Scanner and the reset() method

After reading all the way through a scanner, is there a way to return back to the front/beginning of it?

No. Note that the reset() method of Scanner doesn't rewind you to the beginning of a file.
Simply create another Scanner with the same file.
edit: What is your Scanner's input? I was assuming it was from a File.

Similar Messages

My Ipad2 won't turn off. I've tried the reset method, holding both buttons down for at least 10 seconds, but this doesn't work. I'm on version 5.1.1 and all other functions work except that I cannot get onto the internet via wi-fi either. Help ??

My Ipad2 won't turn off. I have tried the reset method by holding both buttons down for at least 10 seconds, but this doesn't work. I can't get onto the internet via wi-fi either (don't have a 3G card fitted). All other functions seem to be working OK including charging. Not had this problem before, but I recently upgraded software to 5.1.1 so is there a bug in there somewhere?

Look at last link.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Hey guys, i get the message "Your Apple ID was deaktivated" I have changed my password and the pay method too but nothing happens

Hey guys, i get the message "Your Apple ID was deaktivated" I have changed my password and the pay method too but nothing happens

After resetting your password have you tried logging out of your account on your phone by tapping on your id in Settings > iTunes & App Store and then logging back in to see if that 'refreshes' the account on it and if it then works ?
If that doesn't fix it then you might need to contact iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

I bought an iphone 4 from my friend and he do not know his apple ID and we are trying to know the email attached to is apple ID so we can rest it cause he forgot them as well and the reset button in the 2 steps always says that the email is always sent !

i bought an iphone 4 from my friend and he do not know his apple ID and we are trying to know the email attached to is apple ID so we can rest it cause he forgot them as well and the reset button in the 2 steps always says that the email is always sent ! ( even if you wrote a worng ID like ( asdasdasd ) it will say sent !! how come and now am trying to know or need a hint on that email so my freind could try to remember it !
to those who will think that this phone is stolen , no its not and i would love to go to apple store if there is 1 in jordan so they can help us ,
i have everything with this iphone the box the catalog its serial number , everything but the ID and the (and apple ID is everything as you know)
so please if anyone have any suggestion to help me , and even apple it self if the can help me to get a support from them cause i tried everything to contact them by mail or any other option since as i said there is no apple store in jordan

he knows his ID , if he did all whats in the link he can get his password back ?
how can i make him call applecare ? is there a way to speak to them from jordan ??
i have been trying to reach any1 in apple so they can communicate and help my friend (us) to make him remember it .
am not asking for the password or trying to get into the phone without using it , and i can take my money back though i need to help my friend as well since now he cant use it as well.
thanks kil

Im having trouble changing my security questions, they are from years ago so i do not remember them and the reset email is no longer active,and i dont know how i can use the account because i added money to it but it asks for the questions. anybody help??

im having trouble changing my security questions, they are from years ago so i do not remember them and the reset email is no longer active.., and i dont know how i can use the account because i added money to it but it asks for the questions. anybody help??
this says it all..

Welcome to the Apple Community.
Contact Apple through iTunes Store Support, and explain that you have forgotten your 3 security questions, that you can reset your password, but doing so doesn't reset your security questions.
Remember, support will receive hundreds, if not thousands of requests per day, some from people trying it on, others with little explanation and others that are written extremely poorly. Take the time to explain your situation properly, be precise and concise, brief but comprehensive.

I have Photoshop Elements 9 on an iMac with OS 10.6.8. I bought a new printer/scanner and the program will not import the new scanner to replace the old one. How do I do this?

I have Photoshop Elements 9 on an iMac with OS 10.6.8. I bought a new printer/scanner and the program will not import the new scanner to replace the old one. How do I do this?

Thank you for your suggestions. I downloaded a more recent version of Twain, but this didn't help. I also tried closing and opening Photo Shop and restarting my computer without success. Reinstalling Photo Shop sounds like a very promising solution, but I'm not sure I will do it. In the meantime I can scan items using a printer program. These scans open in Photo Shop. It is an extra step.

Problem with combo boxes and the reset button in certain situations

Hi Everyone,
i have a problem to make the reset-button function properly in an what-if analysis dashboard.
The dashboard uses two combo boxes that are not visible at the same time. In my application the second combo box only appears when a dedicated menu (label based menu button) has been activated.
So i have combo box 1 when menu A is active an dand combo box 2 when menu 2 is active.
After starting the dashboard initial values are fine. If you then directly change to menu 2 (seeing combo box 2 with
the correct default value) and press the reset button, the dashboard returns to the initial view, showing
the menu 1 with the correct default value. If you now switch back to menu 2, you will see, that the combo box 2
is empty (i.e. nothing selected).
I also tracked the destination cells for the combo box value results as well as the source cells for the "selected item" and the
destination cells for the "Insert Selected Item". All this values seem to be correct. Therefore i assume that
this is an issue of event handling. Maybe the combo box 2 does not refresh its selected value because it is already
invisible when the values are restored.
This case can easily be simulated by placing two combo boxes and a push button (that changes the visibility of
the combo boxes) and the reset button on the canvas.
Maybe someone can help. I am able to provide a test xlf, if neccessary.
Thanks,
Oliver
P.S. I am using Xcelsius SP4 (Version 5.4.0.0)

Hello Debjit_Singha_86,
thank you for your support. At the moment i have the following setting:
label based menu
- General: Insertion Type "value" from a list of ID's for the menu-items to a dedicated cell (current menu ID, say tab1!$A$1)
- Behavior: Selected item (position) fixted to item 1
hidden combo box
- General: Insertion Type "position" to a dedicated cell with the current choice (say tab1!$B$1)
- Behavior: Selected item (position) to the same cell (tab1!$B$1)
Can you give me a hint on how to connect the two components according to your solution, so that the label based menu sets the default for the hidden combox box only in case, that the reset button is pressed?
Thanks,
Oliver

I have another account and my ipad with this account and the password i forget it and the reset question i need help my ipad need active to open thank

my password

i have another account and my ipad with this account and the password i forget it and the reset question help me my ipad need active to open and i know my account name

I can't make purchases with my Apple ID becuase I don't know the security questions and the reset password is old and doesn't exist anymore. What should I do?

I can't make purchases with my Apple ID becuase I don't know the security questions and the reset password is old and doesn't exist anymore. What should I do?

Per the quote below from If you forgot the answers to your Apple ID security questions - Apple Support
contact: Apple ID: Contacting Apple for help with Apple ID account security - Apple Support
If you can't reset your security questions
Contact Apple Support in either of these circumstances:
You don't see the link to send a reset email, which means you don't have a rescue address.
You see the link to send a reset email, but you don't have access to email at the rescue address.

Re: fortecgi and the POST method

DAVID A. TRIGO wrote:
Has anyone successfully used the forte CGI program using the POST
method from a form? I've had success with PUT, but fortecgi seems to
have a problem when the HTML form uses POST.
I'm running Netscape Enterprise Server 3.0 on Solaris 2.5
thanks,
David Trigo
Allmerica FinancialDavid --
Can you be a little more specific about what you mean by "fortecgi
seems to have a problem when the HTML form uses POST"? What kind of error
messages do you get? What do they say?
For instance, the following code works fine:
tag code in "somepage.htm" ...
<form method="POST" action="$$FORTE.ExecURL">
<input type="hidden" name="ServiceName" value="SomeService">
<input type="hidden" name="TemplateName" value="next_page.htm">
<input type="hidden" name="HiddenParam" value="dog">
<div align="center"><center><p>
Type some junk here: <input type="text" name="junkTxt"
size="20">
</p></center></div>
<div align="center"><center><p>
<input type="submit" value="Submit" name="submitBtn">
<input type="reset" value="Reset" name="resetBtn">
</p></center></div>
</form>
in "next_page.htm" ...
<?forte execute TestThis ResultSet="StuffRS">
<table border="1" width="43%">
<tr>
<td width="100%"><p align="center"><strong>STUFF</strong></td>
</tr>
<tr>
<td width="100%"><p align="center">$$StuffRS.firstWord</td>
</tr>
<tr>
<td width="100%"><p align="center">$$StuffRS.secondWord</td>
</tr>
</table>
up in Forte World, in your HandleTag method ...
firstItem:TextData=new;
secondItem:TextData=new;
if Tag.Compare('TestThis', ignorecase=TRUE) = 0 then
firstItem = request.FindNameValue('junkTxt');
secondItem = request.FindNameValue('HiddenParam');
rset.Add('firstWord',firstItem);
rset.Add('secondWord',seconditem);
The end result should be a table with 2 entries -- whatever you typed in
the text box and the hidden string "dog"
Dr. Daniel Marcus
Sage IT Partners, Inc.
353 Sacramento St., Suite 1360
San Francisco, CA 94111
415.392.7243 x357
[email protected]

This works:
<FORM METHOD="post" ACTION="http://localhost:9704/analytics/saw.dll?" ENCTYPE="application/x-www-form-urlencoded">
<input type=hidden name=Cmd value=Answers>
<input type=hidden name=nqUser value=Administrator>
<input type=hidden name=nqPassword value=Administrator>
<input type=submit value="Answers">
</FORM>

Trying to create a pdf from an HP G85 scanner and the G85 is not showing up as a device for Adobe

I have windows 7 (new) and adobe 8 professional. I was trying to scan from my HP G85 all in device and adobe was not recognizing any devices to scan from. Can someone please offer advice.

@kvolk6oldbarn –
The G85 works for me in Windows 7. I have Windows 7 Home Premium (new about a week ago) and Acrobat 8 Standard. I can see my G85 AIO from Windows (Control Panel\Hardware and Sound\Devices and Printers). If you’re still having trouble connecting to it, I suggest the Microsoft Compatibility page for the G85:
http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type=Hardware& p=HP%20Officejet%20g85%20All-in-One%20Printer&v=HP&uid=C6737A&pf=9&pi=4&c=Printers%20%26%2 0Scanners&sc=Multifunction&os=64-bit
You might also check out the related discussion about connecting to the G85 at “See what others are saying about this product in the Windows 7 Answers Forums” where they also discuss access to some of the other functions (eg fax); that’s at:
http://social.answers.microsoft.com/Forums/en-US/w7hardware/thread/79d670dc-36b8-4303-9adf -909f839c4d90/
Once you’re connected, the settings I use to get reasonable scanning speed are Native and Show Scanner’s Native Interface. That’s in the Scanner Options dialog (get there from Create PDF > From Scanner > Scanner Options). The only interface I have available is WIA (in the scanner pull-down to the left of the Scanner Options button). The resulting scanning behavior is about 4 stutters as it scans a page – that is, the scan bar moves a few inches, backs up about 1/2 inch, then goes another few inches, etc. That’s about what I saw in XP, so it looks nearly the same to me.
Good luck.
P.S. if HP tech staff are watching: Acrobat has a lot of trouble driving the scanner if the settings are instead Native/Hide. The behavior then is the scan bar goes about an inch, backs up 7/8 inch, goes another inch, etc. That’s so painful to watch I’ve never let it continue to see if really would make it all the way down the page.

I dont know what to do!!! I pulled out my headphones and then saw that my sound was not working correctly. I was horrified to find a piece of the headphone never came out. I have heard how much it costs to repair and the other methods are not working.

Please help, i am so scared that i will never get my laptop back the way it was.

"the other methods aren't working"
Well, what other methods have you tried that didn't work? Frankly, your post reads as a hoax, but I have some extra time on my hands, and an idea. Make an appointment with the Apple Genius at your local Apple store. You could also bring your MBP to an AASP. Regardless, either one should be able to remove the bottom cover, and use a plastic thingy (dang, what is that tool called?) to push out the offending bit.

I forgot the answers to my security questions, and the reset e-mail was never sent. How do I notify apple that they never sent me the reset e-mail? Thank you.

I'm trying to download apps on my new iphone 5s, and I forgot the answers to my security questions. The reset e-mail was never sent. How do I notify apple that they never sent me the reset e-mail? Thank you.

Hello there, movies989.
The following Knowledge Base article provides some great steps for issues with Apple ID security questions and contacting Apple Support:
Apple ID: All about Apple ID security questions
http://support.apple.com/kb/HT5665
Of particular use in your case:
What should I do if I don't remember the answers to my Apple ID security questions?
Try answering them at least once to see if you can get them right, even if you are not sure you remember the answers to your security questions.
If you are confident you can't remember them, try one of the following:
If you have three security questions and a rescue email address
sign in to My Apple ID and select the Password and Security tab to send an email to your rescue email address to reset your security questions and answers.
If you have one security question and you know your Apple ID passwordsign in to My Apple ID and select the Password and Security tab to reset your security question.
If you have one security question, but don't remember your Apple ID password
contact Apple Support for assistance. Learn more about creating a temporary support PIN to help Apple confirm your identity when you contact Apple Support.
Note: If you have forgotten your password and answer your security questions incorrectly too many times in a row, you will be unable to try to answer your security questions for a period of time. During that time you will not be able to reset your password and will not have access to your account.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Ipad wont turn on and the reset will not work. when i connect to computer, it is not recognized. what next?

my ipad will not turn on and I have tried the reset process and I have tried to connect it to my computer but it is not recognized by the computer. Not sure what else could resolve this issue and get my ipad to reset?

Did you try to get it working on another computer, see if that does it. BTW have you re-charged it using the 10w power adaptor, it might be out of power.
there's also a possibility that it may be a battery issue. contact apple if problems persist.
- Good Luck

XmlBean usage and the clone() method.

I'm trying to use the XmlBean class as the superclass for all our business objects and we have an issue with the usage of the clone method.
Basically our business objects all throw the CloneNotSupportedException (as per Object.clone() signature) while XmlBean.clone() does not throw it. Introducing XmlBean into the hierarchy will cause quite a bit of effort to change clone() signatures for a lot of classes. So, we were wondering if there is any alternative to subclassing XmlBean while at the same time using the efficient caching that it gives us. I guess I'm looking for a "composition" approach rathe than an "inheritance" approach that might work.
Has anyone faced this issue and is there any other workaround?
Thanks,
--Das

The reason that I asked is that the exception is "old baggage" from a design flaw in the original JDK 1.0 .. it is a checked exception that can never happen on an object that implements Cloneable, so if you don't throw it, and you implement Cloneable, then it won't be thrown on clone().
Peace,
Cameron Purdy
Tangosol, Inc.
Coherence: Shared Memories for J2EE Clusters

Scanner and the reset() method

Similar Messages

Maybe you are looking for