Scanned image problems CS4 Mac
I am scanning old slides and negatives and as these have been stored in the tropics many of them are damaged by what could be fungus.
I have tried cleaning them without success and now I am trying to recover them in Photoshop.
There is two main types of damage:
A web of lines that covers the whole picture (See Fig 1) and isolated cobwebs (See Fig 2)
I have tried Dust and scratch filter but this destroys the detail.
Has anyone got any suggestions for a way to minimise the damage?
bortu wrote:
…how to activate ICE within VUScan.
…but I doubt it will help with the kind of damage you have.
Wo Tai Lao Le
我太老了
Similar Messages
-
Scanning image problems 7520 printer
Recently on my 7520 printer when I am scanning the printer is usually including the whole bed in my scan instead of just the picture I want included It used to just include the image automatically no matter what size it was
Hi,
Please scan from a computer. You have more options for scanning including area you wish to scan (under Scan area option).
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Hi guys,
So I've got a problem with restoring the image backup I did (using Disk Utility) of my 500GB HD on my MBP which was acting weird or maybe even crashed a few months ago. After creating the backup image and putting it on my external device, I installed Mavericks back to see if everything was alright (mainly the HD) and everything seems okay.
I did try restoring the backup image through disk utility before installing mavericks (thus erasing everything again on the HD) AND after. But nothing..
The whole process starts fine and then it starts scanning the image when after maybe a good 10-15min in I get a message that says that it was unable to scan the image. I tried verifying the disk(s), everything came out "OK". Also tried scanning it through Images > Scan image for Restore... with the same results.
While searching I've seen people getting messages like "Unable to scan filename.dmg (Invalid argument)" and "Unable to scan filename.dmg
(Internal error)" but none have (Input/output error)
The screen grab is below.
I also came across something about using terminal/commands but I'm not that savvy with it, especially considering that those there had issues with either mounting or trouble finding the image.
I've also tried moving the backup image to a different external device 2TB and also the desktop because I read it may have to do with the format of the externals or maybe free space. But THEN I would get a message saying
"The Finder can't complete the operation because some data in "Mac HD Backup.dmg" can't be read or written. Error code -36"
Fyi ALL my externals are HFS+/Journaled and the backup image format was compressed.
I REALLY don't know what to do next. Was it the wrong move to create a dmg image? Have I lost everything? Is there still a way out?
If anyone can help, THANKS!
2012 MacBook Pro, Mac OS X (10.9.3)Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. You may have to leave the machine there for several days.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed. -
Have new Macbook Pro, just bought the mentioned epson scanner. Running Mac OS X 10.7.2. Have HP photo smart 8250. Scanned images of white, lined index cards print out in blue hue. Trying to figure out what my problem is. Running scanner with Image Capture. Any pointers in right direction welcome.
You really need to check with Epson with regards to that printer. This forum is for the MacBook Pro hardware.
-
Probleme mit Mac/ PremierePro CS4 import vom Camcorder
Hallo,
ich möchte von meiner Sony-Kamera importieren.
1. Bei Einst. "neues Projekt" kann ich bei Aufnahmeformat nur QuickTime anklicken - also bekomme dementspr auch nur mov-Dateien, ich möchte aber lieber avi
2. Wenn ich dann auf "Aufnehmen" gehen und den Button "Szene" anklicke, wird trotzdem der Film in einem importiert - ohne Szenen!
3. Es werden grundsätzlich nur 23 Minuten importiert, der Timecode läuft weiter, aber nur 23 Minuten Film werden aufgenommen!!
4. Gibt es die Möglichkeit mit einem anderen Programm (besitze Creative SuiteCS4), den Film direkt auf Festpl. zu imortieren, ohne ein Projetz zu erstellen, denn ich möchte erst einmal alle Filme archivieren um sie später zu bearbeiten!
Es wäre schön, wenn mir jemand helfen könnte. Ich hatte vorher einen PC und habe mit Canopus/Edius gearbeitet und darum nicht so viel Ahnung von PremierePro.
Vielen Dank schon mal!
HuthieAm 22.01.2010 um 08:45 schrieb Mylenium:
>> 1. Bei Einst. "neues Projekt" kann ich bei Aufnahmeformat nur QuickTime anklicken - also bekomme dementspr auch nur mov-Dateien, ich möchte aber lieber avi
Ähm: "Probleme mit Mac/ PremierePro CS4"??? Was willst du mit AVI? Sorry, das kannste vergessen. Feuer und Wasser.
o.k. wenn das genausogut, oder sogar besser ist!
>> 2. Wenn ich dann auf "Aufnehmen" gehen und den Button "Szene" anklicke, wird trotzdem der Film in einem importiert - ohne Szenen!
Was für Aufnahmen? Szenenerkennung braucht funktionierenden Timecode und DV/HDV.
zu 2) habe vom Band (Sony Kamera mit Dv-Band) aufgenommen (Inkl Time-Code). Dort hat die Szenenkennung gestern das erste mal geklappt, allerdings sind die Clips nur in Premiere sichtbar, im Finder nur das komplette movi. Lieber wäre mir wenn die Clips einzeln und individuell einsetzbar wären.
Kann es sein, dass bei mir z.T. Timecode/Szenenkennung nicht funktioniert hat, wenn das Band vorher schon einmal bespielt war?
>> 3. Es werden grundsätzlich nur 23 Minuten importiert, der Timecode läuft weiter, aber nur 23 Minuten Film werden aufgenommen!!
Festplattenplatz?
zu 3) Ich habe 2x 1TB Festplatten, eine nur für Filme, daran kann es also nicht liegen. Ist irgendeine Einstellung bei mir vielleicht auf 23 Minuten gestellt? Habe aber keine entsprechende Einstellung gefunden!
>> den Film direkt auf Festpl. zu imortieren, ohne ein Projetz zu erstellen, denn ich möchte erst einmal alle Filme archivieren um sie später zu bearbeiten!
OnLocation (oder iMovie lol)
zu 4) OnLocation hatte ich auch schon probiert, aber hier bin ich auch nicht weiter gekommen. Ist das nicht nur wenn man live Filme aufnimmt, oder was mache ich hier falsch! IMove habe ich auch schon bei einem Film versucht, aber wenn man schon ein Leistungspaket wie die Creative Suite hat will man sich nicht unmedingt mit iMove abgeben. Ich habe noch mindestens 50 Filme auf Festpl zu übertragen, da sollte es schon optimal genutzt werden.
Mylenium
> -
[CS4 Mac] Change PictureWidget image at running time.
Hello,
I have a PictureWidget on a panel - by default it displays a PNG file loaded from resources.
It can also display error icons when a query fails - etc: these icons are loaded from plugin's 'PICT' resources.
So far so good.
Now - when a query doesn't fail it would need to display an image stored as a 'PICT' file on a server: the query result is telling me which 'PICT' file is to be displayed in the PictureWidget.
For QXP I was using DrawPicture() to draw the PicHandle directly in the item rectangle.
Switching it to InDesign - I am looking for a recipe to achieve same result but following InDesign SDK means and spirit.
In other words - how do we change a PictureWidget image at running time in order to display a PICT files from server instead of built-in default PNG or 'PICT' resources.
Any pointer or direction to achieve this would be very much appreciated indeed.
Best regards
Patrick PerroudHi,
I have to add a image on a dialog, I am able to add a image on Windows by associating a image resource ID with image path in .rc file. But not able to do the same on mac. How can we associate image resource ID with image path on MAC?
Thanks in advance. -
Scanning from Photoshop CS4, using a Brother MFC-8420
Hi all, I'm trying to scan from within Photoshop CS4 (File -> import -> Brother Twain -> etc).
It worked fine with Tiger/PPC/CS2. But since I have Leopard on an Intel Mac Pro, no dice. All I can use is the 'Brother Control Center' which allows me to make staggering 100dpi scans at 100%, but i need a higher resolution.
I already downloaded the proper drivers from Brothers site. Several times.
Does anyone have any suggestions? ThanksYou can change the scan resolution settings. With the ControlCenter software, just to the right of the scanner "Model" selector, there is a "Configuration" button where you can choose Configuration > Scan > Image - and set the resolution and many other optimization settings for the scans, including file type, document size etc.
Each of the different scan types - Image, OCR, E-mail, File - can have different configuration set.
I'm not having any problems scanning from my MFC-9840CDW to PS CS3 or by using the Brother ControlCenter2 software. I haven't tested with PS 4 as we are moving away from slowly released, buggy, proprietary interfaces that Adobe products have become... (Another whole topic and rant ) -
8600 scanner won't produce scan image after overview performed
Using 8600 All-inOne with Mac OS 10.9.4: Problem with scanner-- After scanning overview performed; when I try to scan, I get the message "Done scanning selected areas" and no scanned image has been saved to Documents. Thanks for help!
Hi @KateSR , and welcome to the HP Forums!
I see you are experiencing scan issues. I would like to help!
Do these issues occur when making a copy from the scanner glass or feeder, or just when scanning?
I would recommend performing a power reset on the printer. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
Please let me know what you find. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green. -
Problem description:
mac mail not opening, software updates not working, app store not opening. 10.9.5
EtreCheck version: 2.0.11 (98)
Report generated 1 December 2014 16:51:49 CET
Hardware Information: ℹ️
iMac (21.5-inch, Late 2009) (Verified)
iMac - model: iMac10,1
1 3.06 GHz Intel Core 2 Duo CPU: 2-core
12 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1067 MHz ok
BANK 1/DIMM0
4 GB DDR3 1067 MHz ok
BANK 0/DIMM1
2 GB DDR3 1067 MHz ok
BANK 1/DIMM1
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400 - VRAM: 256 MB
iMac 1920 x 1080
BenQ GL2240 1920 x 1080 @ 60 Hz
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 1:32:17
Disk Information: ℹ️
WDC WD5000AAKS-40V2B0 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (164.03 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GA11N
USB Information: ℹ️
EPSON EPSON Epson Stylus S22 Series
Canon MX410 series
ASMedia AS2105 1 TB
S.M.A.R.T. Status: Verified
EFI (disk3s1) <not mounted> : 210 MB
Backup (disk3s2) /Volumes/Backup : 999.86 GB (506.24 GB free)
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader 7.95 GB
S.M.A.R.T. Status: Verified
EOS_DIGITAL (disk1s1) /Volumes/EOS_DIGITAL : 7.94 GB (7.83 GB free)
Western Digital My Book 1140 2 TB
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted> : 210 MB
2TB (disk2s2) /Volumes/2TB : 2.00 TB (1.50 TB free)
Wacom Co.,Ltd. CTE-450
Contour Design ShuttlePRO v2
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hidhook (9.0 24217.979618) Support
[not loaded] com.parallels.kext.hypervisor (9.0 24217.979618) Support
[not loaded] com.parallels.kext.netbridge (9.0 24217.979618) Support
[not loaded] com.parallels.kext.usbconnect (9.0 24217.979618) Support
[not loaded] com.parallels.kext.vnic (9.0 24217.979618) Support
/Applications/Toast 10 Titanium/Toast Titanium.app
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
/Library/Extensions
[loaded] at.obdev.nke.LittleSnitch (4052 - SDK 10.8) Support
[not loaded] xxx.qnation.PeerGuardian (1.1.9) Support
/System/Library/Extensions
[not loaded] com.FTDI.driver.FTDIUSBSerialDriver (2.2.18 - SDK 10.6) Support
[not loaded] com.pctools.iantivirus.kfs (1.0.1) Support
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) Support
Startup Items: ℹ️
ParallelsDesktopTransporter: Path: /Library/StartupItems/ParallelsDesktopTransporter
WkSvMacX: Path: /Library/StartupItems/WkSvMacX
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[running] at.obdev.LittleSnitchUIAgent.plist Support
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.CS4ServiceManager.plist Support
[running] com.epson.epw.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
Launch Daemons: ℹ️
[running] at.obdev.littlesnitchd.plist Support
[failed] com.adobe.fpsaud.plist Support
[loaded] com.adobe.versioncueCS4.plist Support
[loaded] com.barebones.textwrangler.plist Support
[running] com.cleverfiles.cfbackd.plist Support
[not loaded] com.gopro.stereomodestatus.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[invalid?] com.tvmobili.tvmobilisvcd.plist Support
[loaded] fi.polar.libpolar.plist Support
[running] fi.polar.polard.plist Support
[failed] xxx.qnation.PeerGuardian.kextload.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.facebook.videochat.[redacted].plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.macpaw.CleanMyMac.helperTool.plist Support
[loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist Support
[running] com.macpaw.CleanMyMac.volumeWatcher.plist Support
[invalid?] com.plexapp.helper.plist Support
[not loaded] com.spotify.webhelper.plist Support
User Login Items: ℹ️
Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
SmartDaemon Application (/Library/Application Support/CleverFiles/SmartDaemon.app)
SilverKeeper Scheduler ApplicationHidden (/Applications/SilverKeeper.app/Contents/Resources/SilverKeeper Scheduler.app)
Dropbox Application (/Applications/Dropbox.app)
Garmin ANT Agent UNKNOWN (missing value)
Internet Plug-ins: ℹ️
DirectorShockwave: Version: 11.5.7r609 Support
Google Earth Web Plug-in: Version: 6.1 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.2.0.16 - SDK 10.8 Support
PandoWebInst: Version: 1.0 Support
AdobePDFViewerNPAPI: Version: 10.1.12 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
DivXBrowserPlugin: Version: 2.0 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.239
iPhotoPhotocast: Version: 7.0 - SDK 10.8
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.0.0 Support
AdobePDFViewer: Version: 10.1.12 Support
GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 Support
JavaAppletPlugin: Version: Java 7 Update 71 Check version
User Internet Plug-ins: ℹ️
fbplugin_1_0_3: Version: (null) Support
Safari Extensions: ℹ️
Open in Internet Explorer
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Adobe Version Cue CS4 Support
DivX Support
Flash Player Support
Flip4Mac WMV Support
GoPro Support
Growl Support
Java Support
MacFUSE Support
MenuMeters Support
Perian Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: NO - Auto backup turned off
Destinations:
Back Up [Local]
Total size: 0 B
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Excellent
Backup size 0 B > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
12% Google Chrome
12% WindowServer
4% Dock
2% Little Snitch Agent
2% SystemUIServer
Top Processes by Memory: ℹ️
399 MB iTunes
322 MB mds_stores
216 MB Google Chrome Helper
193 MB Google Chrome
155 MB com.apple.IconServicesAgent
Virtual Memory Information: ℹ️
6.64 GB Free RAM
3.51 GB Active RAM
1.36 GB Inactive RAM
1.11 GB Wired RAM
1.91 GB Page-ins
0 B Page-outs[not loaded] com.pctools.iantivirus.kfs (1.0.1) Support
Un-install according to the developer's un-install instructions.
You do not need to use cleaning programs. They can destroy your computer operation as they may already have done.
CleanMyMac - Uninstall
CleanMyMac2 Un-install
After un-installing, run this program to make sure you got all the pieces.
EasyFind – Spotlight Replacement
Do a backup.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/com.apple.appstore.plist. Move the .plist to your desktop.
Restart, open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this. -
Can't scan to or from Mac to C4780
I was having problems with fuzzy or no picture when scanning. I used to use a HP Scan option on my Mac. But I upgraded the drivers for OS X 10.9.3. I no longer have the full disk version.
HELP! Need to scan some pics and documents to send off.
Thank you.
This question was solved.
View Solution.Hi VegasMav,
I would like to help you get your Photosmart C4780 All-in-One printer scanning to your Mac. I see you are running the newest operating system version Mavericks now. I am sorry to hear you were having problems with fuzzy or no picture when scanning. Let's make sure you can scan first, then we can ensure your scan quality is satisfactory!
Please open the following document. This document explains how to install and use the printer with 10.9. It also includes a frequently asked questions section that covers;
What if there is no driver update available in Apple Software Update?
What else do I need to know about the Apple Software Update driver?
How do I scan with the driver from Apple Software Update?
What if I upgraded to Mavericks from a previous Mac operating system?
What if I got an error trying to install an earlier version of my printer software?
OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
Please let me know the outcome of these efforts. Thanks. I look forward to hearing from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP -
AD account Login problem with MAC 10.6.8
Hi All,
We have around 50 odd MAC that are connected to windows server 2008 R2. the user were logining in to these MACs using their AD account. Recently few of the random MAC did not allow the user to login using their AD account.When analyzed though the MAC shows that it has connected to the Domain and the server is active with green button it has unbind itself from the server.I had to login in as local user bind the MAC back to get this resolved.
Now the same has started happeneing for most of the MAC that we have and every morning I have login as local Admin and unbind / bind the MAC with the server. this gets reset once the user reboots or shutsdown.
Have tried with few of the below solution but nothing helped:
Solution 1:
<key>mdns_timeout</key>
<integer>2</integer>
The integer value is in seconds; changing it to at least 5 should allow the Mac OS X client to reconnect to the Active Directory domain after a network interruption. In some configurations, a larger timeout value may be required.
You can change this value by using the sudo command and a text editor to edit the preference file directly. Or you can use the Terminal command below, making sure to enter it all on a single line:
sudo /usr/libexec/PlistBuddy -c 'Set :mdns_timeout 5' /System/Library/SystemConfiguration/IPMonitor.bundle/Contents/Info.plist
Solution 2:
I have seen all of the probable solutions and tried everything and still I am getting issues with 10.6.6 and after rebooting the Mac gets unbind. Or the Mac gets Network Accounts Available even when not accessing the list of users from AD. But the thing that I have done that has solved all my issues with AD on the Macs is to uncheck the box to search on all domains. For some reason I am seeing that when the Macs have this option checked, it searches through out the forest on the same domain controller more than once, so AD stops the handshaking of the authentication.
I hope this helps like it did on our Network, since then I have not seen the Macs lose the binding or slow SMB.
If you've tried this please let us know.
TIP: Uncheck Allow Authentication from any domain for Mac AD problems
Wednesday, April 20, 2011
Steven Wells sent a fix and an explanation of problems with Macs losing their binding to Active Diretory:
Unchecking "Allow authentication from any domain in the forest" is working at our college. We have been beating our heads on this for about 2 terms, with no understanding of why it works in some places and not in others. When we found this working, our IT guy said that the Security SID is being duplicated, when it looks in other domain forest, and that is what is causing the problem. This is the first time I have found an explanation for the problem.
If you've tried this approach please let us know.
Solution 3:
Solved it. Create a file in Textedit with the name 'auto_master' (no file extension) with the following contents:
# Automounter master map
+auto_master # Use directory service
/net -hosts -nobrowse,hidefromfinder,nosuid
/home auto_home -nobrowse,hidefromfinder
#/Network/Servers -fstab
/- -static
Place this in /etc/ folder
Hope this helps
solution 4:
TIP: a Kerberos fix for OS X 10.5 and 10.6 binding to Active directory
Friday, November 11, 2011
Mehdi Mafi forwarded a fix he found for problems with Leopard and Snow Leopard binding to Active Directory:
This was taken from Dane Riley's imaging building for DeployStudio.
With Mac OS X Leopard every Mac is now running a KDC (Kerberos Distribution Center). Basically each imaged machine is using the same security certificate and hash. Deploying a single image will deploy the same KDC to every system. This [Apple] article covers how to reset the local KDC so that each system is unique. Basically, do the following:
Launch Keychain Access
Search for com.apple.kerberos.kdc and delete all 3 items
Using Terminal type sudo rm -fr /var/db/krb5kdc
After deployment, perhaps using Apple Remote Desktop to all systems, re- establish the KDC by typing sudo /usr/libexec/configureLocalKDC
If you've tried this approach with Mac OS X 10.5, 10.6, or even Lion, please let us know. .
TIP: More on a kerberos fix for AD binding problems
Monday, November 14, 2011
Mehdi Mafi updated his Friday report about Mac OS X 10.6 problems binding to Active Directory:
You may want to add this. If the Mac keeps unbinding from AD (people can't log in to a Mac), here is how to fix it:
Unbind it from Domain
Launch Keychain Access
Search for com.apple.kerberos.kdc and delete all 3 items
Using Terminal type sudo rm -fr /var/db/krb5kdc
Re-establish the KDC by typing sudo /usr/libexec/configureLocalKDC
Bind it to domain again ( When you bind, uncheck allow authentication from any domain in the forest in: Directory Utilitiy-> Advanced Options\Administrative ) this fix the issue that sometimes it can' find AD under search space.
If you tried this please let us know.
Solution 5:
For Snow Leopard AD login issues, use upper case domain
Solution 6: for .local
To create this StartupItem, create the following directory as root:
/Library/StartupItems/FixADAuth
Then chown it to root:wheel and chmod it to 755. These must also be the owner/permissions on the two files it will contain, below:
Contents of our /Library/StartupItems/FixADAuth/FixADAuth:
#!/bin/bash
. /etc/rc.common
date > /var/log/FixADAuth.log
n=0
AuthSuccess=0
while [ $AuthSuccess != 1 ]
do
id Administrator && AuthSuccess=1 || networksetup -setsearchdomains Ethernet "Empty"; networksetup -setsearchdomains Ethernet middlewich.local; n=$(($n+1))
done
echo Authentication successful: $AuthSuccess >> /var/log/FixADAuth.log echo Operation count: $n >> /var/log/FixADAuth.log
date >> /var/log/FixADAuth.log
Contents of our /Library/StartupItems/FixADAuth/StartupParameters.plist:
Description = "Fixes Active Directory authentication issue";
Uses = ("Disks");
Obviously you'll need to change "middlewich.local" to your own domain name (and the network interface name if your connection is wireless). The script checks to see if it can see the user "Administrator" on the domain, as he's a fairly common bloke, but if you've renamed yours for security reasons then pick another one. I've also included some logging functionality for debug purposes, so you can verify how well the script is working if you need to and time it in your environment before telling the users how long to wait. The /var/log/FixADAuth.log file will contain the date/time the process started, the success variable set to 1 (just to verify), how many DNS operations were required to fix the problem, and the date/time it ended. For us the time difference is normally about +30-40 seconds with around 120-180 operations taking place. Once you're happy with the script, you can strip it down to its bare functionality if you like, like so for us:
#!/bin/bash
. /etc/rc.common
AuthSuccess=0
while [ $AuthSuccess != 1 ]
do
id Administrator && AuthSuccess=1 || networksetup -setsearchdomains Ethernet "Empty"; networksetup -setsearchdomains Ethernet middlewich.local
done
I hope this helps someone!
RegardsYou are welcome.
But the question is 10.6 mac just like 10.6.8 , as long as its the same and works.
Yes. You can save some updates by using the combo update.
10.6.8 Combo Updater -
10.4.10 image problem with Firefox and Photoshop on Intel and OD AFP server
We are working on a new client image (perfect client image to deploy with Netboot) and our Intel machines, new and old, are throwing errors in CS2 Photoshop and refusing to launch Firefox when we log in to home folders from the OSXserver, local accounts run OK. The Intel Mac Pros we got last year ran Photoshop fine using last years image. Power Macs are running OK logged in on the server and local. The biggest variable is we are now running 10.4.10, the last image was 10.4.9. Anyone seen this, any thoughts, I have tried everything I can think of.
Thanks!I haven't had any problems with 10.4 and solaris 10. At some point Apple upgraded to some version of OpenSSH that required the addition of the -Y switch to make things work well.
-
VBA code to import scanned images into Photoshop CS2 with TWAIN
Hi,
I have to develop a solution that automates the scanning of an image using the TWAIN driver interface. Once scanned, the image appears as a new document in Photoshop where it will be further processed using VBScript scripts.
The solution so far :
Using the freeware 'EZTW32.dll' (copied into C:\WINDOWS\System\), I am able to open the TWAIN scan dialogue on screen, using the function 'TWAIN_AcquireToClipboard(Me.Hwnd, nPixTypes) from the 'EZTW32' dll.
Once the image is scanned, the TWAIN driver is automatically closed, leaving the scanned image on the Windows clipboard.
I then launch Photoshop CS2 using a shell code :
(It is important that Photoshop runs minimized)
Dim strPathname As String
Dim lngShellReturn As Long
Dim appRef As Object
Dim newDocRef
strPathname = "C:\Program Files\Adobe\Adobe Photoshop CS2\Photoshop.exe"
lngShellReturn = Shell(strPathname, vbMinimizedNoFocus)
Set appRef = CreateObject("Photoshop.Application")
When Photoshop is running, then a new document is created and the scanned image is pasted into the document from the Windows clipboard...
Set newDocRef = Documents.Add(8.268, 11.693, 600, "New Doc")
newDocRef.Paste
OK, this works up to a point. The newly scanned image appears automatically in Photoshop.
The big problem is that when the user makes a change in resolution or draws a selection box in the TWAIN dialog, this data is not recovered from TWAIN, so the image size parameters in the new document cannot be set.
A beter solution would be to write code that emulates the menu commands in Photoshop CS2:
File -> Import -> [Current Scanner]
that launches the TWAIN driver for the current scanner (the code must close TWAIN immediately after scanning). In this case, the resolution and image selection parameters are also imported into the new document.
I am currently refering to the Photoshop CS2 SDK. Do I need to request the Advanced SDK ?
Once beyond this point, then I think I can continue the image processing routines using VBScript as per the SDK.
Any help or other pointers to the TWAIN problem would be VERY APPRECIATED !
LarsPLEASE IGNORE MY PREVIOUS POST !
I have now fully resolved the TWAIN problem. It works perfectly and is very robust. I am now continuing with the batch image processing for the newly scanned images using the Photoshop CS2 SDK scripting documents, that I find very detailed, well written, and VERY helpful :)
Peace and love,
Lars -
Reader X displays scanned images as blank, grey pages
I have a great many PDFs (version 1.5) that are now unreadable with Acrobat X. These pages consist of scanned images that were converted to PDF, but now the pages are grey. You can search the OCR of the documents as before, but you can't see the pages. I have other PDFs that were created the same way at the same time, but don't have that problem, so it's inconsistent. The problem does not exist with Reader 9.
In my case: v10.1.1 would not open more than one pdf at a time on a user workstation (although mine did) so I tried disabling protected mode and made sure the large image display setting was correct.
To no avail. Reinstalled version base version 10, checked the same settings...no joy
Also tried repairing the install and re-updated from the base v10...still no love
Solution for me: Opened reader X, under Help-->Online Support, there is an option to generate a system report which availed the following:
Graphics Card: NVIDIA GeForce FX 5200
Version: 7.15.10.9685
Check: Not Supported
And of coarse the most recent driver was already present. Had to go back to v9.4
All good now. Hope this saves someone a few hours! -
InDesign CS4 Mac starts but then freezes
Indesign CS4 Mac starts up but freezes from there. Trying to open files or create new ones results in the filename appearing at the bottom of the Window drop-down menu, but the file doesnt appear on-screen.
The same result occurs when opening files using "Open Recent File" as well as double-clicking the file in Finder or using "Open With" in FInder.
It couldnt have picked a worse time to crap out - right in the middle of an urgent contract!! Dang Cleetus!!
Any suggestions - apart from re-installing the program?
Cheers,
JohnTried renaming InDesign Saved data and InDesign Defaults and restarting InDesign - that didnt seem to fix the problem - after re-starting InDesign it seemed the program didnt write new versions of the files on re-start.
Will head back to the office & connect to my 23" display & see if ID works OK with that - that would confirm that it's a screen pointing issue?
Would re-installing ID help?
Cheers,
John
Maybe you are looking for
-
Problem is testing mapping via test tab - URGENT
Hello experts, I have a idoc to file scenario. Now in my production environment, SAP r/3 is sending some 14 idocs containing around 13000 article informations in all. 12 of the 14 idocs have been processed successfully but 2 idocs errored out. When i
-
How do I get labview for linux to send out ascii code to a motion controller?
I have posted part of this problem but I will now try to clearify things. I have an x-y stage that needs motion control. I have to run the motion controller from within a linux system (RedHat 7.1) due to others in the research area. I have found a mo
-
Receivables - Query of Customers, sorted by Payment Terms?
I'm looking for an easy way to run a query (through the Applications layer) of all customers, sorted by their Payment Terms (Net 30, Net 45, etc.) Any ideas?
-
How can I get Firefox to recognize Excel 2007-2010 XLSX file extension?
There is an Applications setting (under Tools/Options) for Excel 97-2003 Worksheet file extension. How can I add another setting for newer Excel file extension XLSX?
-
How to install printer which is not listed in the software list
I just bought Canon MX372 and I am having a hard time installing it. I have installed the software that came with it and yet I can't add it as printer? It is always giving me a msg to update the software and when I accept to update it takes a minute