Scanned documents do not print out correctly on forms.

I scanned a pdf file to my computer. I opened the pdf file on my computer using Adobe Reader. I printed the file using my printer. The pdf file did not print out correctly. The printed text was out of alignment with the form I was printing on. The printer/scanner manufacturer troubleshot the problem and determined it is not a hardware issue, but an Adobe Reader software issue. Please help. Thank you.

Yes, the scanned PDF size is the same as the paper size in my printer. Everything worked fine for the past year. The only thing I had changed was I purchased a new wireless HP printer/scanner. Before, I was using an USB cable. While troubleshooting my issues, I have somehow caused Adobe Reader X to quit working. I cannot open any PDF files. I get a message about system configuration is not compatiable.

Similar Messages

Pages are not printing out correctly. I have tried to fix in the options, with no luck. It prints out with spaces in between the letters.

When I go to print any page from an email, webpage, pdf file..the pages print out very wide fonts to the point where it is unreadable. I have tried to fix in the options with no luck. I can provide you with visuals if you need me to.

Thanks very much! It works! The print / review print - print works like it is supposed to. The print is corrected and works great. Thanks again.

Deskjet 2540 Scanning A4 Documents but not printing out as a A4 Document

Model Number-SNPRB-1204-02
I am scanning a A4 document then printing it straight off the copier but after the printing has stopped their is a15mm edge missing off the printed document either the Top or the Bottom depending how you place it on the glass.I have made sure that the setting is on A4 size to scan and copy i have even put the setting on entire scan area but this makes no difference.I have cleaned-Ink Cartridges-Printer,and aligned ink cartridges as well.I am running Windows 7 64 bit

Hi LFC58,
Thanks for that.
In that case, it is possible that your product needs a firmware update or a replacement.
I encourage you to call support by going to this link so they can assist you with that.
Thanks!
IdleHands
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.
Regards,
IdleHands
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

I am having trouble printing I have a connection to my printer wirelessly but does not print out the correct page I want.When I do print I get a bunch of pages more than is needed and also get a code and symbols please help I am jammed at work

I am having trouble printing I have a connection to my printer wirelessly but does not print out the correct page I want.When I do print I get a bunch of pages more than is needed and also get a code and symbols please help I am jammed at work

This can be the result of selecting the wrong driver. An older, unsupported laser printer will sometimes work with the generic Postscript driver.

Document edits not printing

Afternoon All,
Supporting a user using Acrobat 9.0 (Standard / Professional etc. unknown but this can be found out) who has received a PDF as an attachment in an email. When she opens it, the edits that were made by a previous user to the document show in the document. When she goes to print it, the preview does not show the edits, and if she prints it out, the edits do not print. This is not the same for all the documents she receives, some are fine, and the edits show up in the preview and print out correctly). They are all created by the same user and therefore software. There are 3 other users who receive the same email (they are all cc'd on the same email) and they all have the same symptoms. It is believed they are all using the same version of Acrobat.
Can anybody put a suggestion forward as to why some would be OK, and others not?

It will remain in the PDF, but is not part of the document. That is why they have the selection of document and markup for printing. If you are sending the PDF to others, that leads ot a problem of telling the reader how to print the document and markup. The flatten is under the tools>print production as I recall (sorry, at the wrong computer to give the full answer).

Adobr Reader XI: document will not print: premium presentation paper

I've had no problems with this before today. Adobe Reader XI gives me an error message that "document will not print". I tried it in draft, plain paper, and it printed, without a problem. I switched browsers, from Google Chrome, redownloaded the document (online labels) into IE8, then tried to reprint as premuim presentation paper, matte, color. Same error message. Yet, as a draft, no problem. I've uninstalled, reinstalled, updated drivers on Epson printer (WF2530), same error message. AShould I do a system restore to two days ago, since this is the last time there was no problem? I print product labels.

Thanks Atul,
Th problem has recently been resolved when my new technician made some adjustmnents. The problem was not the fault of Acrobat. It goes back to my new high definition IPS monitor several weeks earlier. When using Windows Office 2007 I was seeeing green haloes mainly between letters such as" ll, ii, db" etc. where the vertical lines filled with green. In Adobe Bridge, the variable text in control boxes took on a red colour. My technician (at the time) sought help via the Microsoft Help site and found this was a common problem with professional high definition IPS monitors like my new one. The instructions (4 pages from the Microsoft site) said to turn off the Clear Text Type and replace the font 'SEGOE' with Tahoma. As the technician workede his way through the steps, I watched as he marked them off as he went so as to ensure the changes were correctly made. This solved the problem but it wasn't until a week later when I tried to print a PDF file that my problems with Acrobat began. The PC was taken to another technican fora "second opinion" and this man fixed the problem within a short time by changing the font back to the Windows default, SEGOE. He may have done something else but when I saw the printer dialog panel on his workbench with no other problems either, I was anxious to try it with my new monitor. No more colour fringing/haloes etc and no further problems with Acrobat However, I was waiting a little longer before informing you of the outcome-just in case it didn't work.
It seems that Microsoft may be incorrect in their 'Fix' advice as the font SEGO may well be required for Acrobat to print a PDF file?
This case may now be closed with thanks for trying to help with a problem that in the end turned out to not your fault
Bob

CR10 Exported MS word doc file not print out

My application (CR10, VB6, Oracle10.2) exports MS word doc file to disk, But when I try to print out, not print out at some printer and print out legal size (8.5x14) at some printer. It set up as Letter (8.5x11) I think in CR, page footer is wrong place. How I can change page footer location to move up in the report?
one more thing...
When I try to open this MS doc file, always prompt pop up and ask "You want to convert to RTF?" I don't understand.
Thank you.

Sachiko,
You might want to try exporting to MS Word from within the Crystal Reports Deisgner and see if you get the same behaviour. If it appears correctly from the Designer then it would suggest an issue with the coding in your application and the issue would be better answered in the BO SDK Application Development forums.
I think the footer is in the wrong place due to the incorrect paper size and don't believe that any formatting of the report itself will correct it.

How do I make the answer boxes not print out solid black?

Does anyone know how to change the settings on the Form so that the boxes do not print out solid black?

Hello Paci,
How exactly did you create the form? And is the signed document received through EchoSign showing the boxes as black in PDF itself or are they shown when you take the print out of it?
Regards,
-Rijul

HP Officejet 6000 Wireless - Does not print black correctly.

HP Officejet 6000 Wireless - Does not print black correctly.
Previously the printer was printing fine.
This evening I printed a diagram I made in MS PowerPoint. The diagram contained black and red text along with black, red, and blue lines. When I took the printed page from the printer, all the black items looked faded. Instead of black, they printed as a light, faded gray. The red and blue printed correctly.
Another user of the printer printed some documents around the same time. These documents had nothing but black text. Every page this user printed showed up completely blank. The black was not even faded. There were no signs of anything being printed on the pages at all.
It seemed strange that one print job would print faded black and the other printed nothing. Considering the possibility that the ink was low, a new black cartridge was placed into the printer. The exact same results occured. My diagram printed correctly except for the fact that the things that were supposed to be black were coming up as light gray. Once again, the documents printed by the other user came up completely blank.
I ran a print test on the printer. It printed a Windows logo with the word "Windows" below. The logo printed correctly. The text showed up as a light, faded gray.
A third user printed an Excel spreadsheet. The cell borders were printed as a light gray. Nothing else printed. Everything in the spreadsheet was supposed to be black.
The third user also printed a recipe from MS Word. Most of the text showed up as a light, faded gray. Some text did not show up at all. I could not see any correlation between what showed up in faded gray and what did not show up.
It seems to me that if something was wrong with the cartridges, it would either always be faded or not print at all. I can consistently get some things to print faded and other things to not print at all. Color always prints correctly.
The print jobs were sent to the printer wirelessly from three different computers. Two computers run Windows 7 (x64). The third computer runs Windows XP SP2.
As far as I can tell, nothing was changed or done differently between now and the last time something printed correctly.
Might this be a driver issue? Since the printing consistently prints one way for certain files and another way for other files, I don't see it as being caused by hardware. If it's not a software issue, what could possibly cause the effects I described above?

This article should help resolve your partial/blank pages:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01892627&cc=us&dlc=en&lc=en
Give the steps listed under your operating system a try and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Invoice number and document number not printed in payment advice

Hello Gurus,
I am executing reprint check through transaction fch7, In that Invoice number and document number not printed in payment advice. I have created zscript for that and also assinged regup-belnr and regup-xblnr and used standard program RFFOUS_C.
other fields from regup table are displayed but above two mentioned fields are not displayed.
I even tried debugging standard RFFOUS_C prog, in that regup-belnr and regup-xblnr are coming but it is not printed on form.
With regards,
Vikram

Hi,
Debug you Zscript and check the invoice no and document no. Have assigned that script in FBZP..? check the which form is calling FCH7 in debugger mode..?
Rgds
Aeda.

OS Windows Vista Ultimate - HP LAser Jet 1000 - Firefox will not print out internet page etc...

OS Windows Vista Ultimate - HP Laser Jet 1000 - Firefox will not print out internet page etc...
That simple, find an page you want to print, hit the print button and zero zip zlich.
Works just fine with IE?????

See this: <br />
http://kb.mozillazine.org/Problems_printing_web_pages

PDF files that do not print out on paper but are OK on screen

Print PDF files when produced in ADOBE XI from Excel 2010 worksheets
The PDF files appear ok on the screen but do not print out all of the text on paper.
Formating is recognised and printed oK but not text.
Font segoe UI size 9 point - colours used default, blue and brown. What little that is printed shows all colours OK but not all body of text
This problem has been reported to me from dozens of my Clients and I have the same problem when printing hardcopy.
Can anybody help ?

I tried a font change on an abstracted part of the original file. I selected Ariel - the majority of the page printed - headers and footers partialy printed. But it is a step forward thank you.
My choice of Font Segoe UI (True type) font as a default was after reading an article which stated that Segoe and another font, were fast becoming a "Microsoft computer standard font".
A further question falls out of my problem is why is there no problem when a client of mine converted the original Excel Workbook with Adobe 9 and had no such problem ?.
I do not have ADOBE 9 and cannot test it myself - but why should it work with an older version of ADOBE ?

Can not print out good quality pictures in Photoshop CS4...

Hi,
I can not print out good quality photos from my printer. Photos are dark and colors are not good either. I have Windows XP, Photoshop CS4 and printer Epson R800 . I have been trying to find out what are the right settings on the computer, printer and in the software and spent hours on the computer not able to sort out this.
Many thanks before hand,
Anna

Same answer as on a million otehr such thereads: Read up on color management, reset your monitor settings and profile, reset your printer settings and profile, calibrate.
Mylenium

How can I disable the "this PDF document might not be displayed correctly" notification?

Almost all PDF files produce the "this PDF document might not be displayed correctly" message when viewed with the built-in PDF viewer.
This message does not convey useful information. It appears on almost all PDF files (even though they usually work correctly after all); it sometimes fails to appear even on files that don't work (so it does not accurately predict whether a given file will work); when a file doesn't work, there is no way to make it work short of using an external viewer (so the error I'm being warned about is not something I can fix); and it demands a user action to dismiss it EVERY TIME it appears (so it places a disproportionate demand on my attention). How can I disable it?
Please note that I am not looking for instructions on how to disable the built-in PDF viewer. I just want to turn off the warning message.

The only way to stop this message is to disable the built-in PDF Viewer and use another viewer.<br />
On Linux you only have an older version of the Adobe Reader available, so you may have to open the PDF files in an external viewer like evince.
You can set the pdfjs.disabled pref to true on the <b>about:config</b> page to disable the build-in PDF viewer.
You can check the value of the plugin.disable_full_page_plugin_for_types pref on the about:config page and remove the application/pdf part if present or reset the pref to the default via the right-click context menu if you want to display PDF documents in Firefox with another application (i.e. not the built-in PDF Viewer).
See also:
*https://support.mozilla.org/kb/view-pdf-files-firefox-without-downloading-them
The latest stable version of the PDF Viewer (pdfjs) extension:
*PDF Viewer: https://addons.mozilla.org/firefox/addon/pdfjs/
Latest development version of the PDF Viewer (pdfjs) extension:
*http://mozilla.github.io/pdf.js/extensions/firefox/pdf.js.xpi

System.out.println does not print out anything

I'm wonder why the dos mode does not print out the System.out.println.
My code has:
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
public class test extends HttpServlet {
   public void doGet(HttpServletRequest request,
   HttpServletResponse response) throws IOException,
   ServletException {
      System.out.println("Hello");
The compilation is ok... but it does not display anything... how come?

"System.out.print()" prints to the log file of the tomcat server. in order to print on the screen use JspWriter.
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
public class test extends HttpServlet {
public void doGet(HttpServletRequest request,
HttpServletResponse response) throws IOException,
ServletException {
response.setContentType("text/html");
PrintWriter out = response.getWriter();
out.println("Hello");
//System.out.println("Hello");
Hope this helps!

Scanned documents do not print out correctly on forms.

Similar Messages

Maybe you are looking for