Scanner not showing up in CS5 Extended after installing Illustrator 6

I have been working with Photoshop CS 5 Extended without any problem. I installed the TWAIN driver for it and when I go to FILE ---- IMPORT My scanner would show up and I could scan right ionto photoshop. That's how I like to do it.
I installed Illustrator 6 the other day, and when I went to scan something into Phostoshop CS 5 today, I noticed that my scanner was not in the FILE ------- Import menu. I can see that the TWAIN file is where it's supposed to be in the plug-ins - Import Export folder.
Why is it not showing up in my Photoshop FILE ---- IMPRT menu?
Is it because I have CS5 and Illustrator 6?
Is it a 64-bit mode --- 32 bit Mode thing? I tried to switch it to 32 bit mode, but there is no choice for it under the GET INFO menu.
Please help me find a way so I can scan directly into Photoshop CS 5 again using my FILE -- IMPORT menu button.
Thanks in Advance

Some more info is needed and it wouldn't hurt if we saw install logs.
Mylenium

Similar Messages

Scanner not recognized in PS CS5 even after downloading twain plug-in

Am trying to get my Epson scanner (Perfection 3200 pro) to show up in the imports submenu. Have downloaded the CS5 TWAIN plug-in, and changed PS to start up in 32 bit. Scanner has current driver. What am I doing wrong?
Thanks for any help!

Bye bye Epson. A V300 photo scanner is NOT old but that response from their tech dept sounds all too typical.
I've had more trouble with the 2 Epson products I bought than with any other brand. The v300 failed after 2 months and took weeks to be repaired. My first R800 was doa. By way of contrast, Canon devices perform superbly and their support is first rate.
Epson have a lousy telephone customer support system (operating out of Bombay I think) and an appalling online support (not that Adobe is much better). And Adobe are far from guiltless. ealier versions of Photoshop did recognise scanners for importing images and Adobe should have kept faith with the very many users who have used this facility with earlier versions of photoshop. I hate it when two manufactures pass the buck back and forth like this.

Java(TM) not showing up in add-ons after installing?

Java Deployment Toolkit shows up but not Java(TM) Runtime!
I installed a fresh copy of Mozilla Firefox and a the latest 64 and 32-bit versions of the latest Java then restarted my PC. When I run Java programs on my browser it says that I have a missing plugin...
It used to work before with the same version of Firefox but with the older Java.

installed it. no luck.
it works with internet explorer 32 and 64 bit though.

Why is my WD My Book for Mac not showing up on the finder after installing Mavericks?

I recently upgraded to Mavericks. I have a WD My Book. I had received emails from WD stating that the software from WD had to be removed from the Mac before installing Mavericks. So I waited until I received an email from WD saying they had resolved the issue. I upgraded to Mavericks and used the new Drive Manager and SmartWare software from WD. The software (WD) recognizes my iMac, but the WD My Book does not appear through their software or in the Finder on my iMac.
I've called WD twice and it seems they have no idea what to do. They replied with an email for software to recover my files. But I can't even see the files on the My Book drive to recover them. Is this a Mavericks issue? Do I need to download something from Apple? I don't think the issue is to recover files. It's just that the iMac is not recognizing the drive at all.
Help!
Thanks,
Jose.

WD new software and firmware is having serious issues.
http://community.wd.com/t5/External-Drives-for-Mac/bd-p/passport_mac
DO NOT use HD software
nobody should do that.

Can't get scanner to show up in CS5... Twain & 32-bit mode didn't work!

I have an Epson Perfection 2400 scanner and Snow Leopard with CS5. I installed the optional plugins for CS5 that included the Twain plugin which is in the Import-Export plugin folder. I also set Photoshop CS5 to open in 32-bit mode and it still will not show the scanner.
The scanner shows up in the System Preferences under Printers & Fax and I can scan from there. I would really like to be able to scan out of Photoshop. Please help if you can! Thank you.

KPUB wrote:
…just fyi... we have an Epson Perfection V350 Photo that is on another computer using the same hardware (Intel-Based Mac, Snow Leopard, CS5) and it does show up in Photoshop after installing the Twain driver and opening Photoshop in 32-bit mode…
Assuming you did install the scanner driver on this other machine, you may need to trash your Photoshop's preferences by holding down Command+Option+Shift as you launch Photoshop, then checking the appropriate box in the ensuing dialog box.
KPUB wrote:
I have searched online and in the forums and they all seem to just say install the Twain plugin and open in 32-bit mode…
No, what all those forums messages advise is to forget about scanning from inside Photoshop. I'm pretty sure that's what Christoph Pfaffenbichler was implying.
Stand-alone scanning utilities like VueScan and $ilverfa$t or your scanner's own stand-alone scanning software do a better job and they don't tie up Photoshop while you scan.
Wo Tai Lao Le
我太老了

HT1386 There are songs in my library that do not show up on the device after syncing

There are songs in my library that do not show up on my ipod after syncing.
Why would this happen ?

Do they play in iTunes on the computer?
Are they from a different source or format that the ones that do sync?

My app. not showing on App Store anymore after using In-App purchase

It's more than a week that my app is not showing in it's category, after Apple released the new version, in the new version I used In-App purchase and both In-App purchase and the new version of the app are approved by Apple but they never showed up in their category since.
It seems it's happening to the new one which was approved yesterday and is disappeared from it's category under new releases section ( posted date was correct the same day it was approved )
Does any body else has this issue ?

after Apple released the new version
Also know as an 'update'...
Looks like Apple has quietly changed the process where updated apps could be dated the day they were approved (more recent than the original release data) and show up at the top of the recently released apps all over again.
Updated apps will not appear at the top of the recently released list any longer, it seems.
If you search on your app by name, etc., it should still be there. If it is gone completely, use one of these email contacts...
Application Questions:
For general questions about applications or application requirements, contact:
[email protected]
Legal Questions:
For legal or contractual questions, contact:
[email protected]
Financial Reports (Monthly), Tax & Banking Questions:
[email protected]
new vendor setup, name changes, change of address
[email protected]
bank questions such as routing numbers, zengin codes, swift codes, etc.
bank account changes
[email protected]
submitting tax forms (W8, W9, Japan tax forms, etc.) year end tax questions re: 1042s (1099s go to A/P dept)
anything that says "tax" or "IRS"
[email protected]
missing payments, can't reconcile reports to payments, European Invoices
Sales and Trend Reports (Weekly and Daily):
For questions about weekly and daily reports contact:
[email protected]

How to hide or do not show the receipt's name after miss called?

1. How to hide or do not show the receipt's name after miss called?
2. I do not want to show my message statement in the screen.

I have also registered to this forum to inform that the problem with showing the MAC-address in the sidebar of the finder is still not solved.
The strange thing is that the Embedded Web Server says:
"This specifies the Bonjour domain name assigned to the device, in the form <host name>.local. If a user-specified host name has not been assigned, the default host name HPxxxxxx is used, where xxxxxx are the last 6 digits of the LAN hardware (MAC) address. This option cannot be modified."
But I did assign a user-specified host name and that name does show-up everywere (also within Bonjour), except in the sidebar of the finder (hp###xx##x####). Lots of people have the same issue, when searching on the interet, but not one has found the solution.
Please help with solving this issues?

The approver does not show in the approval preview after saving sh. cart

Hi ,
I would appreciate if anyone can reply me for fixing the problem.
Problem: The approver does not show in the approval preview after the shopping cart is saved, however before saving the shopping cart it shows the approver in the approval preview. We are using two workflows: WS10000060 Auto approval and WS10000276- 1 level spending limit approval.
Details of the problem:
The following steps specify the problem in detail , it is applicable for both the workflows WS10000060 Auto approval and WS10000276- 1 level spending limit approval.
1.     Shopping created
2.     The approval preview shows the approver ( please see #1 in the attached document) before saving the shopping cart.
3.     Shopping cart is saved.
4.     After saving , Check status transaction shows the shopping cart in status awaiting approval
5.     The section approval shows No workflow started , application error occurred
6.     T.Code SWI1 shows the workitem created for the shopping cart but in error.
7.     The work item container does not show any agents
I would appreciate it anyone can reply as to how to fix it ASAP.
Best Regards
Pawan

Hi Disha,
I have synchronised through SWU_OBUF several times since yesterday , but still at the same place.
In the workflow customising - The only red entry which I have is for check entries from HR control tables under Mainiatin definition env. and Mainiatin guded procedure for gateway under guided procedure (new in SRM 5.0) .The verification workflow works fine . Also I think these entries will not impact the workflow functionalhese were red even in my earlier system .
SLG1 shows all green entries and there are no entries in RZ20.
I have specified task TS10008126 as general task as I want anyone who is identified by SLAapprover should be able to process the workitem and as per documentation I can specify this task as standard task.
What should I do.. , anything am I missing .
Thanks and Best Regards
Pawan

I have added two new extension on CUCM, Directory not showing in attendant console even after resynch on CUCM and attendant cosn

I have added two new extension on CUCM, Directory not showing in attendant console even after resynch on CUCM and attendant cosnole
Any idea?

Hello,
Can you tell us what versions of CUCM and CUxAC you are using? Just extensions alone in CUCM will not sync to the corporate directory within the attendant console application. You will at least have to have user's associated with those extensions and depending on your rule set within the console that should then bring those extensions into the console directory.
Thanks,
Tony

Hello LR 5 is not showing me the Radial Gradients after I use them, it's been apply but I can't edit them since I can't click on them. (Linear gradients work fine)

Hello LR 5 is not showing me the Radial Gradients after I use them, it's been apply but I can't edit them since I can't click on them. (Linear gradients work fine)

[ H ] key to Hide/Unhide

A movie i purchased does not show up in the download after it suddenly stopped while downloading over half way through

a movie i purchased does not show up in the download after it suddenly stopped while downloading over half way through.. help!

I totally agree, I am not going to discredit your comment as everyone is entitled to their opinion as I am BUT, I will not bad mouth other members, especially since may have not have written my initial statement in a logical manner so Ill try and answer them in order to your response.
1. I DO LIKE iTunes in general and on the whole BUT I dislike the new update, iTunes 11, it has completely buggered everything up.
2. Prior to the update, everything worked brilliantly, including Apple TV. It was user friendly and was easy to use. The new update is counter-intuative and is hard to find, fix anything and as I have had to find out at my cost, reset my Apple TV and start downloading all over again. So let me reaffirm, it is iTunes11 I find hard to fathom, not the old iTunes.
3. No I am not a developer but I have been using PC's for over 20 years so I do know how one works.
4. Good Question about who would help me, again, it is someones opinion against someone elses. One day, I may write something that generally people agree with, another they may not, depends on the subject.
5. " I do not love Apple" ?yet I have an iPhone 4s, iPad and Apple TV, find that an illogical comment!
6. I have made a General Search on the forums on the subject and the general consensus is that the new update is one update to far.
7. Oh, I am not a genius otherwise I would have solved the issue in the first place!
Just to re-iterate, I am not bad mouthing Apple in general, all I am saying is that iTunes 11 is one update to far and I am not the only one saying it.... some have gone a lot further than I have, again, their opinion and who am I to argue with them as I have an opnion as you do and I will most deffinatly not bad mouth a member because I disagree with them for the above reason, debate it, yes, not belittle them.
Hope these have cleared up my initial statement?

HT4623 my phone does not show up in my computer after update

my phone does not show up in my computer after update

Hey there, i got the same Problem with my MacBook Pro (Mavericks 10.9.4) and two iPhone´s 5 with the iPad 2 and the iPad Air, (all with iOS 7.1.2) since 2months. SOLUTION???
Since the change of Snow Leopard on Mavericks, the entire system of the MacBook is much slower. This is already noticeable at the beginning (start the MacBook Pro). It runs through the entire software. z.Bsp. Open Safari / Outlook, iTunes and more. for about 2months absolutely no back-up of my devices is possible!!
Every time when you connect the hardware (iPhone 5 / iPad 2 / iPad Air) iTunes stops responding and needs to close above EXIT NOW!! No back-up's my hardware (see above) possible!!!
but iPhoto is running with the devices and at least I can transfer the images.

How come my mac isnt showing my external hard drive after installing os x maverick? and how to i fix that??

how come my mac isnt showing my external hard drive after installing os x maverick? and how to i fix that??

How do you mean it isn't showing the external drive? If you mean on the desktop, click Finder on the menu bar, Preferences, General and check the boxes for Show these items on the desktop - make sure hard drives is checked.
If you mean it is not showing in Finder or Disk Utility, make sure it is turned on, reboot and see if that mounts it so it shows up.

Numbers does not open with the main user after installing mountain lion. It works flawlessly when I use the second account on my mac. What got corrupted in the admin-account, something in the user-library? How can I fix it? I´m kinda desperate...

Numbers does not open with the main user after installing mountain lion. It works flawlessly when I use the second account on my mac. What got corrupted in the admin-account, something in the user-library? How can I fix it? I´m kinda desperate... (the same happens with the other iWork-Apps!)
Looking forward to hearing from somebody with a littlemore expertise than me, Chris

you can remove preferences files by navigating to the Preferences folder for your user as follows:
0) Quit ALL iWork apps (Keynote, Pages and Numbers)
1) from the Finder select the menu item "Go > Go To Folder…". This will bring up a dialog:
2) enter the path "~/Library/Preferences" (no double quotes)
3) find the files:
com.apple.iWork.Keynote.plist
com.apple.iWork.Numbers.plist
com.apple.iWork.Pages.plist
and move these to the trash. I would NOT empty until later.
4) restart Numbers

Scanner not showing up in CS5 Extended after installing Illustrator 6

Similar Messages

Maybe you are looking for