Scan Interface

Is it possible to configure cRIO 9102 Chassis under Scan Interface Mode? I am planning to use to 9012 Controller.

Hi Cooldude,
Thanks for your post and I hope your well today.
The requirements for Scan Engine for cRIO is,
Software:
Real-Time Module 8.6+
NI-RIO 3.0+ with Scan Mode Support installed on cRIO
Hardware:
The majority of cRIO hardware does support Scan mode; however, the following do not:
Controllers: NI 9002, and NI 9004
Backplanes: NI 9101, NI 9102, and NI 9072
THEREFORE
You cant.
BUT
To use the 9102 you can do the following trick,
Using CompactRIO Scan Mode with Unsupported Backplanes
http://digital.ni.com/public.nsf/allkb/122E971F52FD081A86257500007A046C?OpenDocument
hope this helps,
Kind Regards
James Hillman
Applications Engineer 2008 to 2009 National Instruments UK & Ireland
Loughborough University UK - 2006 to 2011
Remember Kudos those who help!

Similar Messages

Virus Scan Interface (VSI) for external Virus Scanner Certification

Hello *,
I'm searching for Information's, how to certify an external scan software for the SAP VSI - Interface? Which person can I contact to get detailed information's or are there some more information's in the SDN, SAP Homepage and SAP Service Marketplace?
Regards Ingo

Hi Ingo,
The ICC has this interface: Security - SAP Virus Scan Interface (NW-VSI)
SAP NetWeaver - SAP Virus Scan Interface 2.0 (NW-VSI 2.0) [original link is broken] which might help you answer your question. Let me know if this helps!
Regards,
John Ta

Virus Scan Interface for SAPu00BF?

Hello!:
We have a NW2004s installed in a Windows Server 2003 SR2 Enterprise Edition SERVER, and we want to install the Virus Scan Interface.
In Note OSS 817623, SAP explain how to integrate a virus scan into SAP applications.
Do you know this solution???? (Performance, Quality, etc)
Thanks in advanced...

Hi,
We are facing same issue with upload of file.
Error is as follows.
virus scan profile /SIHTTP/HTTP_UPLOAD is not active.
But We are not able to find this profile in Virus scan profiles.
I search for this profile, but not got any info abt how to maintain it.
So can you suggest something here.
Regards,
Abhay

Scan interface mode erreur -805

Bonjour,
Je suis débutant de système Compact RIO. J'ai quelques questions sur le scan interface mode.
Le matériel que j'utilise est
le contrôleur cRIO-9012 et chassis cRIO-9101 intégré
une carte AI 9205
une carte DIO 9401
Je voudrais utiliser le scan interface mode pour comprendre le fonctionnement des cartes, dans le FPGA interface mode, ça prend du temps pour la compilation.
Le chassis ne supporte pas le scan interface mode, alors je configure les 2 cartes individuellement en utilisant les I/O variables. Ensuite je crée un VI tout simple pour lire la tension de la carte AI. J'obtient une erreur -805 : Timing source ,synchroniser avec le moteur de balayage.
J'ai vérifié aussi dans MAX, le soft NI scan Engine est bien installé.
Quelqu'un pourrait me dire d'où vient ce problème?
Merci d'avance.
Lily
Solved!
Go to Solution.
Attachments:
scan interface mode.zip ‏22 KB

Bonjour,
Erreur -805
est relatée à un bug dans la version localisée de LabVIEW.
LabVIEW Stops Execution After Synchronizing With Scan Engine :
http://digital.ni.com/public.nsf/allkb/81977F8BE192C7C48625754C0075D93E?OpenDocument
Erreur
-66205 peut être un résultat de l'erreur précédente, mais aussi parce que les
variables partagées ne sont pas déployées (correctement).
Comme expliquer dans l'article proposer par « speleato »
(http://digital.ni.com/public.nsf/allkb/122E971F52FD081A86257500007A046C), vous
devez compiler et exécuter le « Blanc VI » du FPGA enfin the déployée la
logique nécessaires pour le « scan mode », utilisant la fonction « Open
FPGA VI Reference » dans le « test 9205.vi ».
Le moment
que la logique est déployée, l'erreur doit être disparue.
ENGLISH :
Error -805 is related to a bug in the localized versions of
LabVIEW.
LabVIEW Stops Execution After Synchronizing With Scan Engine :
http://digital.ni.com/public.nsf/allkb/81977F8BE192C7C48625754C0075D93E?OpenDocument
Error -66205 can be a result of the previous error, but more
likely it is because the shared variables are not deployed (correctly).
As explained in the article refered by « speleato » (http://digital.ni.com/public.nsf/allkb/122E971F52FD081A86257500007A046C),
you need to compile and execute the « blanc VI » on the FPGA target
to deploy the needed « scan mode » logic, using the "Open FPGA VI
Refernce" function in the "test 9205.vi".
Once this is done, the error should have been gone.
Best regards,
Joeri
National Instruments
Applications Engineering
http://www.ni.com/ask
Make our forums great:
If you like the answer, don't forget to "Kudos!".
"Accept the Solution" if your question is answered!

Crear PWM con CompaqDaq o CompaqRIO (Scan interface mode solamente)

Que tal amigos.. Estoy realizando un proyecto en el cual es necesario enviar ya sea digital o analógica una señal PWM pero a altas velocidades.Requiero que la frecuencia máxima sea de 200kHz. Lo he intentado de diferentes maneras pero lo mas veloz que he obtenido son 500Hz. Tambien dispongo de un CompaqRIO 9074 y si pudieran ayudarme de igual forma con este chasis estaría de lujo, solo que también lo he intentado pero no me da los resultados deseados y mas aun porque no estoy familiarizado con la programación en FPGA solo con scan interface mode.
¡Resuelto!
Ir a solución.

Que tal Reno32
Trabajando en Scan Interface:
Dentro de los ejemplos de LabVIEW, viene un proyecto que podemos utilizar como referencia para trabajar con salidas PWM en Scan Interface. Dentro de LabVIEW, seleccionamios Help >> Find Examples y en la pestaña de Search buscamos por la palabra 'PWM'. Hay un proyecto en particular que me gustaría que revisara, el cual se llama "NI 94xx - Pulse Width Modulation - Scan Mode.lvproj". Particularmente este ejemplo lo podemos utilizar para trabajar con un chasis cRIO 9074 y cualquier modulo NI 94xx. Dentro de este proyecto, las salidas digitales de un modulo NI 9401 se configuran como PWM. De hecho si damos click derecho sobre el modulo con el que estemos trabajando, y vamos a Properties, podemos seleccionar que queremos trabajar la salida digital como PWM, y podemos seleccionar la frecuencia a la que deseamos generala.
La máxima frecuencia que podemos alcanzar, trabajando en Scan Mode es de hasta 20 kHz. Dentro de este proyecto, viene el código utilizado para trabajar con estas salidas PWM, que quizá nos pueda servir de referencia.
Trabajando en FPGA:
Ahora bien, si deseamos alcanzar velocidades más altas, esto lo podemos lograr bajandonos a configurar el FPGA de nuestro cRIO. De igual forma, dentro de Help >> Find Examples, buscando en la pestaña Search por 'PWM', hay un proyecto titulado "PWM Generation.lvproj" el cual nos puede servir de referencia para configurar con salidas PWM configuradas directamente desde el FPGA. De igual forma, le comparto el 'Getting Started with CompactRIO and LabVIEW', en donde viene una sección de 'Creating a PWM Loop', en donde vienen los pasos sobre como crear una salida PWM configurarada directamente en el FPGA.
Getting Started with CompactRIO and LabVIEW
http://www.ni.com/pdf/manuals/372596b.pdf
Espero que esta información le resulte útil. Puede explorar las dos opciones y decidir cual forma de trabajar se adecúa mejor a su aplicación.
Un saludo !
Omar R.
Applications Engineer

Please explain Virus Scan Interface?

When we run virus scan on SAP server CPU utilization go high ,SAP team advice us to disable the virus scan.
They told us that they Virus interface in SAP. My question how it work is it ok not to install Antivirus softwares on SAP server

Architecture of the Virus Scan Interface & help me in defining Defining Scanner Groups
The structure of the Virus Scan Interface allows you to combine different products, systems, and platforms to scan your applications for viruses. This is possible, since SAP provides a certified interface for the virus scan products of other vendors.
The partners virus scan engines can, for example, have completely different architectures. However, by integrating an adapter using a proprietary connection, any partner can, however, connect any existing virus scan product to the virus scan interface.
On the SAP side, different VSILIB layers are used to include the ABAP and Java worlds, and to deal with platform dependencies (of operating systems and processors, that is, 32 or 64 bit) in the integration of the virus scan interface.
Use
A scanner group combines multiple virus scanners of the same type to allow load balancing. Since you select the virus scan server using the scanner group when maintaining the virus scan profile, you must assign each virus scan server to a scanner group.
Maintain a scanner group for each product class of virus scanners that are connected to the system using the virus scan server. If you include your own virus scanners with the BAdI VSCAN_INSTANCE, create a scanner group for each implementation of your own scanner and identify these as BAdI implementations.
You can store configuration parameters for each scanner group. These are divided into initialization parameters and scan parameters:
        Initialization parameters are transferred to the virus scan server when it is started, and are required to be able to start the virus scan server. If you use the Business Add-In, these parameters for the method of creating the scan instance are transferred. The parameters contain, for example, the path to the virus signatures.
        Scan parameters are transferred for each scan process and control the behavior of the individual request, such as yes/no for activating the scanning of macros.
For information about which configuration parameters are required or supported by the product that you use, see the documentation for the product.
SAP does not deliver any scanner groups.
Procedure
       1.      In the Implementation Guide, choose (IMG) SAP Web Application Server ® System Administration ® Virus Scan Interface.
       2.      Choose the Execute option next to Define Scanner Groups.
The screen View: Change "Scanner Groups": Overview appears.
       3.      Choose New Entries.
The screen New Entries: Overview of Added Entries appears.
       4.      Specify the data for the scanner group.
Data for the Definition of a Scanner Group
For more information please refer to be link this quite helpful
http://help.sap.com/saphelp_nw04s/helpdata/en/68/c9d8375bc4e312e10000009b38f8cf/frameset.htm
I hope it will be helpful to you.
All The Best
Priyanka
Do Reward Points.

Scanning interface with epaon printer

I have a WF-7520 & WF-4530 & WF-3640 All-in-One Printers. I had been using the WF-4530 for scanning using Adobe Acrobat X, version 10.1.12. The combination of Adobe and WF-4530 worked perfectly for several years. Then the WF-4530 started profusely leaking yellow ink (a product defect) and I replaced it with the WF-3640. The WF-3640 and the WF-4530 does not interface with adobe like the WF-4530 did. A lot of the interface is greyed out and I get the message "WIA Scanner Driver might face problems using 'Hide Scanner's Native Interface' mode. Switching to 'Show Scanner's Native Interface' mode.
I have searched through the manual, when on line and to youtube and can't find information on how to fix the interface problem. Can you help me?

How could anyone "Be Well" with your response/solution? Acrobat does not scan? Well that's obvious. But something is really screwed up here and I also have this same stupid problem. And for well over a decade I've used various versions of Acrobat on numerous scanners and printers, and there are basic requirements set for communicating scanning and printing for both Acrobat and scanners and printers. Are you telling this person that Adobe software has no responsibility to recognize scanner or printer interfaces either with a USB or wireless? This whole interface issue should be a no-brainer and apparently Adobe is the problem!
Ed Horgan (see my problem)

FPGA Analog Input with Scan Interface

Hi all,
I am rather new to the FPGA Module and have a question concerning analog sampling.
Before, I used a cRIO in scan mode to perform following tasks:
A state machine on the host PC performs one task after the other, e.g: output a voltage, run a stepper motor (with the NI 9512), Acquire voltage signals using the scan engine mode, logging data ; next voltage, next stepper position, next measurement, logging to the file,.... and so on.
Now, I want to perform the same task, however, with a sampling rate that exceeds the performance of the scan engine. So I think I need to jump to FPGA Mode.
The question is: Can I "mix" the measurement in FPGA while running others tasks of the state machine in scan mode? In more detail, I only "need" the FPGA Mode for the data acquisition, however, for running the stepper motor the Scan mode is perfectly fine and somewhat easier.
One idea of mine was to create a fpga-vi on the target that acquires a certain amount of voltage samples and sends it to the host. Now, could I run the state machine as I did before, just for the state "voltage measurement" refer to the fpga-vi on the target and get the data?
Thanks for any hint,
Jack

It would be best to not mix the scan engine and the FPGA. Yes, you can do hybrid mode, but it uses A LOT of your FPGA resourses. You can still use the state machine in your host, but you will just need to change the commands slightly to use the FPGA interface instead. Use a DMA FIFO to send your analog data to your host to be logged.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How do i reset a counter in crio scan interface mode

Hai,
I am using cRIO 9104 with NI 9421(DI SINKING) module for my counter application in scan mode.
I have a doubt that how do i reset my counter previous value when my system is in idle mode(i.e stable mode).I tried to use a timeout in property node, But i am not able to put a timeout in my code ,herewith I have attached the printscreen of my program.You can see the timeout option is in hide mode.Any other option is there to reset a counter.Kindly solve this problem and let me know the details.
Thanks and Regards
Jayanthi.K
Attachments:
Untitled.png ‏292 KB

You need to get a refnum for the module. The simplest way to do this is to drag the module in the project onto your block diagram. It will drop a refnum constant for the module. You will find all kinds of useful properties and methods on this refnum. In this case the refnum is of a class named "SD Module" (where "SD" stands for "Specialty Digital") and it has a method on it for resetting counters. See the attached screenshot of the block diagram.
Ross Houston
Senior Software Engineer
RIO Software R&D
Attachments:
reset_counter.png ‏3 KB

Processing of FI invoic via scanning interface

hI
My client are going to buy an external system for scanning of vendor invoices. My question is how to handle the information up to r3. In this external system the user will do all the accountingprocedures and when the invoice is ok this scanning system can create a flatfil with all neccesary information such as vendor amount accounts and so on.
Which idoc can i use to post this invoice up to r/3 ?
// S

hai,
inbound process ...use any of the following as per u requirement
process code CO01.
f.m IDOC_INPUT_BBP_ACC_PO.
process code INVF.
f.m IDOC_INPUT_INVOIC_FI.
OUTBOUND PROCESS.
process code SD09.
f.m IDOC_OUTPUT_INVOIC.
SHAN

NI 9220 not supported by scan interface

Looks like the NI 9220 is not supported by cRIO scan mode:
http://www.ni.com/white-paper/8136/en/
It's mostly a sign of inadequate communication between the hardware and software sides of my project, but this threw a major wrench in my gears recently. I wasn't anticipating any difficulties like this because it doesn't seem like a super exotic module. Anyone know if there are plans in work to have this module supported?

Hello Jose,
The latest version of NI-Indcom for DeviceNET was released in april, before LV 2012 was released. The upcoming version of the driver should support LV 2012, but until then, we advise our customers to use LV 2011 or earlier.
Best regards,
Eric M. - Application Engineering Specialist
Certified LabVIEW Architect
Certified LabWindows™/CVI Developer

RT Scan interface mode

hi guys
i want to do a scan mode for a CompactRIO and my friend has not the hardware (cRIO) so i want to know if the Scan Mode requires the hardware or not and if it's possible to make a virtual cRIO plz help help help

Hello,
You can use a certain level of “simulation” capabilities…more like setting up off line devices as explained in Document ID: 3W6EFRLX.
Unfortunately in Scan mode these features won’t help much if you truly want to simulate the behavior of your program but if you only want to start building the application and preparing the VIs before getting the hardware then it should help you get started.
Also, you can try to work around the limitation by running your RT VI on the windows Host and the module related logic on FPGA with simulated IO.
I hope this helps
Alejandro | Academic Program Engineer | National Instruments

TWAIN interface for scanning..

Can someone please tell me what they are doing for a scanning interfaced under Windows7 64 bit? I hate the WIA interface. Is there a way to get TWAIN to work?

I did that... I moved the optional plug-in into the plug-in folder. It does not work correctly. I would just like to know if this something that Adopbe is working on? I have 2 Canon multifunction printers and it's really a problem. Photoshop versionn 7 worked fine. Who is responsible for this- Adobe or the scanner manufactuer?

How to scan multiple pages in one file

I would like to know how to scan multiple pages into one file. There is no add button that comes up. I have a HP Officejet 8600 and a macbook pro. Please help, this would really help me out.

Open Preview and use its "Import From Scanner" option in the File menu. This will launch the scanning interface, which has some standard and basic scanning controls. If you choose "PDF" as the file format to save as, then you will see an option to scan all images to one file. When you do this, you will scan and edit them individually, but Preview will save them to the same file when saved.

Scanning with HP

Is there an HP scan utility / download that I am missing? Perhaps something else?
1) I installed OS X 10.6.4 via installation disk.
2) When I installed it, I chose NOT to install the printer drivers and NOT to install printer drivers for printers close to me. At the time of install I did not have a printer connected to the machine.
3) After OS X 10.6.4 install, still with no printer attached, I did the Software Update to OS X 10.6.5.
4) Then I attached my HP Deskjet F4400 series All-In-One to the MBP via USB.
5) Via Software Update, I installed The HP Driver Version is 2.3.1 (latest via Mac Software Update). Apple states: HP Deskjet F4400 series: 2.3.1 is able to Print and Scan (http://support.apple.com/kb/HT3669#HP).
6) I am able to print and can scan using Mac's Print & Fax, and can scan via Mac's Print & Fax, Image Capture, and Preview.
7) So, what is the problem?
The scan feature, using Mac's Print & Fax, Image Capture, and Preview is rather "cumbersome" (see below) to configure to get a scan and I am wondering if this is a) just the nature of the OS X 10.6.5 scan, b) just the nature of the HP Deskjet F4400 series, c) just the nature of the driver, d) some combination of a, b c, or something I am not considering.
To explain the idea of "cumbersome" I will describe a common scan task that I would like to accomplish:
1) Load the document on the flatbed scanner (correctly aligned on the flatbed) - in this example I am trying to scan my AppleCare Protection Plan Certificate. I think it is a good example since it is on 8.5 x 11 paper, it has title case, letter format, with name, address, part number, a bar code, a table, and text, url, etc.
2) From System Preferences, open Print & Fax, the HP Deskjet F4400 is listed, choose the Scan button, click Open Scanner. This takes me to the same scan window that I could also get to if using Image Capture, and Preview. The scanner 'warms up" and displays the AppleCare Protection Plan Certificate that I would like to scan (I am on the details page).
3) This is where it is cumbersome. Now, despite altering the "Kind", "Resolution", or "Detect Separate Items" the scan will automatically pick out the table in the document and the size will auto-adjust to 6.75 x 0.55 inches (the size of the table that is automatically selected - but I don't want to scan the table, I want to scan the entire document).
4) The only way I have found to capture / scan the entire document is to:
a) Insert 8.5 x 11.0 in the size boxes (on the details page). This has the effect of selecting more of the document, but the document is cropped at the bottom - it is not selecting the entire 11.0" of the 8.5 x 11.0 of the actual document. If I attempt to put in 12 to replace the 11 (in hopes of capturing the entire document), then I get the message drop-down "The value ”12” is too big (Maximum value is 11.69333)." I discard the change and it is now back at 11.0.
b) However, when I drag the bottom of the selected cropped image to the bottom of the document, the 11.0 now changes to 12.57 in the size box (- recall I could not just type anything greeter than 11.69333 as mentioned in the previous step - but now with the selection, it goes to the 12.57 - that just does not seem right).
c) Now, I can click Scan and the image / document will get scanned (in this example - to ScanTest01.pdf in Documents).
If I try to manipulate the above method in any other way (and I have tried many, many different approaches, toying around with the different options on the details page) then I will either get several scans (it will scan each "Detect Separate Items" and scan it to its own pdf - i.e. a pdf with just the table and a pdf with table and text) or a cropped scan. In the case of getting several scans, I really don't think I should be burdened with the "overhead" of going into Documents and deciding which one it is that I actually want and then deleting the others.
In my opinion, it does not seem like I should have to tweak the scan settings so much just to get a "simple" document scan of a 8.5 x 11.0 document. I might be more appeased if I could set the size or other scan settings somewhere (i.e. if I need to keep it at 8.5 x 12.57 - select the entire page - something), but I have not been able to do that. I need to go through the entire - choose 8.5 x 11.0, drag the 11 to 12.57, scan - not ideal for one document - terrible if many documents need to be scanned.
I noticed in other posts that some people refer to an HP Printer folder or an HP Scan utility. Apparently, I do not have one. I am wondering if I might get one if I download the entire HP Printer Drivers v.2.5.2 for Mac OS X v10.6 (http://support.apple.com/kb/DL907) and if this would "fix" the issues I am having. Normally, I would just give it a try, but really don't want to install a bunch of of drivers that I may not need, or may inadvertently add to the confusion of the issue at hand (that driver package contains the HP Driver Version is 2.3.1 that I have installed)
I have also reset my printing system, emptied cache files, and re-added the printer / scanner, deleted it, added it, etc any number of times, with each trial of the scan, but does not seem to change anything as related above.
I have been to the HP site, "How to Scan in Mac OS X 10.6 without Using HP Software" (http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01910186&lc=en&dlc=en&cc=us &product=3837411#N202), which basically tells one to use the Print & Fax method.
I have also read the HP Support document (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&task Id=115&prodSeriesId=3742084&prodTypeId=18972&prodSeriesId=3742084&objectID=c0184 6935) which clearly states:
Scanning
New with Snow Leopard, the Scanning interface to these HP Inkjet All-in-One devices is now built into Snow Leopard and supported with the Apple Image Capture application. There are three ways to perform scanning from your HP All-in-One:
* Preview program
* Image Capture program
* System Preferences > Print & Fax
and
HP Utility
The latest HP Utility is included in Mac OS X 10.6.
So it seems like I should be fully setup for scanning - but if that is the case, then the scanning is not really ideal.
Does anyone have any feedback on if this is all working as it is supposed to and I should expect it to be "cumbersome" or if there is something that I mentioned or am totally missing that I need to do or tweak to get past the "cumbersome" aspect of the process? Does anyone have better results with another printer? Thanks for any feedback.
* Maybe in another post, but also related, I eventually got the ABBYY FineReader Express Edition for Mac. I was hoping this install (I need the searchable / have selectable text anyway) - installed after the above issues (which still remains) might bypass the cumbersome aspect. ABBYY FineReader will take the scanned files (pdfs) and make them searchable / have selectable text. However, it currently will not find my HP Deskjet F4400 as a source to scan from, so have to select the file after it is scanned from the above method. So far very pleased without their product, I have a support tick in with them to see what might be the case with that issue.

Thanks Dale,
I did review your post previously (did not mention it in the above manifesto ) but did not try it because when going through the process via the HP Support & Drivers site (http://welcome.hp.com/country/us/en/support.html), the only download available for the HP Deskjet F4400 was the "HP Deskjet Full Feature Software and Drivers - Mac OS X v10.4, v10.5, and v10.6", which, at the time, seemed a bit much just to get the HP Deskjet F4400 scanning to work well on OS X 10.6.5 and HP also says not to use it (see below).
But now, thought it might be worth a try and did the following (first on a bootable clone):
1) Reset the printing system
2) Deleted the files under printers folder
3) Deleted the hp plist file under preferences
4) Downloaded and installed the "HP Deskjet Full Feature Software and Drivers - Mac OS X v10.4, v10.5, and v10.6" from the hp site
5) Added back the printer
6) At this point, if I went to Print & Fax, and tried to open the scanner, it would show "Trying to open scanner session" and then "Failed to open a session on this device"
7) Did Software Update, which offered up the HP 2.5.2 drivers for the device, and installed these
8) Then everything "worked"
-- The Print & Fax scan still operates as above (rather poorly)
-- The HP Scan works well (found under the newly installed HP folder under apps)
-- The HP Deskjet F4400 shows up in the ABBYY FineReader (seems to offer better OCR than the IRIS software that HP uses)
Yea! - So, apparently if you throw "everything" into the mix, it seems to work. It just seems odd that HP would state (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&task Id=115&prodSeriesId=3742084&prodTypeId=18972&prodSeriesId=3742084&objectID=c0184 6935):
Scanning
New with Snow Leopard, the Scanning interface to these HP Inkjet All-in-One devices is now built into Snow Leopard and supported with the Apple Image Capture application. There are three ways to perform scanning from your HP All-in-One:
* Preview program
* Image Capture program
* System Preferences > Print & Fax
And then give a big warning that says:
Important: Please do not reinstall software from original HP Photosmart, Officejet, Deskjet CDs, or HP web downloads from previous Mac OS X 10.3, 10.4, or 10.5. Older software is not compatible with Snow Leopard. The latest Snow Leopard compatible software is included in Mac OS X 10.6, and you will experience the best performance and functionality if you use the latest HP software.
Oddly enough, HP does have a link on the above page to get the the HP Scan application (despite their warning), but it resolves to a "We're very sorry! The page you requested can not be found."
Well they should be sorry, even though things got to working, I went ahead and ordered a Canon PIXMA MX870 Wireless Office All-in-One Printer (sure it will have its own set of frustrations, just that after I got to looking at it, seamed nice and good time for new printer - will still keep the HP around)
Now only if Airport Base Station would allow the ability to scan .

Scan Interface

Similar Messages

Maybe you are looking for