SCAN TO WORD IN EDITABLE FORM

can this model scan to word in an editable form? OCR installed to word

Hi,
You have to buy an OCR software or try the following free products:
   http://free-ocr-to-word.en.softonic.com/
   http://www.free-ocr.com/
for Word:
http://office.microsoft.com/en-au/word-help/scan-and-edit-a-document-HA010254879.aspx
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Mac os x 10.7.4 connected to a photosmart c309a. Scan documents to word and edit?

    I have a mac os x 10.7.4 connected to a photosmart c309a.  I use the mac drivers to scan document.  Everything is updated and working fine.  However, I would like to scan a document, copy it to word, and edit.  How can I do this?

    The OCR software does not necessarily need to integrate with the HP Photosmart driver.  You scan the document, save it as a JPG, TIFF, PDF or whatever and then run the OCR software against the scanned file.
    I use Readiris with an HP AIO printer on Lion and it works just fine, using MS Word to edit the results.

  • How to scan a hard copy to pdf that I can convert to word for editing?

    I've got a HP deskjet 3050A and my operating system is Windows 7, how to scan a hard copy to pdf that I can convert to word for editing?
    This question was solved.
    View Solution.

    Hi,
    The software provided for your device does not include OCR functionality
    You may use any 3rd part OCR solution to scan as editable text.
    If you have Microsoft Office suite there is a good chance the office suite provide this kind of capabilities:
    Office 2007 or 2010:
    http://www.howtogeek.com/howto/14595/ocr-anything-with-onenote-2007-and-2010/
    Office 2003:
    http://agsci.psu.edu/it/how-to/perform-ocr-with-microsoft-office-2003-document-imaging
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Export pdf and acrobatX! - I want to scan into word so I can edit the text

    how do I scan a document into editable text?

    Hi grandmalib,
    If you use either Acrobat or ExportPDF to convert a PDF file to Word, it automatically performs optical character recognition (OCR) on the PDF file to convert scanned text to editable text. All you need to do is make sure that the correct language is selected for text recognition (in ExportPDF, look at the Document Language for Text Recognition pop-up menu).
    In Acrobat, you can save a PDF file in Word format by choosing File > Save as Other > Microsoft Word > Word Document. Click Settings to change the language selected for text recognition.
    Best,
    Sara

  • How to allow users to edit form

    Maybe this isn't a typical use for these forms, but I thought I would give it a try.  I need to create product specification forms for my designers to fill out to give to their clients.  There are standard fields in the form such as product information, pricing., etc that remain fixed. However, my designers need to be able to edit the form in order to place different product images since there doesn't seem to be an option for users to directly up images into the document(unless I missed it).   In Adobe Acrobat Pro, users can edit PDF images and content to suite their specific needs.  I need to enable this option on my form when creating them, so my designers can edit forms according to their project.  After opening a PDF Form I created in FormsCentral in Adobe Acrobat Pro, I click "Edit Text & Images," but I get a message that "This is a secured document.  Editing is not permitted." When creating a form, what do I need to do so that my documents may be edited or is it even possible with this program.
    Thanks,
    Valerie with Fresh Perspective Design & Decor

    Thank you, that worked!  I'm new to Adobe FormCentral and this is the first PDF document I've ever created.  I see how it could be beneficial to have forms submitted in the future for questionaires that our clients fill out, however, I thought this might be a useful tool for just creating a PDF document.  Maybe there is a better way to go about doing it, but thus far this is the best option I've seen yet unless you can recommend something that would be more effective.  I recently became a Creative Cloud member and I just stumbled across FormCentral while looking for a solution to creating these forms.  Normally I would have created a document like that in Microsoft Word, however, I thought this would be less time consuming for my designers to fill out. Are you aware of another way that would be more effective?  I'm afraid I am not super tech savy, but do learn new programs quite quickly.  Thanks for your assistance!

  • What is the best method of making revisions to a PDF document with editable form fields?

    I created several documents/forms in Microsoft Word in order to use tables for formatting, then turned them into PDFs using Acrobat X Pro.  The auto form field recognition feature in Acrobat doesn't always recognize every field in the document, so I had to manually create some of them and alter their properties for correct font size, scroll long text, etc.  I now need to revise / add more information to the documents.  The only thing I know to do is to make these revisions to the original Word document, save as PDF, and redo all editable form fields again.  Is there an easier way to edit these documents while keeping the current editable fields and their properties?  Thanks.

    Thank you!  That seems to work fine and keeps my old editable form fields.

  • Want to scan an image from oracle forms -- Is it possible??

    Hi all,
    I want to scan an image from oracle forms through a scanner. I have not found any help on this topic. Pls help with example or code or with demmo form.
    BR
    Tarik.
    Edited by: Tarik_kuet on Sep 9, 2008 1:39 PM
    Edited by: Tarik_kuet on Sep 9, 2008 1:39 PM

    A colleague of me did it like this:
    * the scanner is connected to a network document server.
    * the document server sends(ftp) the image to the oracle XDB
    * a form shows the scanned documents(using a view on the ftp directory in XDB using path_view)
    * in this form the user can move the scanned document(s) to a (blob field) in a table.
    Hope this helps a bit...
    Edited by: poelger on Sep 9, 2008 10:08 AM

  • Can you create editable forms in Acrobat X Standard?

    Hi everyone,
    Hopefully an easy question although I cannot find a definitive answer on the product page.
    I need to be able to create editable forms that others can fill in and print or save using Reader 8, 9 or X. Can these forms be created using Adobe Acrobat X Standard? The forms have been created in Word 2007 but we want to disribute them as PDF's and allow certain fields to be filled in on the PDF. The form will be downloaded from a website, filled in and emailed back.
    Any clarification on this is greatly received.
    Thanks...

    I know you can create forms with Standard but I don't think you can enable them so that Reader users can save them without the Pro version.
    dasnowball87 wrote:
    The form will be downloaded from a website, filled in and emailed back.
    Even if you could do this, you would want to carefully consider whether you want a form out there for everyone to fill out and send in. There is a restriction to the amount of times you can receive data from an enabled form. After 500 times, you would be violating the license agreement.

  • Editable form text editing messing up the whole form

    Hi All,
    I've created a fillable form in Acrobat X but at the end, I realized that I left a spelling mistake. Now when I try to fix this mistake using Edit Document Text, it changes the orientation and alignment of other fields around it causing messing up the whole form. Can anyone advise any solution. I can provide the form to you to have a look or correct it for me if someone can kindly. Please advise as this is urgent and this form needs to be delivered ASAP. Please see the screenshot below. I need to correct the spelling of Blocked which is written as BOCKED without changing other formatting of the document. Thanks in anticipation!

    Hi @Gilad,
    Thanks for the suggestion but this file was originally created in Word and after conversion to PDF, I've made a lot of radio buttons, check-boxes in this file which I certainly don't want to redo. Now if I convert this page back to Word and edit this single word, then it means that I would have to create all the radio buttons, check boxes etc again which is time consuming. Any help if I can just correct the spelling of this single word without changing the formatting of the fields besides it?

  • How do I scan a doc then edit.

    How do I scan a doc then edit.

    Use Acrobat. Run the paper document through the scanner. Bring the scanner's output image into PDF. Acrobat provides for OCR of scanned images of textual content. Because the file is PDF "editing" is problematic. PDF does not suffer "editing" gladly. Minor touchups are possible and the best application for this is Acrobat.  With that said of the three methods of OCR it is ClearScan that most readily supports modification of the OCR output.  Perhaps more effective is to export the OCR output to a Word file. Do the content cleanup (a word processing format is designed to support content editing) then output a fresh PDF.
    Be well...

  • Displaying scanned image in image edit control

    Hi,
    i have a kodak image scan control and kodak image edit control on my form. iam able to scan images and save them to filesystem, but iam not able to display the scanned image in the image edit control. can anybody pl. help me.
    thanks in advance.
    Krupal.

    Hi emery,
    thanks a lot. but to load by load_image_file the image i dont have an image on the filesystem. the image has to be scanned and the scanned image has to be displayed in the image edit control. so what i need is to link the image scan control and the image edit control. for that i have to specify the destination source of image scan control to image edit control. but the destination source is a list in scan control which is not editable. moreover the list contains the image edit control name as imagedit1... no matter what u specify the name in property palette. anyway i tried all these.. but all my efforts were invain.
    bye.

  • I have opened scanned pages in to acrobat X1 pro and cannot edit, it says its not editable text how do I scan it as an editable text

    I have opened scanned pages in to acrobat X1 pro and cannot edit, it says its not editable text how do I scan it as an editable text

    All scanners output one thing only -- an image, a picture of the stuff on the paper that was scanned.
    There is not "text". There is a picture of text characters.
    This image / picture can be brought into a PDF. What is in the PDF is still an image / picture of text.
    Open the PDF with Acrobat. Use Acrobat's OCR feature.
    If you desire to touchup some characters use the "ClearScan" OCR.
    (Review Acrobat's Help to resolve any questions on this.)
    Note that PDF is not a word processor file format and does not tolerate word processor like "editing".
    Use Acrobat to do touchups to characters and short character strings. Save As often.
    Be well...

  • Hide content type from the new menu but show in edit form

    SharePoint Online, I have following 4 site content types Word Document Excel document PowerPoint document General document
    These content types are being used in a document library and "Word Document" is the default content type, When user clicks on "new" menu, all 4 content types are shown.
    I don't want to show "General document" in the new menu but I want to show in edit form, I have marked it hidden in the library settings but now it is not visible in the edit form.
    Any idea how can I hide content type from the new button but show in edit form?

    Hi,
    Whether you use SharePoint online 2013.
    If we hide the content type in the library settings, the content type will not be displayed in both new menu and edit form.
    To accomplish your qequirement, we need to use css code:
    style <style type="text/css">
    ul.ms-cui-menusection-items32 li:nth-child(4) {
    display: none !important;
    </style>
    perhaps your environment is different with mine, you need to make a little change to the code. 
    Best Regards,
    Lisa Chen
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have
    feedback for TechNet Subscriber Support, contact
    [email protected]
    Lisa Chen
    TechNet Community Support

  • Browse and Edit Form - JSP

    Hi all,
    Using BC4J and BC4J JSP to generate Browse and Edit Form, e.g. EmpView_browse.jsp, and EmpView_Edit.jsp, I want to show only a few attributes in browse, and all fields in edit. If I change the "display" in control hint to hide, the attribute will not be displayed in both pages.
    Please help.
    Regards,
    Terry Luk

    Hi,
    try something like this :
    <jbo:ViewObject id="voBrowse" name='<%=dsParam%>' />
    <jbo:AttributeIterate id="df" datasource="<%=dsParam%>">
    <% if (df.getName() == "InvoiceNr") {
    <th class="clsTableHeader" title="<jbo:ShowHint hintname='TOOLTIP'></jbo:ShowHint>" ><jbo:ShowHint hintname="LABEL"></jbo:ShowHint></th>
    <% }%>
    </jbo:AttributeIterate>
    <jbo:RowsetIterate datasource="<%=dsParam%>" changecurrentrow="false" userange="true">
    <tr>
    <jbo:AttributeIterate id="dfv" datasource="<%=dsParam%>">
    <% if (dfv.getName() == "InvoiceNr") {
    <td title="<jbo:ShowHint hintname='TOOLTIP'></jbo:ShowHint>" valign="top" > <jbo:RenderValue datasource="<%=dsParam%>"/> </td>
    <% } %>
    </jbo:AttributeIterate>
    </tr>
    </jbo:RowsetIterate>

  • How to redirect from list edit form to another page using jquery in sharepoint 2013

    hi friends i have been trying to find a way to redirect from list edit form to another page using javascript and jquery
    i found lot of codes online but non of them are working for me.
    what i need is i have to save the data in the form and after that it has to redirect to another page. it has to get the url from hyperlink field of the item.
    please help me in this regards

    Not sure if you have gone through below links:
    http://spservices.codeplex.com/wikipage?title=%24().SPServices.SPRedirectWithID
    http://blogs.askcts.com/2013/02/18/using-spservices-and-jquery-to-perform-a-redirect-from-a-sharepoint-list-newform-to-editform/
    Please ensure that you mark a question as Answered once you receive a satisfactory response.

Maybe you are looking for