Scan Feature on Laserjet M1120n MFP

HI, I have a Laserjet M1120n MFP and have just recently installed windows 7 on my pc which formerly had xp. After installing the full driver pack from the hp website the printer works fine except for the scan to feature which behaves irratically. I have it set to scan to pdf which is how it was set before but when i go to scan multiple pages it sometimes comes out as just the first page, sometimes 2 instead of three and sometimes has two pages but they are both the first page.
Any ideas?
Thanks.

Hi,
The Printer is not compatible with Windows Server 2008, Windows Server 2003 is the only supported server OS.
You may find its specifications listed below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01118375&tmp_task=prodinfoCategory&cc=us&dlc=en...
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

Default paper size scanning problem, LaserJet M1120n MFP

Hi, I just got a used LaserJet M1120n MFP. Installed the most up-to-date drivers form HP's website. Printing is fine over USB or LAN, however the WIA scanning driver defaults to paper size "Letter" and I can't scan A4 pages all the way. The bottom is always cut off and I get an unwanted strip besides the scanned document. Please, advise how to change the default paper size of the WIA driver to A4. I use Windows XP Pro. Looked everywhere but cannot find any settings that will allow me to change the default paper size. Any ideas?
I have been thinking, could default paper size be somehow be tied to system locale? My locale is European and all other device drivers do default to A4. I wonder how the WIA scanning driver chose to default to Letter size.
The TWAIN driver works fine (I can choose default paper size), though it is less intuitive than I expected. Too bad I can't use it over a LAN. Is there a way to calibrate the scanner for white as the background seems kind of dark?
Your suggestions and ideas are most appreciated. Thank you.

Thanks for the reply, Spencer. I have used Adobe Acrobat to scan by means of the WIA driver, but when I do so the paper size selection box is dimmed (inactive) and I can't choose any paper size (nor any is preselected). I have also used Win XP's native Scanner and Camera Wizzard; it doesn't even have a paper size setting. Then I have used it with Win 7's native Windows Fax and Scan; no paper size setting here either.
Here is a useful thread on the same issue from Adobe's forum: http://forums.adobe.com/thread/844549
Reading around the forums I came across several posts where people discussed the impossibiity to set paper size when scanning using the WIA driver. Their problem was a bit different, though. The WIA driver had locked to size 'Legal' while they needed to scan in size 'Letter'.
The WIA interface was developed by Microsoft and here is what they have to say about the issue:
http://msdn.microsoft.com/en-us/library/windows/hardware/ff548440%28v=vs.85%29.aspx
'Supported Scanner Paper Sizes
Although two WIA user interface components are able to display a list of page sizes to the user, there is no easy way for a WIA driver to know which page sizes a scanner supports.
Page Size in WIA Applications
There are no WIA properties that allow WIA drivers to report supported page sizes or that allow applications to specify page size directly. To communicate page size settings to a driver, an application must calculate the required size in dots per inch (dpi) and adjust the origin of the scan to conform with the registration requirements of the device.
Page Size in the Common Scanner Dialog and in the Scanner and Camera Wizard
Both the Common Scanner Dialog and the Scanner and Camera Wizard have a static table of supported page sizes in which each page size is described by its horizontal width and vertical height, both in increments of 0.001 inch. These page sizes are currently displayed only when the scanner is in document feeder mode.
The largest page size (by area) that a driver supports in page feed mode, as determined by the maximum bed size, is considered the default page size. Paper sizes that do not fit on the feeder or on the bed of the device are not offered to the user.' -- exactly my case!
Having tried the same WIA driver (developed by HP in this case) on several PC's running different WIndows OS and using non-US locale settings, I have came to the conclusion that HP may have hard coded the Letter paper size in the driver. I guess this works for North America but not in Europe where A4 is the standard size.
I guess I have to look into ways to get to that hard coded paper size setting in order to be able to make use of the driver. I don't even know if that will be possible but I'll keep on reading. Wish me luck

HP LaserJet M1120n MFP latest drivers for 64-bit Windows 7

I can't get my HP LaserJet M1120n MFP to work with 64-bit Windows 7. I downloaded and installed the drivers from HP site, file named ljM1120-hb-pnp-win64-el.exe and scan doesn't work, can only print Word documents. Downloaded and run check with the HP Doctor program you strongly recommend, but the ! report says I must download and install the most recent driver....well, it was what I thought was what I would get from HP site. Thanks for help!

Hi Lollo33,
The only 64 bit drivers available for your printer are the basic print and scan drivers which do not include any additional scan software. However, there is full solution driver support for Windows 7 32bit.
HP LaserJet Hostbased Print/Scan Plug and Play Drivers
Description:
The Plug and Play Bundle provides EZInstall to assist with installation for direct USB connections and offers basic print and scan for all-in-one and multifunction devices.
Details and specifications
File name:
ljM1120-hb-pnp-win64-en.exe [1/1, 14.14M]
System requirements:
No additional prerequisites
Released:
2009-10-11
Version:
20080808
Compatibility:
Microsoft Windows 7 (64-bit), Microsoft Windows XP x64, Microsoft Windows Vista (64-bit), Microsoft Windows Server 2003 64-Bit Edition
As an alternative, you may be able scan using MS Paint or the built-in Windows Fax and Scan software.
http://windows.microsoft.com/en-US/windows7/Scan-a-document-or-photo-with-Windows-Fax-and-Scan
Let me know if this helps.
Say "Thanks" by clicking the blue Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"; therefore, it's easier for others to find.
I am an HP employee.

Im using HP laserjet M1120N MFP printer and its required WIA driver.

hi,
im using HP laserjet M1120N MFP printer.
last time i dont have any issues to printer or scan, and lately i cant scan
and only able to print out.
its required me have WIA driver. anyone know how to fix its.
thanks

Hello zuzack97,
I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

HP LaserJet M1120n MFP, Win7-64bit, LAN

Hello, it is possible Hello, it is possible to print over LAN at printer HP LaserJet M1120n MFP from Windows 7 Professional 64 bit?
I tried to use HP Universal Print Driver PCL6 and PCL5. Printer was detected, but doesn't work. Document was sending from pool to printer and that was all.
On offcial support website is only driver for printing over USB.
Thanks
This question was solved.
View Solution.

Hello,
I see that you are having problems printing over the network to your printer. Could you provide more information around your network setup? For example, are the PC and the Printer connected to the same router... or the same network? Any detailed information about your network setup would be very helpful.
It looks like there is another support thread discussing the same or similar issue:
http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/HP-LaserJet-M1120n-MFP-does-not-print-i...
Thanks,
I am an HP employee.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

Cannot scan with HP LaserJet M1005 MFP

I updated to Snow Leopard 10.6.3 yesterday. Big mistake as I cannot now scan with my HP LaserJet M1005 MFP. I have been unable to find a solution here or via Google. Does anyone know if this is possible? I realize this device has never been "Mac friendly" (one might even say, not compatible.... despite HP's over-generous claims), but I would have thought there would be a new driver for SL by now.
If not, could anyone recommend a non-HP scanner (not MFP) that works well with SL?
thanks!

Hi @3Digit ,
I see that you are having issues scanning, there isn't any scanning software in the HP folder. I would like to help you out today.
Open the HP Scan window with one of the following methods:
Double-click the HP Scan icon () for your printer on the Windows desktop.
Click the Windows icon (), click All Programs, click the HP folder, click the name of your printer, and then click HP Scan.
If you are missing the HP Scan software altogether, then the full software didn't install on the computer.
If that is the case, uninstall and reinstall the printer software. Here is the link for the newest drivers. Software & Drivers.
First do these steps, before installing the software, just to make sure it fully installs.
I would disable all the start up programs and temporarily turn off the Antivirus Software and any Real Time Scanning in the Antivirus Software also, to see if that is causing the issue. How to use MSCONFIG . Click on the Startup tab and click Disable all, Then click the Services tab and check Hide All Microsoft Services.
I have provided a document for how to scan. It is for Windows 7, but the steps will also work for Windows Vista.
Scan from Windows 7 With the Full Feature HP Software for HP LaserJet Multifunction Printers
How is the printer connected? (USB/Ethernet/Wireless)
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How to enable WebScan feature in LaserJet Pro MFP M126nw Printer

I have installed a new LaserJet Pro MFP M126nw printer with wireless configured. The IP Address is 192.168.0.21. I visit http://192.168.0.21 through browser. I don't see Print/Copy/WebScan options there. I can see rest of the configuration tabs.
I am interested in WebScan feature to scan document from my Chromebook. Please let me know how to enable this.

Hi,
The Webscan feature is not available on laser printers, it is only available on Inkjet printers.
I afraid you can only print from a Chromebook, scanning to a such is not supported with the HP Laserjet Pro MFP M126 printer.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Scanning with HP LaserJet Pro MFP M127fn

Hello everyone,
I installed my printer HP LaserJet Pro MFP M127fn on a network. I am able to print from many different computers, but I can not scan. On computer where I want to install scanner I am using Ubuntu 12.04. I tried to use "Simple scan" and "Xsane", but these programs did not recognize scanner.
I would appriciate if someone can help me. Thanks in advance,
Ramiz

Hello @korda93 , and welcome to the HP Forums.
I am sorry, but to get your issue more exposure I would suggest posting it in the Ubuntu forums since this is appears to be an Ubuntu issue. You can do this at the Ubuntu Forums.
I hope this helps!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Scaner problem - HP LaserJet M1536dnf MFP

HP LaserJet M1536dnf MFP
Wire LAN connected.
There are two stations working with the same MFP.
On one - everythink works fine.
On second - not.
Drivers are the same: 61.101.98561
IP address of printer is the same.
Both on Win7.
Issue is that MFP is printing documents but it refuses to scan any. After running HP Scan application it takes few seconds before it runs and when I finally hit 'scan' button it shows error telling that there is no scaner connexcted to that computer (unfortunatelly i can't paste this error).

Welcome to the HP Forums SamHell,
I see by your post the printer won't scan on the second computer running Windows 7 but it will print over the wired network. I can help you with this issue.
Temporarily turn off the Antivirus software to see if that is blocking the printer communication for scanning.
Test the scan again.
If you are still having issues then check the Windows Image Acquisition (WIA) services.
Windows: HP Scan Software Does Not Open or Scan on a Printer Using a USB Connection.
Disregard the title.
Go to Solution three: Check the Windows Image Acquisition (WIA) services.
I have provided a document for setting up the Firewall to Allow a connection to the printer in case that is causing this issue. Configuring a Firewall to Allow a Connection with the All-in-One in Windows.
Test the scan.
Then you will have to go back in and turn the Antivirus software back on again.
If the issue persists run the Print and Scan Doctor since it might resolve the issue automatically or will find out if it is a driver, Twain, WIA connection or software issue.
Find and fix common printer problems using HP diagnostic tools for Windows?
Please let me know the results.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

LaserJet M1120n MFP - Problems with printing over Wireless Network.

Hi. I have recently purchased a HP M1120n MFP printer. There are three wireless laptops (Vista, & XP Pro) that use this printer via a DrayTek Vigor 27000GE wireless router, then via cat 5 cable to Ethernet on printer.
All three laptops can print, but sometimes the print queue backs ups. The top print job will say "Printing" but it can say this for hours! Then if I delete the print job, it will say "Deleting" - but nothing happens. The only way to clear it is to reboot the laptop.
Firmware datecode is 20080228.
If I connect via USB cable directly to the printer it works correctly.
Any ideas to help resolve this frustrating problem?

The bottomline is that this printer has no way of connecting other than a straight USB connection. In order to make it wireless you have to have a device that will give it an network IP address. The printer by itself can not do this.
The only way to get this printer on a network is to buy a SEPERATE USB Printer Server. Or, buy a separate router, like I said, that has a USB connection on the back that will support printers.
You can not connect it the way you want as it stands right now.
However, call your ISP and have them set it up IF their Gateway device has a USB connection and really can support a printer. It is their issue.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Cannot Scan with HP LaserJet Pro MFP M127fw

I have installed the driver for the printer and tried to follow the instructions in the manual to scan a document. When I find my printer folder in the start menu/All Programs, there is no option there to scan. Help!
This question was solved.
View Solution.

Hi @3Digit ,
I see that you are having issues scanning, there isn't any scanning software in the HP folder. I would like to help you out today.
Open the HP Scan window with one of the following methods:
Double-click the HP Scan icon () for your printer on the Windows desktop.
Click the Windows icon (), click All Programs, click the HP folder, click the name of your printer, and then click HP Scan.
If you are missing the HP Scan software altogether, then the full software didn't install on the computer.
If that is the case, uninstall and reinstall the printer software. Here is the link for the newest drivers. Software & Drivers.
First do these steps, before installing the software, just to make sure it fully installs.
I would disable all the start up programs and temporarily turn off the Antivirus Software and any Real Time Scanning in the Antivirus Software also, to see if that is causing the issue. How to use MSCONFIG . Click on the Startup tab and click Disable all, Then click the Services tab and check Hide All Microsoft Services.
I have provided a document for how to scan. It is for Windows 7, but the steps will also work for Windows Vista.
Scan from Windows 7 With the Full Feature HP Software for HP LaserJet Multifunction Printers
How is the printer connected? (USB/Ethernet/Wireless)
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Scanning with HP LaserJet M1319f MFP

I nave a Dell Studio XPS Dewktop computer with Windows 8.1. I installed the latest version of the driver available on
HP website - IjM1319-hp-pnp-Win64-en.
The printer works; but not the scanner.
Any help will be most welcome.
Thanking you in advance

Welcome to the HP Forums Visva,
I see by your post that you can print but aren't able to scan on the Windows 8.1.
I can help you with this issue.
To rule out a communication issue, make sure the printer is connected directly to a wall outlet.
(don't use a power hub or a surge protector)
The USB cable should be connected directly to the computer. (not a hub)
Temporarily turn off the Antivirus software to see if that is blocking the printer communication for scanning.
Check the Windows Image Acquisition (WIA) services.
Windows: HP Scan Software Does Not Open or Scan on a Printer Using a USB Connection.
Disregard the title.
Go to Solution three: Check the Windows Image Acquisition (WIA) services.
Test the scan again.
I have provided a document for setting up the Firewall to Allow a connection to the printer if the issue persists. Configuring a Firewall to Allow a Connection with the All-in-One in Windows.
If you need further assistance, please let me know the results.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP laserjet M1120n MFP printer not functioning properly with Lion

After installing this printer it will scan but with some flaws in the scanned image and it will not print at all.
All that it displays is that there is an error after attempting to print. I'm wondering if there is some special driver that I need?
The printer is about 4yrs old.
Thank you

Your printer should be supported in Lion. Check to make sure you have the latest drivers installed. Make sure the driver for it is selected in the printer list.
You might try deleting the printer and reading it once the latest driver and software is installed.

HP LaserJet M1120n MFP on windows 2008R2

I already successfully installed my printer for several worstations. I've stucked around installing driver for particular device on Windows 2008 R2. All required updates are installed. I tried to reboot my server. I recieve an error during the installation process. An See error mesage below:
Сигнатура проблемы:
Имя события проблемы:   BEX64
Имя приложения:   ProductInst.exe
Версия приложения:   1.0.5.3
Отметка времени приложения:   4ab9d4f4
Имя модуля с ошибкой:   ProductInst.exe
Версия модуля с ошибкой:   1.0.5.3
Отметка времени модуля с ошибкой:   4ab9d4f4
Смещение исключения:   000000000004750a
Код исключения:   c000000d
Данные исключения:   0000000000000000
Версия ОС:   6.1.7601.2.1.0.16.33
Код языка:   1049
Дополнительные сведения 1:   633f
Дополнительные сведения 2:   633f67d61a3759516e3ad278573b8915
Дополнительные сведения 3:   955c
Дополнительные сведения 4:   955c679802f6c72f18586613ec6aaa15
Ознакомьтесь с заявлением о конфиденциальности в Интернете:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0419
Если заявление о конфиденциальности в Интернете недоступно, ознакомьтесь с его локальным вариантом:
C:\Windows\system32\ru-RU\erofflps.txt

Hi,
The Printer is not compatible with Windows Server 2008, Windows Server 2003 is the only supported server OS.
You may find its specifications listed below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01118375&tmp_task=prodinfoCategory&cc=us&dlc=en...
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Hp laserjet m1132 mfp can't print from remote desktop

Hi, i've installed HP LASERJET M1132 MFP in my PC with windows 7 ultimate 32 bit and it works fine. But when i connect using remote dekstop with our Windows server 2008 r2 64 bit. its not printing. error "test page failed to print , would you like to view the print troubleshooter for assistance?" and it doesnt solved the problem.
please help

Thank you for your interest.
The situation is a bit different than the picture. Windows Server 2008 R2 is available through the WAN. LAN is plugged into the PC-1, PC-2 and Konica Minolta printer. HP LaserJet M1120n MFP is connected via USB to the PC-1. OKI ML 3320 printer is connected via LPT also to the PC-1. PC-1 has access to Konica Minolta printer via the LAN. PC-2 also has access to Konica Minolta printer via the LAN. PC-2 is also available for PC-1 HP and OKI.
It seems to me that I found the explanation for the printing problems - some of "my" printers are simply not compatible with Windows Server 2008 R2. I found on the net the following information:
http://www.windowsservercatalog.com/item.aspx?idItem=cdde267a-800d-2d9f-1f0c-225cabd6838e&bCatID=128...
http://www.windowsservercatalog.com/item.aspx?idItem=31df9819-ca52-4684-dc3b-8e31b70c77d7&bCatID=128...
http://www.windowsservercatalog.com/item.aspx?idItem=6475235d-8dbb-9e95-11dc-3575d569acc2&bCatID=128...
http://www.windowsservercatalog.com/item.aspx?idItem=59731747-9976-8d51-dcbb-7664cbc17a89&bCatID=128...
I think I can close the topic.
(translated from Polish into English using Google translator)

Scan Feature on Laserjet M1120n MFP

Similar Messages

Maybe you are looking for