Scanner of Multifunctional HP Laserjet M1132 MFP doesn't work.

Hey folks,
I can't get the scanner of my multifunctional printer to work anymore. I have the latest versions of hplip and hpoj, sane and xsane as well.
When it is plugged in, the dmesg command shows the following:
[ 3980.912978] usb 1-3: new high-speed USB device number 5 using ehci_hcd
[ 3981.039508] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x042A
The scanimage -L command recognizes the device:
scanimage -L
device `hpaio:/usb/HP_LaserJet_Professional_M1132_MFP?serial=000000000QH3397RPR1a' is a Hewlett-Packard HP_LaserJet_Professional_M1132_MFP all-in-one
But in /var/log/errors.log this error is shown:
scanimage: io/hpmud/pp.c 627: unable to read device-id ret=-1
When I run xsane this message pops up:
Failed to open device `hpaio:/usb/HP_LaserJet_Professional_M1132_MFP?serial=000000000QH3397RPR1a':
Error during device I/O.
And in /var/log/errors.log I find this error:
Apr 21 11:35:50 localhost xsane: io/hpmud/pp.c 627: unable to read device-id ret=-1
Apr 21 11:35:54 localhost xsane: scan/sane/marvell.c 85: unable to load restricted library /usr/share/hplip/scan/plugins/bb_marvell.so: /usr/share/hplip/scan/plugins/bb_marvell.so: cannot open shared object file: Arquivo ou diretório não encontrado
Could anybody help me with this? I'm using Arch x86_64.
Thanks!

sane-find-scanner only recognizes the device:
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
# Also you need support for SCSI Generic (sg) in your operating system.
# If using Linux, try "modprobe sg".
found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x042a [HP LaserJet Professional M1132 MFP]) at libusb:001:005
found USB scanner (vendor=0x093a, product=0x2620) at libusb:006:002
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
But it doesn't get the scanner to work.

Similar Messages

HP Laserjet m1214nfh MFP Doesn't work after firmware updating

Hello
HP Laserjet m1214nfh MFP (USB Connetcion).
I downloaded the latest firmware (ver: 20130211 4 Mars 2013) and updated it.Now it doesn't work and on its LCD it prompts "Initializing" and after some seconds LCD turns off and again prompts "Initializing".
Please guide me.
thank you

Hi,
Please try plugging the printer to a direct power source without any power hub or surge protector usage and check if that may help.
If the same persists please contact HP support by following Technical support after you buy for your region below:
http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP Laserjet M1132 MFP on Mac OS 10.7 - No Scanner Detected

I just installed the HP Laserjet M1132 MFP on my mac mini (mid 2011) with OS X 10.7 (Lion).
I have the printer working fine with the right driver comming from the installation disk.
I have also upgraded the firmware to the latest one available for download from there site.
One thing happen during the installation was that I couldn't finish the installation properly at the time of applying custom settings, the wizard prompted me "You must have administrative right ....", which I have, and when mac OS needs it, he asks for it anyway. The only choice was to cancel, but drivers were installed.
Then, I launched HP Scan to check the scanner, and I have ... "No scanners availables" !!
I also run apple software update, but nothing!
Any help would be very much appreciated.
Regards,
Trezi!

Sorry if there are errors of grammar. I'm using google translator because I am Brazilian and I do not write in English,just read.
I bought my printer M1132 After installing the Lion, and came across the same error message. I managed to solve this issue by enabling the root user and installing the drives by the super user root. When you finish the installation, it did not show the error message described above, and the scannerfunctioned normally for the program "HP Director". The image capture MAC did not work, even the Readiris program that came with the printer. But the point I'm getting now typicallyscan the "HP Director"
As the root user is disabled by default, you should follow the tutorial below to activate the super user. Log in by root in the Login screen, click "Other User". Then type in the spacereserved for root user and then type your password. Shortlyfollowing section to install the printer driver as usual.
Steps to enable root user in Lyon:
From the Apple menu choose System Preferences....
From the View menu choose Users & Groups.
Click the lock and authenticate as an administrator account.
Click Login Options....
Click the "Edit..." or "Join..." button at the bottom right.
Click the "Open Directory Utility..." button.
Click the lock in the Directory Utility window.
Enter an administrator account name and password, then click OK.
Choose Enable Root User from the Edit menu.
Enter the root password you wish to use in both the Password and Verify fields, then click OK.
Important notes
Only the owner of a computer or its designated administrator(s) should have an administrator account or the root password.
Any user with an administrator account can become the root user or reset the root password.
A root password should be difficult to guess, containing both numbers and letters within the first eight characters.
A root user has the ability to access other users' files.
The root user has the ability to relocate or remove required system files and to introduce new files in locations that are protected from other users.
I hope it helped!!
Pr. Carlos Ricardo

HP Laserjet M1132 MFP on my MacBook Air.

I have installed HP Laserjet M1132 MFP on my MacBook Air. The scanner does work but the printer doesn't. After sending the page to print it shows on the screen that printing is finished but no printed picture goes out. What should I do?

Have you installed the latest printer driver?
http://support.apple.com/kb/DL907

HP LaserJet M1132 MFP: unable to save scan to file

Hi,
I just purchased a new HP LaserJet M1132 MFP. Everything is working fine except when using HP Director. It detects the device and scans. But when I try to save the file on my computer it doesn't succeed. Nothing is saved in the folder. What seems to be the problem?

Hi,
Did you installed the printer using teh original CD?
If so, can you see Mac OS X v10.7 listed as supported on its label?
I assume the CD will not be compatible with 10.7...
If this is the case indeed, go to Applications > HP Laserjet MFP folder (or anything similar) and follow the HP Uninstaller..
After uninstalling the software be sure to remove the printer from Print & Scan if it still exists...
Download and install the latest software for Lion below and check if that may resolve the problem:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Im-80903-5 &cc=us&dlc=en&lc=en&os=219&product=3965851&sw_lang=
Hope that helps,
Shlomi

Hp laserjet m1132 mfp can't print from remote desktop

Hi, i've installed HP LASERJET M1132 MFP in my PC with windows 7 ultimate 32 bit and it works fine. But when i connect using remote dekstop with our Windows server 2008 r2 64 bit. its not printing. error "test page failed to print , would you like to view the print troubleshooter for assistance?" and it doesnt solved the problem.
please help

Thank you for your interest.
The situation is a bit different than the picture. Windows Server 2008 R2 is available through the WAN. LAN is plugged into the PC-1, PC-2 and Konica Minolta printer. HP LaserJet M1120n MFP is connected via USB to the PC-1. OKI ML 3320 printer is connected via LPT also to the PC-1. PC-1 has access to Konica Minolta printer via the LAN. PC-2 also has access to Konica Minolta printer via the LAN. PC-2 is also available for PC-1 HP and OKI.
It seems to me that I found the explanation for the printing problems - some of "my" printers are simply not compatible with Windows Server 2008 R2. I found on the net the following information:
http://www.windowsservercatalog.com/item.aspx?idItem=cdde267a-800d-2d9f-1f0c-225cabd6838e&bCatID=128...
http://www.windowsservercatalog.com/item.aspx?idItem=31df9819-ca52-4684-dc3b-8e31b70c77d7&bCatID=128...
http://www.windowsservercatalog.com/item.aspx?idItem=6475235d-8dbb-9e95-11dc-3575d569acc2&bCatID=128...
http://www.windowsservercatalog.com/item.aspx?idItem=59731747-9976-8d51-dcbb-7664cbc17a89&bCatID=128...
I think I can close the topic.
(translated from Polish into English using Google translator)

HP LaserJet M1132 MFP does not print from a remote desktop

Hi,
I have a HP LaserJet M1132 MFP (product number CE847A) connected to a PC (MS Windows XP Home Edition + SP3) via USB. There is no problem with the printer. However, when the connection using Remote Desktop (it's set to use local facilities and resources, or in my case, printers, and serial ports) to the server (MS Windows Server 2008 R2), I can not even print a test page from a remote desktop.
Error message: "Print a test page failed. Do you want to display a tool to solve problems with printing to get help?"
But it does not lead to nowhere, as expected is access to the internet, and I have not it from a MS Windows Server 2008 R2.
The same error is for the HP LaserJet M1120n MFP.
I have installed on my PC other printer - old OKI ML321 (needle) connected to a PC using LPT cable and network printer Konica Minolta 1690MF (in another room). In both of these printers can easily print a test page from a remote desktop.
Please help me.
This question was solved.
View Solution.

Thank you for your interest.
The situation is a bit different than the picture. Windows Server 2008 R2 is available through the WAN. LAN is plugged into the PC-1, PC-2 and Konica Minolta printer. HP LaserJet M1120n MFP is connected via USB to the PC-1. OKI ML 3320 printer is connected via LPT also to the PC-1. PC-1 has access to Konica Minolta printer via the LAN. PC-2 also has access to Konica Minolta printer via the LAN. PC-2 is also available for PC-1 HP and OKI.
It seems to me that I found the explanation for the printing problems - some of "my" printers are simply not compatible with Windows Server 2008 R2. I found on the net the following information:
http://www.windowsservercatalog.com/item.aspx?idItem=cdde267a-800d-2d9f-1f0c-225cabd6838e&bCatID=128...
http://www.windowsservercatalog.com/item.aspx?idItem=31df9819-ca52-4684-dc3b-8e31b70c77d7&bCatID=128...
http://www.windowsservercatalog.com/item.aspx?idItem=6475235d-8dbb-9e95-11dc-3575d569acc2&bCatID=128...
http://www.windowsservercatalog.com/item.aspx?idItem=59731747-9976-8d51-dcbb-7664cbc17a89&bCatID=128...
I think I can close the topic.
(translated from Polish into English using Google translator)

HP Laserjet M1132 MFP is too slow over the network!

Hi,
My HP Laserjet M1132 MFP is too slow over the network!
I have connect the printer to a windows XP 32bit SP3 using UBS port. The printer works fine on the local computer but when sharing it over the network it works too slow, for example with print test page it takes about 45 seconds to print and for other documents it takes much longer time.
I have installed the latest driver form HP website and upgrade the firmware it the latest version.
It happens on other Windows XP machines as well.
I connected the printer to my laptop (Windows 7 64bit) and it works fine (No delays over the network) and it seems that this problem have some relations with the windows XP Driver.
I have used local port trick on remote machines (instead of regular method) like this:
''add a local printer;
'new port'
'localport'
\\XPcomputer\HPPrinterName as port name
but still nothing!
There is nothing wrong with the network, we use to use a Samsung printer on the same machines over the network with no problem.
I Really appreciate your HELP!
This question was solved.
View Solution.

BEHZAD_T, how is the printer connected to the network (wireless or Ethernet)? If it is slow wirelessly, I would suggest trying to connect the printer to your router with the Ethernet cord and install it to the networked computer that way.
Another question is, relatively speaking, how close to your router are the Samsung printer and the HP printer? Depending on the distance (and what stands between the devices) there can be a lag between sending a print job and it being received by the printer.
Let me know!

2101nw print server (and LaserJet M1132 MFP) – installation problems on Windows 7 (64bit)

For two years, I've been a happy user of an HP printer (LaserJet M1132 MFP), wirelessly connected to my home network thanks to a HP Wireless G Print Server HP 2101nw.
A week ago, a new machine came in and – to align operating systems - I had to install Windows 7 (64 bits) also on my laptop (previously we were running Windows XP).
Then, I went on with the reinstallation of HP software, for the print server and the printer.
And it was a disaster.
After the failure of the first installation ("Installazione non riuscita"), I went through a series of attempts of uninstalling and reinstalling, again and again, by various methods. Uselessly. Even Revo Uninstaller did not help.
Then, looking for information over the web, I read there was a known problem of incompatibility of the print server’s driver with 64-bit environment, and that HP was not going to rewrite it .
You can imagine my disappointment.
Now, hopefully, I write in this forum to ask for help. My request is twofold:
1) I would like to properIy clean up my laptop and remove all that bad installed sw (both of the print server and the printer), so that at least I can successfully reinstall printer software for using it via USB cable.
For this purpose, can you please give me your suggestions ?
2) I would like to know: It is true that there is no driver available for use this print server on Windows 7 (64 bit) ?
I’m asking because I found these pages which seems to give some hope, but I’m not so sure ... :
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/HP-2101nw-Wireless-G-Print-Serv...
http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/HP-2101nw-wireless-printserver-on-w...
Many thanks in advance for your help
Simone

For two years, I've been a happy user of an HP printer (LaserJet M1132 MFP), wirelessly connected to my home network thanks to a HP Wireless G Print Server HP 2101nw.
A week ago, a new machine came in and – to align operating systems - I had to install Windows 7 (64 bits) also on my laptop (previously we were running Windows XP).
Then, I went on with the reinstallation of HP software, for the print server and the printer.
And it was a disaster.
After the failure of the first installation ("Installazione non riuscita"), I went through a series of attempts of uninstalling and reinstalling, again and again, by various methods. Uselessly. Even Revo Uninstaller did not help.
Then, looking for information over the web, I read there was a known problem of incompatibility of the print server’s driver with 64-bit environment, and that HP was not going to rewrite it .
You can imagine my disappointment.
Now, hopefully, I write in this forum to ask for help. My request is twofold:
1) I would like to properIy clean up my laptop and remove all that bad installed sw (both of the print server and the printer), so that at least I can successfully reinstall printer software for using it via USB cable.
For this purpose, can you please give me your suggestions ?
2) I would like to know: It is true that there is no driver available for use this print server on Windows 7 (64 bit) ?
I’m asking because I found these pages which seems to give some hope, but I’m not so sure ... :
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/HP-2101nw-Wireless-G-Print-Serv...
http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/HP-2101nw-wireless-printserver-on-w...
Many thanks in advance for your help
Simone

Laserjet M1132 MFP status offline

My laserjet M1132 MFP does not print.i tried some tips in the troubleshooting.all does not work.even the doctor scan after it is downloaded it closes automatically without opening.i dont know what is the problem

Hi , I see that you are experiencing issues printing. I would like to help you. Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation. Make sure the printer is directly connected to the computer by the USB cable and not a USB hub. Try and print a hardware self test on the printer to find out if it is a hardware or software issue.On the control panel, press and hold the Cancel button until the Ready light starts blinking, and then release the button.Did the self test print? Please go through the steps in this document to see if it will help. 'Printer is offline' Message Displays on the Computer and the HP Printer Will Not Print. What operating system are you using? How to Find the Windows Edition and Version on Your Computer. If you appreciate my efforts, please click the 'Thumbs up' button below.
If there is anything else I can help you with, just let me know. Thank You.

HP LaserJet M1536dnf MFP doesn't automatically answer faxes

My new HP LaserJet M1536dnf MFP does not automatically answer fax calls. I do not have a phone hooked up or an answering machine/voicemail. The 'Answer Mode' is 'Automatic'.
We use an analog converter to connect it to our internal digital VOIP phone system. The prior MFP that was connected didn't have any issues with answering/printing faxes.
I can see "Incoming call" on the display but it just rings and rings. If you press the 'Start Fax' button when it's ringing, then it will proceed with connecting and receive the fax, otherwise it eventually drops the call. This is not good seeing that a lot of faxes come in when the office is closed or otherwise unattended.
I tried the "Fax/Tel" setting, but that didn't work either.
Please help!
Thanks, much!!!
This question was solved.
View Solution.

Hi @DW-OH,
I see by your post that the faxes won't come through when set to automatic or Fax/Tel, but you can manually receive the fax. I can help you with this.
Update the printer's firmware.
HP LaserJet Pro M1536dnf Multifunction Printer Drivers.
Select your operating system, click next, click the link for firmware.
Please check your private messages for the reset for the printer, I have seen this resolve this issue previously.
In the forum beside your handle name just click on the envelope to view it.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Laserjet M1132 MFP says,"no scanners available."

Hi, my HP Laserjet M1132 scanner used to work. Now all of a sudden when I open the HP Director or HP Scan the message says "no scanners available".
I worked fine some time ago. I downloaded and instaled latest drivers, but problem persists. Printer does work, sanner is the issue.
This is happening in both my Macbook Air, and in the iMac. (both same Lion OS X 10.75).
Thanks for your help.

Let's make sure that there isn't a problem with disk permissions that causing this. The link below will take you to a post that will guide you through the process. Let me know what happens.
Basic Printer Troubleshooting Steps for Mac
I am a printer tech for HP.

Sending fax over hp laserjet 1536 ? Doesn't works anymore under 10.9.4

Hello
Since the Update to 10.9.4 it isn't possible anymore to fax from my mac over the HP LaserJet 1536. I used this funktion maybe 10 times a year. The receiving of the fax I have never used because this is done by the Router (Fritzbox 7390).
Their is no software availible on the apple side which isn't already installiert. I feel not comfortable to load a much older Software from the original CD or the HP Site.
Any idea how to fix this, or has apple killed this functionality in mavericks 10.9.4?
Regards

It says in this document that the Fax driver (HP LaserJet M1530 MFP Series. Fax) is available:
OS X: Printer and scanner software available for download
Try resetting the Printing system, which forces OS X to re-find available drivers, both on Apple servers and already installed:
OS X Mavericks: Reset the printing system
I don't have that printer, but it looks like you have to add ( + ) it twice (one for fax) in Print & Scan prefs.

HP Laserjet M1005 MFP won't work with a DLINK DPR-2000 Print server.

I have an HP Laserjet M1005 MFP and am trying to connect it to a DLINK DPR-2000 Print server. After the setup no matter what I do the Laserjet shows up as offline on the print server. The print server recognises it as the correct model it's just always offline aned hence I can get nothing to print.
I have done the latest firmware upgrade on the printer to 20120910.
Any ideas?

Sounds like you are having an issue getting this printer to be recognized fully on the network the print server is set up on. First of all, what all can you tell me about the network environment it is operating on? I would suggest that you try installing the PL6 drivers fro this laserjet after removing the original software and see if that gives you greater control over the machine and its functions :
http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?locale=en_US&taskId=135&prodTypeId=...
Let me know how that goes!
I hope you are having a wonderful week, and I hope that the weather where you are located is as beautiful there as it is here!
-Spencer

HP Color LaserJet Pro MFP M177fw Not working with Fedora 14

Our ERP is compactible up to Fedora 14. But I newly purchased Printer(
HP Color LaserJet Pro MFP M177fw) is not working with this OS.
Give me a urgent solution

Hi @HealthITLadyRed,
I read your post and see that the printer is making noise and is stuck initializing. I would really like to be able to help you resolve this issue.
I have provided some steps to try to see if we can resolve this issue.
Check and remove any packaging material inside the printer and toner.
Disconnect the USB/Network/FAX and power the printer on Standalone.
Do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
If the issue persists, perform a power drain by disconnecting the power cord from the back of the printer and keeping the power button pressed for 30 seconds and in case of a power switch keep the switch in ON position for 30 seconds before reconnecting the power chord.
Update the printer's firmware by a USB connection. Software and Drivers.
Select Option 2 and wait for the page to load and then select the link for firmware. This resolved the previous posters issue.
I can send a private message with another step to try.
In the forum beside your handle name just click on the envelope to view it.
How is the printer connected? (USB/Ethernet/Wireless)
What happened prior to this issue? (paper jam, changed toner) Any feedback would be appreciated.
Is this a new printer?
If you appreciate my efforts, please click the Thumbs up button below.
If there is anything else I can help you with, just let me know. Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Scanner of Multifunctional HP Laserjet M1132 MFP doesn't work.

Similar Messages

Maybe you are looking for