Scan to e-mail Error

I have had this printer for almost a year and the scan to e-mail function has always worked properly. Yet today as I attempt to scan a document a message appears saying "unable to connect to web services. Confirm internet access and try again." I unplugged the router and the computer to no avail. I reset the connection settings and I'm still getting the same message. The wireless network test passed on all counts and the signal quality is "excellent". I am at a loss. I have tried several solutions I have found online yet nothing seems to work. Any help would be greatly appreciated.

Forgot to mention. I am running windows 7.

Similar Messages

HP 8600 scan to yahoo mail as .pdf gives error but opens in gmail outlook

I have scan opening problem with HP 8600. I can open any .pdf with no problem. I have Win 7 and current Adobe. But anything scanned by HP 8600 to yahoo mail gives...it is either not a supported file type or because the file has been damaged...
When I scan to both gmail and yahoo, gmail opens with no problem but the yahoo mail gives the error message above. I have tried on numberous PCs and with at least 3 different yahoo users. To make this even more puzzling, I can forward the same email with attachment from gmail to yahoo and the attachment will now open, but the scan sent directly to yahoo mail still will not open.. looking for answers, not work arounds. I have already reinstall the printer.
I can also forward the yahoo mail .pdf attachment that will not open to gmail and it opens!

Hi d4ny_79,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
Sorry to hear that you are having issue with the "Scan to E-mail" feature. As for the link that was not working for you, here is an updated link to try for the HP Print and Scan Doctor. I would suggest you run the Doctor first and if you are still having issues, please let me know and I will be happy to offer more assistance.
Sorry for the inconvenience.
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Configuring "Scan To E-mail" on HP Officejet Pro 8600 Plus N911g

This is the same issue reported by several other users in this forum to which no solution has been provided.
I have been unsuccessful in setting up the scan to e-mail option for a HP Officejet Pro 8600 Plus N911g purchased on August 12th 2012 and using the firmware CLP1CN1150CR.
I am trying to do this through the Embedded Web Server interface to the printer from an iMac running Mac OS X 10.6.8 and HP Utility 5.8.0. More specifically the page under "Scan -> Scan to E-mail -> Outgoing E-mail Profiles".
I have tried 2 different SMTP outgoing servers, each of which works well to send e-mail from the computer: Apple iCloud e-mail service (formerly known as Mobile Me, formerly known as .Mac) and AT&T Net e-mail service. I verified that the server name, port number and authentication login/password values were all correct.
When scan to e-mail is used from the printer, I get an error message: Cannot connect to server. Check server name and address.
When tested from the computer during the setup of an outgoing e-mail profile, I get an error message: The device could not send the test e-mail message. (EmailAccounts-timeout).
When I try to configure the page under "Settings -> E-mail Alerts -> E-mail Server" and use exactly the same values as the ones in the outgoing e-mail profile above, the Save and Test option fails with an error message: The device could not send the test e-mail message.
Interestingly enough, I am able to use the computer's e-mail client with the option Scan To Computer -> E-mail as PDF or E-mail as JPEG. With this option, the file is scanned and added as an attachment to a mail message from the Mail client under Mac OS X. When I press the Send button, the e-mail is sent successfully through the same SMTP server.
All the error messages seem to indicate that the printer's e-mail client software is unable to establish a connection to the SMTP server. However, it is not clear what configuration parameter is the one that could be causing the problem.
This question was solved.
View Solution.

After further research, I noticed that there are other possible default Simple Mail Transfer Protocol (SMTP) port values:
Port 25 is the standard SMTP port number.
Port 465 is the port number for SMTP over SSL, Secure SMTP (SSMTP).
Port 587 is the dedicated port number for a Mail Submission Agent (MSA) that uses a variant of the SMTP, as specified in RFC 6409, which requires that clients are authorized and authenticated to use the mail submission service.
I had been using port number 25 as this is the standard one. However, all tests were failing. Hence, I decided to try the tests with ports numbers 465 and 587.
Port number 465 failed with the same errors listed above. However, the tests passed with port number 587. After saving the successful configuration with port number 587, I tried the scan to e-mail option from the printer and it worked.
A mail submission agent (MSA) is a computer program or software agent that receives electronic mail messages from a mail user agent (MUA) and cooperates with a mail transfer agent (MTA) for delivery of the mail.
Historically in Internet mail, both MTA and MSA functions use port number 25. However, many Internet Service Providers (ISPs) and enterprise or institutional networks restrict the ability to connect to remote MTAs on port 25.
With a dedicated port 587, it is always possible for users to connect to their domain to submit new mail. Availability of a MSA on port 587 enables nomadic users to continue to send mail via their preferred submission servers even from within others' networks. Using a specific submission server is a requirement when sender policies or signing practices are enforced.
I know that many users may find the technical details boring or confusing, but I just wanted to include some background to those who actually care about this level of detail. I also wanted to provide a possible solution to other users who are experiencing the same problem.
So, in a nutshell, if the Scan To E-mail option is not working for you using port number 25, then try one of the other SMTP port numbers listed above. If none of them work, check your mail provider for other possible outgoing server port numbers.

Officejet Pro 8500A Plus can't scan to e-mail

I have an Officejet Pro 8500A Plus and Windows 7 32-bit OS and using Outlook 2010. I'm trying to scan to e-mail and am having no luck. From the printer interface I choose SCAN --> COMPUTER --> (MyComputer) --> E-MAIL AS PDF. It performs the scan, but then on my computer, I get the following error:
"The HP Scan application is unable to open your e-mail application and/or cannot attach the scan to a new email. Please check your email configuration and try again."
I've checked the configuration in CONTROL PANEL --> DEFAULT PROGRAMS --> SET YOUR DEFAULT PROGRAMS. I made sure that I selected Microsoft Outlook and clicked Choose Defaults For This Program. I then selected all Extenstions and Protocols and still no luck.
Has anyone else had this problem and found a solution? Thanks. You may be wondering why I don't just use the Scan to Email instead of scan to computer. Well, unless there's a way to import all 400+ contacts from my Outlook to the address book in the scanner, this is the fastest way for me to scan an item and send it as an e-mail to various people.
Thanks.

How do I scan a document and then be able to email it to someone on my HP Officejet Pro 8500a Plus

"Unable to connect to web services" when trying to scan to e-mail on a HP Photosmart 7520

Hello - I used to be able to scan to e-mail with no problems and then all of a sudden I keep getting the "Unable to connect to Web Services" error message. I have checked my network connection and it is fine, I have turned off my router and unplugged my printer but still no luck. I have seen that this seems to be a common problem from others in this forum but I was hoping someone could help me figure this out.
I really need to be able to scan documents to my e-mail..... ughh... please help!
Thanks,

I am having the same issue. Please help.

OfficeJet 6700 - feeder not working with scan to e-mail

I'm having a problem with scanning to e-mail.
I put the document in the feeder and use the app to scan to e-mail, but nothing happens.
It just says "scanning failed, try again or exit"
I have also tried to put it on the glass, but again nothing.
I can scan from my computer - here the feeder works...

HI now_what,
Welcome to the HP Support Forums. I gather that you are unable to use the scan to email feature of your Officejet 6700 printer.
To better assist you, would you please provide some further information:
What make/model/product number of HP printer do you have? How Do I Find My Model Number or Product Number?
How is the printer connected (USB cable, ethernet, or wireless)?
What operating system are you using on your computer? whatsmyos.com
If you are using a Windows-based operating system have you Tried the HP Print and Scan Doctor for Windows? If yes, what were the results?
Are you able to make a copy from the front panel of your printer?
Is the printer plugged directly into a wall outlet?
Do you have any other error messages? If yes, what does the error message say and where is it displayed (printer or computer)?
Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Cannot scan to e mail - Printer does not wake up - Web access issues

I own the HP 7520 AIO since a couple of months.
Everything was working fine untill 2 weeks ago
After a couple of hours , you cannot print anymore, you have to reset the network connection. Sometimes it works just by reseting the wireless , sometimes you have to go for a printer shutdown , plug out the cord (because you cannot power on again the printer by pressing the power button) and replug. I tried to configure again Wireless connection but I does not solve the issue .
In addition,when I'm trying to access to apps or to scan to e mail from the front panel, I'm getting an error message saying that it is impossible to connect to Web services.
I tried to reset the printer to factory but now it's worst I cannot configure e print anymore at all...
Scan to computer (to Windows) is working all the time (to Mac has never worked from the printer but work from the computer)
I did not change something to the home wireless (router or others) since I first configured the printer.
Could you please help me to solve these issues ?

Hi engte,
Welcome to the HP Support forums. I understand that you are unable to scan to email with your Photosmart 7520 printer and also you are unable to connect to web services.
To reconnect to web services please set a manual IP address and DNS servers. I have included a link to another post I did with the steps (including screen shots). It also sounds like the router may have had a firmware update so I’ve also included the Printer Does Not Maintain Wireless Connection document. There are several valid trouble shooting steps to follow if the manual IP doesn’t correct things.
Please let me know how it goes.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Cannot scan to E Mail

Error message 503 when trying to scan to E Mail, have tried turning on & off, restarting etc. worked fine last week???

Hi engte,
Welcome to the HP Support forums. I understand that you are unable to scan to email with your Photosmart 7520 printer and also you are unable to connect to web services.
To reconnect to web services please set a manual IP address and DNS servers. I have included a link to another post I did with the steps (including screen shots). It also sounds like the router may have had a firmware update so I’ve also included the Printer Does Not Maintain Wireless Connection document. There are several valid trouble shooting steps to follow if the manual IP doesn’t correct things.
Please let me know how it goes.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Scan to E-Mail isn't working

I have a Photosmart 7520 printer and have been using the scan to e-mail function successfully. For some reason, I'm now receiving an error message (Server Connection Error, unable to connected to Web Services). All other services (wireless printing, etc.) are working just fine. I followed the instructions contained elsewhere on this site (turning both the wireless router and printer off for 1 minute and then turning on the wireless router, then printer). But it still isn't working. Can you assist me please?

Hi @rlsrocker
Welcome to the HP Support Forums. I understand that you have encountered an issue when trying to use the scan to email feature of your Photosmart 7520 printer.
Please set a manual IP address and manual DNS servers for the printer. I have included a link toanother post that has the steps, including screen shots, on how to do this. Please do not worry that the screen shots are for the Photosmart 7510, the steps are the same.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct. Account name: "MacMail"

Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct. Account name: "MacMail"
What are the correct mail account settings and more importantly the correct DNS settings
Thank you for any help you may be able to provide
Cheers
Chris (iMac i7)

Do not delete the old account yet. sign up for an iCloud account if you haven't.
I understand .mac mail will still come through. Do not delete the old account yet.
You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
IMAP (Incoming Mail Server) information:
          •          Server name: imap.mail.me.com
          •          SSL Required: Yes
          •          Port: 993
          •          Username: [email protected] (use your @me.com address from your iCloud account)
          •          Password: Your iCloud password
SMTP (outgoing mail server) information:
          •          Server name: smtp.mail.me.com
          •          SSL Required: Yes
          •          Port: 587
          •          SMTP Authentication Required: Yes
          •          Username: [email protected] (use your @me.com address from your iCloud account)
          •          Password: Your iCloud password
Also, you must upgrade your password to meet the new criteria: 8 characters, including upper and lower case and numbers. If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message. Go to   http://appleid.apple.com         then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
Thanks to dpepper...
https://discussions.apple.com/thread/3867171?tstart=0

HP Officejet Pro 8500 A910 Scan to email failure Error Server Failure Try again Later message

HP Officejet Pro 8500 A910n ( CM758A ) Scan to email failure Error Server Failure Try again Later message
Ran HP Print & Scan Doctor - finds no problems. When sending a scanned document to the user email it has " Error Server Failure Try again Later " message . Can run test to the scanner without any errors. Tried to reset the printer - same result.
Any help would be much apreciated. AHuber

Hello there! Welcome to the forums @TheShadow42 ,
I read about the scan to email issue you are having and I will gladly try to help you! I would suggest checking your scan to email settings from the EWS, and perhaps run the scan to email wizard again. You should also see a scan and test option in the setup.
Here is a link to the User Manual, that has quite a bit of great info. Check out page 62 for the scan to email information.
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Restoring .dmg image from external to Mac HD in Disk Utility: "Unable to scan image (Input/output error)"

Hi guys,
So I've got a problem with restoring the image backup I did (using Disk Utility) of my 500GB HD on my MBP which was acting weird or maybe even crashed a few months ago. After creating the backup image and putting it on my external device, I installed Mavericks back to see if everything was alright (mainly the HD) and everything seems okay.
I did try restoring the backup image through disk utility before installing mavericks (thus erasing everything again on the HD) AND after. But nothing..
The whole process starts fine and then it starts scanning the image when after maybe a good 10-15min in I get a message that says that it was unable to scan the image. I tried verifying the disk(s), everything came out "OK". Also tried scanning it through Images > Scan image for Restore... with the same results.
While searching I've seen people getting messages like "Unable to scan filename.dmg (Invalid argument)" and "Unable to scan filename.dmg
(Internal error)" but none have (Input/output error)
The screen grab is below.
I also came across something about using terminal/commands but I'm not that savvy with it, especially considering that those there had issues with either mounting or trouble finding the image.
I've also tried moving the backup image to a different external device 2TB and also the desktop because I read it may have to do with the format of the externals or maybe free space. But THEN I would get a message saying
"The Finder can't complete the operation because some data in "Mac HD Backup.dmg" can't be read or written. Error code -36"
Fyi ALL my externals are HFS+/Journaled and the backup image format was compressed.
I REALLY don't know what to do next. Was it the wrong move to create a dmg image? Have I lost everything? Is there still a way out?
If anyone can help, THANKS!
2012 MacBook Pro, Mac OS X (10.9.3)

Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. You may have to leave the machine there for several days.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed.

File To Mail - Error in sender CC

Hi All,
I am trying out a File to mail scenario following the Blog /people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
I am getting the following error in the File Sender Comm Channel :
Mail: error occurred: com.sap.aii.af.mp.module.ModuleException caused by: com.sap.aii.messaging.srt.BubbleException: Failed to call the endpoint [null "null"]; nested exception caused by: java.io.IOException: no sender address specified
I could also see the payload is empty in the Receiver Mail CC
Now can anybody help getting me the mail ...
Thanks in advance

Hi Bhavesh,
I get a checkered flag in Moni ,
But the response has only SOAP header and Body with out payload , I Mail package is checked and base64 is selected ..
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">Party normalization: sender</Trace>
<Trace level="1" type="T">Sender scheme external = XIParty</Trace>
<Trace level="1" type="T">Sender agency external = http://sap.com/xi/XI</Trace>
<Trace level="1" type="T">Sender party external =</Trace>
<Trace level="1" type="T">Sender party normalized =</Trace>
<Trace level="1" type="T">Party normalization: receiver</Trace>
<Trace level="1" type="T">Receiver scheme external =</Trace>
<Trace level="1" type="T">Receiver agency external =</Trace>
<Trace level="1" type="T">Receiver party external =</Trace>
<Trace level="1" type="T">Receiver party normalized =</Trace>
<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
- 
<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
<Trace level="1" type="T">COMMIT is done by XMB !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- 
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="1" type="T">system-ID = XIL</Trace>
<Trace level="1" type="T">client = 002</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2006-09-14T09:48:04Z CET</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">Message-GUID = 1DC20B0043D611DBC937000D60D4EDB5</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
<Trace level="1" type="T">Queue name : XBTI0009</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTI0009</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="1" type="T">system-ID = XIL</Trace>
<Trace level="1" type="T">client = 002</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2006-09-14T09:48:04Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC">
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
- 
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
<Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
- 
<Trace level="1" type="T">number of receivers: 1</Trace>
<Trace level="1" type="T">Single-receiver split case</Trace>
<Trace level="1" type="T">Post-split internal queue name = XBTO3___0001</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Persisting single message for post-split handling</Trace>
<Trace level="1" type="T" />
<Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="1" type="T">system-ID = XIL</Trace>
<Trace level="1" type="T">client = 002</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2006-09-14T09:48:04Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
- <Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV">
<Trace level="1" type="T">Interface Mapping http://sap.com/xi/XI/Mail/30 GK_File2Mail_IM</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- <Trace level="1" type="B" name="PLSRV_OUTBOUND_BINDING">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
<Trace level="1" type="B" name="CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV" />
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- <Trace level="1" type="B" name="PLSRV_CALL_ADAPTER">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
- <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP" />
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Async processing completed OK.</Trace>
<Trace level="1" type="T">system-ID = XIL</Trace>
<Trace level="1" type="T">client = 002</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2006-09-14T09:48:05Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
</SAP:Trace>

File to Mail error

Hi,
I am doing file to mail scenario. I got an error
"failed to send mail: java.io.IOException: invalid content type for SOAP:
TEXT/HTML"..
How to solve.
regards,
Ansar.

Hi Bhavesh,
I done like that but still it is coming...
This is the process of Communication channel
2006-12-29 11:42:46 Success Mail: Receiver adapter entered with qos ExactlyOnce
2006-12-29 11:42:46 Success Mail: calling the adpter for processing
2006-12-29 11:42:46 Success Mail: call failed
2006-12-29 11:42:46 Success Mail: sending a delivery error ack ...
2006-12-29 11:42:46 Success Mail: sent a delivery error ack
2006-12-29 11:42:46 Error Mail: error occured: java.io.IOException: invalid content type for SOAP: TEXT/HTML
2006-12-29 11:42:46 Error Exception caught by adapter framework: Failed to call the endpoint
2006-12-29 11:42:46 Error Delivery of the message to the application using connection AFW failed, due to: Failed to call the endpoint.
2006-12-29 11:42:46 Success The message status set to WAIT.
2006-12-29 11:42:46 Success The asynchronous message was successfully scheduled to be delivered at Fri Dec 29 11:47:46 GMT+05:30 2006.
regards,
Ansar.

Workflow mailer error

Hi ,
I was getting the workflow mailer error from R12. I tried to start,but failed......after that I got a confirmation from my client that somebody changed a table, then I checked again and found Workflow mailer working fine....I didnt get what happened on this...
friends, If you have any idea on this, please share

Pl post details of OS, database and EBS versions. Has this mailer worked before ? If so, what changes has been made recently ? Pl also see these MOS Docs
How to Troubleshoot 'Validation failed' Errors when Starting the Mailer          (Doc ID 463354.1)
Unable To Start Workflow Notification Mailer          (Doc ID 418329.1)
How to Perform a Meaningful SMTP Telnet Test to Troubleshoot Java Mailer Issues          (Doc ID 753845.1)
Workflow Mailer Will Not Start Stays In Starting Status          (Doc ID 837893.1)
Unable To Connect To The Mail Account. Check The Host, User Name And Password          (Doc ID 1123684.1)
HTH
Srini

Scan to e-mail Error

Similar Messages

Maybe you are looking for