Scandisk Extreme Pro class 10 Cd card does not work in reader

My SD card will not work in reader after I took pictures with my 60D and tried to transfer to MacBook Pro. I tiook the card to best buy and it worked in all IMacs and MacBook Air but none of the Macbook Pros. I read a couple of blogs and they said its the i7 processors that are having the problem. i don't know what the processors were at the store but I do know they weren't working. Does anyone know of a fix for this?
MacBook Pro
MacBookPro8,1
Intel Core i7
2.7 GHz
8 GB

solo22 wrote:
My SD card will not work in reader after I took pictures with my 60D and tried to transfer to MacBook Pro. I tiook the card to best buy and it worked in all IMacs and MacBook Air but none of the Macbook Pros. I read a couple of blogs and they said its the i7 processors that are having the problem. i don't know what the processors were at the store but I do know they weren't working. Does anyone know of a fix for this?
MacBook Pro
MacBookPro8,1
Intel Core i7
2.7 GHz
8 GB
I am unable to read the class 10 cards in my i5 quad core 15" MBP, as well. There are reported fixes, including resetting the System Management Controller (SMC) (see the details by following this link => http://support.apple.com/kb/HT3964)... but so far, nothing I have found/tried will work with the class 10 cards, regardless of the SD card's storage capacity.
EDIT TO ADD: My cards are Sandisk Extreme class 10, 16GB SDHC cards. I don't have the Extreme Pro version of the card. My personal experience leads me to believe the issue is related to the SPEED of the card and NOT THE SIZE.

Similar Messages

Macbook Pro Retina - nVidia card does not work correctly

Hi,
having a MacBook Pro Retina. It ran fine till yeasterday when I fired up a game which was laggy and it was running fine before. It took me several hours to find where the problem is and it seems to me that the nVidia dicrete card is not working. But strangely not working. I installed gfxCardStatus to see whether the card is being switched to run the game and it actually is. But the performance is the same as running it on an internal Intel. I took another test and downloaded CINEBENCH to see the differences and sadly the results are the same if I switch to nVidia or to Intel and run the benchmark.
Obviously something is not right here. It happened over night. Before it worked corectly. I do not remember installing something that day/night that could have broken it (in case it is a SW problem). Only one thing comes to my mind - Apple Java update. But I tried to uninstall it and got the same result. I did try to restart several times. But otherwise there is no visible flaw, e.g. flickering or black screen when swithech do nVidia - nothing. gfxCardStatus shows that the system switches the card and I notice no change. Only in heavy load it is obvious that it is slow (slower than it was).
Is there a way to see if the nVidia card is working? I suspect that even if the system is trying to switch to a discreet card it still runs on the Intel in reality. Any way how to distinguish this rather than to rely on gfxCardStatus? Any log that would make this clear? Any test I can run (Apple HW test shows "no problem detected")?
Many thanks for hints.

To show what I am talkin about I did another test. I downloaded and ran LuxMark. There it is possible to test CPU and GPU separately on a same benchmark scene. FIrst I let the system switch to nvidia and did the test:
Then I manually switched to Intel/CPU in gfxCardStatus and also selected CPU in the LuxMark and did the same test. The result is:
You see? How it is possible that in OpenCL computation CPU with internal graphic card is even faster then the descreet one? This is what I am experiencing now and cannot figure out where the problem lies.
Would the Apple HW test discover a dead nvidia card? Because nothing shows that the card is dead but as you can see it is not performing as it should.

Satellite Pro 4600 Wireless card does not work with WIN2K ?

I have a Satellite Pro 4600 with UK dealer installed PA3070U-1MPC wireless card running with Windows 2000
The wireless client manager finds the network of my wireless router and reports the signal is excellent and I see all green bars swhowing.
However I can't mske a connection, in 'connections' the wireless one says 'network cable is disconnected'
the router works ok with other laptops in my house.
I have latest version of Win2K also have downloaded and installed latest versions of client manager and WLAN card driver for win2k from toshiba website.
The 'toshiba support in Turkey' told me 'I need a different driver for Win2K for my wireless card cause the win2K driver on the toshiba website is not for 'this' wireless card'. I have waited for this for 3 weeks now and have been unable to reach the elusive UK Level 3 support who supposedly have this driver. I have seen on the internet the same wireless card is has been sold as a 'made by toshiba' accessory and it says it is compatible with Wim2K
What do I do next please ? Does this run at all with Win2K , is there 'another driver' and so on ?
Thanks

hello
please be more scpecific - what do you mean by 'disconnect the LAN' - I have nothing conneced there anyway ? do you mean 'disable' the LAN even though there is nothing plugged in ? can you please post the exact sequence of this so I can try ir too.
In the meantime my laptop has been to Toshiba for them to sort out at their highest level UK support base. I was hoping my troubles would be over - but no, read below what happened. They are basically saying my win2k is not in order but I had just installed and updated it so right now I haven't a clue what to do next.
START QUOTE of Toshiba Support response:
Sat Pro 4600
Serial No: 31474181G
Windows 2000 SP4 (customers build not recovery CD)
BIOS V1.80 not current therefore updated to V2.60
The notebooks wireless card is functional and has the correct driver installed, it also has the correct and latest version of the Wireless Client Manager. The wireless function appears to see the router but will not connect and obtain an IP address. Irrespective of the settings applied within Internet Explorer or the Wireless client manager you cannot obtain a connection. The customer did not have any Toshiba utilities installed such as, Power Saver, Common Modules, Chipset drivers, network device switch, I therefore installed these missing components and updated the BIOS to the most current revision. However despite this the unit will still not connect to the wireless.
I therefore removed the customers HDD and replaced his HDD with a Toshiba loan HDD with a fresh build that I had created. When using the machine with this build the wireless connected without issue and I was able to browse the internet etc. I placed the customers HDD into our machine and the problem with the wireless was replicated on our machine here, therefore the problem is not with the wireless card or any hardware aspect of the machine, the problem lies with the customer's build of Win 2000. I examined for anything obvious but could not find anything, therefore I'm sending this machine back to customer with the advice that his build needs addressing or he needs to reload Win 2000 his machine.
As you can see from the above comments, the machine performs as per specification with loan HDD and fresh build of Win 2000 installed, the problem is only present with you HDD and build in the machine. In addition to this I have replaced the missing screws on the base of the machine ensuring the machine is structure is maintained.
5 x B16 Screws
1 x B6 Screw
1 x Memory Cover Screw
END QUOTE

I have PCI-4452-this card does not work with XP. Are there fixs available?

I have the PCI-4452, i fould that when i installed XP on my system, the card does not work. Does this card have any drivers for ir to work on XP. Or do i have to stay on NT.

Hello,
This card is actually supported under XP for use with drivers since 6.9.2 and above (only traditional driver).
Kind Regards
Steven Bird
Applications Engineer
National Instruments

HT3986 I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 pro

I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 problem

i try to download now, do you think when i download and install the windows support software, can i fix the problem?

I purchased Label Printer Pro 7, but it does not work. It crashes. Please recommend an address/shipping label program that works with Avery labels. Thanks.

I purchased Label Printer Pro 7, but it does not work. It crashes. I press print, and the program closes. I press save, and the program closes. I press print and the program closes. I have had an email exchange with Pabel Printer Pro 7, but the best they could offer was to go to Utilities and click on fixed permssions. I have done that several times, and the program still doesn't work.
Can you please recommend an address.shipping label program that works with Avery labels that I can purchase, and that is also simple to use?
Thanks,
Paula

I purchased Label Printer Pro 7, but it does not work. It crashes. I press print, and the program closes. I press save, and the program closes. I press print and the program closes. I have had an email exchange with Pabel Printer Pro 7, but the best they could offer was to go to Utilities and click on fixed permssions. I have done that several times, and the program still doesn't work.
Can you please recommend an address.shipping label program that works with Avery labels that I can purchase, and that is also simple to use?
Thanks,
Paula

Wireless Card does not work in Windows 8.1 for G585

I just wanted to inform someone that the wireless network card does not work in Windows 8.1 Preview. I suspect the driver needs to be updated. When I go to the Device Manager it appears as a Realtek device RTL8192DE instead of a Qualcomm device that does not start. I tried installing the latest driver from the website but it makes the computer crash (BSOD) when trying to reboot after the installation which makes the Windows 8 automatic recovery turn on and I had to restore the system to a previous state before the driver installation.
For now, I just refreshed my system back to Windows 8, instead of trying to use Windows 8.1 Preview . If you have any suggestions, it would be great, otherwise I'll wait for a driver update.

neilwar wrote:
Oh goody. Just updated to 8.1 and it doesn't work. Looks like everyone else is having the same problem. Why no answer from Lenovo?
Please refer to the dedicated thread on "Blue" 8.1.
Thread locked
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

HT204022 Flash player required to open a e card does not work?

Flash player required to open e card does not work?

iOS devices do not support flash. There is no flash available, nor will there ever be. Adobe has announced that it is discontinuing development of flash on mobile devices.

LC digital signature does not work in Reader

I have added a signature field in a LC form with expectations that it would work in Reader.
I can see the field but it does not work in Reader. I have opened the form in Acrobat and the signature field works.
Any ideas on resolving this?

Wasil,
Thank you for the reply.
As I do not have LC Server I used Acrobat Pro to save as reader extended which solved the issue.
Regards,
James A Hiltz CET
Quality Assurance Supervisor
Terracon Geotechnique Ltd.
Quality Quote:
“Quality begins with the intent, which is fixed by management.” — Edwards Deming

Satellite Pro A200 Windows XP, 4Gb SDHC Card does not work.

Hi,
I have had a Satellite Pro A200 installed with Windows XP, SP2 for some time - No problems there, a great piece of kit. However I recently have bought a new camera and splashed out on a Kingston 4Gb SDHC card. The manual for my A200 seemes to indicate that it my laptop is compatible with SDHC cards to 4Gb however when I push the card in the LED flashes blue briefly and then nothing happens. My SDHC card does not appear to be recognised by the system.
I see no errors in my OS event log and I have checked the slots operation by trying an older 512Mb SD card and that works fine.
Can anybody offer any help please?
For reference this laptop is a Model PSAE4E A200.
Many Thanks in advance
Simon

If the above fix does not work (which it didn't for me on a Satellite Pro A100 running XP), try
[http://support.microsoft.com/kb/923293] .
That one did the trick

Added USB Card does not work.

I just added a 5 Port (4 external and 1 internal) USB PCIe Card to my mac pro. The MAC see the card but anything I plug in does not work. The items I plug in work on the other Apple USB Busses but not on the new card. This is actually my second card for this (I thought the first one was bad) but now I am beginning to think the MAC PRO is bad. I have plugged the card into every slot on the motherboard and they all are the same. card is recognized but anything I plug into the card is not...
Does anyone have any suggestions?

Hi Bruce Leingang;
Everything I found on the web about that card say that it only works on Windows PC.
Allan

2nd video card does not work

I have a spare Mac Pro here so I decided to remove the video card and put it in the one I'm using. Both machines were purchased in '09 and use the same video card (ATI Radeon HD 2600). The two monitors I have hooked into the original video card work fine but the monitors I hooked into the newly placed video card are not working. Under the About This Mac specs >> PCI cards it shows up and says driver is installed. Is there anything special you need to do to get a second video card to work?
Thanks.

I tried the SMC reset. I removed the card and reseated it. I'm seating it in slot 2 because that's the only other one that is x16. The other slots 3-4 are x4. Still nothing is showing up. When I go to System Preferences >> Displays >> Detect Dispalys nothing happens. The two displays plugged into the original video card work fine but the newly installed on does not show up. Here is what the Mac Info is detecting. Maybe this makes sense to someone. Not sure what MSI is referring to and the second video card is reading as "display" instead of "ATI Radeon HD 2600". Link speed on the second card is half that of the original.
About This Mac >> More Info >> PCI Cards >> Slot-1
ATI Radeon HD 2600:
Name:    ATY,Lamna
Type:    Display Controller
Driver Installed:    Yes
MSI:    Yes
Bus:    PCI
Slot:    Slot-1
Vendor ID:    0x1002
Device ID:    0x9588
Subsystem Vendor ID:    0x106b
Subsystem ID:    0x00a6
Revision ID:    0x0000
Link Width:    x16
Link Speed:    5.0 GT/s
About This Mac >> More Info >> PCI Cards >> Slot-2
display:
Type:    VGA-Compatible Controller
Driver Installed:    Yes
MSI:    No
Bus:    PCI
Slot:    Slot-2
Vendor ID:    0x10de
Device ID:    0x0393
Subsystem Vendor ID:    0x0000
Subsystem ID:    0x0400
Revision ID:    0x00a1
Link Width:    x16
Link Speed:    2.5 GT/s

Macbook Pro Pinch/Zoom feature does not work with Firefox 6

Can someone please tell me how to fix this major problem?
I can not get the Pinch/Zoom feature on the track pad to work on my Macbook Pro. I am running OS 10.6.8.
I have seen this below in other posts, and have tried it, but it STILL does not work !!!!
'''''Some gestures have been removed in Firefox 4.
'''You can restore the zoom feature by changing the values of the related prefs on the about:config page.
'''browser.gesture.pinch.in -> cmd_fullZoomReduce<br>
'''browser.gesture.pinch.in.shift -> cmd_fullZoomReset<br>'''
'''browser.gesture.pinch.out -> cmd_fullZoomEnlarge<br>'''
'''browser.gesture.pinch.out.shift -> cmd_fullZoomReset<br>''''''
'''To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website.'''
'''If you see a warning then you can confirm that you want to access that page.'''''''''''
Please someone help me - this is a great feature and its really pissing me off that I can't use it.
HELP !!!

I'VE TRIED THIS:
browser.gesture.pinch.in -> cmd_fullZoomReduce
browser.gesture.pinch.in.shift -> cmd_fullZoomReset
browser.gesture.pinch.out -> cmd_fullZoomEnlarge
browser.gesture.pinch.out.shift -> cmd_fullZoomReset
browser.gesture.pinch.latched -> false
I'VE TRIED ALL OF THE ABOVE NUMEROUS TIMES AND IT DOES NOT WORK ON MACBOOK PRO AND FIREFOX 6.
CAN ANYBODY HELP? THANKS ♥

Help!! after I upgrade os vga card does not work with my ipad2...

I use ipad2 my class presentations. VGA cable was fascinating to show most of ipad screens, but after I upgraded os it does not working any more.... os bugs? Please give me advices.... I need to use it this week!
Dan

As of Firefox 4.0 and newer one needs at least OSX 10.5+ and Intel hardware.
The latest you can use on your Intel with OSX 10.4.11 is Firefox 3.6.25 (released recently) which can be found at http://www.mozilla.org/en-US/firefox/all-older.html
If you were to update to say OSX 10.5.8 then you can use Firefox 9.0.1

PCI wireless card does not work after restart - FM2-A55M-E33

Installed TP-LINK WN751ND wireless PCI card onto FM2-A55M-E33 motherboard. The card works fine after cold start, but does not work after restart. Windows recognises the card, but it gets code 10, cannot start.
BIOS is updated (v.11.1), as well as drivers and Windows 7 64.
I suspect that this might be the issue: Incorrect ASPM Transitions on the GPP Interface as found in ChipsetMotherboard_TechDocs/48671.pdf on AMD's official support site.
Does anyone know more about this issue?

Great! I've done that and now my card shows up. Thing is, when I try to get an IP address, it won't work. Here is the command output:
ieee80211 phy0: wl_ops_config: change monitor mode: false (implement)
ieee80211 phy0: wl_ops_config: change power-save mode: false (implement)
ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: false (implement)
And then it times out and no IP is assigned. The thing is, wpa_supplicant stays alive after this time out, and I am unable to kill it (killall -9 wpa_supplicant won't kill it). At this point if I try to reboot the machine, it will stop at 'Rebooting' and won't go anywhere. If I turn off the wireless card in its switch Linux crashes. If I try to get an ip again (by running dhcpcd) the command will hang and not return to the shell anymore.
I am unable to find any useful information in the logs.
Got any more suggestions?
Thanks! (And sorry to disturb so much)

Scandisk Extreme Pro class 10 Cd card does not work in reader

Similar Messages

Maybe you are looking for