Scan Rate - Sample Rate confusion with the E-Series

I have been reading a lot of post on the messaging board concerning the scan rate and the sample rate but I still dont get it. I am using an E series and am aware that this card does not have a simultaneous
sampling of each channel
I want a time stamp for each value i get from each channel. If I have channels 1,2,3,4 with rate dividors
1,2,4,8
sample rate set to X
scan rate set to X/(Number of channels+1) (ghost channel in order to avoid error -10092) ie X/5
what is the sample rate of each channel ?

VKral,
Here are a few KnowledgeBase entries that I hope will clear up the confusion:
Data Acquisition Sampling Terminology
http://digital.ni.com/public.nsf/websearch/DBE7AC32661BCF9B86256AC000682154?OpenDocument
How Is the Actual Scan Rate Determined When I Specify the Scan Rate for My Data Acquisition?
http://digital.ni.com/public.nsf/websearch/5782F1B396474BAF86256A1D00572D6E?OpenDocument
Hope this helps. Have a great day!

Similar Messages

I purchased an IPAD2 for my special needs daughter. She only currently understands lowercase letters only and gets confused with the uppercase letters. Is there a way to change the keyboard to display lowercase letters?

I purchased an IPAD2 for my special needs daughter. She only currently understands lowercase letters only and gets confused with the uppercase letters. Is there a way to change the keyboard to display lowercase letters?

There is no way for the keyboard itself to display only lower case letters. It doesn't display lower case letters at all for that matter.
When you are using the keyboard - The other issue that you will have is with the shift key. Even with auto caps turned off you can still type capital letters if you tap the shift key and if you double tap it by mistake - it will turn into all capital letters so also turn off Caps Lock in the keyboard settings.
Other than that, there is no way to ensure that you can type in lower case.
Maybe an external bluetooth keyboard would be a better solution but I don't use one, and I have never even seen one in person so someone else will have to verify that for you.

What heart rate monitors will pair with the new iPod nano?

Are there heart rate monitors that will pair with the new 7th generation iPod nano?

It's supposed to support "Bluetooth Smart" HR monitors.
http://support.apple.com/kb/HT5479
There are some listed here:
http://www.bluetooth.com/Pages/Bluetooth-Smart-Devices-List.aspx

Format, use and rate in easy setup with the JVC gy-hm100u

Hi. I am about to start using Final Cut studio with my JVC gy-hm100u camcorder. What format, use and rate should I choose in the easy set up?

sorry missed out some info:
There is a specific codec listed in FCP set up for the JVC GY-HM100, it is only available in version Final Cut Pro 6.04 and later.
In FCP pro v 7 you simply drag and drop to the timeline
Earlier versions of FCP do not support the camera.
The codec used is an XDCam EX codec

Confusion with the use of PDF417 Barcodes

I am trying to get clarification on what is required to utilize the Acrobat Designer to create a form that creates a PDF417 barcode. Here is the scenario:
We would like to create a form with Designer (bundled with Acrobat 7.0 Professional)that will be used as an index sheet for a document scanning system.
The form would contain one or more fields that a user would complete using the standard Acrobat 7.0 Reader that they can download from Adobe. When the user completes the data entry into the fields, they will print out the form (containing the 2D barcode (PDF417).
The form would be scanned and put through recognition software that is supposed to ready PDF417 2D barcodes.
I have read through the literature and have seen inconsistent representations regarding the ability of a user to use the Acrobat reader to complete the form and print it with the PDF417 barcode.
In one of the forum postings a user was told that they needed certain decoder software from Adobe or extensions.
I am not clear if the user filling out a form using Acrobat 7.0 reader, which generates the PDF417 barcode supposedly, can be read by an application which supports that barcode type. Or, if this is a special type of PDF417 barcode that has some additional attributes that requires special software from Adobe to be recognized.
Please explain how I accomplish the objective set forth above.

Mike,
It looks like I scanned over your email a little too quickly and missed a
VERY important point. You mention that your form will be "bundled with Acrobat 7.0 Professional". This is VERY important.
In fact, you will need to license nothing else from Adobe. You DO NOT need Reader Extensions because you are deploying Acrobat Professional on the work stations that will be filling in your forms. You do not need to "turn on" hidden functionality of the Free Reader if you are using Acrobat Pro. You already have all the functionality you need.
Second, when you fill in a Barcoded Form with Acrobat Professional the PDF417 Barcode that is rendered in your form will be a 100% standard PDF417 Barcode. But do not turn on compression. When filled in - in Acrobat - the Barcode is rendered so that it can be read by ANY Decoder that can read PDF417. However, if you enable compression you will need to use the Adobe Decoder. If you start decoding and see you are getting lower than a 99.9% decode rate, take a look at buying the Adobe Decoder. Not the whole "Barcoded Forms" license, just the Decoder.
Again,
if you are using Acrobat to fill in these forms, you have nothing else to buy. If you want to deploy these forms with the Free Reader then you will need to license Adobe LiveCycle Barcoded Forms and possibly ARES.

Display file type, bit rate, sample rate in 12.0.1?

I just upgraded to 12.0.1 running on an old dual quad core running OS10.7.5
I used to be able to customize the ID3 tag fields when displaying my music library.
One important aspect was to view the file type, bit rate, and sample rate as I'm a band/audio producer.
I can now only view those things when I "get info" on each song. This is really painful as I'd like to see a list of all my songs and be able to easily see those 3 fields and sort by them.
Is there a way or did Apple remove this ability therefore making my experience of using iTunes be pretty much ruined?
any help would be much appreciated! thanks...
.k.

One important aspect was to view the file type, bit rate, and sample rate as I'm a band/audio producer.
I can now only view those things when I "get info" on each song. This is really painful as I'd like to see a list of all my songs and be able to easily see those 3 fields and sort by them.
Is there a way or did Apple remove this ability therefore making my experience of using iTunes be pretty much ruined?
Symbion,
The ability is still there, but it is enabled differently.
In Songs view, click the drop-down at the upper right Then click the next drop-down called "Show Columns," as shown below. There, you can pick the columns you want to display, including sample rate, etc.

What types of samples are included with the EXSP?

I'm considering purchasing Logic Express, but wanted to know what types of samples (orchestral, synth, drum, keyboard, etc) are included with the EXSP player. Can anyone owning Logic Express tell me what types of samples are included?
Mac G5 Mac OS X (10.3)

Hello, Jeb247.
This is merely a matter of personal opinion, but I believe that the included samples for EXSP are among the better features of the program. Granted, there are some cases where you have several instruments loosely based on the same samples run through different filters, but you are likely to find a decent array of what you need.
You get all the Garageband instruments, as well as the ability to load the Jam Packs into EXSP. While the following list probably contains some overlap with those samples, it will still give you an idea of what's out there:
The top-level hierarchy lists 41 different groups of sounds. After each listing, I'll note the approximate number of 'instruments' in each group:
Piano (10)
Guitars (11)
Bass (5)
Strings (9)
Horns & Winds (9)
Ethnic Instruments (2)
Voices & Choir (3)
Drum Kits (12)
Effects(~50)
Percussion & Specials (2)
Analog: Bass (45), Leads (20), Pads (17), Percussive Waves (44), SpectrumSQ (25), Sweeps (30), Synthcomp (33), Waveforms (50+)
Digital Chromatic Kits (12), Initial Waveforms (60+), Motion & FX (36), Pad Synths (46), Percussive Waves (23), Synths (31)
FM Bass (17)
Synth Atmospheres Layers (31), Singles (40)
Synth Bass (45), Brass (12), Chords (21), Leads & Hooks (30), LFO Synths (21), Multi Sequence (6), Pads (44), Percussive Synths (44), Poly (28), Sidechain Chords (14), Spacious Effects (40), Strings (16), Sweeps & Swells (32), Vocalish (25)
Now, as to the quality of the sounds... your mileage may vary. For orchestral stuff, nothing appeals to my ears like the Kurzweil -- largely because of those smooooooooooth output filters. That's not to say that the EXSP stuff isn't worth checking out; I just happen to use it for electronic textures and percussion rather than acoustic emulations. The drums simply don't cut it for me -- not nearly enough punch. But -- as I've mentioned before, you ears may report different pleasure levels.
Suffice it to say that the EXSP comes with a substantial array of music-making potential. For the money (a freebie w/ Logic Express) it's a really good deal. Shortcomings in its sound set can be overcome by the careful purchase of additional material where your ears report unsatisfactory sounds. If you don't like the drums, iDrum or Battery might be a good idea (or my personal favorite: an outboard drum machine with dead-short latency...); if the orchestra stuff is weak, there are alternatives there, too.
And your options for synth textures are beyond counting -- though I can specifically recommend the utterly astounding (and free!) Alphakanal "Automat". And you can have a pile of fun with the (equally free) NUSofting daHornet. And... and... the list goes on.
Cheers,
Michael

Confusing with the Global Database Name and Instance Name

Dear fellow DBA's and Experts,
Good Day.
We presently have an existing database registered (on V2 Exadata) with global database name as BIDEV.domainname.com. It has 4 instances viz., BIDEV1 and BIDEV2 which have the same service name as the instance name.
Last week, on our new X4-2 Exadata, we tried to create a fresh database. While doing so, we entered the details as below in the installer:
Global Database Name: BIDEV
SID Prefix: BIDEV
Service Name: BIDEV.
Then upon the successful installation of the database, when we query
1. (SELECT * FROM GLOBAL_NAME), it shows BIDEV as the global database name.
2.
SQL> sho parameter service
NAME                                 TYPE        VALUE
service_names                        string      BIDEV1
3. Sho parameter name gives the below details:
SQL> sho parameter name;
NAME                                 TYPE        VALUE
cell_offloadgroup_name               string
db_file_name_convert                 string
db_name                              string      BIDEV
db_unique_name                       string      BIDEV
global_names                         boolean     FALSE
instance_name                        string      BIDEV_1
lock_name_space                      string
log_file_name_convert                string
processor_group_name                 string
service_names                        string      BIDEV1
Curious to know why it created an instance name as BIDEV_1 instead as BIDEV1.
Had tried another attempt on our test environment with SID prefix as BIDEV1, then the instance was created with the name as BIDEV1_1.
Also, would like to know what happen if we give the Global Database Name as BIDEV.domainname.com for installing the same BIDEV database on a different server while the 1st server is still functional.
Appreciate if someone could throw some light on the above confusion. Any reference material or source to the clarify the doubt.
Warm Regards,
Vikram.

Hi Vikram,
Your clustered database is not full RAC, it's RAC ONE node database. In RAC ONE node database, instance names are created in that format only (i.e.e dbname_1), I don't know if there is any way we can change it to dbname1. OR if you really want to change the instance name to dbname1 format, then you can convert RAC one node database to Full RAC, then remove instance and add another instance, I hope it would be added in dbname1 format. I have not tested it, test it on your test system first.
You can find the database type in the output you shared,
Type: RACOneNode
Regards,
Saurabh

I am confused with the adobe photo shop album starter 3.0!

Hello, I have always been interested in storing pictures on my computer via my scanner or digital camera, but now I want to organise them using adobe.. However it has left me more confused.. since I downloaded it, it automatically imported pictures...but when I click on my regular photo files on my desk top, it does say adobe photo shop at the top of the picture- so does this mean it is already imported into the adobe?? as i am confused with what photos I have got where now.
In other words, I wanna make sure that all my pictures on my computer are in adobe. How do I do that ?
Excuse the daft question but I hate computers sometimes!
Thanks

Hi again Colin(and Jim), if I got the wrong end of the stick (which it appears I did) then I humbly apologise for being oversensitive. I have had some miserable experiences in newsgroup forums before now and witnessed relentless bullying on occasions and so I may respond in a defensive matter automatically. Thank you for setting me straight :-)
On a different tack, I wonder if you could help with another PSASE problem I have. When I go to print a number of prints on one page (eg.four to an A4 sheet-which it resizes to fit for you) there seems to be a loss of quality in the images. Is there a way of adjusting the resolution within the program, or do I need to adjust them within photoshop first ?

M1319F Scan error message " cannot communicate with the scanner"

I have a HP M1319F which was able to print/scan/fax. Recently the fax function has ceased. I have ordered a fax board which will hopefully resolve that problem. Now it does not scan as well. I get the error message " cannot communicate with the scanner" . unistalled and resinstalled the software but to now avail

I have a HP M1319F which was able to print/scan/fax. Recently the fax function has ceased. I have ordered a fax board which will hopefully resolve that problem. Now it does not scan as well. I get the error message " cannot communicate with the scanner" . unistalled and resinstalled the software but to now avail

Confusion with the the variables

I have confusion regarding the use of variables in JSP. When i declare the variable with a <set> tag and then try to use it with scriplet tag,,<% .....%>,,it dosn't work. why so?
<code>
<%@page contentType="text/html"%>
<%@page pageEncoding="UTF-8"%>
<%@ taglib prefix="c" uri="http://java.sun.com/jstl/core_rt" %>
<HTML>
<HEAD>
<TITLE>EDIT YOUR PROFILE</TITLE>
</HEAD>
<BODY BGCOLOR="BLACK" TEXT="WHITE">
<H1 ALIGN="CENTER"><FONT COLOR="YELLOW"><BLINK>REGISTER</BLINK></FONT></H1>
<H2 ALIGN="CENTER">PLEASE FILL IN YOUR DETAILS</H2>
<PRE>
</PRE>
<FORM METHOD="POST" ACTION="enter.jsp">
DELIVERY CHARGES:<td><INPUT TYPE="TEXT" NAME="user_charge1" SIZE="40">
<c:set var="n" value="${param.size}" scope="session"/>
<table>
<%
for(int i=0;i<n;i++){%>
<tr><td>PRODUCT:<td><INPUT TYPE="TEXT" NAME="user_pdt1_1" SIZE="40"><td>PRICE1:<td><INPUT TYPE="TEXT" NAME="user_pr1_1" SIZE="10"></tr>
<%}%>
</table>
<BR>
<PRE>
</PRE>
<P ALIGN="CENTER"><FONT COLOR="YELLOW">THANX FOR YOUR SUPPORT!!</FONT></P>
<P ALIGN="CENTER"><INPUT TYPE="SUBMIT" VALUE="SUBMIT">
<INPUT TYPE="RESET" VALUE="RESET">
</P>
</FORM>
</BODY>
</code>
this is the error generated....
<error>
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: Unable to compile class for JSP
An error occurred at line: 25 in the jsp file: /multiple_entry.jsp
Generated servlet error:
C:\Users\raghu\.netbeans\5.5\apache-tomcat-5.5.17_base\work\Catalina\localhost\temp2\org\apache\jsp\multiple_005fentry_jsp.java:11: illegal start of type
for(int i=0;i<n;i++){
^
An error occurred at line: 23 in the jsp file: /multiple_entry.jsp
Generated servlet error:
C:\Users\raghu\.netbeans\5.5\apache-tomcat-5.5.17_base\work\Catalina\localhost\temp2\org\apache\jsp\multiple_005fentry_jsp.java:119: <identifier> expected
org.apache.taglibs.standard.tag.rt.core.SetTag jspxth_c_set_0 = (org.apache.taglibs.standard.tag.rt.core.SetTag) jspxtagPool_c_set_var_value_scope_nobody.get(org.apache.taglibs.standard.tag.rt.core.SetTag.class);
^
An error occurred at line: 23 in the jsp file: /multiple_entry.jsp
Generated servlet error:
C:\Users\raghu\.netbeans\5.5\apache-tomcat-5.5.17_base\work\Catalina\localhost\temp2\org\apache\jsp\multiple_005fentry_jsp.java:119: <identifier> expected
org.apache.taglibs.standard.tag.rt.core.SetTag jspxth_c_set_0 = (org.apache.taglibs.standard.tag.rt.core.SetTag) jspxtagPool_c_set_var_value_scope_nobody.get(org.apache.taglibs.standard.tag.rt.core.SetTag.class);
^
An error occurred at line: 23 in the jsp file: /multiple_entry.jsp
Generated servlet error:
C:\Users\raghu\.netbeans\5.5\apache-tomcat-5.5.17_base\work\Catalina\localhost\temp2\org\apache\jsp\multiple_005fentry_jsp.java:119: '{' expected
org.apache.taglibs.standard.tag.rt.core.SetTag jspxth_c_set_0 = (org.apache.taglibs.standard.tag.rt.core.SetTag) jspxtagPool_c_set_var_value_scope_nobody.get(org.apache.taglibs.standard.tag.rt.core.SetTag.class);
^
An error occurred at line: 23 in the jsp file: /multiple_entry.jsp
Generated servlet error:
C:\Users\raghu\.netbeans\5.5\apache-tomcat-5.5.17_base\work\Catalina\localhost\temp2\org\apache\jsp\multiple_005fentry_jsp.java:120: <identifier> expected
jspxth_c_set_0.setPageContext(_jspx_page_context);
^
An error occurred at line: 23 in the jsp file: /multiple_entry.jsp
Generated servlet error:
C:\Users\raghu\.netbeans\5.5\apache-tomcat-5.5.17_base\work\Catalina\localhost\temp2\org\apache\jsp\multiple_005fentry_jsp.java:121: <identifier> expected
jspxth_c_set_0.setParent(null);
^
An error occurred at line: 23 in the jsp file: /multiple_entry.jsp
Generated servlet error:
C:\Users\raghu\.netbeans\5.5\apache-tomcat-5.5.17_base\work\Catalina\localhost\temp2\org\apache\jsp\multiple_005fentry_jsp.java:122: <identifier> expected
jspxth_c_set_0.setVar("n");
^
An error occurred at line: 23 in the jsp file: /multiple_entry.jsp
Generated servlet error:
C:\Users\raghu\.netbeans\5.5\apache-tomcat-5.5.17_base\work\Catalina\localhost\temp2\org\apache\jsp\multiple_005fentry_jsp.java:123: <identifier> expected
jspxth_c_set_0.setValue((java.lang.Object) org.apache.jasper.runtime.PageContextImpl.proprietaryEvaluate("${param.size}", java.lang.Object.class, (PageContext)_jspx_page_context, null, false));
^
An error occurred at line: 23 in the jsp file: /multiple_entry.jsp
Generated servlet error:
C:\Users\raghu\.netbeans\5.5\apache-tomcat-5.5.17_base\work\Catalina\localhost\temp2\org\apache\jsp\multiple_005fentry_jsp.java:123: ';' expected
jspxth_c_set_0.setValue((java.lang.Object) org.apache.jasper.runtime.PageContextImpl.proprietaryEvaluate("${param.size}", java.lang.Object.class, (PageContext)_jspx_page_context, null, false));
^
An error occurred at line: 23 in the jsp file: /multiple_entry.jsp
Generated servlet error:
C:\Users\raghu\.netbeans\5.5\apache-tomcat-5.5.17_base\work\Catalina\localhost\temp2\org\apache\jsp\multiple_005fentry_jsp.java:123: <identifier> expected
jspxth_c_set_0.setValue((java.lang.Object) org.apache.jasper.runtime.PageContextImpl.proprietaryEvaluate("${param.size}", java.lang.Object.class, (PageContext)_jspx_page_context, null, false));
^
An error occurred at line: 23 in the jsp file: /multiple_entry.jsp
Generated servlet error:
C:\Users\raghu\.netbeans\5.5\apache-tomcat-5.5.17_base\work\Catalina\localhost\temp2\org\apache\jsp\multiple_005fentry_jsp.java:123: '{' expected
jspxth_c_set_0.setValue((java.lang.Object) org.apache.jasper.runtime.PageContextImpl.proprietaryEvaluate("${param.size}", java.lang.Object.class, (PageContext)_jspx_page_context, null, false));
^
An error occurred at line: 23 in the jsp file: /multiple_entry.jsp
Generated servlet error:
C:\Users\raghu\.netbeans\5.5\apache-tomcat-5.5.17_base\work\Catalina\localhost\temp2\org\apache\jsp\multiple_005fentry_jsp.java:124: <identifier> expected
jspxth_c_set_0.setScope("session");
^
Generated servlet error:
C:\Users\raghu\.netbeans\5.5\apache-tomcat-5.5.17_base\work\Catalina\localhost\temp2\org\apache\jsp\multiple_005fentry_jsp.java:126: illegal start of type
if (_jspx_th_c_set_0.doEndTag() == javax.servlet.jsp.tagext.Tag.SKIP_PAGE) {
^
Generated servlet error:
C:\Users\raghu\.netbeans\5.5\apache-tomcat-5.5.17_base\work\Catalina\localhost\temp2\org\apache\jsp\multiple_005fentry_jsp.java:130: <identifier> expected
jspxtagPool_c_set_var_value_scope_nobody.reuse(_jspx_th_c_set_0);
^
Generated servlet error:
C:\Users\raghu\.netbeans\5.5\apache-tomcat-5.5.17_base\work\Catalina\localhost\temp2\org\apache\jsp\multiple_005fentry_jsp.java:131: illegal start of type
return false;
^
Generated servlet error:
C:\Users\raghu\.netbeans\5.5\apache-tomcat-5.5.17_base\work\Catalina\localhost\temp2\org\apache\jsp\multiple_005fentry_jsp.java:131: <identifier> expected
return false;
^
Generated servlet error:
C:\Users\raghu\.netbeans\5.5\apache-tomcat-5.5.17_base\work\Catalina\localhost\temp2\org\apache\jsp\multiple_005fentry_jsp.java:134: '}' expected
^
17 errors
     org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:510)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:375)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:368)
root cause
org.apache.jasper.JasperException: Unable to compile class for JSP
An error occurred at line: 25 in the jsp file: /multiple_entry.jsp
Generated servlet error:
C:\Users\raghu\.netbeans\5.5\apache-tomcat-5.5.17_base\work\Catalina\localhost\temp2\org\apache\jsp\multiple_005fentry_jsp.java:11: illegal start of type
for(int i=0;i<n;i++){
^
An error occurred at line: 23 in the jsp file: /multiple_entry.jsp
Generated servlet error:
C:\Users\raghu\.netbeans\5.5\apache-tomcat-5.5.17_base\work\Catalina\localhost\temp2\org\apache\jsp\multiple_005fentry_jsp.java:119: <identifier> expected
org.apache.taglibs.standard.tag.rt.core.SetTag jspxth_c_set_0 = (org.apache.taglibs.standard.tag.rt.core.SetTag) jspxtagPool_c_set_var_value_scope_nobody.get(org.apache.taglibs.standard.tag.rt.core.SetTag.class);
^
An error occurred at line: 23 in the jsp file: /multiple_entry.jsp
Generated servlet error:
C:\Users\raghu\.netbeans\5.5\apache-tomcat-5.5.17_base\work\Catalina\localhost\temp2\org\apache\jsp\multiple_005fentry_jsp.java:119: <identifier> expected
org.apache.taglibs.standard.tag.rt.core.SetTag jspxth_c_set_0 = (org.apache.taglibs.standard.tag.rt.core.SetTag) jspxtagPool_c_set_var_value_scope_nobody.get(org.apache.taglibs.standard.tag.rt.core.SetTag.class);
^
An error occurred at line: 23 in the jsp file: /multiple_entry.jsp
Generated servlet error:
C:\Users\raghu\.netbeans\5.5\apache-tomcat-5.5.17_base\work\Catalina\localhost\temp2\org\apache\jsp\multiple_005fentry_jsp.java:119: '{' expected
org.apache.taglibs.standard.tag.rt.core.SetTag jspxth_c_set_0 = (org.apache.taglibs.standard.tag.rt.core.SetTag) jspxtagPool_c_set_var_value_scope_nobody.get(org.apache.taglibs.standard.tag.rt.core.SetTag.class);
^
An error occurred at line: 23 in the jsp file: /multiple_entry.jsp
Generated servlet error:
C:\Users\raghu\.netbeans\5.5\apache-tomcat-5.5.17_base\work\Catalina\localhost\temp2\org\apache\jsp\multiple_005fentry_jsp.java:120: <identifier> expected
jspxth_c_set_0.setPageContext(_jspx_page_context);
^
An error occurred at line: 23 in the jsp file: /multiple_entry.jsp
Generated servlet error:
C:\Users\raghu\.netbeans\5.5\apache-tomcat-5.5.17_base\work\Catalina\localhost\temp2\org\apache\jsp\multiple_005fentry_jsp.java:121: <identifier> expected
jspxth_c_set_0.setParent(null);
^
An error occurred at line: 23 in the jsp file: /multiple_entry.jsp
Generated servlet error:
C:\Users\raghu\.netbeans\5.5\apache-tomcat-5.5.17_base\work\Catalina\localhost\temp2\org\apache\jsp\multiple_005fentry_jsp.java:122: <identifier> expected
jspxth_c_set_0.setVar("n");
^
An error occurred at line: 23 in the jsp file: /multiple_entry.jsp
Generated servlet error:
C:\Users\raghu\.netbeans\5.5\apache-tomcat-5.5.17_base\work\Catalina\localhost\temp2\org\apache\jsp\multiple_005fentry_jsp.java:123: <identifier> expected
jspxth_c_set_0.setValue((java.lang.Object) org.apache.jasper.runtime.PageContextImpl.proprietaryEvaluate("${param.size}", java.lang.Object.class, (PageContext)_jspx_page_context, null, false));
^
An error occurred at line: 23 in the jsp file: /multiple_entry.jsp
Generated servlet error:
C:\Users\raghu\.netbeans\5.5\apache-tomcat-5.5.17_base\work\Catalina\localhost\temp2\org\apache\jsp\multiple_005fentry_jsp.java:123: ';' expected
jspxth_c_set_0.setValue((java.lang.Object) org.apache.jasper.runtime.PageContextImpl.proprietaryEvaluate("${param.size}", java.lang.Object.class, (PageContext)_jspx_page_context, null, false));
^
An error occurred at line: 23 in the jsp file: /multiple_entry.jsp
Generated servlet error:
C:\Users\raghu\.netbeans\5.5\apache-tomcat-5.5.17_base\work\Catalina\localhost\temp2\org\apache\jsp\multiple_005fentry_jsp.java:123: <identifier> expected
jspxth_c_set_0.setValue((java.lang.Object) org.apache.jasper.runtime.PageContextImpl.proprietaryEvaluate("${param.size}", java.lang.Object.class, (PageContext)_jspx_page_context, null, false));
^
An error occurred at line: 23 in the jsp file: /multiple_entry.jsp
Generated servlet error:
C:\Users\raghu\.netbeans\5.5\apache-tomcat-5.5.17_base\work\Catalina\localhost\temp2\org\apache\jsp\multiple_005fentry_jsp.java:123: '{' expected
jspxth_c_set_0.setValue((java.lang.Object) org.apache.jasper.runtime.PageContextImpl.proprietaryEvaluate("${param.size}", java.lang.Object.class, (PageContext)_jspx_page_context, null, false));
^
An error occurred at line: 23 in the jsp file: /multiple_entry.jsp
Generated servlet error:
C:\Users\raghu\.netbeans\5.5\apache-tomcat-5.5.17_base\work\Catalina\localhost\temp2\org\apache\jsp\multiple_005fentry_jsp.java:124: <identifier> expected
jspxth_c_set_0.setScope("session");
^
Generated servlet error:
C:\Users\raghu\.netbeans\5.5\apache-tomcat-5.5.17_base\work\Catalina\localhost\temp2\org\apache\jsp\multiple_005fentry_jsp.java:126: illegal start of type
if (_jspx_th_c_set_0.doEndTag() == javax.servlet.jsp.tagext.Tag.SKIP_PAGE) {
^
Generated servlet error:
C:\Users\raghu\.netbeans\5.5\apache-tomcat-5.5.17_base\work\Catalina\localhost\temp2\org\apache\jsp\multiple_005fentry_jsp.java:130: <identifier> expected
jspxtagPool_c_set_var_value_scope_nobody.reuse(_jspx_th_c_set_0);
^
Generated servlet error:
C:\Users\raghu\.netbeans\5.5\apache-tomcat-5.5.17_base\work\Catalina\localhost\temp2\org\apache\jsp\multiple_005fentry_jsp.java:131: illegal start of type
return false;
^
Generated servlet error:
C:\Users\raghu\.netbeans\5.5\apache-tomcat-5.5.17_base\work\Catalina\localhost\temp2\org\apache\jsp\multiple_005fentry_jsp.java:131: <identifier> expected
return false;
^
Generated servlet error:
C:\Users\raghu\.netbeans\5.5\apache-tomcat-5.5.17_base\work\Catalina\localhost\temp2\org\apache\jsp\multiple_005fentry_jsp.java:134: '}' expected
^
17 errors
     org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:84)
     org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:328)
     org.apache.jasper.compiler.AntCompiler.generateClass(AntCompiler.java:249)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:297)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:276)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:264)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:563)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:303)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:368)
note The full stack trace of the root cause is available in the Apache Tomcat/5.5.17 logs.
Apache Tomcat/5.5.17
</error>
please provide the solution..!!...

hShekhar wrote:
1. scriptlet <%for loop %> good with countsCan also be done with c:forEach. There is absolutely no need to prefer scriptlets above the c:forEach.
2.c tag <c:foreach></c:foreach> good with arrays nd arraylistsAlso with counts and collections of DTO's.
3 logic iterate tag <logic:iterate></logic:iterate> good with arraylist with specific data (like VOs)This is not a JSP/JSTL tag. It is an Apache Struts tag. That same way I can also suggest another tags like h:dataTable, t:dataList, ui:repeat, etcetera. And the c:forEach can just also handle collections of DTO's.
Summarized: your answer makes not much sense.

I am confused with the integration of WM with SD.

Hi Gurus,
   I am confused with th e integration of WM with SD,
   Can anybody tell me what is the steps (T-Code) for picking the material & delivary to customer.
   And also send me few important transactions to check setttings related to SD & WM.

Hi,
I am confused with th e integration of WM with SD,
Integration of WM with SD is like if you are working with deliveries then SD integration will comes into picture.
Can anybody tell me what is the steps (T-Code) for picking the material & delivary to customer.
Steps are like create sales order then with ref to sales order create outbound delivery then with ref to outbound delivery create Transfer order for picking material from the warehouse.
Confirm the transfer order then check the stock overview of the material in the warehouse.
Transaction codes
VA01-sales order creation
VL01N-outbound delivery creation
LT03-create transfer order
LT12-confirm transfer order
MMBE-Stock overview
And also send me few important transactions to check setttings related to SD & WM.
You can check the above mentioned transaction for testing.

Confused with the WP Enrollment Process

Hi team,
I'm studing the WP MDM documents from
http://technet.microsoft.com/en-us/library/dn499787.aspx and faced some questions really need your help.
I can get the Dicovery response from the service in current and I set the <AuthPolicy> to Federated and the <AuthenticationServiceUrl> to a
https://xxxxxx page(that me say it login.aspx) with the appru & login_hint parameters. My questions are:
1) Should I verify the user/password in the login.aspx then redirect to a redirect page(let me say it redirect.aspx) with POST methd action of appid and the token value(wresult) after username/password verify sucess?
2) The document said that wresult: "The security token value is the base64-encoded string "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd#base64binary"
contained in the <wsse:BinarySecurityToken> EncodingType attribute". How can I get the <wsse:BinarySecurityToken> EncodingType attribute in Login.aspx(If I'm correct in Q1)? Or maybe should I encode "Any
token string generated from my server to identify this user" and put into wresult, and this encoded string be used in the MS-XCEP/MS-WSTEP requests automatically after that?
3) Will the WP devices triger the MS-XCEP GetPolicies request and MS-WSTEP RequestSecurityToken request in redirect.aspx's post action?
Great thanks for your patience and help!
BR/Kenn

Well...still no one commented here... I already had some progress, I'd like to share my understanding here to whom maybe also newbie in this area.
Q1 & Q2: Yes, acturally there is a step in Windows 8 MDM document mentioned it. It called this step as "Security Token Service" step. I guess you can verify your client base on username/password or whatever you want in this STS step and returen
a token to mobile/tablet device.
Q3,Yes, the MDM client in mobile/tablet device will triger the MS-XCEP GetPolicies request and MS-WSTEP RequestSecurityToken request in the Web Auth Page(redirect.aspx) post action.
So, we should have two Token services in the MDM solution in general.
1. Security Token Service: used to verify your user and return a security token.
2. The MS-WSTEP security token service: which mentioned in WP MDM document, will used in enrollment step.
BR/Kenn

Confused with the whole Pearsonvue and Certview

I can never get the whole login thing straight with the whole Certview and Pearsonvue.
I have an account with Pearsonvue (submitted my Prometric ID, approved etc) that I was able to login to view the certifications I have taken, etc at one time. Now, I can't even login. I remembered vaguely able to login to Certview using the same email account that I used with Pearsonvue. Now, Certview can't even find my account using that email search link (https://profile.oracle.com/jsp/reg/LostUsername.jsp).
What the heck is going on? Which ones should I be using? And what is the function of either site?

apex_disco wrote:
I can never get the whole login thing straight with the whole Certview and Pearsonvue.
I have an account with Pearsonvue (submitted my Prometric ID, approved etc) that I was able to login to view the certifications I have taken, etc at one time. Now, I can't even login. I remembered vaguely able to login to Certview using the same email account that I used with Pearsonvue. Now, Certview can't even find my account using that email search link (https://profile.oracle.com/jsp/reg/LostUsername.jsp).
What the heck is going on? Which ones should I be using? And what is the function of either site?I hope the folowing helps. Others may describe it better.
Pearson VUE tracks exams you have taken with Pearson VUE. Just the Exams. Pearson VUE are responbile for exam scheduling, taking, cancelling rescheduleing. Their role is to deliver the exams set by Oracle (and other Instutitions ywho offer exams) through their exam center network. Pearson VUe will say nothing about certification Status
Prior to September 2009 Oracle Exams were delivered by Prometric, where you could view similar hings Pearson view (though only 10 months are kept online); and of course only exams delivered by Prometric.
Certview is a front end system to the records Oracle maintains about an exam and what certifications have been awarded as a result of taking those exams and when they have been shipped. Records are held regards of whether Pearson Vue or Prometric delivered the exam.
You should find you oracle SSO gives you access to Certview if you have previously registered with it, unless you have acquired 2 oracle sso's. Your SSO is working as you seem to have access to forums. ( The key thing with Certview is your Oracle Testing Id. Hopeflly you do not have 2 or more of those).
I hope this helps a little, good luck with regaining your accounts ...
bigdelboy.

My Experiences With The A Series NW-A867

Having owned this Walkman for about one month, I thought it may be helpful to share my experiences with it. Earlier, I questioned this particular model on this post here: viewtopic.php?f=34&t=12708
First, I receive very little software support for this model at all. x-app will not install on my non-Japanese Windows 7. Due to this, I have no ability to create playlists to transfer to my Walkman. Due to one neat feature of this Walkman I will describe below, it turns out that this is a minor inconvenience for me. I also downloaded the Content Transfer application from Sony of Japan's website. This utility does install and work on my version of Windows 7. It's more of a convenience app though. It does offer the ability to check for firmware updates for my Walkman. This makes the utility worthwhile.
I mentioned above the inability to create my own playlists for my Walkman. The Sensme feature makes up for this (to some extent) by creating random channels of my library I can select. The first channel of this feature picks songs based on the current time of day. For this reason, it is important to set the date and time of the Walkman. The random channel feature has not played a repeat song for me yet in all the time I have listened to my Walkman. I currently have 6,605 MP3 files stored with 5.61GB free, so I have a decent sized library. The Sensme random channel is nice, but it is not perfect. The 'Picks of The Day' channel usually plays moderate to up-tempo songs. This channel is featured from 10AM to 4PM every day. However, for some strange reason, Miles Davis' Flamenco Sketches from his Kind of Blue CD was chosen to be played on this channel. This song did not fit in with the mix at the time at all, so I'm not sure why it was selected. Other than this incident, the random channel feature plays songs of a similar tempo. It does appear that genre is ignored, so it's not unusual to have any type of song played in a mix.
I usually have the song shuffle feature turned on unless I am listening to a complete CD. This allows me to select a specific genre of music and hear a mix of only that genre. I can also select a specific artist to hear a mix of only that artist, and so on.
The video feature I do not use at all, so I cannot comment on it.
One complaint about this Walkman is the ear buds. These are constantly falling out of one ear. Also, the ear buds must be inserted fully into your ears to hear a full sound. If they are not pushed into your ear firmly, you will hear a sound lacking bass. I have to push the ear buds into my ear every so often, because they come out on their own. Any headphones will work with this Walkman, but for the built-in noise canceling feature, you must use the supplied headphones. Sony does not appear to sell headphones separately that are compatible with this noise canceling feature.
This Walkman does not appear to be an MPT compatible device at all. It appears to work only as a UMS device. At least if there is a way to configure it as an MPT device, I have found no way to do it. The difference between the two here is that some features are not available via Windows Media Player through Windows (such as playlist creation and transfer).
So far, I am impressed with this Walkman. I see nothing else on the market that compares to it feature for feature, size and storage capacity.

Thank you for your post and detailed observations which I'm sure will be very useful to anyone contemplating purchase of NW-A867.

Scan Rate - Sample Rate confusion with the E-Series

Similar Messages

Maybe you are looking for