Scanner drops connection - device manager says no driver

HP Officejet 6500A Plus (E710n-z) Windows 8 (Sony VAIO): device manager says no driver installed - have downloaded all tools/drivers etc. from HP to no avail - scanner keeps dropping connection even though signal is strong

Do you have this problem with SB 24 or with other SB? And is it retal or OEM? (This is Very important!). Anyway I would suggest trying all PCI slots, removing all PCI items except the card, check the speakers (and speakers conections - it is very easy to make a mistake while conecting speakers), check if you don't have "Digital output only" in advenced options in mixer.

Similar Messages

Mozilla's Web O'(pen) Wonder says video card driver is out of date, but Device Manager says it is up to date.

I have recently upgraded to Firefox 4, and I must say that I love it (:
Although, I want to try out Mozilla's Web O'(pen) Wonder, but it gives me this message :
Unfortunately, while your browser supports WebGL, your video drivers may be too old. To view any of the demos tagged with WebGL, try updating your drivers at NVIDIA, AMD, and Intel.
You can still watch screencasts of the WebGL demos or fully experience our other non-WebGL demos without updating
The problem is that my Device Manager says that my video card is the latest available.
What do I do now?

11 people have this problem now. What video cards supports WebGL?

PCI-6221 fails self-test in MAX but device manager says it's working

Hi everyone,
I bought a few PCI-6221 (37-pin) data acquisition cards and have been able to get one to work but 3 others don't work.
Device Manager sees them and says they work. MAX sees them and when I run Self Test, they fail with error number
-50002. Motherboards in non-working systems are PC Chips M957G and P25G. OS is Windows XP Pro with SP2.
I already tried uninstalling SW and the board, reinstalling SW and the
board...autodetect etc works fine. I even reformatted
the HD on one of the computers and reinstalled the OS. Anyone have any ideas? Thanks in advance. Halden
[email protected]

Thanks Tom for your suggestion to try NI-DAQ 8.0. I just saw it today. Yesterday,
I was able to isolate 3 PCI-6221-37 boards as defective because they all wouldn't work in another computer while
one other identical model card did work in that same computer. I called to arrange to return them to NI and learned
that for these 3, I needed NI-DAQ 8.0. The fourth one was okay
with NI-DAQ 7.5. Apparently, this was a known problem.
I wish NI would have simply notified me that my boards would
not work with the software sent with them and sent the NIDAQ 8.0 CD as soon as they knew rather than have me
waste a day of my engineering time trying to figure it all out. Booo NI.
One of the boards has worked for almost a day under NIDAQ 8.0. I was able to make some progress on the
system I am building. But then it stopped working. LabVIEW
(version 7.0 executable) programs would not open completely
or would open slowly. One that accessed the COM port only (no
data acquisition) did work. MAX opened very slowly or not at all
and when I click on
Devices and Interfaces, the hourglass is up for a long time and finally the + icon goes away indicating that MAX is not
aware of any devices being present. The Windows Device Manager says the board is present and working. Windows
Task Manager lists LabVIEW Runtime and MAX when only MAX is open and indicates that MAX is Not Responding.
I shut down the computer, removed the PCI-6221 board, booted it up again, and MAX is the same way. I uninstalled
MAX and NI-DAQ LabVIEW 7.0 support and then reinstalled them.
Now the MAX loading window is up for more than a minute and NIMAX.exe is listed in Task Manager's processes. After
the first minute, LabVIEW Runtime appears in the Task Manager's
Applications list. After a while longer, the MAX window finally
opens
and MAX is listed in the Applications. I click on the + icon by Devices and Interfaces in MAX and the hourglass appears
and Windows Task Manager says MAX is Not Responding. Eventually, the + icon and the hourglass go away and
the Task Manager lists LabVIEW Runtime and MAX as Running.
I shut the computer off for several minutes, started it up again, and MAX is still takes a long, long time to open.
I haven't put the PCI-6221 card back in because MAX still isn't working.
What do you suggest I do next?
Thanks
Halden

Ipod classic 7 gen, windows 7 32bit won't install usb driver. in device manager, exclaimation mark under other devices, it says no driver loaded.

I have uninstalled any programs that looked starge or might be causing conflict.
uninstalled everythign to do with itunes or apple, rebnooting and diong a fresh install.
my older ipod works fine.
updated intel usb chipset drivers.
i have tried any instructinos i can find online.
I tried updating the "ipod" driver in device manager, I point it to c:\windows\system32
it gives me a starge message saying it can't install the mass storage device, somethign is wrong . . . .

Hi mycaddigo,
Welcome to the Support Communities!
You may have tried some, but not all of the steps outlined below:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Cheers,
- Judy

Ati Radeon HD 6370M code 43 in device manager after installing driver - can't get GPU to work

Hello
I have bought a second hand HP laptop recently and I am having hard time installing GPU drivers and getting it to work at all.. so here is my story:
I was told that the product I bought is a HP Pavillion DV7-4142eo. I have removed the battery and checked the labels under it - and indeed the manufacturers labeled it as a DV7 4142eo laptop.
HOWEVER - and now comes the fun part - the product number in the bios (XZ288UAR#ABA) belongs to the HP Pavilion dv7-4263cl. This is also true according to hp automatic product detection app.
I used the system information tool on windows 7 and pcidatabase.com to determine the models of the graphic cards in my laptop. It turns out it has an ATI Mobility Radeon HD 4250 and an Ati Radeon HD 6370M gpu.
First I tried to install the ATI Mobility Radeon HD 5650 Graphics driver, because this gpu belongs to the DV7-4142eo laptop. It didnt work, in the windows 7 device manager I got two times "standard vga graphic adapter" showing.
Next I tried tried autodetection and used amddriverdownloader. This tool recomended installing the following driver: 13-9-legacy-vista_win7_64_dd_ccc_whql.exe . After installing this driver the integrated graphic card ( ATI Mobility Radeon HD 4250) works perfectly but I the other one - the more powerful one, the Ati Radeon HD 6370M - doesn't work. In the device manager it is labeled as "standard vga graphic adapter". Installing its own driver doesn't work as it results in the problem stated in the Subject.
What do you suggest me to do? Do you think code 43 means that my laptop's GPU is broken? Please help.
Thank you

Hi:
I would go with the product code...and say it is a HP Pavilion dv7-4263cl Entertainment Notebook PC.
Accordingly, this would be the only AMD graphics driver you can use.
Uninstall all previous graphics drivers and reboot before attempting to install this one.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-89582-1&cc=us&dlc=en&lc=en&...

Lack of sound after Window 7 (64) installation into iMac OX 10.6.7. Tried to install driver from Snow Lepard disc (Cirrus 64).Wizard installed driver. No sound, Device Manager indicated that "driver is not installed" but also that the"device is working"

I don't know how to proceed. I didn't have sound after installing Windows 7 inot iMac OX 10.6.7 (64bit) After unsuccessful attempt to upgrade the driver from the BootCamp file, I deleted the driver from the Sound and Game controlled hoping that I would allow me to automatically install the correct driver from Boot camp.
Now the Sound Video Game controller disappeared from the Device Manager
How can I find out which is the correct sound driver for my computer (The Speaker Properties only say:WIndows)?
How can I install it without seing the Sound and Game controller in the Device Manager?

When you say "manually download", you mean from the BootCamp File on Snow Leopard, or from the Internet.
My additional problem is that the "Sound and Video Game Controller" disappeared from the Device Manager when I removed the previous driver. I don't find the place where I can reistall the new driver.

Windows Device Manager shows several driver problems

I have the latest EFI Firmware update and Boot Camp 1.1.1. Windows XP Pro SP2 shows problems in the Device Manager.
(1) What's the USB Human Interface problem? I have no funny USB devices connected.
(2) What's with the yellow question mark at Base System Device?
(3) I have four PCI Express ports flagged with problems.
I'm guessing that the Boot Camp Driver CD has omitted to provide for these devices. I am surmising that many others who have the Mac Pro also see these problems.
Is there any way of dealing with these and fixing the problems? Like, can I download the required drivers from Intel? I have already downloaded and installed INF Update Utility [INFINST_AUTO.EXE] version 2.11.15.0. This was no help in resolving the problem.

I too have had issue with Bluetooth keyboard, specifically the Apple keyboard. It seems to be running ok at the moment but it took me a while for it to pair properly. I still have no idea as to what I did differently that made it work. I think it was pairing them without a code.
Fortunately for me I use Parallels mostly as it's far more convenient so I'm not too bothered about Boot Camp driver support at this moment. When it comes time to play some games though that'll probably change.
The thing with Boot Camp is to be a little patient. Yes we'd like Apple to have sorted everything out a month ago although the software is still in beta form and does not need to be finalised until the realese of Leopard. Hopefully they will get things together sooner rather than later given the clock is ticking.

G60-324CA throwing mutlipe Code 12's in Device Manager, No Sound, Driver Install Fails!

I have an HP G60-324CA. After reinstalling Windows 7 - which had previously worked with all the trimmings - I reinstalled most of the drivers. The sound driver (for a Connexant 221 SmartAudio) does not install and states that it 'Driver Installation Failed:Could not find the MEDIA device for this driver.'.
A glance at the device manager shows that a few devices are not working, all giving the error 'This device cannot find enough free resources that it can use. (Code 12)' including one of the SATA controllers and the HD Audio Controller which I am assuming is the connexant device or something it depends on.
In attempt to adress the problem the latest BIOS was installed, nothing changed.
Any assistance in resolving this problem would be much appreciated.

Hi,
Make sure you have installed the Chipset driver for your version of Windows 7.
Chipset Driver Windows 7 32bit
Chipset Driver Windows 7 64bit
Restart the notebook after the installation and then see if you can now install the other drivers successfully.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Error Code 10 (Device manager) NI-CAN driver 2.5.2

Hi,
I am using the PCMCIA-CAN/2 series 2 card to communicate with an Aerovironment ABC150 charger and get the Error Code 10 in the device manager when I tried to install the driver.
Windows XP
Dell Latitude D520
Driver version 2.5.2
Previously the system had worked fine until we installed a USB 3G GSM modem. The Max software no longer recognised the CAN card. Since, I have installed the 2.5.2 version of the software and reinstalled XP on the machine. I have checked for IRQ conflicts and eventually removed the USB GSM software and hardware. After reinstalling XP, I tried to install the driver without installing the USB modem. I have downloaded the patch as for 2.3 versions and before.
When installing the driver from the 'Found new hardware wizard' I was not able to point at the system32/drivers location for the nicanpkw.sys file as it reported that there was no compatible software, nor by looking at any of the other locations. Instead I had to manually select it form the list of available drivers.
It is possible the Dell has been damaged as the original PCMCIA GSM card stopped working after the machine was knocked. I have tried other PCMCIA GSM cards and they work fine. I have also tried to use the PCMCIA-CAN2 (s2) card in another machine and that works also.
Thanks in advance,
Cam
nicanErr.txt
[OSINFO_SECTION]
OS=Microsoft Windows XP Workstation
Service_Pack=Service Pack 1 (Build 2600)
[DRIVER_VERSION_SECTION]
NICAN.DLL_VERSION=2.5.0f6
NICANFRM.DLL_VERSION=2.5.0f6
DRIVERS\NICANPK.DLL_VERSION=2.5.1f0
NICANPU.DLL_VERSION=2.5.0f6
NICANTSK.DLL_VERSION=2.5.0f6
NICANCFQ.DLL_VERSION=2.5.0f0
NCVI.DLL_VERSION=2.5.1.12289
NICAN_S1.NFW_VERSION=2050100
NICAN_S2.NFW_VERSION=2050100
[CURRENT_SECTION]
Section_Index=0
[INDEX_0]
Local_Time=
Err_Status=
Function=

Hi,
I have seen such wiered things when i had the legacy USB support enabled on a DELL notebook. Try to find this property in your BIOS and disable it and besides check wether or not your BIOS has a configuration property for PCMCIA/cardbus and try to enable pcmcia support (16 bit). Thats because the CAN board needs his own IRQ and cannot share interrupts like other cardbus compatible devices can.
Let us know if that helps.
DirkW

Device manager says that the iPod driver cannot be found

Hey all,
Recently my computer wasn't recognizing my ipod nano 6th generation. When I looked into the driver issue, I saw the following image. It looks like the Apple Mobile Device driver is working fine, but iPod driver under "other devices" is not working. When I click to manually update the driver, the computer tells me that windows cannot find a driver that supports the device. Any help would be appreciated.

Hello, egiles87.
Thank you for visiting Apple Support Communities.
If your device is not recognized by iTunes, I would recommend the steps in the article below. Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > Windows Vista, Windows 7, and Windows 8 > If the Apple Mobile Device USB Driver is not listed > Step 5 > If only Apple iPhone, Apple iPad, or Apple iPod appears.
iPhone, iPad, or iPod touch not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H.

The properties in Device Manager says my vid. card is PCI!!!

Of course it's AGP, why does it show up as PCI?

I take it that it will say "PCI-bus 1, apparatus 0, function 0", or something alike ... It is supposed to be that way )
Hans

T540p connect device

hello
I found the following error on my laptop T540p:"lenovo Connect Device 1.0 Missing"where I find the driver ????thank you

Hi, I have the same problem as others peoples. The device manager say, in yellow, DEVICES : one or more devices have problems : Lenovo connect device 1.0 is not installed. This problem appears from the beginning (january 2015) Where can I find this driver or how to manage this issue ? Best regardsPaulo540

IOS device not recognized in iTunes, Windows 7 Computer, or Device Manager

Sometime last week, I ran the updates for my computer. When I plugged in my iPod Touch afterwards, it would not connect to iTunes, although on the iPod itself, I could see it was connected based on the "charging" symbol on the battery icon. So I checked if my computer recognized it as a "Device with removable memory in the computer. Only "DVD RW Drive (E)" showed up and under the "Other" section only showed my iCloud Photos folder. I also checked the device manager for any drive with the name Apple- none. I have only 2 USB ports on my computer, and I've switched between them over and over. No result. I have checked the hardware id's on all my USB drives in the device manager, and I only find the HP TrueVision camera on my laptop.
After a couple of hours browsing through the support forums, I was able to restore the driver, thus allowing my iPod to be recognized again by the computer and iTunes.
on 10/14/13 I ran the installation for updates again, and the same problem occured with my iPod. So I went through the same steps from last week, but this time, no changes. I still cant get the drive back on my device manager. I've gone through all the support pages pertaining to anything and everything about this issue, and still, everything I tried from and simple computer restore to a clean boot has still rendered no results. I know my USB cable works because im able to charge my iPod from any outlet (computer, A/C adapter, car adapter) and sadly I do not have the means to try on another computer.
I have a HP 64-bit Computer running Windows 7 service pack 1.
iTunes version 11.1 currently installed.
iPod Touch 4th Generation iOS version 6.1.3.
The Apple Mobile Device Support is installed.
Can someone heplp me?

Have you tried to give your iPod a reset? Hold down the sleep and home keys until you see the silver apple. Let it reboot and try again.
Have you tried different USB ports? Rebooted your computer?
Uninstalled and then reinstalled iTunes? (You won't lose content if you uninstall)

Device Manager error

I have a MS-7582 motherboard and I'm getting a device error with this location.
PCI bus 5, device 0, function 0
Device manager says....
The drivers for this device are not installed. (Code 28)
There is no driver selected for the device information set or element.
I have no idea what this is or what driver I should be looking for.
Anyone have any idea?

Added signature.... guess I'll see if it worked with this post.
Badboy. I've been to that download page before I just wasn't sure it was the one listed as lan driver.
Anyway. I downloaded that one and in the process of installing discovered it may still not be the driver I need.
By that I mean the problem one is not listed under my "Network drivers" its the next tab down under the "other drivers" tab.
Its listed as a PCI Device with a location of PCI bus 5, device 0, function 0
And this is the status.
The drivers for this device are not installed. (Code 28)
There is no driver selected for the device information set or element.

*SOLVED* Device not detected/ No driver installed for X-FI Fatal

OK!!!! the only reason I signed up here was to post that I have (for me) solved my problem.
Before I get into details this occurred on a fresh system with latest drivers for hardware used.
The problem was installing my X-Fi card on my 680i m/b (striker extreme).. when I would install the driver it would simply crash the computer and when it started up the hardware was not detected to used the software and the device manager said no driver installed.. I tried everything.. I installed the driver in safe mode (yay it worked without crashing) then I booted for windows only to have it blue screen for a second and restart... repeating the cycle.. so i reinstalled windows again... I tried installing the driver different ways in windows.. nothing worked... I gave up...
BUT!!!
today while i was at work I decided I would try one last thing.
this is what got it going. I have SLI 8800ultras that covered the PCI slot on the bottom of my board and I though I would try the card in this slot to see if it worked there... so I disabled SLI took out my bottom card put in the sound card in the bottom slot, installed the driver... It installed 00% no crash... even better it worked after the restart!!!... so then I had to test if it worked in the top slot so I powered down, moved it up to my top PCI slot and windows auto set the driver for it (as it was already installed) It worked in the top slot now... Finally I put in the second 8800 to make sure it worked with this slot in use... It still worked fine with SLI enabled. because I was unhappy with the mess I made installing drivers all the time as I did with the many crashes I decided to do a fresh install of windows making this card work from the start so here is what you need to do if you have a 680i board with SLI. this is exactly what i did with my fresh install.
install only one GPU card..
Put the X-FI in a different slot that isn't giving you problems
Install windows
Install service pack 2
install your chipset drivers
install sound card drivers
power down, change sound card to permanent slot
test - power down
put in the second GPU card
install GPU drivers
Good luck you all having this problem.. I hope my solution helps you.
Bryan

I think I?got a similar?problem earlier today when I was messing around with?onboard audio?that I later removed and after unplugging a?USB headset.
Have you checked the device manager, is there any higlighted hardware that has a exclamation mark next to it.
I fixed the issue by simply uninstalling the WDM device with the exclamation mark and restarted.

Scanner drops connection - device manager says no driver

Similar Messages

Maybe you are looking for