Scan to network folder will not work for Yosemite

Scan to network folder, which is supposed to allow the unit to scan and save to a shared directory on a remote computer, does not work in Yosemite, though it will work on Macs sporting earlier OS on same network.
HP personnel have indicated that HP does not support Apple Mavericks. One can only assume then that it will not work on Yosemite either
Yet these units are still being sold to be used with Apple OSX.
Please resolve HP's position. If these units will not function properly under Mavericks and Yosemite, please explicitly say so. The scan to network feature should not have anything to do with any OS issue, and it is much more likely that the issue is faulty HP firmware.
If these units are supposed to fully function under Mavericks and Yosemite, please provide substantive resolution of the many many problems users have experienced.
The Scan to Network feature is what makes using these units viable as scanners. The fact that this works poorly at best, and not at all on any recent Apple OS, is simple acceptable

IT IS OFFICIAL
HP Case Manager has indicated that HP is abandoning Scan to Network Folder starting with Yosemite as OS security constraints present issues with using its current transport.
Of course this took an hour of double talk and fiddling about before the admission was forthcoming...
Shall we count the days until that information actually shows up in the forums?

Similar Messages

"scan to network folder" suddently stopped working after many months of no issues

scan to network folder was working fine over a wireless network to a folder on my file server - for many months.
This weekend I noticed the printer said it was "updating".
I guess it must have done some kind of automated update or something because I did not initiate an update.
Suddenly scan to network folder fails to work.
When I try from the printer, it says cannot connect to \\computer\folder
When I test from the embedded web server on the printer "Connection Failed"
The folder is online. I can access it from another computer.
I have also tried setting up a second folder config using the IP address as \\x.x.x.x\folder(The first 3 sets of digits in the IP addresses are the same for printer and network server) I even tried setting up anoter account to authenticate to the file server with a simpler password for testing purposes to rule out typographical errors. I have tried bouncing the printer, the router, the network server and the wireless access point all to no avail. It looks like the printer is failing to find the network server anymore.Pity there is no "ping" option on the printer to test if it can even see the network server anymore. I can "scan to computer" to another computer on the wirless network.But I like the convenience of being able to scan to a defined network folder whether my other computer is turned on or not. Does anyone know if HP pushed out a printer update this week or something?Just wondering why it suddenly changed.

Download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

I purchased Adobe photoshop elements II and Adobe premiere elements II. They are both on one disc. My computer crasded and I had to reload Windows. I only have one serial number and it only works with photoshop II. The same serial number will not work for

I purchased Adobe photoshop elements II and Adobe premiere elements II. They are both on one disc. My computer crasded and I had to reload Windows. I only have one serial number and it only works with photoshop II. The same serial number will not work for Premiere. I dont have any other serial numbers. What do I do???

Static_Unit
I am getting a bit concerned about what is happening in your situation. Yesterday you posted your question in at least two different forums, one of them being here in the Premiere Elements Forum.
Don't Have Serial Number for Premiere, Only Photoshop?
Wherever you posted, the reply was to contact Adobe via its Adobe Chat. It is the only one who can sort out this matter for you.
In the thread cited above I offered to help you with the difficulties that you were having visualizing the Adobe Chat in its web page. I was waiting for your follow up on that in the above thread. Instead, I find your same question in a new Adobe Premiere Elements Forum thread this afternoon with no refer the prior threads or prior recommendations given you.
I will also mention again...when you buy the Photoshop Elements and Premiere Elements bundled in one packaging and with installation files for each on the same installation disc, each program has its own serial number. The Photoshop Elements serial number does not work for Premiere Elements and vice versa. The serial numbers are on labels on a box which houses the installation disc envelope(s). So, if you purchased both programs and found the Photoshop Elements serial number, then the Premiere Elements serial number should be in a label right underneath the label with the serial number for Photoshop Elements. I recall writing this in your yesterday's thread on this matter.
The moderator will no doubt be along shortly to close or delete this thread. So, just in case, please bookmark your yesterday's thread cited above so that we can continue this communication which is trying to help you.
Thanks.
ATR

I have a licensed copy of Adobe Acrobat X Pro for Windows. I recently switched over to MAC OS and would like to move my Adobe X Pro over but the CD will not work for Mac OS? Can anyone assist me with this conversion? Best, James.

I have a licensed copy of Adobe Acrobat X Pro for Windows. I recently switched over to MAC OS and would like to move my Adobe X Pro over but the CD will not work for Mac OS? Can anyone assist me with this conversion?
Best,
James.

you cannot use your pc license to install on a mac. you would need a separate license (and serial number) for that.
adobe allows platform swaps, but only with the latest (xi) version, Order product | Platform, language swap
your option to use acrobat on a mac are to upgrade to acrobat pro xi and change platforms, use a windows emulator (parallels/boot camp etc) on your mac or swap with a third party.

I got a replacment iphone 4 but it will not work for me please help??

i got a replacment iphone 4 but it will not work for me it has been charging for nearly 4 hours now but the screen still has the battery in the red and also will not connect to itunes is there something im doing wrong??

You'll have to get it serviced or replaced again, contact Apple, usually a replaced device is under warranty for 90 days as well.
Apple - Support - Service Answer Center

Reset password will not work for apple store

Reset password will not work for apple store?

Welcome to the Apple Community.
Where have you reset your password.

My apple id will not work for my icloud account

my apple id will not work for my icloud account I am running windows 7 I have reinstalled ICloud for PC several times but do not know where to set up an icloud account

If you are getting a message that says you have a valid Apple ID but not an iCloud ID, it's because you are trying to create an iCloud account on a PC. You can only create iCloud account on an iOS device (iPhone, iPad or iPod Touch) running iOS 5 or higher, or on a Mac running OS X Lion (10.7.5) or higher. After creating your account on one of these devices you will then be able to sign into the account using this ID on your PC.

After the update my earbuds will not work for my music BUT will work fine for phone conversations

After the update my earbud will not work for music BUT will work for phone conversations

this might sound dumb but how do i do that because that is probably the problem

My iPhoto will not work with Yosemite, and it says that it was purchased under a different account, but that's not the case. Any ideas why I cannot update iPhoto?

my iPhoto will not work with Yosemite, and it says that it was purchased under a different account, but that's not the case. Any ideas why I cannot update iPhoto?

How did you buy iPhoto? Did it come preinstalled on your computer with Lion or later, or did it come with Snowleopard on system installer disks?
Which version of iPhoto?
If you have a version of iPhoto '11 and it is showing on the Purchased tab of the App Store, with your Apple ID, then delete iPhoto from the Applications folder (don't empty the Trash) and download iPhoto again from the Purchased tab.
If that does not work, contact The App Store Support from the Quick Links on the AppStore main page.
Only apple Support can fix problems with apple ID.

HT1338 motion 4 will not work after yosemite upgrade

motion 4 will not work after yosemite upgrade

To be honest I do not use motion or any other compositing app so i do not miss it personally. However the new Motion is not that expensive, around $60 i think. Still, I understand your frustration.
I am afraid the more the OS is updated the less compatible certain applications will become.
Good Luck
h

HP OfficeJet 8620 Scan to Network Folder No Longer Works after Mac OS X 10.10Yosemite Upgrade

My scan to network folder function no longer works. When I look into it, I get an error message when I test the Network Folder setup saying, "Incorrect credentials. Check your username/password and try again."
The username and password are unchanged. I just bought this AIO and I kinda need this function to work. I hope that 10.10 didn't just disable this function.

I have followed your recomendation step by step but did not work. The message "Incorrect credentials. Check your username/password and try again." keeps showing once I test the credentials.
After several hours of work this is very upsetting. What other option are to set up using Mac Book Pro and Yosemithe?
Thanks
LN

I participated in my company's video conference last week, and now the camera on my Macbook Air will not work for facetime or skype. Help!!

I participated in video conference with my company last week, and now I cannot use Facetime or Skype because the camera is not working? Help, I cannot find the button to free up my camera!!

If you installed some kind of software to take part in the conference, remove it.
Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and except as stated in this comment, I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmymac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button. The uninstaller might also be accessed by clicking the Customize button, if there is one.
Back up all data before making any changes.
You will generally have to restart the computer in order to complete an uninstallation. Until you do that, there may be no effect, or unpredictable effects.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" such as "AppCleaner" and the like that purport to remove software.

Form Designed in LiveCycle will not work for End User

Please Help!
I am a newbie to Adobe LiveCycle but recognized the utility in the program, so decided to give it a while to try and streamline some of my employer's forms. After spending too much time learning how to design a form (much to the dislike of my boss), I am finally going to have to ask for some help. So here's the deal:
I've designed a dynamic pdf in LiveCycle with two master pages and two repeating flowed subforms. The first repeating subform is basically an expanding table intended to be used as a photographer's log where they can log each photo taken with the camera. The expanding table has some code with a button at the top for the end user to enter the number of photos on the photo roll, click submit, and table expands to however many instances of rows are needed for each photo that was taken. The second subform is basically an image field and text fields used as photo captions/photo compilation pages. When the end user clicks submit on the first subform to expand the table, I also have javascript in that click event to also create same amouint of instances of the second subform (the photo compilation page(s)). Each text field for the photo caption on the second subform is populated by the data entered into the photo log table cells. I was able to find a script to correctly populate those fields for each instance of the table. Wish I had the form here, but it's at work at the moment.
My problem is this: I've scratched and clawed to get all of the forms expanding correctly and the scripts populating each instance of the fields correctly and everything works great in LiveCycle preview. I then saved the form as PDF for use by my field crew personnel (whom all use, at the very least, Adobe Pro 9, but most Pro X). I sent the new form to them and they move it to their desktop, open it with Adobe Pro, and populate all of the fields and everything works swimmingly. However, once they save it, it gets all jumbled and they can't even print it. We even thought we found a workaround by entering all data and printing to PDF, but even that has turned out to not work. I checked to make sure that I designed and saved the form in LiveCycle for use with the Adobe Pro versions, but still not working for my end users.
Anyone have any thoughts on my long explanation?? Please HELLLLPPPP!

The error(s) occur when trying to save the document. I want each user to tell the first page how many rows they will need in the photo log table, so they would enter however many photos were taken in the box: "Number of Photos on Roll:" ---> Then click the "Submit" cmd button. That should expand the table. Once it expands, it should also add the same amount of instances of the photo compilation page (2nd Page) as there are rows in 1st page table. Then the user will populate each cell of the table on page 1 with data. The data entered into the page 1 table cells will populate the text fields (photo caption) in Page 2 once the user clicks on the "Populate Captions!" cmd button in the lower left corner of the table on Page 1.
The problem is in the distributing of the form to the user so they can save the form after populating the data. I did a test run this morning and for some reason it did do the "print to PDF" correctly for 5 photos on the roll (though this has not been happening every time and especially for a large number of pages, ie. 80 photos). However, after entering the data for 5 rows on page 1 and then populating the 5 photo compilation pages, I saved a copy as "Save As PDF" and closed the document. Then re-opened the copy in Acrobat Pro X. The new copy:
-had 5 additional rows added to Page 1
-Duplicates of some of the fields
-Only retained the 1st instance of the Second Page (Photo w/ Caption) and not all fields were populated
Again, this all works fine in the LiveCycle Preview but not anywhere else. I do not have this set up to be linked to an external data source (YET) but there is javascript in the cmd buttons. I also do not want to distribute this form to end users and then collect the data back from them. I want them to be able to save a copy of my LiveCycle designed form, open in Adobe Pro, populate the data and save as many copies as needed for form production.

My wifi will not detect networks and will not search for other networks when I search for them. Do I need a new iPhone or can I fix it myself?

My wifi is on and when it tries to find a wifi connection, the gray little circle just keeps spinning and will not detect our home wifi. I have tried to search for it and connect to it manually, but it will not search for the network name. I'm hoping I don't need a new phone so please help.

The following may have something that will help: http://support.apple.com/kb/TS1398

My Apple ID password will not work for downloads + pop-up issues

I have an Apple ID and password, yet it will not work to log into ICloud or for updates on my Mac. My computer is only 1.5 years old. Also, I continually get a pop-up that I need to create a password for Safari, but if I do not hit "cancel" I will have lose all Keychain passwords.
All of this started with the download of Mavericks, which was a BIG mistake.

Hello vickieucb,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Apple ID: If you forget your password
http://support.apple.com/kb/ht5787
Best of luck,
Mario

Scan to network folder will not work for Yosemite

Similar Messages

Maybe you are looking for