Scanner not working with new software?

Recently I bought and updated my computer with Snow Leopard. But when I went to do my first scan after updating, HP Photosmart told me that it could not find my scanner. Before, I came here to find a way to connect my scanner to my mac and I received a download and installed it. What do I need to install now to make my scanner work with my computer?
Oh, and the scanner I have is a HP Deskjet F300 Series

bimms4 wrote:
The only additional issue is that I am connected via wifi.
Any suggestions please?
I think that's your problem. I've got a wifi printer (Brother) that works great in every way - except scanning via wifi. In order for scanning to work it has to be connected via USB or ethernet for it to be recognised. Shame, needing a cable just for scanning purposes.
I expect there are some wifi printers/scanners out there that work completely wirelessly but it doesn't include mine or the few HPs I've set up elsewhere.

Similar Messages

TS1559 why are 4s's not working with new software and apple won't come good

I have a iphone 4s with the new update is making my phone slow and the wifi is not working. 200.00 to fix it. I have apple laptop, desktop, 4 iphones two 4s and two 5c's and they will not fix what their update did to my phone. Any feed back to help resolve this would be appreciated. I put it in the freezer( an online solution), restarted it to factory settings, reset my wifi and nothing everyone one says there are many 4s's that are doing this since the new software. Sounds like they just want you to buy new phones and my contract is not up for one year with my provider, I am very frustrated and disappointed.

burkey7669 wrote:
I put it in the freezer( an online solution),
No intelligetent person puts electronics in the freezer.
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). If none of this resolves, then the device should be taken to Apple for evaluation.
If Apple determines the device has suffered a hardware failure, they will either replace under warranty (if under warranty) or offer an Out of Warranty replacement.
So what exactly is the problem? They offered an Out of Warranty replacement for the defective device.

Zen Micro Photo not working with new XP SP2 install

Okay so my Zen Micro Photo stopped being recognised on my computer about ten months ago when I upgraded to WMP (for BBC iPlayer - it's compulsory to have it). Anyway I li'ved with this and have now got thoroughly sick of the same songs and nothing new so I have done a fresh install (on a brand new hard dri've) of Windows XP SP2 WMP9 with the sole intention of using this install/hard dri've?for the player. I used the original installation disk and it prompted me to upgrade to WMP0 as I installed everything. There were no errors during the install and I rebooted when prompted to.
When I attach the player it is recognised by the machine (task bar icon and correctly labelled in System > Hardware > Device Manager which reports it to be?working okay) but the Creative media software says "player not attached" when it is. It is not visible on My Computer as a dri've so I STILL have no access to the player. Player screen reports "docked" with a logo and is flashes a charging icon. Driver v5.2.0.0. The player plays fine but hasn't had new music on in almost a year
There is nothing else on the XP install (IE6 and everything - argh!) I did the registry permission tweak thing mentioned?here:?http://support.creative.com/kb/showa....aspx?sid=9287?but it didn't do anything.
Any help greatfully received!

Re: Zen Micro Photo not working with new XP SP2 install. Have you installed this plug-in?
Creative PlaysForSure Devices Plugin 5.00.36 for Creative MediaSource 5 Player/Organizer
Filesize : 27.9 MBDownload

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed?

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed? I am using Firefox Beta for android and I also tried just Firefox.

Please check the Play Store app for any Flash updates and install them if present.

Home sharing does not work with new mountain lion update.

home sharing does not work with new mountain lion update. Does anyone else have the same issue. Updated all computers in my home, deauthorized and reauthorized each computer. turn off home sharing and turned it back on. don't know what else to do..please help...

Our Apple TVs continue to lose connection ever since installing Mountain Lion on the host computer. The only thing that fixes them is to quit and relaunch iTunes, which only works unti the ATV goes to sleep. If a movie is paused for more than a few minutes and the ATV goes to sleep, pressing play again on the remote is greeted with "There are no movies on this computer" or "Turn on Home Sharing."
If we stop a video on one ATV and attempt to resume it in another room, the error begins again. The other ATV can't connect until iTunes is relaunched.
My guess is that it has something to do with the new [annoying] security settings. But I still haven't found a fix other than restarting iTunes everytime we want to watch something from our downloads. Fail.

Line-in not working with new driv

Has anyone else had issues with the line-in jack not working with new drivers? Is there a way to get it to work??Very frustrated. Is there a link to the beta drivers, they worked better for me then the new one.

The line input on the mini requires a 'line-level' signal, so the only microphones that work are ones that have an amplified output. Standard mics don't generate enough voltage to drive the mini's amplifiers.
That's the reason the mics work with the Griffin device (it has an amplifier) but not the mini directly.

Xml code not working with new version

Hi,
my following code is not working with the xalan 2.7.0 version. Any one can help to convert this to work on new version.
import java.io.*;
import java.util.*;
import org.xml.sax.*;
import org.apache.xalan.xslt.*;
public class XML2Edifact
public static void main(String args[])
throws SAXException, IOException
if(args.length < 3)
throw new IllegalArgumentException(
"Usage is XML2Edifact in.xml xsl.xsl out.edi");
InputStream sin = new FileInputStream(args[0]),
sxsl = new FileInputStream(args[1]);
OutputStream sout = new FileOutputStream(args[2]);
EdifactFormatter formatter = new EdifactFormatter(sout);
XSLTProcessor processor =
XSLTProcessorFactory.getProcessor();
XSLTInputSource in = new XSLTInputSource(sin),
xsl = new XSLTInputSource(sxsl);
XSLTResultTarget out = new XSLTResultTarget(formatter);
processor.process(in,xsl,out);
}

Solved, had to repair the Z10 with the PC! Would have thought that upgrading software would have saved the environment so that this step was not needed (played with this for several weeks on-and-off).

Satellite A110 - WiFi switch is not working with new WiFi card

Hello Everyone
I have a problem with my Toshiba Notebook Satellite A110-178 (PSAB0E). I replaced the original WIFI card Intel 3945abg with Intel Link 5100 and on the new wifi card wifi hardware switch is not working.
New wifi card is discovered and drivers working correct but when I try to scan for wifi networks with IntelPro/Wireless software I have message to turn on hardware switch but it's turn on and not work. On old wifi card swich is working correct - orange light is on. On new card light is off and swich is not working.
Please help

Hi
Maybe you could enable the Wlan card using different way;
Go to device manager -> WLan card properties -> Advanced tab
There you could check if there is a option which would enables the WLan.
Its worth a try
Otherwise its a compatibility issue like suggested by PinkPanther
I read in different threads that this could happens if there is a different pin assignment on miniPCI WLan card and this could not match with the miniPCI slot on the mobo...

Logitech Pro 4000 not working with new Imac 24"

Just migrated from a G4 to the new Imac 24"
Cannot get the Logitech Pro 4000 to work with new mac.
Contacted Logitech and they said
"please note that the QuickCam Pro 4000 currently only supports up to Mac OS X 10.2.6"
However,the cam DID work ,even under 10.4.8 with the old G4...
Any ideas people..
Thanks!

Your nwe iMac is Intel based, which is why the old driver failed/ You could try the driver from IOXperts. They do not mention Intel support, but they do list your camera, and have a free trial.
<http://www.ioxperts.com/products/webcamx.html>

Isub not working with new imac

the help menu is telling me to make sure that the isub is plugged in, and then to make certain it is selected under sound preferences... the only problem is that the imac is not picking up that the usb is even plugged in- there is no isub option that comes up on the sound preferences.
the isub works fine on my older mac, but just is not being read on the new one. any guesses other than my old isub is obsolete with my new imac?
thanks
-pd

The iSub is sweet! It's the best sub I've ever had! There's no reason for it to NOT work with the new Macs. It's a bummer. I still have my iSub, maybe they'll start supporting it again someday.

Recovery did not work with new hard drive

The original Toshiba HD(250G, sata1) of my laptop( ) crashed.
I bought new one (320G, sata 2, Western digit )
The problem is that, when I tried to use the recovery CD that I used to use it with old HD before, it did not work with this new HD well!?
After cd1 and cd2 finish installing it ask to take it out then restart, I do so, but when it comes to setup setting of windows.
An error message come out says " Windows Setup could not configure Windows on this computer’s hardware”
It restart and says again " Windows could not complete the installation. To install Windows on theis compuiter, restart the installation."
I have been trying to solve this a lot, but no way
I tried what in this link, but it drive me with another problem http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/windows-could-not-complet...
I hope that I get the right thing to do, from ur forum by this post.
Thanks a lot

Did you folks search here for "advanced format drive"? People have had numerous weird problems with the new advanced format hard drives in older Toshibas. I can't look up all the threads for you. But here is one:
http://forums.toshiba.com/t5/System-Recovery-and-Recovery/Recovery-won-t-work-on-new-upgraded-hardri...

Why does my scanner not work with Yosemite

My father upgraded to Yosemite but now can't get his scanner to work with it. How can I advise him?

I have talked at length to Canon. Their support is normally very responsible and competent, but in this case, they say that they don't know if or when there will be a fix to the problem. All they suggest is that you download the drivers and reinstall them. They also suggest that you repair your disk permissions.
The problem is that after the first scan, the software tries to locate the scanner. After 90 seconds, there is a message saying that the scanner is in use by another application. Once you reply OK to that message, you can scan another document. So, it works, if you consider scanning a document every 90 seconds working. I don't.
The problem may well be Apple's, but resolution requires that Canon and Apple talk. They don't seem to be.

Printer not working with new router

I have a new router and my laptop with Windows XP is working Ok
My printer Deskjet 3520 network test result shows successful setup But it does not print when laptop requests
What can I do

Hi @Jobrig,
Welcome to the HP Forums!
I see that your HP Deskjet 3520 is not working with your new router, and I am happy to help with this connection issue!
For further assistance, I will need to know: if you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos, and if the printer is able to make copies.
In the meantime, please see the following:
This printing guide, Print Jobs are Stuck in the Print Queue.
This website, HP Wireless Printing Center, may also help.
Hope these guides will help you, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

MyDAQ fails Self-Test and will not work with any software

I cannot get the myDAQ to communicate properly. I did everything I could to make sure that the device was detected by the computer. It shows up in Device Manager under Data Acquistition Devices as NI myDAQ and in NI MAX as "myDAQ1", but I receive errors when trying to use it with any NI program.
Trying to self-test or reset the device in MAX gives these errors:
-The self test failed. -88705 The specified device is not present or is not active in the system. The device may not be installed on this system, may have been unplugged, or may not be installed correctly.
-There was a problem resetting the device. Error code: 80040383.
It also gives this error when trying to use the Elvis Oscilloscope:
-Error -200324 occurred at ELVISmx_DAQmx Create Channel (AI-Voltage-Basic).vi:1
Possible reason(s):
NI-DAQmx is unable to communicate with the device. Make sure the device is present in and accessible to the system, is not currently being reset, and is not reserved by another driver such as Traditional NI-DAQ (Legacy).
I have uninstalled and reinstalled and repaired all installed NI products twice. I updated to NI-DAQmx 9.8.0 and am using NI Elvis 4.5. I have checked NI Device Loader and mDNS Responder Service in Services and everything is running properly. I have also tried Reset Configuration Data in NI MAX several times. I turned Fast Startup off as suggested in one article. I have tried plugging it into every single USB port on my computer; all 8 of them. The blue led is on when plugged in, but I cannot figure out why it will not work with any of the software. I am running Windows 8 Pro 64-bit. Also, it completely works on the school computers running Windows 7 without any problems. I would like to have it functioning with all the NI software purchased, but all I want to do is use the oscilloscope software for now. It has honestly been way too much work and a huge loss of time for something that should work out of the box. Please help me resolve this, thanks.
Attachments:
ni_support.zip ‏341 KB

Hi chaka123,
I had already read that article so it wasn't anything I hadn't tried. I did, however, uninstall both NI DAQmx and NI ELVISmx, ran the registry cleaner and then plugged my device in. Now it shows up as USB Flash Firmware Updater. This is actually what it showed the first time I plugged this in out of the box. After much troubleshooting I was finally able to get it to at least recognize it as a myDAQ. This is problem I know others have had.
To answer your questions:
Does the Test Panels work at all?
I am not sure, I didn't try it before uninstalling. Now the Test Panels isn't an option because it is recognized as the Flash Firmware Updater.
Have you tried to delete the device in MAX?
Once again, I cannot because it shows up as Flash Firmware Updater.
Which is the color of the icon on the left side of “myDAQ1”?
It was green before the uninstall. Now it shows the USB symbol.
I tried deleting the driver. When I plugged the device back it, Windows started automatically trying to load a driver for it. Now it shows as NI myDAQ with a yellow exclamation symbol. In MAX it shows as NI myDAQ with a USB symbol. Under Driver Details it says "Windows does not have a driver associated with your device."
What folder can I manually point Device Manager to in order to load the correct driver?
Attachments:
devicemanager.PNG ‏40 KB

Hp Photosmart not working with new router

My Hp Photosmart D110a will not work wirelessly with my new Netgear N600 router. This is the second new router I have tried. With the first one Belkin I could at least get it to print from my PCs. But never with my IPad. Now the printer will not print from anything. I have reset it, entered new passwords etc. spent hours on the phone with tech support. What to do now?

@Ann99, welcome to the forums
I understand your Photosmart D110a model is not working with your new router. I will gladly do my best to help you.
I have some questions and some things for you to try.
1. Is the printer connecting to the wireless network successfully when you run the wireless setup wizard from the printers front panel or is the printer not found when you are running the installation from your PC?
2. What did tech support determine the issue was when you called them?
3. Here are some guides for you to try, these 2 guides relate to the questions I had asked in the first question:
Unable to Connect to a Wireless Network When Using WEP Encryption and Shared Key Authentication
The Printer Is Not Found During a Wireless Network Installation
4. What Operating System are you running on your computer?
5. Where are you running the installation from (disk, download or HP Printer Install Wizard for Windows for Windows)?
Please let me know all of the information and results from your troubleshooting above!
Have a terrific day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Scanner not working with new software?

Similar Messages

Maybe you are looking for