Scanjet G 3010

My computer will not recognize my scanner.  I have uninstalled and reinstalled the software but I still can't scan.  HP does not offer support for my scanner since it is over two years old.  What is my next step?

If anyone is still listening - I have a similar issue, but will elaborate.
System:  Dell Dimension E520, WinXP Home SP3, Intel Pentium w/ 2GB RAM, plenty of HDD space (as in GB's).
 - Installed the ScanJet G3010 in '07, all was good.
- Added a Photosmart 8250 printer.  Then, shortly after an HP update, no scan to .pdf.
- 8250 died (~ 6.10), uninstalled it AND the scanner and software.
- Downloaded/installed latest ScanJet Driver & Software (7.09).  Scanner working well; scan to .pdf is back.  Got the plug 'n play event this time only.
- Install D7460 printer to replace the 8250 - printer works fine, but no scan to .pdf.
- Uninstall everything, clean registry, install locations, etc.  Now, sometimes Windows recognizes the scanner, sometimes it doesn't.  None of the scan buttons on the scanner function.  Scanner appears DIW (dead in the water)
- No plug 'n play event on install, except once on re-boot after removing unknown device in Dev. Mgr., but then couldn't locate the install software.
Note:  I keep getting Fatal Error 1316.A, have done the regserver trick per website instructions -- nothing seems to fix this.
Also:  Install routine then hangs on "Sending Error Report" -- only way to stop it is to kill it in Task Mgr.
Any suggestions??

Similar Messages

  • Scanjet 4370 installation problem in windows 7 64 bit

    I am trying to install my Scanjet 4370 Scanner to tw o different computers, both use Windows 7 OS, with one using 32 bit the other using 64 bit.  Icannot get the scanner to fuinction.  Currently I am trying to use it on a laptop with Windows 7 64 bit.  According to instructions online,  I may have to uninstall certain HP drivers/software first then reinstall it.  But I'm not sure which software to uninstall.  It took me many hours to get my HP Photosmart D7560 function, and I don't want to accidently uninstall software for this printer as part the process,  after spending so many hours to get the printer working.  I need help to get my scanner installed and functioning.  The scanner is well out of warranty, so HP is useless.

    Apparently there is a workaround where you use the driver from the Scanjet G3010 to get your scanner working in Windows 7 http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=457511&swItemId=cs_97451_1&swEnvOid=4063 Lots of older flatbed scanners do not work with Vista and Windows 7. I had to create a virtual Windows XP install last time I wanted to get a legacy flatbed scanner working in Windows 7. 

  • Hp scanjet 4850 drivers for windows 7

    i have an hp scanjet 4850 that i would like to use on a windows 7 Pro desktop PC.  i am having a problem finding the hp software / drivers for it.
    i did look through the hp site.  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=447374&spf_p.... 'Drivers, Software & Firmware for HP Scanjet 4850 Photo Scanner' gives just a basic driver 'HP Scanjet Basic Feature Driver' and 'HP Print and Scan Doctor', which tells me that the basic feature driver is missing items.  i know about the hamricks site that sells software, but i do not want to buy software that hp should be providing free.
    any ideas?
    I-)  ihor

    Have you tried the Vista full feature driver/software in Compatibility Mode?
    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?spf_p.tpst=kbDocDispl...
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Dont work driver on Scanner ScanJet 300 on winows 7

    Please, create new drivers for Scanner ScanJet 300 on Windows 7 platform. I have this divace. Dont work it on Windows 7. Windows 7 and drivers of ScanJet 300 scanner are not complianted.

    Hi @Per-Morten 
    I suspect your question would be better answered in the HP Enterprise Business Community, as your HP Printer is a commercial model.
    My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
    Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
    You may find the HP Scanjet 5400c Scanner Drivers page helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
    Best of luck.
      - In support of Movember
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • How can I copy multiple slides with a HP Scanjet 4050 to photoes using Maverick? HP apparently no longer supports this product for this OS.

    How can I copy multiple slides with a HP Scanjet 4050 to photoes using Maverick? HP apparently no longer supports this product for OS Maverick.

    VueScan
    VueScan FAQ

  • Is it possible to set up a HP Scanjet 8200 series (8290 with ADF) Intel Mac

    Is it possible to set up a HP Scanjet 8200 series (8290 with automatic document feeder) on the new Intel based Mac Pro desktop computer (nehalem 2.93 dual processors, 8 core)? Can anyone please steer me in the right direction -- I tried one of the drivers from the HP website and the install reflected that it does not work on intel based computers. Does OS X Leopard come with some type of utility to help me set up the scanner (I don't see where to set it up)? Thanks.

    Hi Nicky,
    Yes,  you can download and install the software.  Yay!
    HP Deskjet 3050A e-All-in-One Printer series - J611
    Select your printer from the list ...
    Find and open the pdf document titled:
    Install Full Feature Software - Printer
    Good Luck!
    Click the Kudos Star!
    It is a great “Thank You” for the Experts who offer to help!
    Kind Regards,
    Dragon-Fur

  • Scanjet G4050- How to scan multiple slides at one time with Image Capture

    Using Scanjet G4050 with Mac and OS 10.6.  Thus using Image Capture to control scanner.  When using the slide template for 16 slides, Image Capture only allows me to select one slide at a time. 
    Is there a way to fill the template with 16 slides and have Image Capture scan all 16 slides without having to select each one in turn?  It is a real pain to have to direct each scan.

    Hi jpbear
    I am going to take credit for finding the solution that the HP Photo Suite from OSX 5 works in subsequent Mac OSX. Look at this web page.
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4019&lc=en&cc=us&dlc=en&sw_lang=&product=3236...
    If this doesn't work for you, I am willing to guide you to finding the page. I downloaded a copy a few minutes ago and it was still available. The Photo Suite is actually an amazing set of applications but the one you want to use with your HP ScanJet  G4050 is HP Scan Pro. I continue to use it with OSX 9 but other people have reported that it continues to work with OSX 10 as well. It allows me to scan the 16 slides on the bed individually with one pass. It also has some colour balancing function.
    Frangelica

  • *SOLUTION* to (at least some) "HP Scanjet Pro" problems in 10.6

    Good day to everyone!
    I have found a workaround for the problems experienced by people attempting to use HP Scanjet scanners (at least the 4850, which is what I use, I suspect greatly this will work for others as well).
    Basically it is to install the earlier driver posted on HP's bewildering website.
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us &prodNameId=447374&prodTypeId=15179&prodSeriesId=447373&swLang=8&taskId=135&swEn vOID=219
    They have a "driver" section above the "software" section that basically contains an earlier version of the Scan Pro software and Universal Driver for it. It's listed for Mac OS 10.3 - 10.4 only, however I can verify that it works correctly on my 10.6 install.
    In fact, unbeknown to me, that had actually been the driver I'd been using all along in Mac OS 10.5 (I guess I upgraded when they made the initial universal binary for Mac OS 10.4 and never upgraded from that).
    Anyway, for my HP Scanjet 4850, it works fine.

    Good day to everyone!
    I have found a workaround for the problems experienced by people attempting to use HP Scanjet scanners (at least the 4850, which is what I use, I suspect greatly this will work for others as well).
    Basically it is to install the earlier driver posted on HP's bewildering website.
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us &prodNameId=447374&prodTypeId=15179&prodSeriesId=447373&swLang=8&taskId=135&swEn vOID=219
    They have a "driver" section above the "software" section that basically contains an earlier version of the Scan Pro software and Universal Driver for it. It's listed for Mac OS 10.3 - 10.4 only, however I can verify that it works correctly on my 10.6 install.
    In fact, unbeknown to me, that had actually been the driver I'd been using all along in Mac OS 10.5 (I guess I upgraded when they made the initial universal binary for Mac OS 10.4 and never upgraded from that).
    Anyway, for my HP Scanjet 4850, it works fine.

  • Scanjet G4050 and driver 1.3.0 + Mac OSX 10.9.4

    I recently returned to the combination Vuescan/Scanjet G4050 for the first ime since March this year (after scanning several thousand negs) and found it no longer worked properly. Vuescan no longer recognised the transparancy capabilities of the scanner, but flatbed scans were OK.
    I decided to update to the latest driver 1.3.0.
    Now on startup the scanner makes an extra noise (a long whine) for ca 30 seconds and the indicator light then flashes (for ever?) turning it off and back on again returns it to a normal standby.
    But now Vuescan hangs on startup, or sometimes suceeds on opening but will not respond to scan requests. The scanner sort of works with Image Capture through System Preferences but it is very slow and the images are posterized.
    Vuescan is working perfectly with my other scanner, and I have even tried earlier versions of it with this driver with the same results.
    THe HP utility is also crashing now and the uninstall program sees nothing.
    I have been advised by Ed Hamrick at Vuescan to use the 32 bit version of the program to sidestep this. That hasn't worked yet... will try a complete restart but i'm sending this whatever the result as there seems to be something wrong with this driver...
    Utility crash report:
    https://www.dropbox.com/s/brma1ymqflzdte3/HP%20Utiliy%20crash%20report.txt?dl=0
    Recent crashes and spins:
    https://www.dropbox.com/sh/2v5vngsyk6yqtar/AABCUy1UKD-wzcSVtvACgYaMa?dl=0

    OK, using the 32 bit version of Vuescan worked with this driver, even if it behaved differently (scans twice) and the scanner is still behaving oddly at start-up (30 second whine then straight into energy save mode) 

  • Can't find driver for Scanjet G2410 on OS 10.7

    Hello.
    I have just bought a Scanjet G2410.
    When I first ran the installation CD, the instalation compleete with the following message:
    "L’extension système «/System/Library/Extensions/hpPlugInInit.kext » n’a pas été installé correctement et ne peut être utilisé. Essayez de le réinstaller ou adressez-vous à votre revendeur pour une mise à jour"
    And when I tried to scan something I got the message:
    "Scanner could not be initialised, scanner not found"
    So I tried to uninstall and reinstall the appropriate drivers,
    But I cannot find a driver for my 10.7 version on Mac OS.
    There are only drivers for 10.5 or 10.9.
    Can you help me please ?
    Thank you
    Paul
    This question was solved.
    View Solution.

    Hi Paul,
    Follow the steps below and let me know if that helps:
    Step one: Remove existing HP Scanjet software
    1.Go to the Dock, click the Applications folder, and then click the Hewlett-Packard folder.
    2.Click the HP Uninstaller icon.
    3.Click Continue.
    4.Select your scanner model and click Uninstall .
    5.Click OK to complete the uninstall process.
    Step two: Repair the disc permissions to avoid any possible conflicts
    1. Open the the Applications folder.
    2. Go to the Utilities folder.
    3. Double-click on Disk Utility.
    4. Select the hard drive containing the boot volume.
    5. Go to the First Aid tab and select Repair Disk Permissions.
    Note: This process may take several minutes depending on the Mac and amount of permissions that need to be repaired. The Progress Log will indicate when the process has been completed.
    Step three: Install HP full feature software for OS X 10.6 (Snow leopard)
    Download and install the latest software for OS X 10.6 from the following link:
    http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=3423841&swItemId=sj_78355_5&swEnvOid=219
    Step four: Install HP Scanjet update for OS X 10.7 (Lion)
    Download and install the update below to ensure the update below:
    http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=3423841&swItemId=cs_97791_1&swEnvOid=219#...
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HP ScanJet 6200C with Windows Vista

    Hey All,
    I have an old HP6200C ScanJet scanner and unfortunately it is too old to adapt to my WindowsVista OS.  Can anyone help me with a "workaround" so I can scan some old slides and digitize them?
    Thanks,
    This question was solved.
    View Solution.

    Hello scanjet6200c,
    Welcome to the HP Support Forums!
    Unfortunately, I have been only able to find a document linking to 3rd party software. I hope one of this options works for you.
    Third-party scan software solutions<---
    Best of luck.
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • HP Scanjet G4050 in Windows 7 (64 bit) Error specification 4,[(2,0,8004154),(0,0,0),(3,56,0)]

    HP Scanjet G4050 does not get well installed in Windows 7 (64 bit).
    Running the programme "HP Print and Scan Doctor". Result: Errors translated for you from Dutch, so I do not have the original error formulation:
    Device control: correct
    Warning in Control Driverprogramme "There is no communication between the driver and the device. 
    Windows (WIA)-scan: correct
    Warning in HP Twain Scan Error specification 4,[(2,0,8004154),(0,0,0),(3,56,0)]
    Register: correct
    Warning in HP Scan Flow Manager: part of the software is not installed. Uninstalling (even deep uninstalling) and reinstallation of the drivers and software does not change the results.
    Prepanel testing: Everything is allright with your scanner ,although not all tests could be performed.
    You can scan with Microsoft Paint.
    In addition:
    Firewall off - did not help.
    Deep uninstallation and reinstallation: did not help.
    Is there anybody with an idea about how to identify and obtain the missing elements in my downloads?

    In addition:
    When checking the installed files, there is nothing called "SolutionCenter".

  • HP Scanjet 5000 and Windows 7

    Hi - I have an HP Scanjet 5000, running through a TP-LINK TL-310u MFP & Print Server installed on a Windows XP machine and it works perfectly apart from the fact the user complains about the PC slowing down whenever anyone Scans a document.
    So I'm trying to move it onto a Windows 7 machine. And it's *almost* working. From the Windows 7 PC I can quite happily select a users profile (all our users have a profile set with a destination unique to them) and scan a document and it's put in the correct place. However, our users like to scan from the scanner itself by selecting their profile on the LCD and pressing one of the buttons. This is the bit that doesn't work. 
    I've checked in Devices & Printers -> Scan Properties -> Events and the scan button is set to 'HP Scan Dispatch 3' Not sure if this is correct (other options are 'HP Scanjet 5000 - Scanner Tools Utility') but the other option doesn't work and furthermore stops me being able to scan using profiles from the PC.
    In the utility, 'Disable front Panel Buttons' is NOT ticked.
    When I connect it back to the Windows XP PC it works straightaway, so I think it's something to do with Windows 7. 
    Help!
    Tony McMahon

    I've taken the TP-Link device out of the loop now, and connected directly via USB. I'm still experiencing the same issue - can scan from within the software, but the buttons don't do anything.
    It seems to be something to do with the 'HP Scan Dispatch 3' that in the registry is set to use:
    C:\Program Files (x86)\Common Files\Hewlett-Packard\Scanjet\5000 (L2715A)\hpScanDispatch3.exe Scan# /StiDevice:%1 /StiEvent:%2;
    I don't know what the parameters are supposed to be, but this program simply isn't launching. The other option available under 'Events' from 'Devices & Printers', does start the Scan Utility program, but this isn't the behaviour I'm after - it should perform the scan and save the pdf in the destination without any user intervention.
    Any help gratefully received, hopefully whilst I still have some hair left...

  • HP Scanjet G4050 won't scan negatives or or individual pictures Windows 8.1

    I have an HP Scanjet G4050 that will not scan negatives or individual pictures.  It worked great with my Windows XP.

    Hi,
    Please try for Windows 8:
      HP Scanjet G4050 Photo Scanner
    Otherwise, well - use a computer with older Operating system to scan.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP Scanjet G4050 won't scan negatives or individual pictures Windows 8.1

    I have posted recently, but I can't find it.  I have MANY times tried to download everything I can find for my scanjet and it won't work.  Then it said to uninstall completly and start again.  I cannot uninstall it completely.  Now there are drivers missing and such.  I appreciate the persons who have tried to help, but I still need help or go and spend another $40.  My notebook is an HP and so are my all-in-one eStation and scanjet.

    Hi @Jiggerjo 
    I would like to help you with the scanning troubles you are having. Please try the following steps;
    Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
    Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
    Uninstall the software again - Uninstalling the Software Instructions
    When the uninstall has completed restart the computer
    Follow these steps to reset the registry settings and options for Windows Installer.
    Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
    In the Open box, type msiexec /unregister, and then click OK.
    Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
    In the Open box, type msiexec /regserver, and then click OK
     *Note: there is a space between the c and the /
    If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
    Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
    Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayer/downloads.html
    Restart the computer
    Download and install the software for your Scanjet again. HP Scanjet G4050 Photo Scanner Drivers
    You mentioned, you have posted recently and can't find it, use the following link to find all of your previous posts; Latest Posts by Jiggerjo
    I hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

Maybe you are looking for