Scanned docs - Very fuzzy, not clear

I've never seen this before.  The document is created using a flatbed scanner.  The original is all text.  On one particular computer the text is unreadable in Reader.  The file opens, but the image is so fuzzy you can't read it.  The text looks like the resolution was blown up so much that all you see are the dots that make up the image.
I've tried 3 other computers, and all can view the doc with no problem.  All are XP Pro.  All have the latest version of Reader.
I tried uninstalling and re-installing Reader, even removing anything Adobe related from the Registry.
I compared settings in the non-working computer with one that works, both are the same.
Any idea what the problem is?

Actually, I did.  It's the lastest version.  9.something.
The problem PC started out with 7.something.  That didn't work so I uninstalled it and installed 9.something.  That didn't work, so I un-installed it again, and removed all instances of anything "adobe" from the Windows registry.  Then re-installed the latest version from Adobe, ran it, and got an update from Adobe.  Same problem.  I thought it might be somehow (though unlikely) hardware related.  But I can RDP into a server from this PC, and open the same PDF, and it views fine.  So it isn't a hardware issue.
I've compared settings, and don't see any difference.  A very unusual problem.

Similar Messages

  • Was on facebook and screen suddenly changed to very small print and fuzzy not clear, so I switched to another browser and it was ok on there

    while scrolling thru my facebook page. The screen suddenly changed to very small print and blurred / fuzzy not clear. The whole page had changed the way it was showing. So I tried another browser and facebook page was working fine. Went back to firefox and still had issues.

    Reset the page zoom on pages that cause problems.
    *<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
    *http://kb.mozillazine.org/Zoom_text_of_web_pages

  • Canon MF8580Cdw Scan size huge and not clear,

    I need to scan a document that's 45 pages front and back and I need a CLEAR plain black and white text quality scan that isn't enormous!

    Any shimmering is NOT related to resetting the printing system. You may have other issues. Check with VueScan, perhaps there is an update you need. I am assuming after resetting the printing system you re-installed the printer and scanner and tested.
    I would suggest running EtreCheck, I'd like to see how your system is configured to see if I see anything obvious you haven't mentioned yet. You can get EtreCheck by clicking: http://www.etresoft.com/etrecheck

  • I have an iPad. Why is it not easy to find "log in" and also to be able to see the balance remaining in the account , once a gift card has been redeemed ? It is very clumsy, not clear which site to be in even!

    I have an iPad, iPhone and MacBook.
    Can someone please explain where to first of all go (which website) to find "Log In". I seem to do this only by accidentally finding it - going from site to site or page to page. Not sure which. Today, all I wanted to do was look at my account to see how much was left in my account of a gift card I redeemed. I think I am still unsure of the relationship "iTunes" has to products I buy for any device. I thought that I just needed to go to www.iTunes.ca and look for a sign in link. I thought that this account is my sole apple account for any product for any device. Obviously I am not as intuitive as Apple. Help.

    You can't log into any site and see your account's balance. You can log into your account on your iPad via Settings > iTunes & App Store - on my iOS devices my balance shows at the bottom of, for example, the Featured tab in the App Store app under my account id (or you can view your account via Settings > iTunes & App Stores and it should show on the screen that you are taken to). You may not see anything if your account's balance is zero.
    Not sure what you mean by relationship iTunes has to products. You can buy music, films, TV shows, audiobooks via the iTunes app on your iPad, and apps via the App Store app - what you buy will be tied to your iTunes account.

  • Fuzzy\Not clear text?

    Hello all,
        I have just started using Edge (coming from flash) and I can't help but think the text looks fuzzy.
    Is there someting I am doing wrong?
    Thanks
    Craig

    Are you talking about text created in Edge or text imported in png or other graphic files? As far as I am concerned, text created in Edge looks fine. Text in png files - depends how you create them and save them.

  • While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?

    While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?

     Thanks for answering. The version is XI.0.10. I just did the update yesterday hoping that I could now properly edit a scanned pdf document. Yes, it's happening on most all scanned documents. I followed your steps & found the list of fonts used in the document & then attempted to edit. The same occurs. When I type in a correction, I get an error alert... "the original font (in this case Fd 5805) is not available or can't be used in editing. Acrobat is using the font Minion Pro in its place." 
    When I select the text & right click as you suggested, my only choices are cut, copy, delete or select all, no "edit text".
    I have no other options to choose another font. Thanks for any help you can direct my way. 
    Debbie
          From: sukritd15 <[email protected]>
    To: Deborah Karr <[email protected]>
    Sent: Friday, February 13, 2015 5:35 AM
    Subject:  While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?
    While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?
    created by sukritd15 in Creating, Editing & Exporting PDFs - View the full discussionHi Deborah , I would like to know couple of things before I assist you further.1.Which version of Acrobat are you using ?2.Is it happening for all the scanned PDF' or any particular PDF? You can try these steps,Launch the scanned PDF >right click >Document Properties(from the drop down list) >Fonts(on the dialog box)>From here you will get the fonts used in that PDF . While editing the PDF ,select the text that are editing or typing in with the help of selection tool .After you select the text ,right click on the text and choose "edit text" from the drop down list .From there you will be able to choose the desired font . RegardsSukrit Dhingra If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7190881#7190881 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7190881#7190881 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Creating, Editing & Exporting PDFs by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • VF11 wrongly created with RV Doc type and with not clear status.

    Hi All
    Issue: There are 2 billing documents which were created(VF01) in March are canceled (VF11) in May. Cancel document is saved with a message (No automatic clearing of billing document XXXXXXXXX) and message diagnosis saying that u201CThe Automatic clearing of billing document and reversal is not possible. This may be, for example, because the line item update is deactivatedu201D
      In the SD document flow cancel billing document is created and it's posted to accounting with Document type RV(which is not configured in the billing  types) and it is in not clear status.
    2 Sales order types are ZNRC(No Rebate u2013 Credit)    second is ZCR (CM Req With Refer).
    Order Type  : ZNRC , Billing type :ZG2, Cancel billing type :Z5, Accounting document in billing type for ZG2: is DG and accounting document in cancel billing type Z5 is :(_) blank.
    Order type:  ZCR Billing type :G2, Cancel billing type :S2, Accounting document in billing type for G2: is DG and accounting document in cancel billing type S2 is :(_) blank.                                                
          FI document type Not maintained in the cancel billing type configuration because this should be determine by reversal document type DA which is maintained in DG document type from FI side. It will be triggered in VF11)
    The above configuration is working with the order created VA01,billing VF01 and cancelling VF11 done in same period. If the order and billing done in old period and canceling(VF11) done in current period than FI document creating with RV document type and with not clear status in the document flow.
    I reviewed similar issues with SAP Note and with below explanation:
              "There are 2 procedures that are possible when Vf11 is posted.
              Old Procedure - An FI "Reversal" document was created that was not connected with the orignal.
              New Procedure - A Real FI reversal was carried out with clearing."
    In this case, our system is following with new procedure except above mentioned orders created in previous period and and canceled in current period.
      My Questions are: How the RV document is getting triggered here? why the cancel document (Reversal FI Doc) is not clearing?
         Appreciate your answers or suggestions.
    Thanks in advance,
    Sunil
    Edited by: Sunil kumar Matta on Jun 9, 2011 3:40 PM

    Thank you Ivano.
      I referred SAP note 1259505 and 339928. But initially we thought of none of the symptoms mentioned in the SAP note are matching with our issue. Then we contacted SAP online support and they suggested checking one SAP note (Mentioned above).
      Our system is following new cancellation procedure, but itu2019s failing only for some few documents.
      Finally we identified several reasons for the issue. One is profitability segment in the billing document and cancelled document is different due to some changes in segment assignments. Another one is consolidation- consolidation document does not exist in the billing document list but it is getting created in Canceled document (VF11).(Consolidation postings are switched off some time back and now itu2019s on)
      After some discussions it is decided to include accounting document type (Reversal) in cancel billing types to avoid default RV document type in canceled billing document accounting document. And non-cleared documents need to be created manually in F-32.
      Thread is closed.
    Sunil

  • Payment run  - should not clear the open item but should post payment doc

    Hi Gurus,
    Can you please help me , on how to acheive like when payment run F110 post the payment doc it should not close the open item rather keep that open item as open item , but hsould be be paid by payment doc posted through payment run F110.
    Have any one of you had similar requirement ..? FICO gurus help me to acheiev this .. any exit /BADI ..or ideas..
    Appreciate your help in advance

    HI ,
    Thanks for your reply , but still I am not clear on that.
    reason they want to keep this open to be kept as open item , so that item will be picked up by dunning run ..
    Basically  the open invoice is being cleared by payment doc which was generated by payment run. If we look at BSEG in the open item record BSEG-AUGBL = will have the clearing doc number , and in addition to that BSEG will have created another record for the clearing doc as well .
    May be since open invoice record is being updated with clearing doc (AUGBL ) , I belive its not shown up as open item .
    Somehow this item should be kept as open item ... that is the req and also paid item payment reference should be transfered to Bill of exchange as well.
    Hope you have clear background of my req...
    Tnanks in advance ,

  • Down payment doc not cleared in Payment Run F110

    Dear Friends,
    Document 1700000043 is a reversal of down payment which should be settle with final invoice 5400212994. Both documents have the same due date, but only 5400212994 was cleared with a payment run.
    Please can anybody clarify why document 1700000043 was not cleared with a payment run.
    I checked in Exception list and found error message as "No Payment possible because Items with a debit balance still exists; see job log"
    User follow the below process:
    1) Downpayment made as below on 08.10.2009
    Vendor                                   29.000,00
    LC El PaymClrng Ac               34.510,00-
    Payables Tax Input                  5.510,00
    1) GR posgted on 26.11.2009
                Engineering Service   41.700,00
                GR/IR - Services         41.700,00-                          
    3) IR posted on 26.11.2009 and Net due date 23.12.2009
             Vendor                           49.623,00-
              GR/IR                              41.700,00
              Payables Tax Input           7.923,00
    4) Downpayment Reversal on 26.11.2009
          Vendor (PK 39)                 29.000,00-
           Venfor (PK 26)                34.510,00
           Payables Tax Input           5.510,00-
    Please check above process and let me know if any details are needed for further.
    Thanks,
    Venkat

    HI Venkat,
    Sorry Venkat. It is the clarance in F-54 not the Revesal.
    After clearance, the amount 29.000,00 is posted to Vendor Spl GL. So nullified this account.
    Once cleared, the amount is posted to Normal Vendor ac as 34.510,00 (Doc 1700000043)
    So this doc is not picked in Payment Run.
    Invoice amount is 49.623,00-.  So the difference 15113 (49.623,00-34.510,00) should be cleared in Payment run. It is not done.
    My assumption is there is the amount difference between Normal Vendor to Speial Vendor (34,510 - 29000).  Is it the cause to not picked the doc 1700000043 in payment run.
    Please advise what I can do?
    Thanks
    Venkat

  • Accounting Doc. not cleared...

    dear all,
    Once invoice has been done and released to accounting, we can see the status of INVOICE as completed in DOC. FLOW. After that iam getting the Accounting doc. as "not cleared" in the document flow. What it is actually referring about....as we have not maintained any Blocks.
    Why this acoounting doc. has not been cleared....help me out. what could be the possibilities.
    Rewarded if helpful
    thnax
    Krishna chaitanya

    Krishna after the FI transaction F-28 payments get cleared from finance department.
    then again go to document flow of invoice and see you will now see that yopur document is showing no error message.
    please check and reward point if the problem got solved.
    Regards,
    sameer.

  • Officejet Pro L7555 - Scanned docs are not being saved to hard drive.

    I've uninstalled & reinstalled the new HP/Windows 7 compatible software twice and I still can't get scanned docs to save to the hard drive. The scanning process looks like it's going thru all the steps. Even asking where I want to save the file. Unfortunately, no matter where I save it, there's nothing there. I even selected the 'pic to email' option but it won't send the file to my Outlook email program either. HELP!
    This question was solved.
    View Solution.

    I found a solution that worked for me on the topic "Windows 7 & 7310" . Below is the solution:
    HP have created a new workaround to make it easier to fix this problem.
    All you need to do now is go to the ftp site listed below and download and run the exe file.
    This exe will recognize the version of the OS you are running and put the dll in the correct place.
    ftp://ftp.hp.com/pub/printers/scanbh
    Download this file
    CPEScanPatch_hpcom_000_001.exe
    Thanks, if you have any problems please report them to the forums so we can try to help you out.
    JonW
    Though I work for HP, My posts express MY opinion, and not those of HP.

  • Window pops up stating"browser error" when trying to access documents using google doc's. Holding shift key and refresh does not clear window. What's next?

    Shut down and restarted computer, "browser error" still pops up when trying to access documents using Google doc's.
    Holding shift key and clicking refresh does not clear window.
    What else can be done to clear the window and gain access to my documents?

    Hi,
    Found a note explaining the significance of these errors.
    It says:
    "NZE-28862: SSL connection failed
    Cause: This error occurred because the peer closed the connection.
    Action: Enable Oracle Net tracing on both sides and examine the trace output. Contact Oracle Customer support with the trace output."
    For further details you may refer the Note: 244527.1 - Explanation of "SSL call to NZ function nzos_Handshake failed" error codes
    Thanks & Regards,
    Sindhiya V.

  • MR11 Write-Offs (KP doc type) not clearing

    A maintenance adjustment transaction (MR11) was executed to 'write-off' the open receipts on a purchase order.  All  purchase order items have the same accounting (Profit Center, GL Acct, Comp Code).  The MR11 transaction creates a KP (account maintenance document) which is posted against the PO line and is cleared against the receipt accounting document(s).
    A clearing document should be created to offset the receipt/invoice document with the maintenance document. 
    For some reason,  part of the items that were 'maintenanced' on the PO did not get cleared, while other items did get cleared.  Our internal  SAP GL super users have reviewed the documents and cannot understand why some of these did not clear.
    Thoughts?

    Hi
    Please check whether there are "quantity differences" in those POs. If not, then MR11 will not do. Also please check whether the account assignment of those POs are "order". If so, settlement is the way forward to close the PO.
    Jayaram

  • VF02- Billing doc not cleared

    Hi Gurus,
    I have raised a sales order and got the following document flow:
    - Sales order - Completed
    - Delivery + PGI - Completed
    - Billing - Invoicing done + FI Document has been created
    But I have the following message in Billing: Accounting document  not cleared
    What does that mean?
    What do I need to do to clear the document?
    Regards
    Chris

    Accounting document not cleared
    In standard, once you save a billing document, system will never pop up the above error message.  In few cases, system will pop up "Accounting document not generated".
    The moment you save a billing document in SD, immediately an accounting document will also be created in the background and both the status would be "Not cleared" in the initial stage.  Once the customer effected payment, FI people will update the incoming payment via F-28.  Once they complete this updation, in the document flow, system will show "Cleared".
    thanks
    G. Lakshmipathi

  • PO doc. not clear due to po block

    Dear SAP Gurus,
    After run the F.13 few GRIR not clear yet and these grir's PO are still showing in F.19. Then I noticed that these PO are blocked by the user.
    1st I unblock the PO, then run the MR11 against the PO no. After that the PO no. is not showing in F.19 and these are appearing in F.13 .
    Now the question is that if I follow the procedure to clear the documents, is it right as per SAP standard? There will any effect in future at the time of year end from MM as well as the FI side? 
    Thanks in advance.

    Hi,
    So is it mandatory to run MR11 before F.13.Can you tell me the reason may happen for that the PO is not clear.
    Manually I unblocked the PO, then it not appear in F.13. After MR11 it is coming in F.13 My user is saying that it is not possible to run every time MR11 before F.13
    Sourav

Maybe you are looking for