SCAN listner is not supporting any services

Hi Gurus,
We have 10.2 database running on 11.2 Grid. 10.2 and 11.2 softwares were installed with different os users(oracle and oragrid respectively).
Now the issue is that,
After the DB was brought up SCAN listener shows it does not support any services when we do a lsnrctl status against SCAN listener name as oragrid user.
I am under the assumption that once we bringup DB SCAN listener should be supporting the DB service automatically, please clarify.
Also is it supported to run Database and Grid softwares as different users.
Thanks,
Aditya

Nothing happens "automatically' There are defaults and there are configurations. You may want to check with Oracle Support to see if SCAN is even supported/supportable on 10g. While it is purported to "work?", I have not seen where it is supported.
See:
http://www.oracle.com/technetwork/products/clustering/overview/scan-129069.pdf
As damorgan said,
did you create any services - in 11gRAC you would remove the entry service_name parameters and create the service. I would add make sure local/remote_listener parameters are set correctly. (see the SCAN doc above.)

Similar Messages

HT5457 I have iPhone 4 which i bought from Bahrain and it was working there just fine. However, now I'm in India but my phone is not supporting any SIM. What can I do please suggest guys? Thanks in advance

I have iPhone 4 which i bought from Bahrain and it was working there just fine. However, now I'm in India but my phone is not supporting any SIM. What can I do please suggest guys? Thanks in advance

Sounds like your iPhone is locked to the wireless carrier you used
in Bahrain. Contact that wireless carrier to see if they offer unlocking
and if you qualify. Only the carrier to which the iPhone is locked
can unlock it.
What does it say when you look at Settings=>General=>Carrier?
Remember that the warranty is not international. You will have to
return the iPhone to Bahrain for repair/replacement if it needs service.

ESB control not displaying any services

Hi,
I'm trying to get a SOA Suite installation going last few days. This is the state of the system:
database - 10g Release 2 (10.2) for windows
patches -
Patch Set 2
Patch 18: 6812783
Oracle SOA Suite 10.1.3.3.0
patches -
Patch Set 3
Interim Patch for bugs :6128263
Other than installing these components, I have not done anything else with the system.
When I go to the ESB control and log in as oc4jadmin I do not see any services like-
1) Default System
2) BPEL System
I redid the whole install process thinking I might have missed out some step, but I see the same error again. Has anybody seen this before? what trouble shooting steps would you recommend ?
thank you very much!
Odie

Hi,
Have you installed the ESB schema properly?
Cheers,
Abhi...

I Ponty Chadha | My iPhone is not supporting any videos. Help?

Hi,
My self ponty chadha, i want to know solution about i Phone video supported problam.Because my iphone is not supporting any videos.So please suggest me.

Contact your phone carrier.

HT3302 my new iphone5 screen got cracked.i bought it from australia and i live in India.Now i'm not getting any service in india.what i should do now??plz help

my new iphone5 screen got cracked.i bought it from australia and i live in India.Now i'm not getting any service in india.what i should do now??plz help

You will have to return to Australia to get it serviced.

HT4241 my mac mini is not supporting any of converters

my mac mini is not supporting any of converters

It changes something from one kind of thing to a different kind of thing.
Better question would be what kind of converter and what are you trying to convert?

[svn:fx-trunk] 8690: Remove all of haloclassic since it is not supported any longer

Revision: 8690
Author:   [email protected]
Date:     2009-07-20 12:32:14 -0700 (Mon, 20 Jul 2009)
Log Message:
Remove all of haloclassic since it is not supported any longer
bugs:http://bugs.adobe.com/jira/browse/SDK-20729
qa: no
checkintests: pass
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-20729
Modified Paths:
    flex/sdk/trunk/build.xml
    flex/sdk/trunk/frameworks/build.xml
Removed Paths:
    flex/sdk/trunk/frameworks/projects/haloclassic/
    flex/sdk/trunk/frameworks/themes/HaloClassic/

Gordon, it looks like its been a while since you made this post. Not sure how valid it is now...   I am particularly interested in the LigatureLevel.NONE value. It seems that it is no longer supported.
How do I turn of ligatures in the font rendering?
My flex project involves trying to match the font rendering of Apache's Batik rendering of SVG and ligatures have been turned off in that codebase. Is there any way (even roundabout) to turn ligatures off in flash?
Thanks,
Om

I installed new 6.0.1 os it is done succesfully but after that insterted my sim it is showing sim card not supported any one plz help me

i installed new 6.0.1 os it is done succesfully but after that insterted my sim it is showing sim card not supported any one plz help me

That message occurs when updating a phone that was hacked to be used with your network. Upgrading the phone has re-locked it to it's rightful carrier. You will need a SIM from the original carrier to proceed.

I Upgraded to 10.8.5 but the epson perfection scan 1670 is not supported. Where I can find a driver?

I upgraded to the latest mountain Lion but my Epson perfection 1670 scan is no longer supported. I have also an HP scan but it's not like my beloved Epson! I went to the Epson site but the only thing they sad is that I have to look for an upgrade at the app store. The app store displays that there isn't any upgrade to do. The Epson support says I have to look for the ICA Image Capture Architecture of Apple...
I have no idea what is that ICA, anyway anybody knows where I can find it and download it form make my scan work?
Hope you can help.

I have the same problem. The latest update broke my Epson Perfection 1670 scanner. Image Capture would say that it is warming up and eventually would give me an error. It happened immediately after the 10.8.5 update, so I know it was the driver.
Here is how I got my scanner to work again:
Go to this folder (shift-command-G from the FInder):
/Library/Image Capture/Devices/
Look for a file called "EPSON Scanner". The new one is version 5.6.0. This one DOES NOT work.
I went to another computer that I did not update and looked for the same file. The old version that still works is 5.3.12.
I deleted the new version and copied the old one inside that folder.
Presto. My scanner is working again.

When playing dvds on my Macbook my TV states "mode not supported" Any ideas?

When playing DVD's on my Macbook my TV states "mode not supported". Any ideas?

The DVD may be in PAL TV format and not compatible with North America, Japan, parts of South America and Asian equipment which is NTSC. PAL is compatible with Europe, Asia and parts of South America.

File Data Source: does not support any other host except LOCALHOST?

I am using US 1.0.3.
This exercpt is from the OTN iLearn Subscribed course titled "Oracle9i UltraSearch New Features" on operating system file access:
"The file protocol is used only for the machine that launches the crawler. You can not specify any other host for this kind of URL, except LOCALHOST."
Does it mean that US 1.0.3 can not be used to search other file servers on the network? For example, we have US 1.0.3 installed on a server S1 which is on a network with other servers (e.g. S2). I want to use US to search files in the folder myDir on server S2. So I tried to create a file data source with this URL:
file://\\s2\myDir\
But I got this error:
Invalid file protocol URL: file//\\s2\myDir\
Hostname of the file URL "file://\\s2\myDir\ is not "localhost".
My question:
(1) Can US 1.0.3 search files on a different server than the one US is running on?
(2) If so, how to specify the URL using the above example for it to work?
(3) If not, how about the newer version of US, 9.2 or 9.02? Can they be used to search files on other network servers/drives?
(4) If no to question (3), is there any plan to support this in the future version of US?
My comment: Not able to search other servers really limits the userfulness of US. I really hope Oracle will consider adding this capability.
Thanks!

More on my previous questions:
Since I posted my previous question, I have read on the 1.0.3 online help that we can define remote crawlers to crawl "on a remote machine other than the Oracle Ultra Search database". So I assume this is how to make US to search on other servers. In the online documentation it also includes the following paragraph on "Remote Crawler Profiles Page":
"Use this page to view and edit remote crawler profiles. A remote crawler profile consists of all parameters needed to run the Ultra Search crawler on a remote machine other than the Oracle Ultra Search database. A remote crawler profile is identified by the hostname. The profile includes the cache, log, and mail directories that the remote crawler shares with the database machine. "
The Remote Crawler Profiles Page, however, displays only remote crawlers already defined and the page seems to be used just for editing the porfiles of these defined remote crawlers.
My questions:
(1) How do I create the remote crawlers and defines the profiles in the first place?
(2) Where can I find more documentation on remote crawlers?
(3) Once the remote crawlers are set up, how do I specify the file URLs for each remote crawler?
(4) With US9.02 or 9.2, does remote crawler work the same as in 1.0.3, or are there any enhancements?
Thanks!

TAF not supported - any recent changes ?

TAF does not meet all the requirements for a truly transparent failover mechanism -
Is there any changes in 11g that make TAF failover "transparent" ?
http://support.esri.com/index.cfm?fa=knowledgebase.techarticles.articleShow&d=27653
There are several limitations when using Oracle TAF. See the Oracle MetaLink document 97926.1 "Failover Issues and Limitations" for additional information. The following list contains the primary reasons why ArcGIS, including read-only applications, cannot support TAF:
1. In progress or active transactions are automatically rolled back. The client application is therefore required to 're-apply' all changes since the last successful commit point.
2. All PL/SQL package states are lost.
3. All ALTER SESSION statements are lost.
4. Continuing work on existing cursors may raise an error. For example, "ORA-25401 cannot continue fetches".
5. Failed over selects may raise an error.
6. All rows in global temporary tables are lost and removed upon the connection's exit.
7. All reference to cursors (SQL statement handles) that the session is explicitly holding are lost.
8. Sessions do not transparently failover when the server node dies, while the session is waiting for a response.

Thanks junaid375,
Metalink Doc - 154069.1 says that Developer applications do not support TAF, and it recommends looking at document 97926.1 for "Failover Issues and Limitations".
Wouold you be able to elaborate on your idea for embedding TAF failovr within the forms. I saw you said that your client did -
+"Before every insert,update,delete..they call a procedure which check the connection health and if session is dead (due to the failure of instance it was connected to) it will re-login to surviving instance, and perform DML. Its viable if you don't have hundreds of Forms in application."+
Some details will help a lot of folks considering TAF with developer applications.
Thanks,

Error msg after scan "ADF does not contain any pages"

HP office jet 6600 has worked well for months, but recently 3 out of 5 times that I tried to scan from the ADF, whether one page or many, the scanner runs through its cycle and then gives me the following error: “The scanner automatic document feeder (ADF) does not contain any pages. Insert the pages to be scanned into the ADF and try again.”
Sometimes I just run it again and it works. I'm using HP scan that came with the 6600 download full driver package; running Windows 7 64-bit. I use the scanner significantly and it has operated perfectly for over a year and I haven't changed anything that I know of.Appreciate any help that somebody can give me… I have cleaned rulers and "flicked the little white thing", and some of the other things that were mentioned for similar problems.

Hello I would be happy to help you with the automatic document feeder (ADF) issue you are having with the Officejet 6600. Even though it's a different issue this document has several steps you can try; Vertical Bands, Lines, or Streaks in Copies, Faxes, or Scans. I've copied the applicable steps here for you. Clean the scanner glass and scanner lid If the scanner glass or the white underside of the lid has fingerprints, smudges, lint, dust, or other debris, this can slow performance and affect copy and scan quality. To resolve this issue, clean the product.Before you begin, gather the following materials:Several clean, soft, lint-free clothsMild glass cleaner
CAUTION:Use only glass cleaner to clean the scanner glass. Do not use cleaners that contain abrasives, acetone, benzene, or carbon tetrachloride. These substances can damage the product. Avoid isopropyl alcohol (rubbing alcohol) because it can leave streaks on the glass.Press the Power button () to turn off the product.Disconnect the power cord from the rear of the product.Lift the scanner lid.
Figure : Lift the scanner lid
Spray a clean, soft, lint-free cloth with mild glass cleaner.
CAUTION:To protect the scanner, do not spray the glass cleaner directly on the glass.Clean the scanner glass, and the glass strip next to the scanner glass, with the lint-free cloth.
Figure : Clean the scanner glass and the glass strip
Clean the white underside of the scanner lid.
Figure : The underside of the scanner lid
Dry the scanner glass and the glass strip thoroughly with a clean, dry cloth or chamois to prevent spotting, and then dry the white underside of the scanner lid.
NOTE:Do not use paper-based wipes or tissues that can leave fiber residue.Close the scanner lid.Reconnect the power cord to the rear of the product.If the product does not turn on by itself, press the Power button () to turn it on.Try to copy, fax, or scan again.If these steps resolved the issue, you do not need to continue troubleshooting.If the issue persists, continue to the next solution.
Clean the automatic document feeder (ADF)
Follow these steps to clean the automatic document feeder (ADF), and then make blank copies to check if the issue is resolved.Step one: Clean the ADF rollers and separator padFollow these steps to clean the automatic document feeder (ADF).Gather the following materials:A clean, lint-free cloth, or any cloth that will not come apart or leave fibersDistilled, filtered, or bottled water (tap water might damage the product)Remove any originals from the document feeder tray.
Figure : Remove any originalsPress the Power button () to turn off the product.Disconnect the power cord from the rear of the product.Lift the cover of the ADF until it stops.
Figure : Lift the ADF cover
Locate the pick rollers and the separator pad.
Figure : Locations of the pick rollers and the separator pad
The ADF coverThe pick rollersThe separator padLightly dampen a clean lint-free cloth with distilled or bottled water, and then squeeze any excess liquid from the cloth.Use the damp cloth to wipe any residue off of the separator pad.
Figure : The separator pad
Use the damp cloth to wipe any residue off of the pick rollers.
Figure :
Dry the rollers and the separator pad with a clean, dry, lint-free cloth.Do not close the ADF cover. Continue to the next step to clean the glass strip in the automatic document feeder.
Clean the glass strip in the automatic document feeder
Follow these steps to clean the glass strip underneath the mechanism in the automatic document feeder (ADF).
NOTE:The images in this step might not be of your product, but the steps are the same.If you have not done so already, disconnect the power cord from the rear of the product.Remove any originals from the document feeder tray.
Figure : Remove any originals
Open the ADF cover, and then lift the ADF mechanism.
Figure : Lift the ADF mechanism
Lightly dampen a clean, soft, lint-free cloth with a mild glass cleaner.Gently clean the glass strip inside the ADF, and then thoroughly dry it to prevent spotting.
Figure : Clean the glass strip
Lower the ADF mechanism back into place, and then close the ADF cover.Step three: Make a blank copy using the scannerFollow these steps to make a blank copy using the scanner.Lift the scanner lid.Figure : Lift the scanner lidRemove any originals from the scanner glass.Close the scanner lid.Load unused, plain white paper into the input tray.From the home screen on the product control panel, touch Copy ().Touch Start Black to start the copy.If the copy is clean, continue to the next step to make a copy using the ADF.If the copy has vertical bands, lines, or streaks, there might be dust inside the product, poor internal connections, or the product might be damaged. Please let me know if these steps resolved your issue, or if there is anything else I can do to help. I look forward to hearing from you! Thanks,

I am looking for LabVIEW instrument drivers for Audioprecision test equipment. It looks like you do not support any Audioprecision intruments?

I also do not see any support for Keithley 2420 Sourcemeters.

Hi Kristen,
If you search www.Keithley.com you will find an instrument driver for the 2420 device. Go to the "downloads" section and search for 2400.
I am not sure what you mean by Audioprecision instruments. If you had a specific driver in mind, I would check with the instrument manufacturer. Often times they develop and support the drivers since they know the instruments far better.
If you do not see the driver on their website, please submit a request at http://zone.ni.com/idnet97.nsf/instrumentdriverrequest/ and with the instrument manufacturer.
We develop drivers based on demand and popularity so the more requests we have for it, the greater the possibility that we will develop one.
If you would like to try developing your own instrument driv
er (or modify the existing one), we have documentation, model instrument drivers, and driver templates to help at:
http://www.ni.com/devzone/idnet/development.htm
Hope this helps out!
Best Regards,
Aaron K.
Application Engineer
National Instruments

Snow leopard not supported any more? security updates for safari

Apparently the latest security updates for safari have been released for lion & mountain lion but not for 10.6. I have had some problems updating to lion so I'm still on snow leopard. Does this mean snow leopard is not officially supported any more? Not sure if this should be of concern to me. I would like at least the security related updates to be up to date on my machine.

Don't hold your breath.
With the possible exception of the odd critical security patch (like the recent Java ones) there are unlikely to be any further updates for Snow Leopard.

SCAN listner is not supporting any services

Similar Messages

Maybe you are looking for