Scanner appears but can't scan into A3

Is there a way to have Aperture not go to import option when I turn my scanner on? I do use the Hot Folder, but A3 still opens the import window when I start the scanner.
Thanks.

A3 can't import from a scanner. It's best to use scanning software then import. You could set up a "hot folder" using automator and scan to that so the images are automatically imported to Aperture when they're scanned.
DLS

Similar Messages

I just hooked up my Canon MP830 printer/scanner/fax to my MAC and can print but can't scan. Anyone out there know what to do with this?

I just hooked up my Canon MP830 printer/scanner/fax to my MAC and can print but can't scan. Anyone out there know what to do with this?

Have you downloaded the approriate Snow Leopard drivers for that printer? Make sure you get the appropriate and latest MP Navigator, as you start scans from the computer, not the all-in-one. Get them from http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_s eries/pixma_mp830#DriversAndSoftware

HT4623 I have a 1st gen iPad. Upgrade to iOS 6.1.1 appeared, but it quit shortly into it and now I am being told that all software is up to date at 5.1.1! Synced iPad to the iMac and it also says the iPad is up to date. What gives?

I have a 1st gen iPad. Upgrade to IOS 6.1.1 appeared, but it quit shortly into the installing and has not come back up again. Both the iPad and when synced to the iMac, say i am fully up to date at 5.1.1! Has anyone had / got the same issue? How can I upgrade when it doesn't acknowledge there is no need?

You are most welcome

I have an apple i phone that is disabled because cant remember the password to get into the phone i was told to sign into i tunes to be able to unlock my phone. i have i tunes i get into on my i phone but can not get into it on my computer??

i have an apple i phone that is disabled because cant remember the password to get into the phone i was told to sign into i tunes to be able to unlock my phone. i have i tunes i get into on my i phone but can not get into it on my computer??

Hey grandkids7k,
Thanks for the question. The following resource provides troubleshooting information if you have forgotten your passcode:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
If you have never synced your device with iTunes, or you do not have access to a computer
If you see one of following alerts, you need to erase the device:
"iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
"You haven't chosen to have [device] trust this computer"
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
Alternatively, place the device in recovery mode and restore it to erase the device:
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the Connect to iTunes screen.
5. iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
Thanks,
Matt M.

I am a first time user trying to download a movie to my PC. I created and verified my apple ID, but can't get into the itunes store.

I am a first time user trying to download a movie to my PC. I created and verified my apple ID, but can't get into the itunes store. Please help.

Why not? What, if any, errors are occurring when trying to access the itunes store?
Is iTunes actually installed?

Can Printer over network but can't scan over network with Officejet 6500 E710n

Got an odd problem... I can print all day via my wireless network, I can even ping my printer's IP with no issues.
I can't scan at all, it keeps giving me connection related error messages (Scanner Unreachable, etc). I checked the "Update IP Address" tool and the IP address was correct. So I figured I would install on a different computer.
I installed using the software from this website (I have never installed this HP printer on this computer, I always did eprinting from this computer), it worked perfectly, it found the printer almost instantly. Installation worked perfect with no issues, errors, etc.
Printed the test page perfectly but I still can't scan over the network, I tried both clicking on "HP Officejet 6500 E710n-z" and clicking on both "Scan a document or photo" and "Activate Scan to Computer" and also I get a connection error if I try the "HP Scan" software.
I ran the "HP Home Network Diagnostic Utility" but it can't find my printer (odd that it found it to install the software and I can print/ping it all day).
I also ran the "HP Scan Diagnostic Utility 4.2" and it DID find the printer... It also got past the "Connectivity" and "Device Manager" steps and put a check next to them.
It then failed on the "Windows (WIA) Scan" step. I skip it and it fails on the "HP Twian Scan" after giving me a connection related error message. It will not let me continue the test.
I have restarted both computers and printer multiple times. I am running Windows 7 on my laptop and Windows XP on my desktop.

I suggest uninstalling the full feature software from both PCs and re-installing and configuring the software on both.
Are you using the HP Solution center to scan? It is in Dutch, but the images are the same as what you should see in a correctly installed full feature software package.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

How can I Scan into CS5.5photoshop via file import command

I recently bought a new 27" iMac running OSX 10.8.2 (Mountain Lion). I brought over all my files, including applications from my backup disk. I had no trouble running Photoshop CS5.5 and printing any pictures I had imported from my cameras. The Twain plugin that I use is the same one that I was using in my previous iMac running OS 10.6.8. I had a similar problem with it when I had updated from OSX 10.5 which was solved with updating the Twain plugin. There were some differences in that the scanner showed up in the import command, but could not be accessed. Here no scanners show up at all!
By using the EPSON Scan application, I can access and scan, producing a variety of file formats, but it does not integrate with the Photoshop program. Also, my OCR program is also dead in the water. I can also use the scanner from within the Print & Scan prefernce pane, but this only lets me get a jpeq result.
I followed all the directions regarding updating the scanner S/W and Twain plugin with no luck. I cannot access the sanner from within photoshop.

You may have to run Photoshop CS5 in 32 bit mode if the Twain and Epson drivers are 32 bit.
Click on your Photoshop CS5 app icon to select it, context or right-click on it, select "Get info" or choose File > Get Info from the Finder menu.
In the dialog choose "open in 32 bit mode"
The 32 bit version should be able to use the Twain plug-in and scanner drivers.

I need to get into my old account and get my addresses and then cancel the old account but can not get into it. Had to change my user name when I moved and now I can't get into Firefox. Can't remember the old password. What to do??

I moved during the summer. I changed to highspeedand & when I set my computer up it told me that my email address was already in use so I had to change it(????) I changed from jkady to [email protected] I tried to change it on firefox but it would not except the new name and I could not get into my old account.I need all my addresses and would like to cancel the old account but I can not get into it. This is very frustrating!!!!! I need my addresses!!!!!!!!

I logged in changed the primary E-Mail address to a different one, vertified it then tried to log in it said either to send an E-Mail to veritify again or to do my security questions, so I choose to do the security questions and put in my Birthday like it asked and it said that it was wrong and I had to authenticate it to get in, why is it so hard to just set up a Apple ID really though!
So I tried the E-Mail to and it has not sent me an E-Mail then I tried to log in again and it has locked me out of my account so I try to recover my password and it gave me the same options to get my password back and both options are doing the same as before, it says I don't know my on birth date or it is wrong or needs authenticate it, then the E-Mail doesn't come through!
This is just stupid now.

I changed my apple id password, but can't log into my apps

I have been trying for days to get my apps on my iphone working, I forgot my password, and made a new one, I can sign into Apple on my pc but when I try and sign in to itunes store???? Do I use a different password for this? Help would be appreciated...
Thanks
Joyce

I went to settings and am not sure how to update the password, I changed it with Apple on my pc but still can't log into my itunes apps????

Keyboard found/working - but can't get into setup in system preferences

Hi,
I've had the Apple Wireless Bluetooth Keyboard (the flat aluminum one) for about a year. It works great, but recently want to see if I could modify some keys.
Wen into System Preferences, clicked "Set Up Bluetooth Keyboard" and it just searches for the keyboard forever, but never finds it.
Weird thing is if I go into bluetooth pref pane keyboard is there and paired, and as I say works fine. I don't know if I can re-map any soft keys / function keys with this keyboard (because I can't get into prefs) but I would like to find out!
TIA...Larry

Hello Larry:
What are you trying to do? You can change KB shortcuts, but you cannot make a "K" key become a "Y" key.
Barry

I can print but can't scan

I have a HP Officejet Pro 8500A. I can print but I can't scan. I am running windows 7. I am attempting to scn by clicking on the icon. When I click the icon, I get this error message: "The HP Officejet Pro 8500 A 910 was not found". Please help.

MurryLaw
Welcome to the HP Community Forum.
Icons are nothing more than links to programs -- and a link is a pointer, not an actual program.
It may be that the printer software is not working properly or that the Icon you are using is just not connected, that is, pointing to -- anything useful.
You can perhaps correct the whole mess by installing (reinstalling) the Full Feature Software for the printer. The installation process may take care of the broken Icon and whatever else is going on elsewhere that is keeping the scanning function from working properly.
General Instructions to Install the Printer Software
Reminder:
In most cases, the Solution Center has been replaced by the Printer Assistant.
The Printer Assistant shortcut will be installed on your Desktop during the last part of the installation.
Windows Operating System:
Create Restore Point: Create a Restore Point – Win7 OR Create a restore point Win8
Open HP Drivers & Downloads
Enter your Printer Model information
Select your Printer from the “Results” list
OR
Open HP Officejet Pro 8500A e-All-in-One Printer series - A910
Enter your Operating System in the Drop-down menu
Click NEXT and Scroll down
Look for category Driver - Product Installation Software
Select the Basic Driver, e-print, or Full Feature Software
Save the *.exe installation package(s) on your computer
The file(s) will likely save to the "Downloads “folder.
Be sure to look for Updates as needed for your installation. If available, you may download the Print and Scan Doctor and / or other programs from Category – Utilities.
If you have ‘Admin’ control, you may highlight the package and “double-click” to install it, else Right-Click, Select run as Administrator and install.
NOTES:
Look at the bottom half of the main webpage for your printer for helpful videos to assist with the installation of the printer software!
Scroll the video list back and forth until you find the video that most closely matches your situation.
If using a USB connection: Download and install the driver software before connecting a USB cable.
Ethernet: Connect the printer to the network and (Optional) assign the printer an IP address at the router. Once the printer is connected to the network, be sure the printer is switched on and then install the printer software.
After the initial installation is complete and working, check / install Category - Update
There is valuable information at the support website, including sections for Manuals, Troubleshooting > How-to, Troubleshooting > Solve a Problem, plus alerts and notifications for your printer. Be sure to take an extended look at what is available. Bookmark the page.
Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
Click Accept as Solution when the Answer is a good Fix or Workaround!
Although I strive to reflect HP's best practices, I do not work for HP.
Kind Regards,
Dragon-Fur

I have a photosmart plus B209a but when I scan into my PC i only have the option of sending it to p

B209a when I scan a document into my computer I only have the option of sending it into my pictures, I cannot send it to documents or to Adobe reader. As this is not something I need very often but once in awhile I need to convert a document into PDF format but now I cannot do that and I do not want to pay for Adobe reader in order to covert into PDF.
I used to be able to scan and send it in Email but now I cannot even do that even if I save it as a file.
Any suggestions please. My computer is pavilion Elite HPE 150f using IE8 windows 7 64 bit purchased last April.

I had a nasty problem a week or so ago (nothing to do with your issue). I decided to reset the iPad back to factory level. I then restored it using a backup that I had made before the problem. Turns out that I did not need to do that but,......finally getting to the point , I started with 7.2 GB free and wound up with 8.4 GB free. I did not lose anything and I have no clue what caused me to recover that space. In any event, I am babbling on about this in case it might be of help to you.
Oh, I do know some apps cache stuff, but very few allow you to clear that cache.
Barry
edit: I forgot to suggest that you reset the iPad by holding the power and home keys down until the Apple logo appears.
Message was edited by: Barry Hemphill

I can print, check printer utilities etc but can't scan

I am running Mac OS 10.6.3 and using an HP Photo Smart 2575 all in one.
I can print, check printer utilities and make the printer make sounds as if it is scanning. I get a window which asks me what I am scanning and whether I accept the image, I've tried various diff options to no avail.
I've tried asking for the scan both via the printer buttons and computer, each time I can the New scan pro window appear, suggesting the computer is talking to the printer.
Each time nothing happens and I get an Sorry unknown error occured message.
I have scanned before, I don't know what I did right then.
Its likely I've updated software since then.
I went to the HP web site and down loaded what looked recent, I got a new image zone icon and a request to register with HP yet again, but made no progress.
The off button on the printer usually does not work at it just flashes, so I tried restarting the computer and unplugging the printer plug. I just managed to turn the printer off via the off button, it worked but had no effect on scanning ability.
Any ideas?

Never mind! I just had to change the settings to indicate that it was wireless. It's all good!

New Message icon appears - but can't find messages

I have the BB Curve 8330 and have the "new message" icon at the top of the screen saying I have 7 new/unread messages but I can't find them anywhere! I have checked all of the folders, deleted and re-added my email account, and was on the phone with Sprint for over an hour today and they were not able to help me.
I had this problem about 6 months ago and I think the lady told me that it was something to do with saving the messages to the server - but I have made sure that I am saving them to the server and still can't get it fixed. The last tech had me go to Options -> Mobile Network -> Start Provisioning....I did this but then another "new" message appeared that I can't find. The weird part though, is I can receive and send emails to friends and other folks, just can't get these emails off the phone. Can someone please help me??
Thank you so much!!

Tips for clearing that unread message... try them in order.
If you have a rogue New Message icon on your Homescreen, or a negative count (-1), any one of these solutions could clear it, or reset it to zero:
Try these options:
* Open your main Messages folder and highlight today's date, click the menu key and select Mark Prior Opened.
* Hard Reset the BlackBerry by holding ALT, CAP (right Shift key), and DEL (or with the BlackBerry powered ON, remove the battery and reinserting the battery)
* View Messages > Saved Messages
* View Messages > View Folders, check each folder (missed calls, SMS in and out boxes, MMS in and out boxes, Saved, browser, phone logs etc)
* Scroll to top of message folder, over the date heading, click or press menu to MARK PRIOR OPEN
* Change your theme and see if it persists, and change back to your desired theme. (Options > Theme > select.)
* Connect to Desktop Manager > Backup/Restore > Advanced. On the right-hand pane is the list of data on your device. Scroll to the email messages database and highlight it, then below, select CLEAR. This will clear your device of all messages.
* Wipe and reload your OS.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Digitally signing using Acrobat XI and Mac OS 10.9.2- won't let me type signature- the box appears but can't adjust font or any other aspect of text.

I just purchased Acrobat XI pro for Mac. I have OS 10.9.2 When I got to digitally sign, it only allows me to sign using certificate- which does not render a legible name- and is an apple authorization certificate. Or if I go to "type text" the only type showing in the box is Helvetica 12. I can't adjust that. then I put my name in and that's it. It does not look like a signature. I was hoping to insert an image
or at least have it look like a signature.
What can fix this?
Darcy

When I click "place signature" I only have one option.
It asks me "How would you like to create your signature?
The only option available to me is "use a certificate- When I attempt to use another option there are some but they are not available to me."use an image" draw my signature, or type my signature
are not available.
For that reason I went to preferences to see what I could do to change the settings- and all I could do was manage the certificate signature- so that it looks better than it did.
As an aside- after doing that- the document went on and the person couldn't sign because it had an "open password" If you also know about that- that would be great.
This is the only reason I purchased the Adobe XI so I could draw my signature or type it and have it appear as a signature.

Scanner appears but can't scan into A3

Similar Messages

Maybe you are looking for