Scanner not recognized in PS CS5

New install of  PS CS5.  My scanner (HP 8300 Scanjet) is not recognized.  Still have CS4 installed and it is recognized O.K. there.  Any body know why CS5 won't recognize it?

I have CS5 and both 64-bit and 32-bit versions installed. In the 64-bit version I can access my CanoScan 8800F through the Via interface, which offers a very rudimentary functionality. For instance, when scanning four slides, instead of four images of one slide each, I get a single image of the slide holder with four slides in it. When I downloaded the Twain plugin from Adobe, I could use the full functionality of the scanner, but only in the 32-bit version of CS5 because the Twain plugin does not run in 64-bit mode.
Best regards,
Antero

Similar Messages

  • Scanner not recognized in PS CS5 even after downloading twain plug-in

    Am trying to get my Epson scanner (Perfection 3200 pro) to show up in the imports submenu. Have downloaded the CS5 TWAIN plug-in, and changed PS to start up in 32 bit. Scanner has current driver. What am I doing wrong?
    Thanks for any help!

    Bye bye Epson.  A V300 photo scanner is NOT old but that response from their tech dept sounds all too typical.
    I've had more trouble with the 2 Epson products I bought than with any other brand.  The v300 failed after 2 months and took weeks to be repaired.  My first R800 was doa.  By way of contrast, Canon devices perform superbly and their support is first rate.
    Epson have a lousy telephone customer support system (operating out of Bombay I think) and an appalling online support (not that Adobe is much better).  And Adobe are far from guiltless.  ealier versions of Photoshop did recognise scanners for importing images and Adobe should have kept faith with the very many users who have used this facility with earlier versions of photoshop.  I hate it when two manufactures pass the buck back and forth like this.

  • Officejet 150 mobile scanner not recognized

    Win 8.1 desktop connected by usb to officejet 150 mobile printer/scanner
    Installed using latest driver install package from HP.  Install completes with no errors.  Printer works normally
    HP scan fails.  Gives error box saying scanner not recognized -  attempted uninstall and reinstall
    Used utility from HP to do complete removal did not fix.  Ran HP diagnostic which says driver not recognizing scanner and to contact support.
    Need help

    Hi @lutzro 
    I understand you are having problems scanning despite the troubleshooting your best efforts. I'm sorry to hear that, but will certainly do all I can to help out
    Although you have already uninstalled and reinstalled, I suggest trying a more comprehensive uninstall. Please complete the following steps and let me know the outcome;
    Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
    Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
    Download the software and choose to save as, save to desktop > OJ150ML511_Full_14_en.exe
    After the software downloads and extracts, open the temp folder again, use the instructions from step 1.
    Look for, and open the folder starting with 7z (Example: 7zS2356)
    Open folder Util
    Open folder CCC
    If you have an HP computer run the L3uninstall.exe. If you have anon-HP computer run the L4uninstall.exe
    When the uninstall has completed restart the computer
    Follow these steps to reset the registry settings and options for Windows Installer.
    Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
    In the Open box, type msiexec /unregister, and then click OK.
    Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
    In the Open box, type msiexec /regserver, and then click OK
     *Note: there is a space between the c and the /
    If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
    Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
    Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayer/downloads.html
    Restart the computer
    Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box
    Download and run the HP Printer Install Wizard for Windows
    Type services.msc and press Enter
    Locate Print Spooler and double click on it to open the Spooler properites 
    Make sure startup type is set to Automatic, if it is not please click on the drop down and choose Automatic
    Under Service status, please Stop the server, and then wait a moment and click Start
    Deleting the printer from Printer Server Properties
    1. Open the ‘Devices and Printers’ folder
    2. Choose ‘Print server properties’.
     Win XP – With no printer selected, click ‘File’ then ‘Server Properties’.
    Windows Vista – With no printer selected, press ‘Alt’ then click ‘File’ then ‘Server Properties’.
    Windows 7/8 and 8.1 – Select any printer in the ‘Devices and Printers’ folder and click ‘Print Server properties’ above.
     3. Click on the ‘Drivers’ tab at the top of ‘Print server properties’ window
    4. Choose the printer you want to uninstall and click ‘Remove’
    5. Choose 'Remove driver only'
    6. The next screen will give a warning, letting you know that deleting the driver package will remove it from the system. Click ‘Yes’ to say that you are sure you want to do this.
    Download and run the HP Printer Install Wizard for Windows
    The HP Printer Install Wizard for Window was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer.
    Keep me posted, I look forward to hearing from you.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Scanner not recognized by Photoshop

    Hi there,
    I bought a new iMac G5 four days ago only to find Photoshop CS5 was not recognizing the scanner on my two year old Samsung SCX 4500 Printer/Scanner (the printer works fine). I downloaded the most recent Samsung scanner driver (1.0) and Photoshop still doesn't recognize it. Both Preview and Image Capture recognize the scanner which enables me to scan and then upload to Photoshop, but that adds a step I'd rather avoid. Unfortunately it seems that a lot of people are losing printer/scanner compatibility when they upgrade.
    Any thoughts on a fix?
    thanks
    dg

    all the components for the mac can be found here:
    http://www.ellert.se/twain-sane/
    you want to first download libusb as a binary for 10.6
    http://www.ellert.se/PKGS/libusb-2009-09-10/10.6/libusb.pkg.tar.gz
    and then install it
    then download SANE backends as a binary for 10.6
    http://www.ellert.se/PKGS/sane-backends-2010-01-17/10.6/sane-backends.pkg.tar.gz
    then install
    then download TWAIN SANE Interface as a binary for 10.6 and install
    http://www.ellert.se/PKGS/TWAIN-SANE-Interface-2.9/10.6/TWAIN-SANE-Interface.pkg .tar.gz
    reboot, open photoshop,
    you should now have a "sane.." listed as an option as you would your old scanner.

  • Why are my plug-ins not recognized by Photoshop CS5?

    Hello,
    It seems my plug-ins are not recognized at all by Photoshop CS5:
    - Imagenomic
    - Photokit Sharpener
    - Photomatix
    and even the - Optional Plug-ins given by Adobe are not working
    I get a panel that says:
    "could not complete your request because Photoshop doesn't recognize this type of file"
    Am I doing something wrong?
    The plug-ins are in:
    Applications>Adobe Photoshop CS5>Plug-ins>Automate>PK Sharpener
    or
    Applications>Adobe Photoshop CS5>Plug-ins>Optional Plug-Ins
    or
    Applications>Adobe Photoshop CS5>Plug-ins>Imagenomic
    or
    Applications>Adobe Photoshop CS5>Plug-ins>Filters>Tone Mapping
    Thanks for your help!
    Emilie

    sorry I've found the answer... not running in 32 bits... What a shame...

  • Mac DVD Superdrive not recognized in Encore CS5

    I'm trying to burn a DVD using Encore CS5 on my new Mac Pro.  I already spoke with Apple to troubleshoot to see if it was the drive.  It was not the drive.  Therefore, there is a problem with Encore not recognizing the drive.  In the destination window in Encore, where it says "Recorder" in the build tab, it says "None Found".  Anyone know what the problem is?

    Well, in the WINDOWS world some software will cause Encore to not be able to "see" a drive, so read the links below... I don't know if the same kind of thing happens in the MAC world
    Things and Software to AVOID when authoring/burning a DVD
    Start --> http://forums.adobe.com/thread/608660?tstart=0
    #2 here has WHY Explained http://forums.adobe.com/thread/607390
    Plus http://forums.adobe.com/thread/562941?tstart=0
    Again in the Windows world, if the user can't or won't remove the offending software for some reason, the solution is to have Encore build the project to hard disk (folder or create an ISO) and then use 3rd party software to burn the folder or ISO to DVD
    Added
    In fact, just go ahead and tell Encore to write the project to your hard drive and then use other software to write that output to a DVD... if that works, you know that "something" is getting in the way of Encore being able to communicate with your drive

  • HP Photosmart scanner not recognized with IMAC OSX 10.9.3

    after updating to Maverick osx 10.9.3 my hp photosmart scanner is not recognized with IMAC image capture. I have done all software upgrades and deleted the printer and reinstalled the printer which is on my wireless network.

    Do these HP docs help?
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03967522&cc=us&dlc=en&lc=en
    http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/Have-updated-to-maverick- no-drivers-for-printer-or-scanner/td-p/3061957
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03967500&cc=us&dlc=en&lc=en

  • Flat bed scanner not recognized

    I connected a ColorPage-Vivid 1200X scanner to see if my Mac would recognize it. Apparently, it knows that it is connected since I get in the device tree,
    1200DPI USB Scanner:
      Product ID:          0x201d
      Vendor ID:          0x0458  (KYE Systems Corp.)
      Version:           5.07
      Speed:          Up to 12 Mb/sec
      Location ID:          0x06200000 / 4
      Current Available (mA):          500
      Current Required (mA):          100,
    connected to a USB port. Now when I run the Image capture app, it says that there are no scanners connected. Thought that driver s/w might be missing, so I went to the TWAIN SANE Interface for MacOS X and installed the corresponding packages (front end and backend), but still the scanner is not recognized. Any ideas to solve this problem are welcome. Thanks.

    melstrom:
    Sorry for taking so long in responding to this problem. I was able to solve the problem with my Genius ColorPage-Vivid 1200X scanner. If you wish you can try what I did. Be aware that my scanner is not a network scanner (as yours is). It is connected to a usb port. Briefly, these are the steps that I followed to have scanning capability in my Mac.
    Install the TWAIN Sane interface for Mac OS-X. I followed all the instructions as explained at the website: http://www.ellert.se/twain-sane/, including the package that allows you to modify the SANE preference file using a GUI. A SANE icon will appear in System Preferences.
    Go to System Preferences and double click Sane (for this you may need to administrator privileges). Check in the screen that appears, if your scanner brand or driver shows in the list. Check the configure button for your scanner, which will let you access to the configuration file. Look in the list until you find the specific model of your scanner. Delete the comment character (#) of all the lines associated to your scanner and click OK. Close the Sane screen.
    Get the firmware file of your scanner. It should be located on the scanner installation disk.
    Copy the firmware file above to the following directory:
    /usr/local/share/sane/brand/ (This directory will probably need to be created. For that, you use Terminal with root privileges),
    where brand is the driver name that you found in step (2) above.
    Try the scanner with a scanner app like Image Capture or VueScan.
    Good luck!
    wp

  • Brother MFC 7360N scanner not recognized after 1 year Windows 7 64 bit

    Past month scanner is not recognized but can print and fax uninstalled all software and reinstall from Brothers website multiple times including their uninstall tool did firmware updates and control center update changed ports on the router switch and
    ran a new cat5e cable Still cannot detect scanner on the network brothers says it's a Microsoft problem Any suggestions

    Hi,
    How is the current situation? Did you try the suggestion provided by AboveInfranet?
    Also try to remove Scanner and its drivers, then reinstall it for test.
    Karen Hu
    TechNet Community Support

  • HP scanner not recognized by MacBook Pro 17" 2010

    New Macbook Pro user (arrived from the factory last week) with OSX 10.6.8. Trying to get my HP scanjet 7400C to work. It's certainly not being recognized. When I look up how to install a scanner in the help it dumps me to the print and fax dialog. No indication in this dialog how to set up or use a scanner. No scan tab. No scanner options at all that I can see.
    How do I install a scanner?

    Hello Jeff,
    I have the same problem trying to connect an HP 7400C Scanner to my MacBook Pro 17" (2011) running Snow Leopard.  I tried downloading the drivers from HP Support Drivers (http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw _lang=&product=59553#N160).  The web page indicates that it supports OS 10.3, but does not identify any later version of OSX that is supported.  When I download that package, it is not recognized as an installable image.
    I am wondering what drivers and support software you downloaded and installed?
    Thanks for your help!

  • Bridge Rotations not Recognized in Photoshop CS5

    So i've rotated the images in Bridge...and according to Bridge's metadata the files are being rotated...but when I open them in Photoshop they aren't rotated. Seems as though photoshop isn't recognizing the EXIF data. I'm running it on an iMac and they are both CS5.1. So yeah...if anybody has any suggestions that would be amazing. Thanks!

    Worse that being screwed, is not knowing what is wrong so you can't fix it without guessing any maybe not guessing right.  Use a new CF card use a card-reader and maybe the situation won't happen, again, is the best you can do going forward.
    As far as what to do for the photos from this set, if the card has not been reused completely, again, then you can try recovering the photos off the card, to see if any photos from the batch that doesn't work, remain, and see if they copy off any better the second time.  If they do copy off ok, then there is likely something wrong with the transfer process and less likely that it is the CF card.
    The software I've used when I've accidentally deleted photos off the card when I shouldn't have, is PhotoRescue from www.DataRescue.com  I have one of the older versions so I'm not sure what it corresponds to with the newer set.  It costs money, but you can run a scan of the card, first, to see if it finds thumbnails of the images it is going to recover, but you have to pay before you can actually save off the photos it has found.
    If you haven't used the card at all since you discovered the problem, meaning you've merely moved the photos off of it and it is now empty, perhaps even formatted, but no low-level formatted, then you have a good chance of being able to recover most of the photos--basically undelete them.  If you've shoot more photos over the top of the deleted ones or low-level formatted the card, the chance is lower than you'll be able to get the photos back.

  • Scanner not showing up in CS5 Extended after installing Illustrator 6

    I have been working with Photoshop CS 5 Extended without any problem. I installed the TWAIN driver for it and when I go to FILE ---- IMPORT My scanner would show up and I could scan right ionto photoshop. That's how I like to do it.
    I installed Illustrator 6 the other day, and when I went to scan something into Phostoshop CS 5 today, I noticed that my scanner was not in the FILE ------- Import menu. I can see that the TWAIN file is where it's supposed to be in the plug-ins - Import Export folder.
    Why is it not showing up in my Photoshop FILE ---- IMPRT menu?
    Is it because I have CS5 and Illustrator 6?
    Is it a 64-bit mode --- 32 bit Mode thing? I tried to switch it to 32 bit mode, but there is no choice for it under the GET INFO menu.
    Please help me find a way so I can scan directly into Photoshop CS 5 again using my FILE -- IMPORT menu button.
    Thanks in Advance

    Some more info is needed and it wouldn't hurt if we saw install logs.
    Mylenium

  • Image Capture: Scanner not recognized

    Image Capture does not recognize my HP C5180 when it it plugged in. It prints fine and is recognized by the HP utility.
    Since the update to 10.6.7 today, I am also having problems with my other scanning software.
    I uninstalled and reinstalled the most up to date HP drivers after the update to 10.6.7

    piatigorsky wrote:
    ... What's worse, there are no new drivers for my machine in Software Update. Anyone know how to solve this?
    I would say to not rely on the software update app to provide new third party software. brother and hp do a good job working with apple to get their software included, but many (like my canon) do not. also, the software might only be up to date for a certain length of time. I always check the third party peripheral company's support section for my specific product rather than use apple's blanket approach for all drivers for that brand. for example, the last time I had an hp update show up, I think it was around 300+ mb in size, or at least it was that much or more for initial installation. to download just the software for my specific hp model (which is rarely used in favor of my canon), it was <10mb.
    the point is to check with the eom support site instead of waiting for apple to supply it for you. you'll get it faster it you check back often enough, and you'll only get what you need, not everything. go to hp's site, type in "model### driver" and it should get you right to the page to dl that software.
    good luck. I will say that 10.6.7 and the latest safari have both been very disappointing for both functionality and speed. I don't think there is a direct connection though — except for 10.6.7 failing to work with my older scanner driver (the printer part still worked fine).

  • EPSON SCANNER NOT RECOGNIZED AFTER ML UPGRADE.

    Mac Pro 2009,  8GB RAM, ATI Radeon HD 4870 512 MB, OSX 10.8.2 
    I hope I can make myself clear... I just upgraded to ML and right now I'm not so sure it was a good idea BUT I am going to struggle thru the issues...
    The big issue is that I now have to replace Photoshop CS.
    I do not want to replace my perfectly good scanner. When I select the scanner (epson perfection 4490 photo scanner) I get this popup window.No explanation on where to go from here.
    I went to the Epson site and found the driver needed for this upgrade. It tells me to use the Mac Software update feature and download the correct update from there.
    I did as directed and the needed scanner update is not there AND this is the only way it will work per Epson.
    Any help will be much appreciated
    Wally

    Thanks Eric - that would be a pain in the toot. I tried it and it looked like it was going to work. It recognized the scanner and let me do an overview and crop what I wanted but it would not let me change any options such as resolution, etc.. I started scanning, heard a few unfamiliar noises and the "no scanner available" message. I close Image Capture and reopened and get "no camera or scanner available".
    Thanks for your input Eric.
    Wally

  • HP M2727 printer/scanner not recognized as scanner

    I have HP M2727 printer/scanner but the OS X system does not recognize the scanning function.  Consequently I cannot use "Image Capture" or "Preview" to scan.  The HP Director that was working does not now work.  Currently on OS X - Version 10.9.5
    Any ideas?

    Have you checked for an update to HP Director?
    VueScan
    VueScan FAQ

Maybe you are looking for