Scanner missing in Import of PS CS5?

Hi again,
I just stumbled over another problem in PS CS5
I have a Canon Lide60 Scanner and in all previous Versions of PS it was just there in the Import-Menu, without any action from my side.
In CS5 however, it is suddendly missing.
I tried re-installing the Scanner-Driver, but there is still no entry in Photoshop?
Any ideas what's wrong here and how to integrate it again ??
(Vista, 32 Bit)
Thanks!
bw

Adobe made their "stupid" decision because the Twain plug was causing problems and they couldn't support it universally under those circumstances.
From the download page:
TWAIN - The TWAIN scanner plug-in is no longer installed with Photoshop CS5, but is available via web download. Supported on 32-bit Windows, 32-bit Mac OS, and 64-bit Mac OS with scanners that support 64-bit scanner drivers.

Similar Messages

PS CS5 not seeing scanner in File Import

I've upgraded from CS3 to CS5 and PS doesn't see my scanner in File > Import.
I looked in the CS3 PS Import/Export folder and see a TWAIN.plugin, but don't see one in the CS5 PS Import-Export folder.
Should I copy the TWAIN.plugin into the CS5 folder? Or is interacting with scanners handled differently in CS5 vs CS3?
The scanner is a Canon LIDE 600F, and if I launch CS3 I can scan no problem.
Thx,
Steven

You'll need the TWAIN plug-in for CS5 (moving the old one from CS3 or CS4 is NOT a good idea)
http://kb2.adobe.com/cps/828/cpsid_82824.html
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4687
After you install the TWAIN Plug-in, you will likely need to run Photoshop in 32bit mode because most scanners have 32bit TWAIN drivers.

How can I use the Epson scanner Perfection V600 Photo in Photoshop cs5.1

How can I use the Epson scanner Perfection V600 Photo in Photoshop cs5.1
I am not able to see the scanner in photoshop.

Are you using a mac or windows? And what version?

All clips missing after import from camcorder!

All clips are missing after import from camcorder - Canon ZR20. For some tapes all clips are there, for others there are none. All the files are there in the finder, but I don't know how to have them show up in Final Cut Pro X.
Any suggestions?

Ok - this is frustrating. I have been importing my old miniDV tapes again into FCPX as I wasn't able to transfer all of these projects from iMovie - don't get me started... After importing about 7 of the tapes the first 3 came in fine, but the last 4 didn't have any clips as I said in my original posting. Now after restarting FCPX a couple of times all of a sudden the clips are all coming in! Strange! Guess I'm OK now.

Download Presenter trial in your website but when I published object scorm in zip file miss some important file such as ismmanifest.xml. In fact Moodle upload is wrong! Is it a bug or what? Thank you.

Download Presenter trial in your website but when I published object scorm in zip file miss some important file such as ismmanifest.xml. In fact Moodle upload is wrong! Is it a bug or what? Thank you.

You can publish Adobe Presenter Projects to your Moodle LMS (this will work for many other LMS’ too.)Please follow the steps as mentioned in the blog linked below.
https://blogs.adobe.com/presenter/2013/08/step-by-step-how-do-i-publish-my-presenter-cours e-to-my-learning-management-system.html#more-6260
Regards,
Rajeev.

My itunes is not downloading correctly even after i uninstalled all software of apple keeps saying the registry is missing to import and burn cds??? it is not on a mac computer

my itunes is not downloading correctly even after i uninstalled all software of apple keeps saying the registry is missing to import and burn cds??? it is not on a mac computer

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

Raw files missing in import direct from canon eos 350D

Hi,
I realise that files missing for import is fairly common, but I still haven't been able to find a reason. I can load jpg and cr2 from a folder no problem, but when I attach the camera, using the latest canon WIA driver on windows xp, the window that comes up shows only the jpgs on my camera. I realise that a workaround is to get the files on the pc and import from there, but I don't have my canon software anymore to do that, and besides, I'm using the trial version to decide whether or not to buy. Is this a LR problem? a canon one? and is there a fix in the pipeline?
Apart from that, really like the product.
Many thanks
Dave

Dave
There was a problem with version 1.0 about importing JPG's and RAW's because although they have a different suffix i.e. JPG or CR2 they have the same file name. LR, as primarily a RAW converter sees these as one and the same file and only imported the RAW file. The work round for this was to rename the JPG's slightly outside of LR using a name that you could yourself identify with the original RAW e.g. RAW 0000001.crs with the JPG being renamed to 0000001A.JPG followed by Importing. I had thought they had cured this with the update but as I don't shoot JPG + RAW haven't tried this for myself. What's strange about your post though, is that if memory serves me correctly the problem lay not in the Importing of the RAW file but in the JPG file as described above. Perhaps someone with more up to date knowledge of this will jump in here.
The importing directly from the camera I referred to earlier was a known problem with Canon cameras - perhaps something to do with the folder structure although I couldn't swear to it. Hence the reference to using a Card Reader. In any event downloading from a Card Reader is faster as I'm sure you know.
If you right click and explore the Card you'll find that not all of the files are empty. The top folder will be something like DCM and by double clicking on this top folder it will open up the others.

Why can't i login with the account i just created???? I am missing an important session!!!!

why can't i login with the account i just created???? I am missing an important session!!!!

Hello ljp1,
What browser are you using to log in to your brother account? It could be a problem with some settings within your browser that is giving you grief.
Try going through these troubleshooting steps to see if it helps resolve the issue.
http://goo.gl/TTH2s
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

How can I show my scanner in Photoshop import menu?

How can I show my scanner in Photoshop import menu?

Does it not appear when you go to Import > Images from Device? Please provide answers to the questions listed here: "FAQ: What information should I provide when asking a question on this forum?"

Importing 1920x1080 in cs5.5

I am using panasonic HC-V500 and shot in 1920x1080 also listed as 1080p/50 AVCHD. When I import into Adobe cs5.5 to edit in workspace it plays super slowly on visuals/ is very laggy with audio staying at normal rate- so it's imposisble to view or edit. I can only assume I'm using the wrong project and sequence settings as it's working totally fine in windows movie maker!! Advie would be greatly appreciated. I only need the footage to make a youtube vid so I assume I just shoot in 1080i/25 next time?!
Thanks

What are your HARDWARE specifications?
More information needed for someone to help... click these links and provide the
requested information
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679
-http://forums.adobe.com/thread/419406
Also, See 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666
-and a FAQ on sequence setting http://forums.adobe.com/message/3804341

Top half of video is missing on imported WMV files. Running CS3 & Win XP Professional

Top half of video is missing on imported .WMV files. I'm running CS3 Adobe Premier Pro with Win XP Professional OS
Hi all,
I just installed my Adobe Premier Pro CS3 for the very first time. I then IMPORTED a WMV file into the Project Frame and then Dragged & Dropped it into the Time Line. All the windows (or Frames) Project Frame, Source Frame and the mini-Project Frame show this video with the top half missing. I’m running Win XP Professional with the latest Service Packs installed.
Please Help.
Thanks
Derek

After Searching the net for a while here, I found a solution to the "Half Screen" problem!
The half screen video problems seen while trying to play WMV files in my CS3 Adobe Premiere Pro program seems to have been due to a recent Windows software Security update made to it’s Windows Media Player programming. As soon as I removed that update, my WMV files now show normally within Adobe Premier Pro.
If you wish to uninstall this Windows Patch / Security Update on Win XP Machines:
No#1 Prior to removing/un-installing the file, shut off "Windows Automatic Updates" and set update preferences to manual. Thus in the future you can select which Updates you want to instal (and which one not to instal) *remember to ignore the KB2834904 update in the future! That is at least until Widows fixes this Security Update / Patch.
A) Go to "Add/Remove Programs" in Control Panel
B) In the Add/Remove Programs, check the "Show Updates" box located at the top of that window
C) Scroll down to "Windows XP Software Updates" and within that section, scroll down to "Security Update for Windows Media Player" KB2834904 (mine was dated 7-10-2013)
D) Click on the REMOVE button and re-start your system.
If using Win 7 Operating System: to remove this Patch / Security Update the file to remove is: KB2803821 - In Windows 7, go to "Add/Remove Programs" in Control Panel, click on the "View installed updates" link in the left sidebar, search for KB 2803821 and click REMOVE.
Good luck everyone!
Derek

After a UPSA connection edit, all my user profiles are "missing from import"

Hi there,
I've got a problem with my User Profile Service Application. I edited my existing connection to add some new OU containers to the list, after the networks team had done some
restructuring to reflect an organizational change. Then I ran a Full Synchronization. But now all of my user profiles show up under the "Missing from Import" list. I still have 943 profiles in SharePoint, and not surprisingly, people search isn't
working. I suspect that I did something wrong in the process of selecting the Users OU containers in the AD tree (in Populate Containers), but I cannot see what, since I replicated the selections that had been made for an unchanged department, to
the ones that had been reorganized.
Any help appreciated.
Tom
SharePoint Systems Officer, Capital Regional District, BC, Canada

Hi Tom ,
According to your description, my understanding is that all the user profiles are showing up under "Profiles missing from import" list after you edited the existing User Profile Synchronization
Connection.
For your issue, it can be caused by that your User Profile Synchronization Connection is unable to connect to your AD. Please make sure the account used to connect to Active Directory to import
profiles has access to the Organizational Unit you are importing from. By default this account is the Default Content Access account. And the Default Content Access account must be a domain user account and it must have read access to external or secure
content sources that you want to crawl by using this account.
Then you need to check if the “Profile Synchronization” job status is “succeed”.
Also please check the “Sync filter” for the service, and make sure the account are not include in the Exclusion Filter for Users.
For a workaround, you can just delete the existing connection , recreate it and perform a full synchronization.
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support

Error when importing file into CS5

When I tried to import an Illustrator CS5 file into Flash CS5, I got an error from Windows saying that the program "stopped working" and it was searching for solutions to the problem. When it found no solutions, it said that it had to close the program. I've tried three times now and the same thing keeps happening. Has anyone else encountered this and, if so, do you know how to fix it? Please let me know. Thanks!
*Pooja*

Hi there,
I can reproduce the crash. It's seems to be related to Importing all layers to Stage, and selecting the "Place objects at original position" option. All other combinations seem to not crash, so at least it helps isolate what's happening and provides an option for you to import your artwork and continue with your site. I will file a bug and send this to the correct folks for evaluation - I'm not too sure what the conflict is between the AI file and Flash (it's not due to not having AI installed).
Thanks for posting it!

Importing,photos,from,a,scanner.,,when,I,import,from,my,epson,exp-860,scanner,and,go,to,de velop,in,lightproof,,only,photos,imported,as,JPEG,have,a,active,,WEB,adjustment.,,tiff,and ,JPEG,have,a,grayed,out,WEB,Adjustment. Is this normal?

Importing,photos,from,a,scanner.,,when,I,import,from,my,epson,exp-860,scanner,and,go,to,de velop,in,lightproof,,only,photos,imported,as,JPEG,have,a,active,,WEB,adjustment.,,tiff,and ,JPEG,have,a,grayed,out,WEB,Adjustment. Is this normal?

William Lloyd wrote:
Yeah you shouldn't use ~ in general. That is a shortcut for "Your home directory."
This is not strictly true. ~ is a "meta-character" in Unix shells -- it is an instruction to the shell to substitute the path to a home directory. It only has meaning in a Unix shell command, and only if ~ is the first character in a file path name. Outside of a Unix shell ~ has no special significance (although other programs might adopt a similar convention).
I don't see any reason why Aperture would be doing tilde expansion, and if it is, it is doing it wrong. "March~May Asia Trip" is a perfectly legitimate name in both Mac OS and in Unix. There is nothing taboo about using ~ in a file name. This behavior (which I can confirm) is almost certainly an Aperture bug.

How Do I Remove Scanner from the Import Menu

The printer has already been uninstalled from the computer and I do not see it listed in the Device Manager. Is there a configuration file somewere in the Photoshop application or program folders that I can edit to remove an old non-existent scanner from the import list?
Thank you

amm09 wrote:
Unfortunately that removed all of the scanners and not just the old one. Is there any way to isolate the old scanner and remove it without removing my current scanner?
Oh, I didn't realise you had several. There is a PSP in the preferences settings folder called Menu Customization which contains scanner names it but I would not recommend messing with it!
My recommendation in such circumstances is to bypass PS and use the scanners own software or the Vuescan standalone program.

Scanner missing in Import of PS CS5?

Similar Messages

Maybe you are looking for