Scanner communication cannot be established

My internet provider recently upgraded my internet service. They provided me with a new "all-in-one" modem and router. Since then, everytime we shut down and restart the modem/router, my scanner stops working. Printer and fax works fine. Error message is "Scanner communication cannot be established". My computer is connected to the printer wirelessly. The only way I've figured out to fix the problem is to re-install the software and driver, but this is annoying to have to do everytime.

Similar Messages

I'm having a "Scanner communication cannot be established" error when trying to scan to my iMac.

Hi,
I have an HP OfficeJet 6700 Premium printer connected via wireless to my iMac running the latest version of OS X Lion. I can print with no problems but when I try to scan using HP Scan 3 I get the "Scanner communication cannot be established" error plus the following additional information...
"HP Officejet 6700 is currently unavailable. Ensure your device is powered on, check the connection, and ensure your network is functioning properly. If these conditions are correct, restart the device and try scanning again"
Scan to Computer in HP Utility is enabled and other features as well and they work fine but when I use HP Scan 3 to scan there's no way I could get it to work. I tried rebooting my iMac and the printer. Also I have the latest drivers and firmware installed. Please advice.
Yours,
Ramón

Is the HP software on your Mac the right version for Lion?
Download and install this: http://support.apple.com/kb/DL907
Try scanning from Image Capture in your Applications folder. Select your scanner on the left, then click "Show Details" and finally "Overview" to start the process.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Scanner communication cannot be estableshed

HP Officejet Pro 8620
Windows 7 Pro 64bit
Just installed the printer. When I try to scan from the computer, I get the message that scanner communication cannot be established. I have run the CD and down loaded the software twice. Don't know what I am doing wrong.

Hi
As I understand you are not able to scan.
Kindly click on the following link to resolve the issue.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04090234&tmp_task=solveCategory&cc=us&dlc=en&la...
Though I am an HP employee.
Please click the “Kudos Thumbs Up" on the bottom right of this post to say “Thanks” for helping! or click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

My Iphone won't receive or send email, "data communication cannot be established since a call is currently active"

Suddenly my phone will not receive or send email. It tells me that "data communication cannot be established since a call is currently active" It is burning the battery like crazy.

Drove to the nearest Verizon store after work, not close by either. Unbelievably simple, he removed all of the gmail info as if it never excisted, put it back in and viola...everything works. Cancelled my Genuis Bar appt for Monday as all is working. Why the other Verizon guy couldn't help me over the phone is beyond my comprehension.
Thanks for all of your help. It has been rather stressful especially not being able to swipe credit cards.
For what it's worth, this fellow told me if I have trouble like this again to eliminate the gmail account on the iphone and install the google app which he said works much better than the email app that came with the phone.
Best wishes.

Scanner communication can not be established

At the time of software installation, my HP M467dw worked fine without a hitch. I connected via ethernet cable to home network. The following day I attempted to scan from the desktop, however I continued to get the the message that the scanner communication could not be established, and try this and that. I have researched this to no avail, and found the only solution is to uninstall and reinstall the software, only to loose the scanning ability noted above after cold boot. I am able to print, and also able to scan and fax on the HP device. The printer and scanner appear to be using different ports so issue is not localized. I would appreciate any information which may lead to a resolution. I am running Windows 7 64 bit. and the HP software is compatible.

Hey Krusador,
Welcome to the HP Forums!
The troubleshooting steps that have already done are excellent! I have included the document 'In Windows 'An error occurred while communicating with scanning device' Message Displays When Scanni...'. I know some of the steps you have already completed, please follow through the document, and complete the steps that you have not.
Please let me know the outcome of the troubleshooting.
Thank you.
I worked on behalf of HP

A connection to the SharePoint site cannot be established. To synchronize or refresh your list, you must be able to connect to the SharePoint site

Hi,
I have a SharePoint 2010 farm with two Web Applications.
For example:
https://contoso.domain.com
https://finance.domain.com
Both Webapp use https --> 443. Same valid certificate for both (*.domain.com)
I tested exporting an Excel library in https://contoso.domain.com.
It export and sync up sucessful the Excel library and it updates it OK.
However, once exported the Excel library in https://finance.domain.com, when
I try to syncronize or update the library I receive an error back, which indicates: "A connection to the SharePoint site cannot be established. To synchronize or
refresh your list, you must be able to connect to the SharePoint site". I had tested the WebDav (Map Network Drive) and the connection results OK.
Do you have any idea about this issue?? Why https://finance.domain.com do not
synchronize or refresh in excel o SharePoint site???
I had tested the security with IIS, SSL, WebDav.
Thank you,
Gaby

Hi!!!
I solved this problem.
I created a new Application Web in the farm (https://project.domain.com), dismount content database the old application web ( https://finance.domain.com)
and the new application web (https://project.domain.com).
#New AppWeb project.domain.com
Get-SPContentDatabase -WebApplication https://project.domain.com | Dismount-SPContentDatabase -WhatIf
#Old AppWeb
Get-SPContentDatabase -WebApplication https://finance.domain.com | Dismount-SPContentDatabase -WhatIf
Mount the old content database to the new application web (https://project.domain.com).
Mount-SPContentDatabase "WSS_Content_Finance" -DatabaseServer "MyServer" -WebApplication https://project.domain.com
If you want to keep the same url, change the alternate access mappings.
Remember to change the bindings in IIS.
Hope you help the solution...
Gaby

I'm trying to update iphone 4s to 5.1 but when plugged into Itunes it says network connection cannot be established and error downloading 5.1

I'm having trouble updating software for my iphone 4s from 5.0.1 to 5.1 but each time i plug into itunes to download it says network connection cannot be established and the phone just says an error has occured. What can i do?

If you don't have iOS 5, plug your iPhone into your computer, select it in iTunes, and in the Summary, click Check for Update.
If you do have iOS 5, it has onboard updates so you don't have to plug it in, just go to Settings, click General, click Software Update and you will be presented with iOS 5.1 which came out a few hours ago. Both my iPhone 3GS and iPad are already updated to iOS 5.1 now.

How to debug - Connection to the server cannot be established

I get a error message when trying to use the
ColdFusion Report Builder Report Creation Wizard
When I go to create my Query I get
[ColdFusion Report Builder] The Connection cannot be
established [Ok]
I cannot find a error log or any kind of help document to
find out why The Connection cannot be established.
I setup a localhost coldfusion test server with the exact
same settings as my remote server and I can connect to the test
server but the remote server will not work.
Where do I start please help I'm on a time sensitive
project?

Check the error log, The production servers have RDS
disabled.

"Back to My Mac is turned on, your VPN connection cannot be established"?

Hi,
I searched for this recurring notice that I am getting " Because Back to My Mac is turned on, your VPN connection cannot be established", and came up with this thread: http://discussions.info.apple.com/message.jspa?messageID=8436720
However, I am not trying to establish a VPN when I get this message (and don't have one AFAIK).
Any idea what might be causing this message? I can't seem to figure out what triggers it, it just seems to pop up every hour or so. iChat is the only thing I have been using recently that seems to
Is there any way to discover what VPNs my laptop has set up? I don't have any additional software that is specific to VPNs, so it would have to be something already built into the OS. Does the Transmission application create a VPN? That is the only thing I can think of.
Any other ideas on what might be causing this message?
Your help is appreciated!
A.

If you have a VPN installed (by mistake?) you should be able to go to your System Prefs > Network and see the VPN listed in the left hand column along with Aiport and Ethernet. You can un-install by using the minus button at the bottom of the column.
The link provided shows you how to install a VPN client with screen shots, including one of this Network Prefs screen and what a VPN client looks like.
https://www.publicvpn.com/support/MacOSX105.php

AnyConnect 3.1.01065 error - Failed to install AnyConnect VPN Profile because of file move error. A VPN connection cannot be established.

I've got a user running:
AnyConnect 3.1.01065
on
Windows 7 64bit.
Several weeks ago she started encountering the following error:
-after logging into Windows and launching the AnyConnect client, she enters her username and password and successfully authenticates.
-the connection is not established and she's presented with the following message: "Failed to install AnyConnect VPN Profile because of file move error. A VPN connection cannot be established."
After doing some troubleshooting, inlcuding uninstalling/reinstalling the anyconnect client, it seems the culprit is the following file:
C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile\<filename>.xml. When the problem occurs (which is not regularly, sometimes it occurs daily, sometimes just once a week) examining that file indicates it has no security or permissions set. Quitting the AnyConnect software, modifying the file so that the user has full control of it, then relaunching AnyConnect fixes the problem (until it happens again). Uninstalling, and making sure to move C:\ProgramData\Cisco to the trash, then reinstalling did not seem to help.
The closest match in these forums is the following thread, https://supportforums.cisco.com/message/3760446 - though no clear resolution was given.
Has anyone else encountered this, and been able to fix it?
Thanks much.

Just FYI, it seems at least in this case, purging all the previous system restore points seems to have resolved this issue...

JDBC Communication channel : Error establishing socket

Dear friends,
Im using JDBC comm channel. JDBC driver has been insatlled for SQL Server 2000 (SP3) .
However for the JDBC comm. channel i get an error
"SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Error establishing socket.'
following parameters are used :
JDBC driver: com.microsoft.jdbc.sqlserver.SQLServerDriver
DB connection :
jdbc:microsoft:sqlserver://<ip address>:1433;databaseName=<dbname>
i looked up some blogs in SDN, & tried some other options,
eg: com.microsoft.sqlserver.jdbc.SQLServerDriver
DB name:
jdbc:microsoft:sqlserver://<ip address>:1433;DatabaseName=<dbname>
However still get the same error
Can somebody help ?

Hi
The following should fix your problem
I had this problem using SQLServer 2000 Driver for JDBC and finally solved it. Here's what I did:
1. Make sure that SQL Server is set to mixed authentication. To do this, open enterprise manager, right click on server/properties; go to security tab and select SQL Server and Windows Authentication. Apparently, the driver from Microsoft cannot handle windows integrated authentication.
2. Keeping the server properties dialog up, go to the general tab and push the network configuration button. Enable TCP/IP (it is disabled by default). If you wish, press properties to change the default port (1433).
3. Add an SQL Server login account (NOT a WINDOWS account (see 1)). You can also use your sa account, but I don't recommend it.
4. Use the login setup in step 3.
Some final notes:
(1) I've seen ads for third party drivers that can use Windows integrated authentication. Try one if you need this feature.
(2) One responder suggested telneting to port 1433 to verify TCP connectivity. The connection is refused on my machine even though I can connect through the driver. And this is how it should be; otherwise there'd be a security risk.
Courtesy:XI installation Configuration of J2EE engine problem
Regards
krishna
Note:Reward points if helpful

Please help. I have just purchased a Mustek A3 usb 2400 scanner and cannot find drivers for maverick

I am very frustrated ... have spent two hours searching for drivers for a driver for this scanner ... no idea what to do.
Would greatly appreciate any help.
Thank you.

I can now see it in Image Aquire ... image capture does not see it nor does VueScan.
Image aquire is a horrible program. It crashes continually.
I still have no idea where the driver files that I have downloaded are. I cant find them anywhere. Admittedly I know very very little about how the computer runs ...I just use the programs. And, I believe reasonably, that when I purchase a product that it will work on my operating system. The business that I purchased from will be open tomorrow and I will ring them. If I cannot sort this out I will have to return it.

Regarding Scanner Object -- Cannot Resolve the Symbol

Hi,
I am new to Java, as well as this Forum.
Today I tried with Scanner object. But it shows Error.
My Code:
import java.util.Scanner;
public class CourseGradeBookTest
*     public static void main(String args[])*
*          Scanner input=new Scanner(System.in);*
*          CourseGradeBook CGB=new CourseGradeBook();*
*          System.out.println("Course Grade Book");*
*          String NameofCourse=input.nextLine();*
*          System.out.println();*
*          CGB.displayMessage(NameofCourse);*
Errors:
CourseGradeBookTest.java:1: cannot resolve symbol
symbol : class Scanner
location: package util
import java.util.Scanner;
*^*
CourseGradeBookTest.java:7: cannot resolve symbol
symbol : class Scanner
location: class CourseGradeBookTest
Scanner input=new Scanner(System.in);
*^*
CourseGradeBookTest.java:7: cannot resolve symbol
symbol : class Scanner
location: class CourseGradeBookTest
Scanner input=new Scanner(System.in);
*^*
*3 errors*
I went through the Previous Questions which were related to My Question. I checked with My Java Version..its java version "1.6.0_02"
Can You please help Me to get out of this problem.
Regards
Rajan.

hi
i think u didnt set path currectly.
u can set path in two ways.
1) By Using Environmen Varibles
2) By Creating .bat file.
for creating environmental variables
right click on MyCompueter->properties->Advanced->Environment Variables->
System vaibles.

Canon MX310 scanner communication error with OS X 10.5.8

Does anyone have ideas to solve the Canon MX310 error message, "Cannot communicate with scanner." I'm running Canon MP Navigator EX 1.0. My MX310 prints & copies wirelessly using an Airport Extreme w/o difficulty. I have checked that the USB cable is connected, printer is ON and tried a shut down of both computer & printer then restart which didn't resolve the issue. The error id might be 155.0.0. I don't get any other error messages generated from OS X. Thanks!

http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mx_s eries/pixma_mx310#DriversAndSoftware has drivers for 10.5 Did you try downloading them?

Ni-fbus communications cannot connect interface

I am using NI-FBUS Communications Manager 3.2 with a NI PCMCIA-FBUS Series 2 card in a Ricoh R/RL/... series PCMCIA adapter on a desktop computer. I enabled the PCMCIA card via the Interface Configuration Utility. When I start the Comm Manager, I get the following error message:
NI_FBUS Communications Manager cannot connect interface 0 on the fieldbus board 1. Click OK to.....
Windows sees the Ricoh adapter card and the Series 2 card as working properly. If I install the Series 2 card in a laptop, the Comm Manager starts properly. The same series 2 card and Ricoh adapter card has been used in another desktop computer also running XP SP2.
How do I get this combination up and running?

I tried the PCMCIA card and adapter card in another computer running XP and NI-FBUS Communications Manager 3.1.1. The combination worked properly; the card was seen and the Comm Manager opened. When Configurator was opened, the device attached to the link was seen.
Is there a compatibility difference between Comm Mgr 3.1.1 and 3.2?

Scanner communication cannot be established

Similar Messages

Maybe you are looking for