Scan overview vs. scan

I connect my Mac to the printer J6480 All in One with a USB. It scans it in "scan overview." It does not save it anywhere on my computer. When I then hit "scan" it says "done scanning selected areas." I cannot figure out what to do. Everything is up to date.

Hey there folks! Welcome to the community, @CodyJsCurious
For the both of you, your printers do not have "full" drivers available on Mavericks, as the OJ J6480 and the PS C4480 are older models. Basically, there is no HP scan software for your units on your Macs, so you will need to use another method for scanning. The link below will show you your methods. I do suggest a few steps first to try and overcome the problems you're having.
Always test the printer hardware before troubleshooting the software. A copy will do the trick, just to make sure the printer is in good functioning order before you troubleshoot on the computer. If there is a copy issue, there will be software problems, so it's best to get that step out of the way.
In order, try:
Mac OS X: How to reset the printing system
Repair disk permissions
Restart the Mac
Re-add the printer
Here are the links for your units that will show the scanning method options you have, they are under the FAQ's section:
OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

Scan Overview numbers not matching inventoried items

I am not sure if I am looking into this too deep or something (probably) When I check the Scan Overview page the numbers are not adding up (see image)
I would think that the numbers added up on the left should equal the number of devices I have inventoried? Maybe there is a "grey" area with manually entered printers in inventory?
This topic first appeared in the Spiceworks Community

um well.. im not expert but have you checked if your memory is full? that might be the reason and i know that some songs and videos are in different types of files such as "wma" that dont play on your ipod. although you are supposed to have a pop-up telling you about that.. maybe that is the reason why you dont have all your files on your ipod?

I have used Image Capture to scan images/documents and then saved them as either PDFs or PNG files. For some reason, just this past week Image Capture will no longer save the file. It scans, and the Scan Results window pops up, but it won't save file.

I have used Image Capture to scan images/documents and then saved them as either PDFs or PNG files. For some reason, just this past week, Image Capture will no longer save the file. It scans, and the Scan Results window pops up, but it won't save file.
The file name has no special character in it, just letters and no spaces.
I have done this in the past and it has worked, but now it will not.
I have not upgraded any software, that I am aware of.
After scanning, the Image Capture pops up the Scan Results with the file name in the window, but neither the Scan Results nor the Image Capture window responds to inputs. The Image Capture window is frozen, with only the "Overview" and "Cancel" buttons active (but non-responsive).
Is this a software issue or a scanner hardware issue? I am using a HP Photosmart C6200 series printer/scanner on a network using a Time Capsule airport.
Thanks.

I had the same problem.
Got a 90% fix. Apparently the Mavericks preferences won't work with Yosemite, so I just deleted the Image Capture preferences.
Unfortunately, the "Scan to" folder seems to be permanently set to the Pictures folder.
1. Quit Image Capture
2. Go to Finder > Go > Home, which opens up your home folder (named after your user name)
3. Open Library > Preferences > com.apple.ImageCapture.plist - Drag this file to the Trash
4. Start "Image Capture", click "Details" and change all your settings as you prefer
5. Quit and restart "Image Capture". Notice it remembers all your settings except "Scan to" folder. It insists on saving to "Pictures".
That's as far as I was successful. I tried changing the "Scan to" folder to "Desktop", but on launch, Image Capture always sets it back to "Pictures".
This is what I tried:
6. Download and install "Pref Setter" from http://www.nightproductions.net/prefsetter.html
7. Quit "Image Capture". Right-click on "com.apple.ImageCapture.plist" and open with Pref Setter.
8. Search for "Pictures", which finds "~/Pictures" (the tilde character at the start means your home directory).
9. Double-click on "~/Pictures" and change it to the folder you prefer. I like "~/Desktop"
10. Choose File > Save then Quit from Pref Setter. Note that re-opening the plist file still shows "~/Desktop"
11. Start up "Image Capture" -- on startup, "Image Capture" sets "Scan to" folder to "Pictures"
I consider this a bug.

HP Scan and network scanning

Hello,
An office I support has 2 PCs which were configured to scan from a networked LaserJet Pro 200 color MFP M276nw, recently one of them stoped scanning properly while another continues to scan.
I spent about 5 hours attempting to fix this last night and now I am reaching out to the community for assistance. I'll list out the facts and perhaps you can ponder them and get back to me:
- The PC where it functions properly has the printer installed with Web Services as the transport.
- This same PC has "HP LJ200 M276 Scan" under "Imaging devices" in Device Manger, which is ideal and lets HP Scan work correctly.
- On the bad PC, HP Scan attempts to scan and the lamp moves down the range of the flatbed, but eventually it comes back with a generic wordy message regarding a communication issue.
- I have tried driver and software removal/installation in various order, both with Web Services and using a IP port.
- I tried restating the three WIA services, and turning off the firewall.
- I have tried HP Doctor, it complained of a WIA issue at one time, at a different time it claimed that it fixed a WIA issue.
- When I install using Web Services, HP Scan does not get installed, and the device just says "WDP Scanning Device" or something of that nature.
- With Web Services, I can right-click on the device, choose Scan, and everything works fine; however this is not the HP Scan interface which has built-in PDF creation and the customer needs it because staff have been trained for it.
- When I install HP Scan, it only wants to use the "HP LJ200 M276 Scan" device and if it is unavailable or disabled it does not proceed.
- I have not found a way to get HP Scan to simply use the "WDP Scanning Device" even though it seems like that would work, even tried renaming it in the registry but perhaps it is associated with UUIDs?
Please help, thanks in advance
Mike Kantor

Hi mekantor,
I see by your post that you are unable to scan from the one computer.
I can help you with this issue.
If the scanner drivers are installed, try and see if you can scan from Paint.
You can try and reinstall the HP scan software separately to see if that will resolve the issue.
Go to start, computer, right click on the CD for the printer installation and left click on open.
Open the setup folder, product folder, and then Scan_App folder.....HPScanLJM.....msi -
right click and select install.
If you are still having issues then do the following steps:
Do a msconfig and disable any start up programs and temporarily turn off any Antivirus Software and the Real Time Scanning. (affects the scanning software) How to use MSCONFIG.
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%.
Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted.
Uninstall the software again. Uninstalling the Printer Software.
When the uninstall has completed, restart the computer.
Follow these steps to reset the registry settings and options for Windows Installer.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Openbox, type msiexec /unregister, and then click OK.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box.
In the Open box, type msiexec /regserver, and then click OK.
If you have any difficulty with this step, please use this link to perform it another way.
Restarting Windows Installer.
Run Disk cleanup from Start/All Programs/Accessories/ System Tools. <How to Delete files using Disk Cleanup
Download and install the latest version of Adobe flash player. http://www.adobe.com/support/flashplayer/downloads.html
Restart the computer.
Reinstall the printer software. HP LaserJet Pro 200 color MFP M276nw Drivers.
Check for the HP Scan software and test the printer.
If it fails to install the full software, run the Print and Scan Doctor to see if you get another WIA error.
Find and fix common printer problems using HP diagnostic tools for Windows?
Please provide in detail the results if you are still having issues.
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Deskjet 3050 all-in-one J610 series Displays "scan error-Try scan from computer"

Running I-Mac Lion. Have scanned in the past without problem. Today went to scan and "Scan Error Try scan from computer" appears on display. Why? How to correct the problem? HELP PLEASE

Hi NavyDave,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that you are having issue with scanning to your computer. I see that you are getting an error on your printer when attempting to scan. I'm giving you a document that troubleshoots Communication Error between the Scanner and Your Computer in Mac OS X v10.4, v10.5, or v10.6.
Please write back if you require additional assistance.
Thank you.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

How do you configure what folder Scan to Computer scans to?

I am able to initiate a Scan to Computer > Scan to PDF from the printer control panel. The file is placed on my Macbook in the Docuements folder. I would like to configure the folder it places the file in. Is that possible? Note I am not choosing Scan to Network Folder as I have issues with that which I will create a different post for.
This question was solved.
View Solution.

Hi @tfeeneytx
If you open HP Utility, you should see Scan to Computer. Double click on the icon,
then click on the Scan Tasks tab;
Select any presets that apply to your scan job.
Click the Edit... button, change any desired settings (such as scan destination) , and then click OK.
To start the scan, click Test.
Please let me know if this resolves the issue, thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

How to failover SCAN VIP and SCAN Listener from one node to another?

Environment:
O.S : HP-UX B.11.31 U ia64
RDBMS: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
It is a 2 Node RAC.
Question:
How to failover the SCAN VIP and SCAN LISTENER running on node 1 to node 2?
What is the relation between standard LISTENER and SCAN LISTENER ?
Why do we need LISTENER, when we have SCAN LISTENER ?
When I tried with SRCVTL STOP LISTENER , I thought the SCAN LISTENER adn SCAN IP will failover, but it did not?
Also please clarify if I use SRVCTL RELOCATE SCAN -i 1 -n Node1
Actalluy I am trying that by moving the SCAN listeners so that when I do PSU 7 patching on 1 node, no incoming attempt to connect will spawn
a process and thereby opening files in $ORACLE_HOME (which would prevent the patch from occurring)
Please clarify my queries.
Thanks, Sivaprasad.S

Hi Sivaprasad,
1. The following link will help you for SCAN VIP and SCAN LISTENER failover from 1 node to another.
http://heliosguneserol.wordpress.com/2012/10/19/how-to-relocate-scan_listener-from-one-node-to-another-node-on-rac-system/
http://oracledbabay.blogspot.co.uk/2013/05/steps-to-change-scan-ip-address-in.html
2. The Standard LISTENER is specific for particular node for which it is running. It cannot be relocated as its specific for the node its running. SCAN listeners are not replacements for the node listeners.A new set of cluster processes called scan listeners will run on three nodes in a cluster (or all nodes if there are less than 3). If you have more than three nodes, regardless of the number of nodes you have, there will be at most three scan listeners. So no relation for standard LISTENER and SCAN LISTENER.
3. Hmmm. let me put it in easy way for this question. All the RAC services like, asm, db , services, nodeapps registers with this SCAN_LISTENER. So if any of these services (asm, db , services, nodeapps) got down/not running, the SCAN_LISTENER will know the down status, and if any client requests to access the node/service which is down, the SCAN_LISTENER will redirect the client request to the least loaded node. So here all these process will happen without the knowledge of client. And As usual the standard LISTENER looks only for incoming request to connect with the database. So we need both LISTENER and SCAN LISTENER.
4. If you provide SRCVTL STOP LISTENER, it stops the default listener on the specified node_name, or the listeners represented in a given list of listener names, that are registered with Oracle Clusterware on the given node. No failover will happen under this case.
5. Yes you can relocate if you want to relocate the scan.
Hope this helps!!
Regards,
Pradeep. V

How to check small table scan full table scan if we will use index in where clause.

How to check small table scan full table scan if i will use index column in where clause.
Is there example link there i can test small table scan full table if index is used in where clause.

Use explain plan on your statement or set autotrace traceonly in your SQL*Plus session followed by the SQL you are testing.
For example
SQL> set autotrace traceonly
SQL> select *
2 from XXX
3 where id='fga';
no rows selected
Execution Plan
   0      SELECT STATEMENT Optimizer=ALL_ROWS (Cost=13 Card=1 Bytes=16
          5)
   1    0   PARTITION RANGE (ALL) (Cost=13 Card=1 Bytes=165)
   2    1     TABLE ACCESS (FULL) OF 'XXX' (TABLE) (Cost=13 Card
          =1 Bytes=165)
Statistics
          1 recursive calls
          0 db block gets
       1561 consistent gets
        540 physical reads
          0 redo size
       1864 bytes sent via SQL*Net to client
        333 bytes received via SQL*Net from client
          1 SQL*Net roundtrips to/from client
          0 sorts (memory)
          0 sorts (disk)
          0 rows processed

Time Machine, Deep event scan at path: /Volumes/Data reason:must scan subdirs|require scan|

Had a data drive failure, replaced it. Restored just that volume's data from TM to the new drive via "cp -a".   For some reason just that drive (DATA) forces a full scan at every TM backup.   Have also upgraded to 10.8.1 to see it that would fix things, but no.
from .Backup.log:
Running preflight for "Data" (mount: '/Volumes/Data' fsUUID: 35066226-2A07-3845-AF7F-69FE0268B156 eventDBUUID: 6DA5C1F4-C522-48B2-892A-36362C54F632)
        Scanning nodes needing deep traversal
        Deep event scan at path: /Volumes/Data reason:must scan subdirs|require scan|
        Calculating size of changes
        Should copy 61 items (76 KB) representing 18 blocks of size 4096. 510751904 blocks available.
Preflight complete for "Data" (mount: '/Volumes/Data' fsUUID: 35066226-2A07-3845-AF7F-69FE0268B156 eventDBUUID: 6DA5C1F4-C522-48B2-892A-36362C54F632)
Time elapsed: 0.002 seconds
Mind you at this point, I've excluded all of the contents of DATA from actually being backed up (the 61 items is a separate bug in backupd where it reports file counts incrementally instead of per volume), it was doing a FULL copy every time, regardless of what actually changed.
From everything I've been able to read/find/fiddle with, the part that doesn't make sense is the the "require scan" on the "Deep event" line above. Other people have had problems with full scans, but it's usually something about 'no fsevents db' or "fsevents reset"..   this one feels like a setting somewhere telling it to do a full scan, and that's where I'm lost.
The only thing I haven't done yet is fully reset the TM machine drive.. I'll do it, but in theory there should be a reason that will fix this. I.e. a setting on there I could fix instead. I'm not a big fan of reboot/reinstall/... method of fixing things, it just hides the problem instead of solving it.
And to make this into a question.. how do I fix "Data" to be more like my "Video" drive :
Running preflight for "Video" (mount: '/Volumes/Video' fsUUID: A34192F9-20D3-3CCD-B80D-D55FC4EF34DC eventDBUUID: 2BD9CE6F-CCC5-456C-B1E4-26111ADAF2BE)
        Calculating size of changes
        Should copy 58 items (32 KB) representing 7 blocks of size 4096. 510751904 blocks available.
Preflight complete for "Video" (mount: '/Volumes/Video' fsUUID: A34192F9-20D3-3CCD-B80D-D55FC4EF34DC eventDBUUID: 2BD9CE6F-CCC5-456C-B1E4-26111ADAF2BE)
Time elapsed: 0.000 seconds
Thoughts?

when this one went off, I wasn't even home. only safari, console, terminal and finder running. though there is a cp running to copy things off of the Data drive to an external usb for safety's sake.
syslog:
8/26/12 7:46:56.322 PM com.apple.backupd[4449]: Starting automatic backup
8/26/12 7:46:58.576 PM com.apple.backupd[4449]: Backing up to: /Volumes/Time Machine/Backups.backupdb
8/26/12 7:47:05.840 PM com.apple.backupd[4449]: Forcing deep traversal on source: "Data" (mount: '/Volumes/Data' fsUUID: 35066226-2A07-3845-AF7F-69FE0268B156 eventDBUUID: 9CD375B1-5483-4D33-8759-1B5AC2E9A7E7)
8/26/12 7:47:06.009 PM com.apple.backupd[4449]: Using file event preflight for Fast
8/26/12 7:47:07.420 PM com.apple.backupd[4449]: Will copy (207 KB) from Fast
8/26/12 7:47:07.421 PM com.apple.backupd[4449]: Using file event preflight for Video
8/26/12 7:47:07.421 PM com.apple.backupd[4449]: Will copy (Zero KB) from Video
8/26/12 7:47:07.733 PM com.apple.backupd[4449]: Deep event scan at path:/Volumes/Data reason:must scan subdirs|require scan|
8/26/12 7:47:07.733 PM com.apple.backupd[4449]: Finished scan
8/26/12 7:47:25.056 PM com.apple.backupd[4449]: Found 2112 files (26.2 MB) needing backup
8/26/12 7:47:25.064 PM com.apple.backupd[4449]: 1.92 GB required (including padding), 2.46 TB available
8/26/12 7:48:31.092 PM com.apple.backupd[4449]: Copied 1258 files (4.3 MB) from volume Fast.
8/26/12 7:48:36.552 PM com.apple.backupd[4449]: Copied 1264 files (4.3 MB) from volume Video.
8/26/12 7:57:01.251 PM com.apple.backupd[4449]: Copied 3328 files (29.6 MB) from volume Data.
8/26/12 7:57:01.571 PM com.apple.backupd[4449]: Using file event preflight for Fast
8/26/12 7:57:02.468 PM com.apple.backupd[4449]: Will copy (46 KB) from Fast
8/26/12 7:57:19.956 PM com.apple.backupd[4449]: Found 2088 files (26.1 MB) needing backup
8/26/12 7:57:19.957 PM com.apple.backupd[4449]: 1.92 GB required (including padding), 2.41 TB available
8/26/12 7:58:04.441 PM com.apple.backupd[4449]: Copied 428 files (263 KB) from volume Fast.
8/26/12 7:58:15.160 PM com.apple.backupd[4449]: Copied 434 files (263 KB) from volume Video.
8/26/12 8:06:45.605 PM com.apple.backupd[4449]: Copied 2498 files (25.6 MB) from volume Data.
8/26/12 8:06:55.112 PM com.apple.backupd[4449]: Created new backup: 2012-08-26-200653
8/26/12 8:07:26.837 PM com.apple.backupd[4449]: Starting post-backup thinning
8/26/12 8:07:26.837 PM com.apple.backupd[4449]: No post-back up thinning needed: no expired backups exist
8/26/12 8:07:26.882 PM com.apple.backupd[4449]: Backup completed successfully.
.Backup.log
2012-08-26-19:47:05 - Starting backup
Previous snapshot:
          /Volumes/Time Machine/Backups.backupdb/Peter Drier’s Mac Pro/2012-08-26-192548
Date of Previous snapshot: 1346023548470589
Will use FS events for "Fast" (mount: '/' fsUUID: 79881815-0EDF-3698-A685-315F87B9BE52 eventDBUUID: F0683183-083A-408F-930C-AAE5DA0C3F5E)
Gathering events since 7162257515116441245.
Will use FS events for "Video" (mount: '/Volumes/Video' fsUUID: A34192F9-20D3-3CCD-B80D-D55FC4EF34DC eventDBUUID: 2BD9CE6F-CCC5-456C-B1E4-26111ADAF2BE)
Gathering events since 7162257515113311785.
Will traverse "Data" (mount: '/Volumes/Data' fsUUID: 35066226-2A07-3845-AF7F-69FE0268B156 eventDBUUID: 9CD375B1-5483-4D33-8759-1B5AC2E9A7E7)
=== Starting backup loop #1 ===
Will use IncrementalBackupCopier
Running preflight for "Fast" (mount: '/' fsUUID: 79881815-0EDF-3698-A685-315F87B9BE52 eventDBUUID: F0683183-083A-408F-930C-AAE5DA0C3F5E)
          Calculating size of changes
          Should copy 48 items (207 KB) representing 50 blocks of size 4096. 600903601 blocks available.
Preflight complete for "Fast" (mount: '/' fsUUID: 79881815-0EDF-3698-A685-315F87B9BE52 eventDBUUID: F0683183-083A-408F-930C-AAE5DA0C3F5E)
Time elapsed: 1.412 seconds
Running preflight for "Video" (mount: '/Volumes/Video' fsUUID: A34192F9-20D3-3CCD-B80D-D55FC4EF34DC eventDBUUID: 2BD9CE6F-CCC5-456C-B1E4-26111ADAF2BE)
          Calculating size of changes
          Should copy 48 items (207 KB) representing 50 blocks of size 4096. 600903601 blocks available.
Preflight complete for "Video" (mount: '/Volumes/Video' fsUUID: A34192F9-20D3-3CCD-B80D-D55FC4EF34DC eventDBUUID: 2BD9CE6F-CCC5-456C-B1E4-26111ADAF2BE)
Time elapsed: 0.001 seconds
Running preflight for "Data" (mount: '/Volumes/Data' fsUUID: 35066226-2A07-3845-AF7F-69FE0268B156 eventDBUUID: 9CD375B1-5483-4D33-8759-1B5AC2E9A7E7)
          Scanning nodes needing deep traversal
          Deep event scan at path: /Volumes/Data reason:must scan subdirs|require scan|
          Calculating size of changes
          Should copy 2112 items (26.2 MB) representing 6400 blocks of size 4096. 600528095 blocks available.
Preflight complete for "Data" (mount: '/Volumes/Data' fsUUID: 35066226-2A07-3845-AF7F-69FE0268B156 eventDBUUID: 9CD375B1-5483-4D33-8759-1B5AC2E9A7E7)
Time elapsed: 17.634 seconds
Processing preflight info
          Space needed for this backup: 1.92 GB (468018 blocks of size 4096)
          Preserving last snapshot /Volumes/Time Machine/Backups.backupdb/Peter Drier’s Mac Pro/2012-08-26-192548
Finished processing preflight info
Copying items from "Fast" (mount: '/' fsUUID: 79881815-0EDF-3698-A685-315F87B9BE52 eventDBUUID: F0683183-083A-408F-930C-AAE5DA0C3F5E)
Finished copying items for "Fast" (mount: '/' fsUUID: 79881815-0EDF-3698-A685-315F87B9BE52 eventDBUUID: F0683183-083A-408F-930C-AAE5DA0C3F5E)
Time elapsed: 1 minute, 6.000 seconds
          Copied 1258 items (4.3 MB)
Gathering events since 7162257515117251301.
Needs new backup due to change in /private/var/db/.dat1161.001
Copying items from "Video" (mount: '/Volumes/Video' fsUUID: A34192F9-20D3-3CCD-B80D-D55FC4EF34DC eventDBUUID: 2BD9CE6F-CCC5-456C-B1E4-26111ADAF2BE)
Finished copying items for "Video" (mount: '/Volumes/Video' fsUUID: A34192F9-20D3-3CCD-B80D-D55FC4EF34DC eventDBUUID: 2BD9CE6F-CCC5-456C-B1E4-26111ADAF2BE)
Time elapsed: 4.589 seconds
          Copied 1264 items (4.3 MB)
Gathering events since 7162257515113311785.
Copying items from "Data" (mount: '/Volumes/Data' fsUUID: 35066226-2A07-3845-AF7F-69FE0268B156 eventDBUUID: 9CD375B1-5483-4D33-8759-1B5AC2E9A7E7)
Finished copying items for "Data" (mount: '/Volumes/Data' fsUUID: 35066226-2A07-3845-AF7F-69FE0268B156 eventDBUUID: 9CD375B1-5483-4D33-8759-1B5AC2E9A7E7)
Time elapsed: 8 minutes, 24.000 seconds
          Copied 3328 items (29.6 MB)
=== Starting backup loop #2 ===
Will use IncrementalBackupCopier
Running preflight for "Fast" (mount: '/' fsUUID: 79881815-0EDF-3698-A685-315F87B9BE52 eventDBUUID: F0683183-083A-408F-930C-AAE5DA0C3F5E)
          Calculating size of changes
          Should copy 23 items (46 KB) representing 11 blocks of size 4096. 588570106 blocks available.
Preflight complete for "Fast" (mount: '/' fsUUID: 79881815-0EDF-3698-A685-315F87B9BE52 eventDBUUID: F0683183-083A-408F-930C-AAE5DA0C3F5E)
Time elapsed: 0.898 seconds
Running preflight for "Video" (mount: '/Volumes/Video' fsUUID: A34192F9-20D3-3CCD-B80D-D55FC4EF34DC eventDBUUID: 2BD9CE6F-CCC5-456C-B1E4-26111ADAF2BE)
          Calculating size of changes
          Should copy 24 items (46 KB) representing 11 blocks of size 4096. 588550912 blocks available.
Preflight complete for "Video" (mount: '/Volumes/Video' fsUUID: A34192F9-20D3-3CCD-B80D-D55FC4EF34DC eventDBUUID: 2BD9CE6F-CCC5-456C-B1E4-26111ADAF2BE)
Time elapsed: 1.407 seconds
Running preflight for "Data" (mount: '/Volumes/Data' fsUUID: 35066226-2A07-3845-AF7F-69FE0268B156 eventDBUUID: 9CD375B1-5483-4D33-8759-1B5AC2E9A7E7)
          Calculating size of changes
          Should copy 2088 items (26.1 MB) representing 6360 blocks of size 4096. 588164391 blocks available.
Preflight complete for "Data" (mount: '/Volumes/Data' fsUUID: 35066226-2A07-3845-AF7F-69FE0268B156 eventDBUUID: 9CD375B1-5483-4D33-8759-1B5AC2E9A7E7)
Time elapsed: 16.080 seconds
Processing preflight info
          Space needed for this backup: 1.92 GB (468003 blocks of size 4096)
          Preserving last snapshot /Volumes/Time Machine/Backups.backupdb/Peter Drier’s Mac Pro/2012-08-26-194705.inProgress/220D224E-57C5-4AE7-ACC9-B362141889D7
Finished processing preflight info
Copying items from "Fast" (mount: '/' fsUUID: 79881815-0EDF-3698-A685-315F87B9BE52 eventDBUUID: F0683183-083A-408F-930C-AAE5DA0C3F5E)
Finished copying items for "Fast" (mount: '/' fsUUID: 79881815-0EDF-3698-A685-315F87B9BE52 eventDBUUID: F0683183-083A-408F-930C-AAE5DA0C3F5E)
Time elapsed: 44.483 seconds
          Copied 428 items (263 KB)
Gathering events since 7162257515117277992.
Needs new backup due to change in /Users/drierp/Library/Messages/chat.db-wal
Copying items from "Video" (mount: '/Volumes/Video' fsUUID: A34192F9-20D3-3CCD-B80D-D55FC4EF34DC eventDBUUID: 2BD9CE6F-CCC5-456C-B1E4-26111ADAF2BE)
Finished copying items for "Video" (mount: '/Volumes/Video' fsUUID: A34192F9-20D3-3CCD-B80D-D55FC4EF34DC eventDBUUID: 2BD9CE6F-CCC5-456C-B1E4-26111ADAF2BE)
Time elapsed: 10.449 seconds
          Copied 434 items (263 KB)
Gathering events since 7162257515113311785.
Copying items from "Data" (mount: '/Volumes/Data' fsUUID: 35066226-2A07-3845-AF7F-69FE0268B156 eventDBUUID: 9CD375B1-5483-4D33-8759-1B5AC2E9A7E7)
Finished copying items for "Data" (mount: '/Volumes/Data' fsUUID: 35066226-2A07-3845-AF7F-69FE0268B156 eventDBUUID: 9CD375B1-5483-4D33-8759-1B5AC2E9A7E7)
Time elapsed: 8 minutes, 30.000 seconds
          Copied 2498 items (25.6 MB)
Some filesystem changes made during the course of the backup may not be accounted for. Still busy after 2 retries.
Backup complete.
Total time elapsed: 19 minutes, 47.000 seconds

Mac 10.9.4 : hp photosmart c4795. scan error. try scan from computer or see documentation. press ok

I have a Mac running Mavricks which the wireless printing works with my HP Photoshmart C4795 Printer but the wireless scanning to my Mac is not working. I am getting the error: "hp photosmart c4795. scan error. try scan from computer or see documentation. press ok"
It used to work. I've downloaded and installed the patch for Mavericks.
I have searched for other solutions but none are for a Mac to do a diagnostic test on the HP page.
Any solutions to make this feature work again?
Thanks!

Hi,
Scanning from the front panel is no longer available on Mavericks as there is no Full Feature Software for the operating system.
Using the provided solution, you may scan using Image Capture. preview or Printers & Scanners.
Below you may find the steps to scan on 10.9:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03550518&tmp_task=useCategory&cc=us&dlc=en&lc=e...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Scanning with Mavericks, scanning with Mavericks

I have a HP Photosmart Premium C410a Allin One Printer Scanner but can't seem to find how to produce a RTF or Txt scan . Can anyone help?
MacBook Pro Retina
Bob Wines

I should be more clear. Scanning with HP Scan, I can scan and see a preview. I can save the file ONCE but the image or docuement is garbled when I open the saved file. If I try to save again using a different format (and a different name), I get the error:
"An error has occured saving the file because it could not be written to. Check the proerties for the file to make sure it is not read-only."

How to print from Image Capture Scan Overview

Image Capture 2.1.4, on Powerbook G4, with Mac OS 10.3.9, can take an Overview, low-resolution prescan from my scanner. I could then choose to print the prescanned image.
This allowed for a fairly convenient copy facility, but with preview before printing.
No image save was necessary or desired.
With Image Capture 4.0, on Macbook Pro, with Mac OS 10.5.5, print of the prescanned image includes the entire Image Capture panel (Scan mode, bit depth, resolution, format, etc.)
Why do I want to print all that?
Is there a way with Leopard to set Image Capture to print just the scanner image without the panel and without image save?
Thanks,
Wrekngcrew

I wish I had an answer...I'd like to know how to just print something from Image Capture instead of generating a file, then having to print it from Preview....

HP Officejet J4680 won't let me scan, displaying no Scan options selected. How do I go about it? Bob

I am having scanning problems, as the unit displays 'No Scan Options. Refer to Documentation to trouble shoot!

Try the document I linked below. Let me know if it worked.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02450835
Binary_Zen (worked at HP )
Click the white Kudos star to say thanks
Please mark Accept As Solution if it solves your problem

My Pixma MX925 prints from wireless laptop Win8.1 but won't scan. Only scans to desktop.

How can I set up my Canon Pixma MX925 to scan to wireless laptop running Windows 8.1, no problem in printing.
Desktop connected by ethernet prints and scans. Printer only offers option to scan to desktop.
Have searched unsuccessfull to find answer.

Hello Eduardo_Hebilla,
I'm sorry to hear that you are unable to scan wirelessly to your Officejet Pro 8500. I can see that you have tried to set a manual IP and this did not help fix the problem and you are still seeing the message "Scanner Not Found". I have researched this issue for you and I will post the troubleshooting guide below for you to follow.
You will need to choose your Operating System and continue following the steps from there.
'The scanning device could not be found '
I hope this helps!
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

I have an IMac and would like to scan and edit scans can anyone suggest a scanner for the Mac

Help. I have an IMac and I want to scan and be able to edit my scans and I have received so many different opinions on how to do this. Buy a separate scanner or buy an all in one that scans but you have to get software to edit. It is really confusing so before I purchase a scanner I need to know if anyone else is doing this and what machine should I buy. Thanks for the help.

SaugusGirl wrote:
Hi and thanks for replying. I have a management company and I would like to scan a document and then be able to go in and make changes if necessary. Some people told me to purchase a Fujitsu 1500 scanner for the Mac which costs about 500.00 but didn't think I needed something that sophisticated and then another opinion was to get an all in one but I need software to edit and no one seems to know what software to purchase. Thanks again for your input.
Get the Fujitsu (Get the M1500, the S1500 is for Windows), it comes with ABBy Fine Reader OCR software that is probably less good than Vuescan but for printed text works just fine, handwriting is a different matter. It is about $500 (look around, under $400 is sometimes possible) don't buy the S version, none of the software will work on a Mac. I've used this scanner fairly often, it's better than the price would suggest.

Scan overview vs. scan

Similar Messages

Maybe you are looking for