Scan Save to File error

When scanning to file, I get this error message: an error occurred saving the images to the chosen location. Please make sure you have write permission in the chosen file location. Error 8, [ (2 106,0) ]. Have installed the latest drivers; set sharing to everyone on destination folder. Help please.

Hello neejue,
Welcome to the HP Forums.
I see that you are having an issue with saving you scans.
So I can better assist you, please respond with which Operating System you are running as well as the exact printer model number.
Which Windows Operating System am I running?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
How Do I Find My Model Number?
Write me back when you have time and I will be happy to help.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Similar Messages

Keep getting Cannot save library file error -50 message on my PC

I keep getting "cannot save library file error -50 when I open up iTunes on my PC
Won't download music purchased on iPhone4 to iTunes in my PC

Same issue here. Running Windows Vista Home Premium Edition and newest version of iTunes. Normally happens when I am ripping a CD into iTunes and by chance multi task or the screen saver kicks in.
What ***** is if you walk away while ripping a CD(because it takes 3 times as long in iTunes vs any other ripper), and it will halt your ripping until you click "ok". I have not tried the "dont tell me again" check box just in case it is a problem I need to know about. This happened about 2 or 3 days after upgrading to Vista and I got an empty library the next time I opened the library. Somehow it got corrupted. Luckily I back up the xml file and just restored that one file from last back up.
(off subject but also getting the maxed our processor still in the newest version for Windows Vista. Wish they would fix that!)

"couldn't save media file" error when saving

I'm using Keynote 2.0.2 and for some reason, it won't let me save my presentation when it includes a 3.3Gb quicktime .mov file.
The presentation runs perfectly on my laptop, but when I save, the spinning ball appears and then I get this:
"The following errors occurred while trying to save this document:
Couldn't save media file - week3edit.mov"
This is driving me nuts, especially as I can insert exactly the same .mov file into a PowerPoint presentation and have it save no problem!
What could be causing this? Thanks in advance for any suggestions!
Barry

Use only numbers or letters in the file name. I've
seen failures in files that use even simple
punctuation. Cynthia's sound.mov should be
cynthias_sound.mov.
The other issue could be "protected" files. You can't
share iTunes Music Store files. If the file extension
is .m4p the file is protected.
These are .mp4 files that I converted. No copyright issues. And there is a space in the file name, but there are in all the other file names as well.
Weird, huh?

Webgui - save local file error

Hi,
I have a problem with the "save local file" (Excel) in the fictional MSS mentioned in webgui.
In particular I set tcode fpb_launchpad_cust Application Cate as URL that invokes a service (SICF) custom, which within a custom tcode. to customize the display and leave intact the standard webgui.
The log of the local JVM tells me:
loading: class Query.class not found.
java.lang.ClassNotFoundException: Query.class
sun.plugin2.applet.Applet2ClassLoader.findClass at (Unknown Source)
at java.lang.ClassLoader.loadClass (Unknown Source)
at java.lang.ClassLoader.loadClass (Unknown Source)
sun.plugin2.applet.Plugin2ClassLoader.loadCode at (Unknown Source)
sun.plugin2.applet.Plugin2Manager.createApplet at (Unknown Source)
sun.plugin2.applet.Plugin2Manager AppletExecutionRunnable.run at $
(Unknown Source)
at java.lang.Thread.run (Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed:
http://xxxxxxxxxxxxx:8001/sap/public/bc/its/mimes/webgui/sl/applets/Query/class.class
sun.plugin2.applet.Applet2ClassLoader.getBytes at (Unknown Source)
sun.plugin2.applet.Applet2ClassLoader.access at $ 000 (Unknown Source)
sun.plugin2.applet.Applet2ClassLoader at $ 1.run (Unknown Source)
at java.security.AccessController.doPrivileged (Native Method)
... 7 more
Exception: java.lang.ClassNotFoundException: Query.class
The path
"http://xxxxxxxxxxxxx:8001/sap/public/bc/its/mimes/webgui/sl/applets/Query/class.class"
in SICF doesn't exist.
Can you help me?
I installed the correct notes for the "truncate columns" 1317116
when printing the same functionality described above in pdf. Before
everything worked.
I installed notes to correct columns truncate 1317116
to print the same view in pdf. Before everything worked.
Now I tried to deimplement the notes but the problem remainsl.
SAPKB70017
Kernel release 700 - pl 200
Internet Explorer 7
JVM 1.6.0.20 (WITH JVM 1.6.0.5 is OK)
Can you help me?
Regards,
Diego Garofalo.

Hi Diego,
First you should implement SAP note 742197 to have a JAR file with a valid certificate.
Once you have implement this note then you need to republish the WEBGUI and the IAC internet services via SE80. This [Wiki|http://wiki.sdn.sap.com/wiki/x/kmE] should help you in this process.
Finally, invalidate mimes in SITSPMON and clear IE cache.
What is the result of a new test?
BTW, the Query.class is inside the WS.JAR file.
I hope this helps.
Best regards,
Cristiano

ITunes "cannot save library file" error in Vista

I just began ripping my latest pile of cd's into iTunes on my new Vista Media Center PC. Occasionally I get the popup "The iTunes library file cannot be saved. You do not have enough access privileges for thei operation" I checked and double checked the security on all of the iTunes files and folders, and not only do I (the system administrator), but also SYSTEM and Everyone have full access to the folder and files. My library is in C:\Users\Jerry\Music\iTunes\ , which is the default installation directory selected by iTunes. I have almost 11,000 songs, and I have already completely rebuilt the library in this version of iTunes as a means to try to resolve this problem. I am on iTunes 7.2.0.16 , everything on the PC is up to date, and I see nothing that makes this error seem correct. Has anyone else seen this, and do you have a fix? What are the implications of NOT saving the file? Thanks, Jerry

Same issue here. Running Windows Vista Home Premium Edition and newest version of iTunes. Normally happens when I am ripping a CD into iTunes and by chance multi task or the screen saver kicks in.
What ***** is if you walk away while ripping a CD(because it takes 3 times as long in iTunes vs any other ripper), and it will halt your ripping until you click "ok". I have not tried the "dont tell me again" check box just in case it is a problem I need to know about. This happened about 2 or 3 days after upgrading to Vista and I got an empty library the next time I opened the library. Somehow it got corrupted. Luckily I back up the xml file and just restored that one file from last back up.
(off subject but also getting the maxed our processor still in the newest version for Windows Vista. Wish they would fix that!)

Can't save a file; error message says file couldn't be opened

Using Pages '09 ver. 4.3 and OSX 10.8.4
When I try to save a new document in pages, I get an error message that says "the file 'xxxx.pages-tef" couldn't be opened.
How can I fix this so that I can start saving files again?

Pages 5.2 Mac OSX 10.9.2
Start Pages app
Create a blank document
File > Save or <Command>+S
Select Mac Device and find your user folder or favorite, Desktop (not iCloud)
Error: the file "Untitled.pages" couldn't be opened!?!
Repeat giving the document a different name and it works
Since when do we write error messages with "n't"?
Usually a well written error message offers a suggestion as to what you might do about it?
Since it says opened and I clicked on Save, there is a bug in there somewhere.
All I was trying to do today was copy and paste some text from a website into numbers spreadsheet
Both Edit > Paste options but the text in one cell so I tried to save it as a text file first to try and import the data
Text Edit does not have a text only export format so before loading Terminal and starting vi or emacs, I tried pages. I'll go try XCode's editor or my Windows 7 vm with notepad and openoffice
I miss the old Pages with the Appleworks importer, this one needs more Quality Assurance Testing IMHO
WWSJD "What Would Steve Jobs do?"

PSB Save, 2gb file error

Hi all,
I'm on PS CC, trying to save a PSB file (360"x360"). I know that PSD won't work with something this size, which is why i'm trying to save as PSB. I've purged, converted to/from 8/16 bit, flattened and everything, but every time I save, I get the "larger than 2gb error". Am I doing something wrong? Is there an issue/formatting thing i'm not aware of?
Trying to get this thing to print by EOD, so any help would be greatly appreciated.
Michael

It is possible that the hard Drive is formatted using the FAT format which has a limit of about 2 GB. So this will all depend on what OS you have and it's format.
But all I can do for now is guess.

Save XML File Error

I was trying to replace a Node in an XML file (see attached VI - LV 2010), but for some reason the Load or Save XML VI's are changing the format of the XML Header (only by a couple of \n characters, but enough for the application reading the XML file to say it is corrupt). In the Load XML VI I have left all the Inputs at their default values (ie. Preserve Whitespace) so why is the file being modified?
What the original file header contents look like.....
<?xml version="1.0" encoding="iso8859-1" standalone="no" ?>
<METRONFile Type="Record" Version="2.0.1">
<Application Name="Ansur" Version="2.9.4">
What the Header looks like after using the LabVIEW Load/Save XML VI's.
<?xml version="1.0" encoding="iso8859-1" standalone="no" ?><METRONFile Type="Record" Version="2.0.1">
<Application Name="Ansur" Version="2.9.4">
Chris
Attachments:
XML Replace Node Value.vi ‏16 KB

Believe me I have tried all possible variations of the inputs to the NI_XML.lvlib:Load XML File.vi, none of them make a difference. Also the Block Diagram of this VI doesn't help much since it is just a couple of Property and Invoke Nodes so nothing to debug really.
I have attached the XML file that we are working with if you want to experiment - thanks
Note: I had to change the extension of the attached file from *.mtr to *.txt since the website says it is not a valid extension for an attachment.
Chris
Attachments:
0350E141014545182220110131_new.txt ‏11 KB

Save XML file error permission

Hi everyone,
I read a XML file, edit it and save again:
                var filePath:String = File.applicationDirectory.resolvePath("alerts.xml").nativePath;
                var file:File = new File(filePath);
               var fs:FileStream = new FileStream();
                fs.open(file, FileMode.READ);
                fs.addEventListener(IOErrorEvent.IO_ERROR, editsettings_IOError);
                var xml:XML = XML(fs.readUTFBytes(fs.bytesAvailable));
                fs.close();
                fs.open(file, FileMode.WRITE);
                xml[key] = value;
                xml.toXMLString();
                fs.writeUTFBytes(xml);
                fs.close();
When I´m in debug mode, everything is fine, but when I generate a Executable installer (native installer), it doesn´t work.
I don´t have permission.
Any solution?

Hello,
That's explicitely marked in documentation to not use "applicationDirectory" for write (updates/modification/deletion/etc), e.g.:
The File class includes static properties that let you reference commonly used directory locations. These static properties include:
File.applicationStorageDirectory—a storage directory unique to each installed AIR application
File.applicationDirectory—the read-only directory where the application is installed (along with any installed assets)
and later on the same page:
Modifying content in the application directory is a bad practice, for security reasons, and is blocked by the operating system on some platforms. If you want to store application-specific data, consider using the application storage directory (File.applicationStorageDirectory).
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/filesystem/File.h tml#applicationDirectory
So as pointed in docs you could use applicationStorageDirectory as location where you application-specific content is to be stored/created/updated/written/etc.
(otherwise everything works fine when running local ADT/debug session - but it could fail at any time when deployed)
hth,
kind regards,
Peter

I have Maverick 10.9.1 installed I scanned a photo on my HA D 110 series but it won't let me print or save it: An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only.

I have Maverick 10.9.1 installed I scanned a photo on my HP D 110 series but it won't let me print or save it: An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only.

Read the user manual that came w/the scanner and/or contact HP Support.
http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
A scanner driver you may wish to consider: VueScan Scanner Software

Help!! - "The HP Scan Application was unable to save the file to the specified location."

New OJ6830, latest HP software installed on Win7 64 bit.
HP Scan scans and displays the scanned pages. But, when I try to save the file as a pdf or tiff, I get the following error message:
"The HP Scan Application was unable to save the file to the specified location."
BTW, I have tried running the app as Administrator and have disabled my antivirus software.
Why won't the HP scan app save the file? Has anyone else seen this error message?
Is there anything else I can do, or this this just a major bug in HP scan software?

Mike,
One Idea:
Make sure you have "San Preview" checked else the software will not accept "specified location".
Reference:
Save Scan to Specified Location
Click the Kudos Thumbs-Up to say Thank You!
And...Click Accept as Solution when my Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

Scanner not available, OR scan will not save to file

Hello, HP M1212nf, using HP Director/HP Scan 1.1, on an iMac running OS 10.6.8.
On the control panel, the Ready light is on, the Attention light is off, and the Toner light is blinking.
I try to scan a document, but get "the scanner is not available" message. USB connections are good...
Occasionally, it does scan successfully. But then when I try to save it as a file, all steps work beautifully -- PDF/JPEG/etc, name file, choose destination -- but the supposedly saved file is nowhere to be found. (Spotlight doesn't see it, and it's certainly not in the destination I chose.)
What's going on, and how do I fix it?!
Thanks in advance for help!
Ch.S.

> Maybe if you go for another walk to the mall and pick up another sack of potatoes, the printer will start working
> again, if you get a bag of carrots too, it might continue working.
I have enough potatoes and carrots, thanks... ;-)
Thanks ever so much for your perseverance in helping me with this!!!
> Try and print a hardware self test on the printer to find out if it is a hardware or software issue.
> Printing Information Pages.
The config pages print beautifully, although the toner light (yellow) is flashing.
> When you get this error message, are you still able to print?
> Is there any lights flashing on the printer before trying to scan?
The scanning problems (not being able to save to file, and sometimes, “scanner not available”) are not affecting printing. The print function works beautifully, even though the machine seems to think its toner level is low (flashing yellow light).
> Make sure the printer is connected directly to a wall outlet and the USB cable is connected directly to the
> computer.
> The USB cable shouldn't be longer then 6 feet. Do you have another USB cable to try?
Printer was connected through a power bar. I changed it, straight into wall socket.
I do have another USB cable, have replaced the one I was using with the other one.
Same problem persists: “save as PDF” refuses to work: the file seems to disappear, and Spotlight doesn’t find it anywhere.
The only work-around I have found is to choose “e-mail” instead— this puts the PDF into an e-mail, from where I can move it to where I need it. This solves the problem, sort of, but it’s a tedious long way around.
> Reset Printing System:
> Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking > the plus (+) symbol.
> 1. Click the Apple icon (  ), and then click System Preferences.
> 2. Click Print & Scan.
It’s called Print and Fax on mine.
> 3. Right-click (or Ctrl +click) in the left panel and then click Reset printing system.
> 4. Click OK to confirm the reset.
> 5. Type the correct Name and Password.
> 6.   Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected.
> Then add the printer from the same window.
> Click the + sign, select the printer from the list, click on the add button.
OK, all done. Closing SysPrefs and trying again.
Behaviour is largely the same. Two issues:
1- Now and then I get “scanner not available” message. Turning off the printer and quitting HP Director, then turning printer back on and restarting HP Director, usually gets past this “unavailable” issue— it scans successfully. Sometimes it takes more than one off/on quit/restart cycle to banish the “unavailable" message. This is not a faulty cable or connection issue. What the *$%^%# is it?!
2- scanned file won’t save— BUT here’s some progress: if I save under a different name, like “test”, there’s no problem. If I save under the name I want, which for the current page is “Arrival Va 1/2”, it disappears instead of saving. Could my problem be this simple: In the "save as file" dialogue box, I’m not allowed to use a symbol like “/“ as part of the file name?????
If that’s it, I can work around it, just saving the file and changing the name afterward.
I hate to think, after all this hair-pulling (and I don’t have that much to start with), it might be as simple as that!!
But it seems to be: saving as “Arrival Va 1/2” doesn't work, but saving as “Arrival Va 1 2” does.
Even if that’s it, I’d still much appreciate your thoughts on the “not available” messages...
Again, a million and a half thanks!!

"The HP scan application was unable to save the file to the specified location. "

I can copy and print from my computer but when I try to save the scan I get an error message saying the HP app was unable to save the file to the specified location. I reloaded the cd and that did not help.

Hello jerlip, Welcome to the HP Forums. I see that you are having an issue when attempting to save a scan. I suggest that we try running the HP Print and Scan Doctor. If you see any error codes or messages, please let me know what they are. Write me back when you have time and I will be happy to research other options if needed. Cheers,

Why do I get a program error when trying to save a file

I've loaded and reinstalled photoshop elements 3 times. I can not save any files. all i get is cannot save file do to program error message'
this is a brand new product with a program error and they want me to pay them to fix there problem. it ain't right.

which version of Photoshop Elements are you using? Also, do tell us about the flavour of Operating System you are using and the format in which you are trying to save your file.
You can also try saving your file to a different location( e.g. desktop) to check if your computer has any permission issues

File Error: Unknown File, Cannot Save

I hope this is only a matter of healthy file management, but I'm quite confused and hope someone can clear this up into something of a simple science. On the otherhand, could this be a LIMITATION of FCP?
-Have been editing a sequence from a larger film on a second computer. That sequence has been worked on over several days and saved (of course). However, upon saving last night, was an error message: "File error: Unknown File" and the project could not be saved.
-This is quite possibly due to the fact that both the media and project files have been copied over the network to the first computer where the master project is being assembled.
-HOWEVER, no media files claimed to be offline, everything was editable AND the FILE WOULD NOT SAVE through multiple attempts
-ALSO, the other open project WOULD NOT SAVE either (its files where never moved or otherwise tampered with. It was a small and entirely local operation).
-SAVING was finally accomplished ONLY by saving the project file to the LOCAL HD rather than the EXTERNAL DRIVE where the MEDIA and PROJECT FILES originated and had been previously saved to.
-All other attempts to save to the EXTERNAL were met with the message "FILE ERROR: UNKNOWN FILE" This compromised saving process resulted in the loss of all work, edits, etc. on the LESSER and EXCLUSIVELY local project.
-AFTER saving to the LOCAL HD, the project COULD BE once again saved to the EXTERNAL HD. This flow seemed very strange to me.
-Has anyone else encountered this problem, and what can I correct in my processes to avoid this.
--*Also, the First computer encountered the same problems at the same time, after both EDITING & SAVING had taken place since the last FILE COPYING. Again, work was lost.
Thanks for any help you can offer.
G5 Dual 2 GHz PowerPC Mac OS X (10.4.5) 1.5 GB ram

Do people search this forum at all?!?
Check your project for CMYK files.
Search this forum for General Error.
This was discussed about 90 minutes ago.

Scan Save to File error

Similar Messages

Maybe you are looking for