Scanner Driver/Sofware for HP 1315 All in One on a Windows 8.1 system

Since I've up grade to a new computer with Windows 8, life has been VERY hard on on my HP 1315 All in One. I've final found the pritner driver but the scanner is not functioning - Where do I find a driver/software download.
Don't tell me a need a new scanner.

Hey there @SierraGulf ,
I just noticed your post and wanted to link you to the drivers and software download page for your PSC 1315 on Windows 8.
Here you are: HP Deskjet and Officejet Full Feature Software and Drivers
Best wishes
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

Looking for HP Basic Driver only for hp 2610 all-in-one printer

I have windows 7( Just recently installed) and a HP 2610 all-in-one printer.
I just wanted to download the printer driver only and not the HP Photosmart and office software Suite.
This webside say the printer driver only is availble as a separate download named "HP Deskjet Basic Driver"
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-76831-1&lc=en&dlc=en&cc=us&...
But I cannot locate the webside for the Basic driver only for Windows 7 OS. Can somebody locate the web address of "HP Deskjet Basic Driver" for me please.
Regards
Tech

I just tried using Notepad as you suggested and had the same result. Paper feeds in stops at proper place and error message "out of paper"
I just put in two new HP ink cartridges because the other two were low and I was told that this might be the problem.
I seem to remember that the HP 2610 shows 2 "ink icons" in the lower left corner. One for black and one for color. The ink icons would change from completly full to just an outline as the amount of ink went down. Currently the black ink icon is missing
This is a very frustrating problem because the printer works great after doing a few steps to get around the problem. The fact that the problem reoccurs any time anything is changed is the major problem
Most of the problems started when I added the printer to the Windows 7 virtual machine so I could work with Windows XP programs. This may just be a coincidence because the printer still has the same problems when I use the copy function without the computer even being on.
I want to thank you for all of your efforts. Perhaps this is a unique problem that will never be solved and it is best to take my losses and buy a new printer. As a last chance, if possible, could you refer my post to someone who is an expert with the HP 2610 printer.

Driver for HP 6110 All in One Printer for MAC OS X 10.6.8

Your Search: Is the driver for HP 6110 All in One Printer the same for MAC OS X 10.6 as for MAC OS X 10.6.8?

Hi JCWG. To answer your question, Yes the driver is the same. Do you have questions about the install? Just in case you need it, here is the link to take you to the download of the software and drivers. http://goo.gl/njt723;
If you have any other questions, please feel free to write back
Thank you
Waterboy71
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Driver for 1210 psc all-in-one

I need a driver for HP psc1210 all-in-one printer to work on Windows 7 64bit.
Tired the settings change. Can't get nothing to work. Pleae help

In below link, Select operating system as Windows 7 64-bit and download drivers for HP PSC1210 printer. Install the drivers and check if your issue is resolved
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=9076...

Why do I have to continually redown load the driver for my c6180 all in one printer every few months

why do I have to continually redown load the driver for my c6180 all in one printer every few months

Please read this post then provide some details. What operating system? Are there any error messages on the printer or computer screen when printing fails?
Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How can I use my HP 1315 All-in-One scan features on my computer?

I am able to use the printing function from my computer but am unable to use the scanning feature on my printer. I have downloaded the Apple stuff and have searched HP (many features, including a diagnostic test, are blocked by Apple!!) and can't figure out how to use my scanner on the printer. The suggestions from Apple (web help) are not helpful in the least. I have a HP 1315 All-in-One (1310 Series) and the Mac installation disk will not work on my MacBook. Any suggestions will be helpfull. In advance, thank you!!

Set System Preferences > Security : Gatekeeper: Anywhere
Visit HP site, find your necessary software, download and install.
You know where not to download potentially malicious software from right?
How to download and install programs
The install disk is too old, you need the newer software version direct from HP and to apply the update.
http://www8.hp.com/us/en/support-drivers.html
Click Driver and proceed....

Hp psc 1315 all-in-one printer

I have installed a hp psc 1315 all in one printer on my new Mac OS X version 10.9.5.
While I can print without any problems, I don't have access to scan a document from the printer to my computer.
Can anyone help with this?
Thank you.

Hello @annlf
Welcome to the HP Community!
I hope to help you with the scanning concern you have today.
Unfortunately, you will not be able to scan using HP software with your PSC 1315 (older model), on Mavericks (newer OS X), as there is no Full Feature driver (includes scanning software) available.
However, you do have some other options to scan. See this link for your options. Scroll down when the guide loads and select "How do I scan with the driver from Apple Software Update?"
OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
Have a wonderful Wednesday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Re-install software for the C6280 all in one printer... get an error message "can't find file"

need to re-install the software for the c6280 all in one printer. downloaded the latest install package from the HP web site. During the install process, I get an error message .. can't find user/appdata/local/temp/7z256315/setup/.....setup/blocksysuser........
the folder 7z256315 does not exist on the HD.
I also get a message that it can't find PS_A10_02_software.msi.
Windows 7 , C6280 all in one printer. Printer is connected to the router. The desktop computer is connected via an ethernet cable, the laptop/ipad/iphone/internet radio are connected via wireless to the router.
hope you can help
thanks
charlie
This question was solved.
View Solution.

Hi cberistain,
Follow the steps below, and let me know what happens?
Step one: Clear temp directory
Type %temp% in the run or search for programs and files field
Highlight all the files in this folder, and then press the delete key to delete. If you get a message that the file is in use you will need to skip this file(s).
Continue with Step 2 below
Step two: Downloaded and extracted to your system:
1. Download the full feature software and drivers
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-77039-1&cc=us&dlc=en&lc=en&...=
2. Once the download is finished double click on the file to extract the software.
3. When the installation window opens press the cancel button to stop the installation
4. Type %temp% in the run or search for programs and files field
5. Look for, and open the folder starting with 7z (Example: 7zS2356)
6. Right click on the folder, and select Copy
7. Close that window, and all your open windows, and then in the middle of the desktop right click your mouse, and select Paste. This will move the 7z folder to your desktop.
8. Open the 7z folder you just copied to your desktop
9. Open folder Util
10. Open folder CCC
11. Run the uninstall_L4
12. When the uninstall has completed restart the computer
13. Run Disk cleanup from Accessories\ System Tools folder under all programs
14. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
15. Open the 7z folder, and then double click on the Setup.exe file which will be toward the bottom of the open window. Follow the on screen instructions to reinstall your printer.
Let me know if you are able to successfully install the software and driver, and are able to print & scan?
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Not able to install scanner part of 'HP PSC 1410 all-in-one'[SOLVED]

Despite trying instructions in the wiki, checking earlier reports of this problem on the forum and trying on reports from google, I am not able to install the scanner part of 'HP PSC 1410 all-in-one'. The command 'sane-find-scanner' finds it but 'scanimage -L' does not. Also xsane and simple-scan program do not find it. Any help will be appreciated.
(I also tried these entries in the udev sane rules:
ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="4d11", MODE="0664", GROUP="scanner", ENV{libsane_matched}="yes"
"SUBSYSTEM=="usb_device", ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="4d11", PROGRAM="/bin/sh -c 'K=%k; K=$${K#usbdev}; printf bus/usb/%%03i/%%03i $${K%%%%.*} $${K#*.}'", NAME="%c", MODE="0666", GROUP="scanner", ENV{libsane_matched}="yes"
but they do not work).
Some previous threads:
https://bbs.archlinux.org/viewtopic.php?id=107474
https://bbs.archlinux.org/viewtopic.php?id=65431
Not able to install sane-dev from AUR; 'makepkg -s' gives error:
==> WARNING: Cannot find the git binary required to determine latest git revision.
Last edited by rnarch (2012-03-28 05:05:09)

Git was not installed. So I installed it and ran 'makepkg -s' again. It ended with following error:
installing saned.conf in /etc/sane.d/saned.conf...
installing dll.conf in /etc/sane.d/dll.conf...
for dir in artec_eplus48u gt68xx snapscan epjitsu ; do \
/bin/sh ../mkinstalldirs /home/sane-dev/pkg/usr/share/sane/${dir} ; \
done
mkdir -p -- /home/sane-dev/pkg/usr/share/sane/artec_eplus48u
mkdir -p -- /home/sane-dev/pkg/usr/share/sane/gt68xx
mkdir -p -- /home/sane-dev/pkg/usr/share/sane/snapscan
mkdir -p -- /home/sane-dev/pkg/usr/share/sane/epjitsu
/bin/sh ../mkinstalldirs -m 775 -g uucp /home/sane-dev/pkg/var/lock/sane
Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ...
Create each directory DIR (with mode MODE, if specified), including all
leading file name components.
Report bugs to <[email protected]>.
make[4]: *** [install-lockpath] Error 1
make[4]: Leaving directory `/home/sane-dev/src/sane-backends/backend'
make[3]: *** [install-data-am] Error 2
make[3]: Leaving directory `/home/sane-dev/src/sane-backends/backend'
make[2]: *** [install-am] Error 2
make[2]: Leaving directory `/home/sane-dev/src/sane-backends/backend'
make[1]: *** [install] Error 2
make[1]: Leaving directory `/home/sane-dev/src/sane-backends/backend'
make: *** [install-recursive] Error 1
==> ERROR: A failure occurred in build().
Aborting...
Please note the line: Report bugs to <[email protected]>. Is it a bug? Sane-dev was successfully installed by others, eg: https://bbs.archlinux.org/viewtopic.php?id=65431
Last edited by rnarch (2012-03-26 01:11:57)

Psc 1315 all-in-one printer will not feed paper. There is no paper jam.

psc 1315 all-in-one printer has stopped feeding paper. There is no paper jam.

hi there sorry to learn that you are having this issue.
Are you still facing this issue? If you are I will do my best to help you.
Have you upgraded the firmware of your printer lately; you can get the latest firmware in the main support page for your printer
This is the main support page for your printer, GO HERE Go to software and drivers download and select your operating system. You should also upgrade the firmware of the printer.
If you are not experiencing this issue any longer, May you let me know, your time and courtesy,
will be deeply appreciated.
Regards;
RobertoR
remember ==▼
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Hp 1315 all-in-one won't print black

1315 all-in-one prints text in green (instead of black), prints multi colored documents in green and yellow. Both cartridges are new. Prints test page fine. Extended self test:
Vert cart to cart alignment setting: 0 0
Horizontal ...... 0 0
Black Bidirectional Alignment Setting: 0 0 0 0
Color Bidirectional.......... 0 0
Also printer runs a test page each time it is turned on.

Hi,
I think this document might help you with your colors and with the printing a test page each time you turn it on.
Troubleshooting Print Quality Issues
For your colors not matching - follow solutions 1 through 4
Solution 5 and Step 5 on Align the Printer - make sure you follow the steps all the way to the end of this by scanning the alignment page. This should stop the printing of a test page each time you turn it on.
See if this helps...
Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
I am employed by HP

HP 1315 all in one

I am trying to print with my HP 1315 all in one and it tells me the paper tray is empty when it is full of paper. What do I need to do to correct this problem

Hi,
I think this document might help you with your colors and with the printing a test page each time you turn it on.
Troubleshooting Print Quality Issues
For your colors not matching - follow solutions 1 through 4
Solution 5 and Step 5 on Align the Printer - make sure you follow the steps all the way to the end of this by scanning the alignment page. This should stop the printing of a test page each time you turn it on.
See if this helps...
Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
I am employed by HP

My Mac air has version 10.10.2 is not compatible to the scanner drive on the latest Samsung 4 in one series C1860 printer

my Mac air has version 10.10.2 is not compatible to the scanner drive on the latest Samsung 4 in one series C1860 printer, how do I resolve to be compatible ?

Ask Samsung. They make the drivers for their devices.

How to download repair of "missing WIA" for officejet J4550 All in one printer

officejet J4550, all in one
Problem: message states "missing WIA"
I'm missing my installation disk and would like to download the solution to repair/update/install the WIA.
how to download repair of "missing WIA" for officejet J4550 All in one printer

HI knewsomga,
WIA is Windows Image Acquisition, it is a proprietary Microsoft driver model and application programming interface (API) for Microsoft Windows Me and later Windows operating systems that enables graphics software to communicate with imaging hardware such as scanners, digital cameras and Digital Video-equipment. - Source
Please follow the instructions below.
Please hold down the windows flag key and the R to open the Run box.
Type services.msc and press Enter
Locate Windows Image Acquisition (WIA)
Right click and open Properties
Stop the service from the General tab and then Start it again
Verify that the Startup type is set to Automatic rather then manual
Also, look for 'Shell Hardware Detection' in the list of services. If it is not enabled/started, make sure to enable/start the service, and make sure the Startup Type set as Automatically from its properties.
Locate the 'Remote Procedure Call (RPC)' in the list of services. If it is not enabled/started, make sure to enable/start the service, and make sure the Startup Type set as Automatically as well.
If the issue persist, the HP Print and Scan Dr might help, otherwise I suggest contacting Microsoft.
Click here to download and run the utility > HP Print and Scan Doctor
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Looking for an inexpensive all in one HP printer that has an SD card slot. Any suggestions

Looking for an inexpensive all in one HP printer that has an SD card slot. Any suggestions

ChrisPbass,
I would suggest contacting HP Home & Home Office. They will be able to narrow down the field to what would be best for your particular use. There number is below.
1 (888) 999-4747.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Scanner Driver/Sofware for HP 1315 All in One on a Windows 8.1 system

Similar Messages

Maybe you are looking for