08-31T08:46:03.570+02:00] [as] [TRACE] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] [SRC_CLASS: oracle.as.install.common.handlers.txtQueries.CheckTxtFieldUsingRegEx] [SRC_METHOD: executeHandler] Text Field name: Domain Name+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Fetching the value of regEx+
+[2012-08-31T08:46:03.570+02:00] [as] [TRACE] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] [SRC_CLASS: oracle.as.install.common.handlers.txtQueries.CheckTxtFieldUsingRegEx] [SRC_METHOD: executeHandler] Regular Expression: [\p{Alnum}_-]++
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Fetching the value of minlength+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Fetching the value of maxlength+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Fetching the value of invalidCharMsgString+
+[2012-08-31T08:46:03.570+02:00] [as] [TRACE] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] [SRC_CLASS: oracle.as.install.common.handlers.txtQueries.CheckTxtFieldUsingRegEx] [SRC_METHOD: executeHandler] Invalid Char Msg String: unknown+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Checking the value for minimum length+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Checking the value for maximum length+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Checking the value for invalid characters+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Exiting method executeHandler+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Handler launch end: txtQueries.checkTxtFieldUsingRegEX+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Handler returned status: SUCCESS+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Setting valueOf(ADMIN_PASSWORD) to:<SECURE>. Value obtained from:USER+ -
Hi All,
I am facing the below error while installing Oracle RAC in Silent Mode.
SEVERE: There are no common subnets represented by network interfaces across all cluster nodes.
SEVERE: [FATAL] [INS-40925] One or more nodes have interfaces not configured with a subnet that is common across all cluster nodes.
CAUSE: Not all nodes have network interfaces that are configured on subnets that are common to all nodes in the cluster.
ACTION: Ensure all cluster nodes have a public interface defined with the same subnet accessible by all nodes in the cluster.
My /etc/hosts is given below.
127.0.0.1 localhost localhost.localdomain
#Public
192.168.1.101 rac1 rac1.localdomain
192.168.1.102 rac2 rac2.localdomain
#Private
192.168.2.101 rac1-priv rac1-priv.localdomain
192.168.2.102 rac2-priv rac2-priv.localdomain
#Virtual
192.168.1.103 rac1-vip rac1-vip.localdomain
192.168.1.104 rac2-vip rac2-vip.localdomain
#SCAN
192.168.1.105 rac-scan rac-scan.localdomain
Could you please help me to get rid of the error INS-40925....Any Idea...???Hi Ramesh,
Please find the result of ifconfig -a from both nodes RAC1 & RAC2.
ifconfig -a in RAC1
[oracle@rac1 Desktop]$ ifconfig -a
eth0 Link encap:Ethernet HWaddr 08:00:27:17:7A:D5
inet addr:192.168.1.101 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fe17:7ad5/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:102 errors:0 dropped:0 overruns:0 frame:0
TX packets:48 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:25472 (24.8 KiB) TX bytes:3322 (3.2 KiB)
Interrupt:19 Base address:0xd020
eth1 Link encap:Ethernet HWaddr 08:00:27:C0:AC:DB
inet addr:192.168.2.101 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fec0:acdb/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:240 (240.0 b) TX bytes:816 (816.0 b)
Interrupt:16 Base address:0xd240
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:56 errors:0 dropped:0 overruns:0 frame:0
TX packets:56 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:6394 (6.2 KiB) TX bytes:6394 (6.2 KiB)
virbr0 Link encap:Ethernet HWaddr 52:54:00:CC:BD:FB
inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
virbr0-nic Link encap:Ethernet HWaddr 52:54:00:CC:BD:FB
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:500
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
ifconfig -a in RAC2
[oracle@rac2 Desktop]$ ifconfig -a
eth0 Link encap:Ethernet HWaddr 08:00:27:C9:38:82
inet addr:192.168.1.102 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fec9:3882/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:122 errors:0 dropped:0 overruns:0 frame:0
TX packets:59 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:32617 (31.8 KiB) TX bytes:5157 (5.0 KiB)
Interrupt:19 Base address:0xd020
eth1 Link encap:Ethernet HWaddr 08:00:27:90:B5:A0
inet addr:192.168.2.102 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fe90:b5a0/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:11 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:240 (240.0 b) TX bytes:746 (746.0 b)
Interrupt:16 Base address:0xd240
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:56 errors:0 dropped:0 overruns:0 frame:0
TX packets:56 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:6390 (6.2 KiB) TX bytes:6390 (6.2 KiB)
virbr0 Link encap:Ethernet HWaddr 52:54:00:CC:BD:FB
inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
virbr0-nic Link encap:Ethernet HWaddr 52:54:00:CC:BD:FB
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:500
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) -
Steps to configure Toplink 11g(11.1.1.0.1) on OC4J 10.
Please inform detailed steps to configure Toplink 11g(11.1.1.0.1) on OC4J 10.1.3.4
Prashant,
Hi, Also, Try one of the following 2 configuration options for eclipselink.jar on OC4J
http://wiki.eclipse.org/EclipseLink/Examples/JPA/OC4J_Web_Tutorial#Option_1:_Add_an_eclipselink_shared-library_to_OC4J_-_recommended
http://wiki.eclipse.org/EclipseLink/Examples/JPA/OC4J_Web_Tutorial#Option_2:_Add_a_versioned_new_EclipseLink_shared-library_module_-similarto_option_1
The applib option is not recommended without some javax and jdbc reconfiguration and associated classloader positioning.
http://wiki.eclipse.org/EclipseLink/Examples/JPA/OC4J_Web_Tutorial#Option_3:_eclipselink.jar_in_applib_-notrecommended
You may refer to the following post for more details.
Re: How to verify OC4J uses Oracle Toplink 10.x and not Toplink Essentials
thank you
/michael
http://www.eclipselink.org -
Senario:
Need to manage 500 Enterprise iPads
Requirements;
1) Trackable via Find my iOS device (we have 500 iPads and with the 100 device limit per iCloud account for Find my iOS device limit we have 5+ iCloud accounts).
2) Individually named iPads for locating and sending commands to wipe, lost mode, etc.. on map per Find my iOS device (we uniquely name them in Apple Configurator either by using the "sequensetially numbering feature", or by creating individual back ups (yes, 450) with the name specified in the image).
3) Find my iOS device feature enabled in base Prepared or Supervised image (using one of our 5+ iCloud accounts) (image can be created during prepared stage, or in supervised stage) - tried both and have the same issue - which I am getting to...
4) VPP codes for paid apps (all VPP codes purchased with generic account which is the Apple Admin account for VPP purchases). Apple Configurator is set up under a different/ unique Apple account (i.e. not VPP admin account) and not logged into iTunes for any purchases/ services).
Issue: Can not do any following senarios;
A)
1) configure master iOS 7 iPad with iCloud account with Find my iOS feature enabled in Prepare stage (added during preparing stage)
2) configure master iOS 7 iPad with iCloud account with Find my iOS feature enabled in Supervised stage (added after supervising, and then backing up that supervised and iOS Find my iOS device enabled)
B) 1) Apply master image to any Supervised iPad (under senario step A) or senario step B)), including the (Supervised or/ Prepared iPad that was used to create the maset iOS 7 image
Result = fail with Apple generic code "4" ; This is obviously due to Find my iOS device feature enabled during image capture.
According to Apple (see Apple Config. Help) the 'Activation lock' (new feature in iOS 7) will not be enabled on a supervised device when an iCloud account with "Find my iDevice" is enabled. Their "help files" seem to imply after the device is Supervised, and a person (presumably and end user) adds thier own iCloud account with Find my iOS device enabled the activation lock is not enabled and erasing/ reconfiguring with Apple Configurator will not cause reimaging probhlems such as requiring the end user's credentials to reconfigure the device using Apple Configurator (i.e. you won't need the end user's credentials).
Needed: To be able to configure Supervised iPads with iCloud account (Enterprised owned iCloud account) configured on the basse image, which has Find my iOS device enabled, and to be able to apply that base image to all Enterprise iPads without generic apple error code 4 issue.Hi all
I am trying to replicate these steps in my environment but I am having trouble getting an iCloud backup restored to a supervised device. Can someone clarify the steps? The parts I am unsure on are:
1) Do you Prepare in Configurator with all the institution owned apps? Or do you install them after restoring the iCloud backup?
2) After entering the personal AppleID to restore the iCloud backup, the setup wizard prompts for the Institution/Configurator AppleID, there is an option to 'Skip Now'. Do you enter in the password for the institution account? or do you skip that step?
3) What exactly is on the screen in the 'mini setup assistant' after the restore when you Refresh with Configurator?
Any help would be greatly appreciated! -
Scan listenser with EBS R12.1.2
Hi All
I am planning to upgrade my DB to 11R2 with EBS R12.1.2 with RAC on linux platform .
I have doubt can i use Scan listener with R12.1.2 EBS.
I am referring doc Using Oracle 11g Release 2 Real Application Clusters with Oracle E-Business Suite Release 12 [ID 823587.1]
Kindly advice me, if i can not use then is there any other method.
Thanks
KrishnaThanks for reply. The doc which i have mention in last post says that EBS R12.1.3 is supporting scan listener. but doc does not say about R12.1.2. do you have any idea that can i use this with EBS R12.1.2It is supported with 12.1.2 if you have the patches under "For Oracle E-Business Suite Release 12.1" section applied.
Thanks,
Hussein
Maybe you are looking for
-
Hi, I am experiencing an issue very similar to the one described in (http://forums.adobe.com/message/243559#243559). I have several RH projects that have started crashing/closing when I save changes. The projects are all several years old, of varying
-
Default SC Plant Company code and Storage location Based on Position
Hi All, We are on version SRM 7.02. We are using SAP ECC R/3 EHP7 based system as a back end FI and HR system. Org structure in SRM is replicated fromm HR system. We have case of concurrent employment in the HR org structure , which means one USER ca
-
Any idea about the pricing of the hardwares for Oracle 10g RAC?
Hi, If I go for 2 nodes RAC using Dell servers and Disk array, any ideas about the prices? (just for the hardwares.) Thanks. Regards, Jason
-
Hello David Powers. I was working zend e-mail on lesson 8 Dreamweaver cs5 with php. I have a problem reset password page in test website. Here is the link http://test.citidesigners.com/forget.php When I enter registered email like. [email protected
-
How can I organise my bookmarks alphabetically?
Whenever I add a new bookmark it shows at the end of the existing list. I've got dozens, and it's very inconvenient to spend time scrolling up and down to find the right one. Is it possible to have them added alphabetically?