Scanned Grayscale files not loading into iPhoto

I have just purchased a new iMac, having not been a Mac User before. I have been importing photos from an external (Windows formatted) hard drive with apparent success. However, on attempting to import some scanned jpegs (Epson Perfection V700 Photo scanner) in 8 bit grayscale, I got the "unrecognised format message". No attempt at saving on the desktop and importing into iPhoto from there worked. I then loaded them into Photoshop Elements 4 on the Mac, and saved again as a standard jpeg, but with no luck. However, by chance I tried saving with the "Embed colour profile: Epson Gray - Gamma 1.8" option unchecked in PE4's "Save as" menu. This time the resulting jpeg file did load into iPhoto. Have you any ideas why the original image did not load and what is the significance of why the "non-embedded" image did. Is there a quick way to convert these images, if necessary, using this method - I have a lot of scanned images like this. Another feature which might confirm what is wrong here is that the in Photoshop Elements, the label at the top of the displayed image shows the jpeg name, then size as a %, and then (Gray/8*). The files which load correctly into iPhoto do not show this "*" in Photoshop.

Download and run *+Embed sRGB Profile 2+* on the grayscale photos by dropping the image files onto the Automator workflow application. You can get it from Toad's Cellar.
This will let you avoid having to rescan those files as RGB color.

Similar Messages

My Nikon 7100 RAW files will not load into Iphoto.

My Nikon 7100 RAW files will not load into IPhoto. The computer will recognize the files once the download is complete, but fails to finalize. My version of IPhoto is 7.1.5 and my computer is a Mid 2007 Mac Mini Model. I have Light Room 5, but my wife and I are prefer IPhoto for basic download and sharing. Is there a possibility of getting the RAW files to download ?

what version of the OS?
You need Mt Lion and iPhoto '09 for your camera RAW support - OS X Mountain Lion: Supported digital camera RAW formats -
If your computer will support tMavericks do the free upgrade to it and purchase the upgrade to iPhoto '11 version 9.5.x in the App store
LN

Fascinate video will not load into iphoto on macbook

my mp4 video opens in quicktime player. I "saved as" in quicktime to a .mov file.
neither the mp4 or the .mov file will load into iphoto.
iphoto error message says, "could not be imported, unrecognizable format."
I tried a new SD card and new video file, no help.

You said that the quicktime video was in the .mp4 format and the saved as a .mov format. I'm not sure but if you are trying to get them into iphoto is iphoto looking for a .jpg format?

Sony WX7 .mts video files not imported into iPhoto 11

Apple indicates iLife ’11 supports AVCHD (.mts) files, however, I've been unable to get iPhoto 11 to import video files from the Sony WX7 camera. Photo's are imported properly via both usb and directly from the SD card reader in my Macbook Pro (i7) 2011, however, video files are not. I've read that iMovie '08 supports Sony AVCHD 2011-model video cameras, but iPhoto 11 appears not to.
Mac OS X v10.6.7, is fully up to date. Has anybody found a solution?

Not sure where you are seeing that AVCHD is supported in iPhoto '11 but it is not - use iMovie to import your AVCHD movies - that works for my my Sony DSC-HX5
LN

Nikon D3300 NEF files not importing into iPhoto with Yosemite. Videos import, photos come in black

I'm having issues importing NEF (Raw) photos since I upgraded to Yosemite. I also updated iPhoto to the most current version. The videos will import, but the photos are coming in black. I can see them in the Nikon photo viewer on the Mac with no issues.

There are a series of posts on the forum right now detailing issues with Raw support. By no means all folks have them - I don't for instance - but many seem to.
Try the fix in this thread
RAW files suddenly show up as "not supported" (Aperture 3.5.1, OS X 10.10)
which basically trashes the Raw support and reinstalls it on your Mac.
As always, back up first,

Iphoto does not load into iDVD- too many photos?

Recently upgraded to Leopard 10.5.6 and iLife '09. Ever since, iPhoto will not load into iDVD (iphoto 8.0 and iDVD 7.0.3). When trying to open current and new projects in iDVD, the project opens, and plays, but the photos from iPhoto never load, the loading icon just spins on and on. When I open a new document, the same thing happens. Tried trashing preferences in both programs, reinstalling iLife, and reparing permissions. All software updates are current. Still won't work.
I am starting to wonder if it has to do with the number of photos I have in iPhoto, which is about 4000. The photos loaded with no problem until I upgraded. Could it be that the upgrades in iPhoto just make the files too large, and it's too much to expect that many photos to load? Does anyone know how many photos is too many,— or can you suggest anything I have not tired that might work?

This is from Mac Help. It is a good idea to create another account to use in troubleshooting situations such as this. After you create the new account, open iDVD from that account. Try creating a small project to see if you are having the same problems. Post back with your results.
_Adding a new user account to your computer_
You can create individual user accounts for each person who uses your computer. Each new user has a separate home folder and can adjust his or her own preferences without affecting other users.
Choose Apple menu > System Preferences and click Accounts.
If some settings are dimmed, click the lock icon and type an administrator name and password.
Click Add and type the user's name.
If you don't want to use the short name generated automatically, type a new short name. (Once the account is created, you won't be able to change the short name.)
Type the user's password in the Password and Verify boxes.
Type a hint to help the user remember the password if they have trouble remembering it at login.
Click Parental Controls and select options to determine what the user can do with the computer.
If you change your mind while you're creating a new user account, click Delete to cancel.

.gif files will not load into site

I posted a question earlier about pages not loading and the question was answered, but now my .gif files will not load. Below is the log:
Started: 4/9/2012 2:41 PM
imageshomepage\Announce35.gif - error occurred - An FTP error occurred - cannot put Announce35.gif. Access denied. The file may not exist, or there could be a permission problem.
File activity incomplete. 1 file(s) or folder(s) were not completed.
Files with errors: 1
imageshomepage\Announce35.gif
Finished: 4/9/2012 2:41 PM
I have them loading into the images folder that is in the htdocs folder.
I stated in my previous question that I am self taught via the adobe DW tutorial. I had a catastrophic computer crash and had to reload everything. I apparently did not tell DW which file to load into before and now that is fixed. Any help would be greatly appreciated.
Thanks

I was never a big fan of using DW to FTP. There are several FTP programs that you might find work better than DW. For example Filezilla, free and works pretty darn well.
http://filezilla-project.org/
For me, being able to graphically see my local site on one half my screen and the site as it sits on the server on the other half of the screen really helps me quickly spot problems if I upload something and it doesn't display.
Anyway... DW is not the only option for loading files to your server.
Best wishes,
Adninjastrator

CR files will no longer show in bridge and will not load into PS

Hi I had a problem with bridge CS6 dynamic link failing and had tech support finally help with the problem by phone They had me reinstall PSCS6 and Bridge among other things like setting the permissions differenty. It worked ok when I opened it again after those changes and then I closed the apps and opened them again the next day (today) but now the CR files will show no thumbnails nor previews in bridge and will not load into PSCS6.
I get now the following error messages
These are files that are on my system and not from a camera plugged into the computer. They had worked just fine before the reinstall and permisisons changes the tech had me do. They open in the preview app and look fine so I know they are not corrupted files and I have tried different saved versions of the same (or any other CR file) and none of them will now open and Camera raw itself seems no where to be found. My prefences in camera raw have not clanged. Any ideas??? thanks and aloha, UP
I tried image processor in bridge to make them PS files and got the following error message.
I tried to load one of the CR files from the finder dirretly and got the following error message.
Any help would be appreciated. If the post goes inanswered I will call tech support again. aloha UP

HI, I managed to fix the trouble by reinsatalling once again and running updates BEFORE opening bridge. It seemed that if I ran the update AFTER opening bridge I would get either an up to date status when checking for updates or I would get an install failure notice on all 4 updates that were trying to install. The updates were for camera raw, bridge and PS. I can't explain why but that helped a little. I also changed permissions on my whole user accnt to include read/write for all users. I can't say if this helped or not. I also had to go into my camera B/U files on a sepate HD and replace some of the CR folders I was using o nthe desktop. Still the CR files would not show a thumb nor a preview till I then went to each individual file inside that folder and purged the cashe for that file so it could repopulate the cashe yet again. This has been the strangest few days in PSCS6 history! Well my personal history. I will report back here if more quirks emerge. I would prefer quarks though....aloha, U

I have a slideshow I made in iPhoto and it is showing in iTunes movies but when I select it and click 'sync' it does not load into my phone. I have made sure it is a mobile version of the slideshow

I have a slideshow I made in iPhoto and it is showing in iTunes movies but when I select it and click 'sync' it does not load into my phone. I have made sure it is a mobile version of the slideshow. How do I load it onto my phone? Or also, how do I play it from iPhoto or iTunes through Apple TV

Was the iPod setup via iTunes on this computer?
Setup via wifi?
Was the iPod previous synced to another iTunes library/computer?
Have you successfully synced from this iTunes library/computer before?
Do the songs play in iTunes?
Do you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod
Try syncing using the manual method

The .prel files will not load into premiere elements 13 and says that there is a missing codec. This is a school's site llicense that we've used for more thatn a month.

The .prel files will not load into premiere elements 13 and says that there is a missing codec. This is a school's site llicense that we've used in our lab for more than a month.

GPPNeil
Premiere Elements 13 on Windows 8.1 (assumed 64 bit).
First..
1. Have you updated from 13 to the 13.1 Update using an opened project's Help Menu/Update. If not, please do so.
2. Do the problems exist if you disable the antivirus and firewall(s)?
3. Are you running the program as Administrator? Do you have the latest version of QuickTime installed on your computer?
4. Have you refreshed the Online Services using Premiere Elements Editor Edit Menu/Preferences/Web Sharing?
5. Have you updated the Adobe Application Manager?
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
6.Is your video card/graphics card driver version up to date according to the web site of the manufacturer of the card?
7. Lots more we could go through such as deleting the Adobe Premiere Elements Prefs file and, if necessary, the whole
13.0 Folder in which it exists.
But, I think that you have enough things going on here to warrant an uninstall, free ccleaner run through (regular cleaner and registry cleaner parts) and then reinstall with the antivirus and firewall(s) disabled.
CCleaner - PC Optimization and Cleaning - Free Download
If the problems persist after all that then we will adjust to additional troubleshooting maneuvers.
Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

SWF Files Not Loading

I created a master fla and swf files to load into the master
file externally. Everything loads into the master file just fine
when I view it in flash or flash player. However I need to add a
background to it along with a couple other things that I only now
how to do in dreamweaver. Dreamweaver will load the master flash
swf but it wont load the external swfs. Please help if you can.
Thanks.

I am not sure I completely understand what you are trying to
do. Can you give us a link to the page in question?

Imported Jar file not loaded at run time ORA-105100

Oracle 9iDS forms Version 9.0.2.9.0
Oracle 9iAS Release 2
I have imported java classes from a jar file into my form. I have it working in client server. Added the entries to the classpath in the default.env and system environment variable for development of the form and for execution.
Moved the jar file, form and testing html to the application server. Modified the classpath in the default.env file. Tested the form. Got the ORA-105100 error. MetaLink note 261650.1 states that error frm-40735 When-Button-Pressed triger raised exception ORA-105100 if calling a java function from a jar file. Cause: Jar file not loaded at run time. Solution: add in your default.env CLASSPATH parameter your jar file including the whole directory of the jar file location. That has been done and the OC4J has been restarted. Still get error.
Oracle support has not been able to give me much help as of yet. Does anyone have any further ideas, or documentation that I can read to help get this working?
Thanks in advance for any assistance that is offered.

Hey people any clues?

Itunes library not loading in iphoto

the library shows, but will not load in iphoto. i've tried deleting the xml file to create a new one, but that didn't work.
i have recently moved my library to an external hard drive. i had no issues before.
any suggestions?

i have been running out of space on my hard drive because of my itunes library. i purchased an external and found a site outlining how to move it and did so. it calls for moving the main folder but not the album artwork or the xml file.
i open iphoto, create a photo slideshow and when i go to choose a song, it shows me the list but gives an error when i choose it. i had no problems previously, so i assume it's because the program cannot find the songs because the files are now on the external drive. i research and several sites say to delete the xml file and create a new playlist in itunes to redirect the files. this did not work and now i'm not sure what to do besides just moving it back to my hard drive and dealing with the space issues some other way.

Clips do not load into iMovie Project Browser

I have imported a full feature Creative Commons movie into iMovie to edit for a short music video. It downloaded in MP4 format and originally loaded into the Project browser but would not let me split clips. I've tried converting it to .MOV in MPEG Streamclip and now the clips don’t even show up in the Project Browser. I see the clips in the Event Browser but they will not load into Project Browser. I've tried converting it to .MOV in Quicktime where I was able to split a clip. I then tried to import that whole movie file into iMovie but it won’t import. What am I doing wrong?

When I have the iMovie Library (with the sub-file which iMovie-generated titled of “2015”) selected in the Sidebar the clips show in the Event Browser window but not in Project Browser window. The sub-file to “2015” is my movie name. When I select this file, the Event Browser goes black with white-lettered words: “No clips found.” There are no clips in the Project Browser as well.

Multiple clips load into iPhoto

Shooting an event I need to stop occasionally; as a result I get multiple clips that have to be looked at individually.
) Is there a way of pausing a shoot so that I get one continuous strip?
2)Since Vado loads into iPhoto rather than iMovie, whats the easiest way to get the clips into iMovie for editing and eventually burning a disc?
TIA
apbdmd

Lots of luck, Creative does not let you burn to DVD.
The only choices in their software after loading are upload to the internet.
(maybe we don't want to upload just one clip)
Maybe we want to save our vacation, etc. videos and DVD them to give to relati'ves.
Forget aboutit!
Because even if you can somehow figure out how to drag clips to another editing program. The finished
video will NOT burn to DVD.

Scanned Grayscale files not loading into iPhoto

Similar Messages

Maybe you are looking for