Scanjet 9000 won't detect a single document but will detect a set of 10 documents in the feeder.

scanjet 9000 won't detect a single document but will detect a set of 10 documents in the feeder.

Hi,
I have had a similar problem. I have a 1Tb portable Seagate drive which I have been using successfully for backups with time machine on a Macbook running Lion for 18 months.
I decided to upgrade to Mavericks and experienced the same symptoms as above. The machine would not recognise the disk in finder. Disk utilities could see the disk but the partition was greyed out and several attempts to repair disk were to no avail. I am afraid that I made matters worse by unsuccessfully trying to reformat the disk.
I made a backup of my macbook to another older mac and tried the hard disk with an old Windows laptop running Vista. It recognised the disk but said it need to be formatted. This I did.
In the mean time I had upgraded my Macbook from 10.9.3.to 10.9.4. I am not sure if this made a difference.
I then plugged the hard disk back in to the Macbook. It recognised it immediately and said that it needed initialising. This I did successfully and (MAC os extended Journal). The disk now works perfectly with 10.9.4 on the Macbook and I have been able to use Time Machine with it to make a backup.
I know this does not help with rescuing data from the hard disc but at least I now have a usable hard disk!

Similar Messages

My apps won't download to my iPad but will to my phone. When I put it my password, it just stops and won't do anything else????

My apps won't download to my iPad but will to my phone. When I put it my password, it just stops and won't do anything else????

Unless you have a copy of the iPod backup file from the previous computer installation you are out of luck. If yo have that file move it to your computer and restore the iPod from that backup. Otherwise, you will have to restore the iPod to factoery defaults/new iPod and lose all your app date. That is the way it is since the iPod sees the computer as a new computer/iTunes library. That backup file is located:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\

Hp 7525 Photosmart printer won't scan to my PC but will scan to other PCs on the LAN

Hp 7525 Photosmart printer won't scan to my PC but will scan to other PCs on the LAN. I tried to install the printer software but it says it is already installed. Do I have a security setting wrong?
Other PC names show up on the printer's touch screen but not mine. We are all on the same wireless subnet with the printer at a fixed IP address.
I can print from my PC and scan from my PC but I can't scan from the printer touchscreen to my PC.
tcliff

Hi,
You may have to start from your computer first:
    Double click printer icon on desktop,
    Select Manage Scan to Computer
    Click Enable -
    Restart your printer to see, is your machine in the list ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

MacBook Pro won't connect to home wifi, but will connect to other networks

Help! MacBook Pro won't connect to home wifi but will connect to other networks. Others can connect to my home network. I've tried diagnostics, resetting the router, restarting my computer, and forgetting the network and then trying to access it. Nothing works.

Hey Brittany,
Welcome to Apple Support Communities.
It sounds like you’ve done quite a bit of troubleshooting to try and resolve the issue with your MacBook Pro not connecting to your Wi-Fi network. If you haven’t already, take a look at the article linked below which provides some additional troubleshooting suggestions that may help you resolve the issue.
Wi-Fi: How to troubleshoot Wi-Fi connectivity - Apple Support
So long,
-Jason

My mac mail won't let me receive emails but will let me send them. How do i fix this ?

my mac mail won't let me receive emails but will let me send them. How do i fix this ?

I am intermittently having the same problem. I can send email, but once the Mail application is opened, it will only pull emails in from the server one time and then I have to "Force Quit" and restart the application to receive incoming mail again. I've tried restarting the computer. I've made sure I have all the system updates. I've checked for conflicts between applications and so far nothing fixes the problem. Once in a while, Mail starts functioning normally on its own, but in a few days it goes back to the same old problem. Has anyone figured out what if going on with this isse?
Joan

My iPad won't receive face time calls, but will make them. any ideas

my iPad won't receive face time calls, but will make them. any ideas

Hi Go to settings FaceTime cellular data turn on. Cheers Brian

How do I scan more than one page into a single document? The option seems to have disapperared.

I have a Mac OS X Version 10.6.8 and am trying to scan several pages into one file, but the option to combine pages seems to have disappeared?

I meant what scanning application are you using. Sorry for not being clearer. Are you using Image Capture, for example, or an HP application? For example, if you use Image Capture then click on the Show Details button in the bottom status area:
A window will drop down:
Note the checkbox labeled Combine into single document. I think that's what you are looking for.

My MBP won't detect a projector even when I reboot the system.

I can connect to a monitor, so I know the adapter and cable are working, and my old HP will connect to the projector so I know it's not the projector, but my MBP will not even detect that a projector is connected.. I have tried multiple projectors as well. I am using a VGA cable with the apple adapter. I have read old threads, but there doesn't seem to be anything recent, and it seems like people were able to find the projector after restarting the system. I have tried all of the various displays sizes and colors; I have tried connecting the cables in various orders as one person said this worked for them, I have tried turning off the computer first, then connecting everything, I have tried connecting everything then restarting, but my computer just won't detect the projector(s). Any thoughts?

You can ignore those instructions. Adobe has what I believe is an easier way to install Flash by using the manual installers. See the Adobe troubleshooting guide - http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller

Won't print to photo tray, but will print test page

I have most current Vista driver, but can't print to photo tray. It won't pull the tray in, although it works great when printing test page. I tried various page/paper settings and "photo tray" light settings, but still won't print from Vista.
Tried 8250 printer properties, changing paper settings, but can't recognize settings, even though it sees the paper and prints the test page. Seemed to work just fine with XP.
This question was solved.
View Solution.

Plugged into an XP machine, photo printed.
Plugged back into Vista, fooled with the settings, then it worked!
I don't know what exactly fixed it...

Just Authored DVD won't play in DVD Player, but will in my kid's PS2

I just made this dvd with Studio Pro 3.0.2, burned it to a DVD-R and DVD Player won't play it and it used to play others I've authored, but now it won't..can't copy it either with Toast..it just opens up the tray again..no error code or anything. Anyone know what's up??
I think I'm doing everything just as I used to..
Thanks
Mark
Like I said..work's in the PS2....Weird

When you say DVD Player (standalone) or do you mean Apple DVD Player? Could be many things from a bad burn to the drive you are trying it in is going bad/dirty. When you are copying it with Toast why are you trying to copy it, why not just burn another copy off the build?
Anymore details on the process, what brand of media, how you burned it could point to where the issue is.

How do I fix it when an album won't play on my ipod but will in itunes?

How do I fix it when an album won't play on my ipod but eill in itunes?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Application (WMF 3.0) won't install during maintenance window, but will install when there is no maintenance window

Hi All,
I'm just getting into the Application model in SCCM 2012 R2 and I like what I see so far, but i'm running into an issue. When i set up an Application for WMF 3.0 with a prerequisite of .Net 4.0 and deploy it to a set of test systems that do not have
any maintenance windows applied to it, it works great. If it doesn't have .Net 4.0 it installs both that and WMF 3.0 and reboots. If it already has .Net 4.0, it will skip that and just install WMF 3.0 and reboot.
However, if i deploy it to systems that have a maintenance window applied, the application recognizes that it needs .Net and WMF 3.0 or just WMF 3.0, but it never actually runs.
Here is the applicable entry from the appintenteval.log, and i've bolded the line where it shows that WMF 3.0 is not installed
ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_0418fd00-0911-41d8-97f5-d7f04f58bd66/12 :- Title = WMF 3.0, Direct seleted dependencies = ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_4e541fdb-f444-4c5f-91f9-82c358325558/7 title=.Net
4.0,    AppIntentEval   4/24/2014 8:20:19 AM   1768 (0x06E8)
ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_0418fd00-0911-41d8-97f5-d7f04f58bd66/12 :- Current State = NotInstalled, Applicability = Applicable, ResolvedState = Installed, ConfigureState = NotNeeded, Title = WMF 3.0   AppIntentEval
4/24/2014 8:20:19 AM   1768 (0x06E8)
ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_4e541fdb-f444-4c5f-91f9-82c358325558/7 :- Current State = Installed, Applicability = Applicable, ResolvedState = Available, ConfigureState = NotNeeded, Title = .Net 4.0   AppIntentEval
4/24/2014 8:20:19 AM   1768 (0x06E8)
ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/Application_de66c10e-111e-4d68-95a8-5cee3f144081/13 :- Current State = NotInstalled, Applicability = Applicable, ResolvedState = Installed, ConfigureState = NotNeeded, Title = WMF 3.0   AppIntentEval
4/24/2014 8:20:19 AM   1768 (0x06E8)
ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/RequiredApplication_de66c10e-111e-4d68-95a8-5cee3f144081/13 :- Current State = NonCompliant, Applicability = Applicable, ResolvedState = Compliant, ConfigureState = NotNeeded, Title = ApplicationIntentPolicy
AppIntentEval   4/24/2014 8:20:19 AM   1768 (0x06E8)
and here are the entries from the AppDiscovery.log that are relevant:
Entering ExecQueryAsync for query "select * from CCM_AppDeliveryType where (AppDeliveryTypeId = "ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_4e541fdb-f444-4c5f-91f9-82c358325558" AND Revision = 7)"   AppDiscovery
4/24/2014 8:20:19 AM   2776 (0x0AD8)
    Performing detection of app deployment type .Net 4.0(ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_4e541fdb-f444-4c5f-91f9-82c358325558, revision 7) for system.   AppDiscovery   4/24/2014 8:20:19
AM   2776 (0x0AD8)
+++ Discovered application [AppDT Id: ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_4e541fdb-f444-4c5f-91f9-82c358325558, Revision: 7]   AppDiscovery   4/24/2014 8:20:19 AM   2776 (0x0AD8)
+++ Detected app deployment type .Net 4.0(ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_4e541fdb-f444-4c5f-91f9-82c358325558, revision 7) for system.   AppDiscovery   4/24/2014 8:20:19 AM
2776 (0x0AD8)
Entering ExecQueryAsync for query "select * from CCM_AppDeliveryType where (AppDeliveryTypeId = "ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_0418fd00-0911-41d8-97f5-d7f04f58bd66" AND Revision = 12)"   AppDiscovery
4/24/2014 8:20:19 AM   2508 (0x09CC)
    Performing detection of app deployment type WMF 3.0(ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_0418fd00-0911-41d8-97f5-d7f04f58bd66, revision 12) for system.   AppDiscovery   4/24/2014 8:20:19
AM   2508 (0x09CC)
+++ Application not discovered. [AppDT Id: ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_0418fd00-0911-41d8-97f5-d7f04f58bd66, Revision: 12]   AppDiscovery   4/24/2014 8:20:19 AM   2508
(0x09CC)
+++ Did not detect app deployment type WMF 3.0(ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_0418fd00-0911-41d8-97f5-d7f04f58bd66, revision 12) for system.   AppDiscovery   4/24/2014 8:20:19 AM
2508 (0x09CC)
   ActionType - Install will use Content Id: Content_c6b448d0-7b59-4796-bb29-3f7fbfa6e70d + Content Version: 1 for AppDT "WMF 3.0" [ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_0418fd00-0911-41d8-97f5-d7f04f58bd66],
Revision - 12   AppDiscovery   4/24/2014 8:20:20 AM   2508 (0x09CC)
I have a 2 hour maintenance window applied to this system. From the serviceWindowManager.log:
OnIsServiceWindowAvailable called with: Runtime:7200, Type:2   ServiceWindowManager   4/24/2014 8:20:21 AM   1768 (0x06E8)
No Service Windows exist for this type. Will check if the program can run in the All Programs window...   ServiceWindowManager   4/24/2014 8:20:21 AM   1768 (0x06E8)
        Biggest Active Service Window has ID = {02B82DF5-3360-4BCC-8154-9258F0B856C3} having Starttime=04/24/14
08:20:00   ServiceWindowManager   4/24/2014 8:20:21 AM   1768 (0x06E8)
            Duration is 0 days, 02 hours, 00 mins, 00 secs   ServiceWindowManager   4/24/2014 8:20:21 AM   1768 (0x06E8)
FindBiggestMergedTimeWindow called with TimeStart=04/24/14 08:20:21 and TimeEnd=04/24/14 10:20:00   ServiceWindowManager   4/24/2014 8:20:21 AM   1768 (0x06E8)
        Biggest Chainable Service Window for Type=1 not found   ServiceWindowManager   4/24/2014 8:20:21 AM   1768 (0x06E8)
I'm not sure what else to try next and appreciate any help anyone can offer.

Thanks. I checked that setting and i have it set to false, so i don't think that's it.
I've done a little more experimenting. I've changed my maintenance window back to 30 minutes. Prior to the MW opening, i'll run an application evaluation deployment cycle on the system. It will show the system as required WMF 3.0 but since
the MW isn't open, it won't install at the time.
When the MW opens, i'll watch the ServiceWindowManager.log and it sees that it's a 30 minute MW and that the run time is 15 minutes but it still says the program can't run:
ActiveServiceWindow has 1800 seconds left   ServiceWindowManager   4/24/2014 2:20:00 PM   2032 (0x07F0)
Program can run! Setting *canProgramRun to TRUE   ServiceWindowManager   4/24/2014 2:20:00 PM   2032 (0x07F0)
OnIsServiceWindowAvailable called with: Runtime:900, Type:6
ServiceWindowManager   4/24/2014 2:20:00 PM   2032 (0x07F0)
        Biggest Active Service Window for Type=6 not found   ServiceWindowManager   4/24/2014 2:20:00 PM   2032 (0x07F0)
Program cannot Run! Setting *canProgramRun to FALSE   ServiceWindowManager   4/24/2014 2:20:00 PM   2032 (0x07F0)
OnIsServiceWindowAvailable called with: Runtime:900, Type:2   ServiceWindowManager   4/24/2014 2:22:32 PM   816 (0x0330)
If however, i kick off another application evaluation deployment cycle on the system during the open MW, the deployment kicks off right away and finishes.
Program can run! Setting *canProgramRun to TRUE   ServiceWindowManager   4/24/2014 2:22:32 PM   2940 (0x0B7C)
OnIsServiceWindowAvailable called with: Runtime:900, Type:3   ServiceWindowManager   4/24/2014 2:23:49 PM   816 (0x0330)
No Service Windows exist for this type. Will check if the program can run in the All Programs window...   ServiceWindowManager   4/24/2014 2:23:49 PM   816 (0x0330)
        Biggest Active Service Window has ID = {02B82DF5-3360-4BCC-8154-9258F0B856C3} having Starttime=04/24/14 14:20:00   ServiceWindowManager   4/24/2014 2:23:49 PM   816 (0x0330)
            Duration is 0 days, 00 hours, 30 mins, 00 secs   ServiceWindowManager   4/24/2014 2:23:49 PM   816 (0x0330)
ActiveServiceWindow has 1571 seconds left   ServiceWindowManager   4/24/2014 2:23:49 PM   816 (0x0330)
Program can run! Setting *canProgramRun to TRUE   ServiceWindowManager   4/24/2014 2:23:49 PM   816 (0x0330)
This is not the behavior i would expect. I would think that if the client knows it has a pending application deployment that is required, when the MW opened up, it would start the install immediately or close to the beginning of the MW. It shouldn't
need to have an application evaluation deployment cycle kicked off during the MW.

IMac won't boot 10.6.4 but will Windows 7

Was playing a game on Windows 7 via Bootcamp. I restarted, and my iMac took an age to get to a blue screen on my Mac partition and then hung.
Reset the PRAM, rebooted and then it got to the Snow Leopard screen, but I couldn't select either of the user accounts, as although the mouse moved about it wouldn't select or click.
Tried again with no keyboard (prompted to install Bluetooth keyboard), another mouse, all have same problem.
Then tried to boot the Install DVD to use Disk Utility, but it gets to the Language choice, and again can't highlight options or click.
Single-user mode works but fsck finds no issues.
Safe mode either hangs at blue screen, or gets to login screen but won't click/highlight.
Apple Diagnostics show no problems.
And through all these problems, my Windows 7 installation is working perfectly.
Any ideas?

Seem to have sorted it.
For some reason my OS X partition had become 'unblessed', and selecting it in Startup Disc gave the prompt about not being able to bless the disk.
Finally managed to get my Install Disk to boot, wiped the hard disk, re-partitioned, re-installed 10.6, rebooted holding Command-Option-P-R, and when I heard the second bong, let everything go except Option. Once in the startup manager, I selected my new install, and it chirped up with the intro music for a new install.
It seems that something corrupted the OS X partition and removed it's 'blessed' status, and although I reset the PRAM and NVRAM, every unsuccessful boot re-corrupted the PRAM/NVRAM.

Please help me....Having trouble accessing iTunes store it won't load on my computer but will on Hubbys

I can't seem to get the iTunes store to load on my computer it lets me go through my playlists and stuff but not the store. My hubby has no trouble loading the iTunes store on his computer though the only differences between our computers is mine is Windows 7 and his is Vista.....
Does anyone know or have any ideas on how to fix this issue I'm going crazy trying to solve it cos I just brought a new iPod and it just won't sync properly either.
Thanking you in advance for any help your able to give

I am having the same issue... The following are the most common occurances:
1. Sometimes the progress bar will get to about 45% and then just sit there...
2. Every once and a while the store will half load but it looks like a poorly scripted website circa 1996... all text and hyperlinks (which don't work i might add.. see number 1.)
3. iTunes crashes all together when i clock on the store button.
4. Nothing happens at all... as if it wouldnt have the time to be bothered to load at all.
For the exhuberant amount of money that I and so many others are throwing at Cupertino, you would think they would have a half decent support team that reponds online... instead of tossing blue shirts onto 12-16 jokers into every store they had as if to say... come on in and lets have a go at this the hard way.
Frusterated.

PDF won't open in AI CS2, but will in CS; error message

My colleague and I are trying to determine the cause of an issue which arose yesterday in the middle of production of a corporate proposal. A PDF document submitted by the client had a form page to be filled out. Since it was evidently a PDF made from scans of the original, non-PDF document--possibly 6-7 years old--we elected to open it in Illustrator, type in data in text box overlays on a separate layer, and save again as a PDF.
Using "open with AI", CS opened, not CS2 (both are loaded on the machine), and brought up an error box called
Illustrator PDF: Warnings / "The document contains PDF objects that have been reinterpreted", and saying "This file was created with an unreleased version of PDF. Unexpected results may occur." The file opens, but the type is illegible at 100% (and clearly pixelated at 400%).
Attempting to open the PDF in Illustrator CS2 by any means produced a blank preview in the page preview box, and, once a page was selected, a blank the page, though the reading progress bar appears briefly.
Any ideas?
Thanks.

What kind of file is produced directly, before using Save as PDF in the Printer dialogue?
I am not certain I understand the question. This app prints calendars. I hope to use the print-driver's "Save to PDF" feature to produce PDF's. The app prints. The options in the print dialog determine if it goes to the printer or the disc.
What should I know about Qt, as to why one would use it -- is this development related?
The Norway-trolls say it better than I can
http://trolltech.com/products/qt/features/index
Qt is a comprehensive development framework that includes an extensive array of features, capabilities and tools that enable development of high-performance, cross-platform rich-client and server-side applications.
Qt is the leading framework for native cross-platform application development. The Qt API and tools are consistent across all supported platforms, enabling developers to learn one API and perform truly platform-independent application development and deployment. Using Qt, development teams can create native applications for all major operating systems - from all major development platforms.

Scanjet 9000 won't detect a single document but will detect a set of 10 documents in the feeder.

Similar Messages

Maybe you are looking for