Scanner Ops and Recommendations

I checked first "Printing and Faxing" and didn't see anything like my query, so this might not be the best area. But here goes...
I've never ownded a scanner and was wondering ....
What happens when one scans a document? What comes up on the desktop? What app opens? Do I need a certain app? I don't have Adobe or anything (that I know of).
What happens when one scans a photo? I imagine iPhoto opens ..?...
I would also greatly appreciate any suggestions on scanners. My needs would be elementary.
FYI, I searched Discussions for 'scanners' and saw several post s about non-compatibility after upgrading to 10.4 etc and I'm savy enough to search manufacturers' Web sites for drivers, etc.
Thanks for any ideas!
David
G4 500   Mac OS X (10.4.7)   700mhz upgrade; 768MB; Geforce FX5200; Acard 6280; NEC 3540A

I've used both Epson and HP scanners, and hands down, the Epson wins. It's not the hardware, but the software - you need to make sure that the scanner manufacturer gives more than just lipservice to supporting the Mac OS. My beef with HP is that they don't update the drivers as the Mac OS is updated. I needed a sheetfeeding scanner, and HP seemed to be the best choice, but the driver software was written for 10.1 and not updated until well after 10.3.7 was released. Regardless, the original driver software was highly unstable - crashing if you pressed the OK button too soon after you loaded the scanner. The updated software was equally unstable, and moreover, redefined the term "bloatware" - you couldn't just load the scanner and press a button - you needed to go through all sorts of wizards and choices via a moronware desktop program. The TWAIN drivers catastropically crashed in Photoshop, required a hard restart. As far as the sheetfeed results - if I scanned as a low-res PDF - each page was 500 mb in size, and couldn't be reduced or rescaled. I suppose, if I ever installed Paralells or Bootcamp, I might do better with the PC version of the software.
But anyway - you really weren't looking for a diatribe against HP, now were you?
If your scanning needs are modest and/or casual - don't pay more than $200 for a scanner, and USB 2.0 is fine. I currently use an Epson 4490 Photo Perfection Series. It has a hinged lid to accomodate books, and the software is very easy to use. You can either work from the TWAIN plugin in Photoshop or use the Epson Scan utility and set it to save in the folder of your choice.
Hope this helps,
Lita

Similar Messages

  • SAP SCM and SAP APO: Best practices, tips and recommendations

    Hi,
    I have been gathering useful information about SAP SCM and SAP APO (e.g., advanced supply chain planning, master data and transaction data for advanced planning, demand planning, cross-plant planning, production planning and detailed scheduling, deployment, global available-to-promise (global ATP), CIF (core interface), SAP APO DP planning tools (macros, statistical forecasting, lifecycle planning, data realignment, data upload into the planning area, mass processing u2013 background jobs, process chains, aggregation and disaggregation), and PP/DS heuristics for production planning).
    I am especially interested about best practices, tips and recommendations for using and developing SAP SCM and SAP APO. For example, [CIF Tips and Tricks Version 3.1.1|https://service.sap.com/form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700006480652001E] and [CIF Tips and Tricks Version 4.0|https://service.sap.com/form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000596412005E] contain pretty useful knowledge about CIF.
    If you know any useful best practices, tips and recommendations for using and developing SAP SCM and SAP APO, I would appreciate if you could share those assets with me.
    Thanks in advance of your help.
    Regards,
    Jarmo Tuominen

    Hi Jarmo,
    Apart from what DB has suggested. you should give a good reading on the following.
    -Consulting Notes (use the application component filters in search notes)
    -Collective Notes (similar to the one above)
    -Release Notes
    -Release Restrictions
    -If $$ permit subscribe to www.scmexpertonline.com. Good perspective on concepts around SAP SCM.
    -There are a couple of blogs (e.g. www.apolemia.com) .. but all lack breadth.. some topics in depth.
    -"Articles" section on this site (not all are classified well.. see in ECCops, mfg, SCM, Logistics etc)
    -Serivce.sap.com- check the solution details overview in knowledge exchange tab. There are product presentations and collaterals for every release. Good breadth but no depth.
    -Building Blocks - available for all application areas. This is limited to vanilla configuration of just making a process work and nothing more than that.
    -Get the book "Sales and Operations Planning with SAP APO" by SAP Press. Its got plenty of  easy to follow stuff, good perspective and lots of screen shots to make life easier.
    -help.sap.com the last thing that most refer after all "handy" options (incl. this forum) are exhausted. Nevertheless, this is the superset of all "secondary" documents. But the maze of hyperlinks that start at APO might lead you to something like xml schema.
    Key Tip: Appreciate that SAP SCM is largely driven by connected execution systems (SAP ECC/ERP). So the best place to start with should be a good overview of ERP OPS solution overview, at least at the significant level of depth.). Check this document at sdn wiki "ERP ops architecture overview".
    I have some good collection of documents though many i havent read myself. If you need them let me know.
    Regards,
    Loknath

  • Image MF4350d Scanner slow and erratic

    My mf4350d has suddenly started scanning slowly and the scanner starts and stops when scanning . This occurs with the document feeder or  or when scanning from the platen glass. The  scanning using the mf tool box 4.9 or using program called paper port. Both programs have worked successfully in the past. In addition I have a epson scanner/printer which does not have any problem scanning at a acceptable speed.
    Any Ideas whether this is software or hardware?

    Hi Vis.
    I know that slow scan speeds can be frustrating.  This issue could be caused by a few things, such as TWAIN conflicts, USB hubs or switches, or faulty USB cables.  The items I recommend checking, first, would be the length of the USB cable.  We recommend that the length be 10' or less.  If you're using a USB cable for the Epson, try connecting the cable between the MF4350d and the computer, or if you have another cable handy, swap it with the current cable.  If you have the units connected over a hub or switch, remove the MF4350d from the device and connect it directly.  Also, try connecting to a different USB port on the computer.
    Should the above troubleshooting steps not resolve the issue, we recommend that you Contact us for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Scanner moves and then moves back to start and turns my printer off.

    When turning on my printer, the scanner moves and then moves back to start and turns my printer off. I can not turn my printer back on unless I unplug it and plug it back in. Then it just does the same thing again and again and again.

    Hello @LuvInCayer , and welcome to the HP Forums!
    I see you're having power issues.  I would like to help!
    I'd recommend starting with a power reset.  Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I would also recommend plugging the printer power into a different wall outlet.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Final Cut Studio 2: Requirements and Recommendations

    Hello Final Cut Studio 2 Experts,
    I'm considering purchasing Final Cut Studi 2, and to make sure that I'll benefit from the full range of specific application (FCS/motion/color...) and I'd like to ask few questions (5 main points) regarding requirements and recommendations. So, please be prepared for much reading as I am not an expert on the matter. I like to know if my computer accepts any further hardware parts highly recommended and if I can purchase and install them myself. And yes, you should also know that I intend to use a Panasonic multi-format (HD/SD) camera for capturing and exporting videos.
    N.B. Please note that the full list of my Hardware contents appear at the bottom of this text.
    THANKS IN ADVANCE for your expert advise!
    So, here we go:
    Application-Specific Requirements
    Final Cut Studio
    Capturing HD resolution video using the ProRes 422 format requires a Mac Pro with an Intel Xeon processor or a G5 Quad computer and a qualified third-party capture card.
    1) Do I need an Intel Xeon processor? If yes, can I purchase and install the component by myself (like RAM)?
    Motion
    The standard graphics card in any Mac Pro, MacBook Pro, iMac with Intel Core Duo, Power Mac G5, or iMac G5; 1.25GHz or faster PowerBook G4; or 1.25GHz or faster flat-panel iMac:
    ATI Radeon 9800, 9700 Pro, 9600 XT, or 9600 Pro
    ATI Mobility Radeon 9700 or 9600
    NVIDIA GeForce 7600 GT, 7300 GT, 6600, 6600 LE, FX Go5200, or FX 5200 Ultra
    For 16- and 32-bit rendering: a graphics card with at least 128MB of VRAM
    2) Do I need one of the ATI Radeon 9800, 9700... or ATI Mobility Radeon? Why does my Hardware contents say ATI Radeon 9600, and not ATI Mobility Radeon 9600, is there a difference?
    Color
    The standard graphics card in any Mac Pro, 17-inch MacBook Pro, 24-inch iMac with Intel Core Duo, or 2.5GHz or faster Power Mac G5 Quad:
    ATI Mobility Radeon X1600
    ATI Radeon X1600
    NVIDIA GeForce 7800 GT, 7600 GT, 7300 GT, 6600, or Quadro FX 4500
    A display with 1680-by-1050 resolution or higher
    A three-button mouse for full functionality
    3) Do I need and ATI Mobility Radeon X1600 or ATI Radeon X1600?
    DVD Studio Pro
    For playback of DVD Studio Pro 4-authored HD DVDs: a Macintosh computer with a PowerPC G5 or Intel Core Duo processor
    For writing finished projects to disc: an Apple SuperDrive or other DVD recorder
    For writing finished projects to a double-layer disc: a double-layer-compatible recorder and double-layer media
    For transporting HD projects to a replicator: an external drive or Internet transfer of the project’s disk image
    For transporting SD projects that contain copy-protection or dual-layer features to a replicator: a DLT drive, external drive, or Internet transfer of the project’s disk image
    4) Do I have an Intel Core Duo processor? Do I need an Apple SuperDrive?
    What is a "replicator"?
    Application-Specific Recommendations
    Motion
    One of the following graphics cards is highly recommended:
    ATI Radeon X1900 XT, X850 XT, X800 XT, or X1600
    NVIDIA GeForce 7800 GT, 6800 Ultra DDL, 6800 GT DDL, or Quadro FX 4500
    For 32-bit rendering: a graphics card with 256MB of VRAM or more
    Color
    The following graphics card is highly recommended:
    ATI Radeon X1900 XT
    Dual displays with 1920-by-1200 or higher resolution
    5) Do I have one of the highly recommended cards ATI Radeon X1900 XT etc...? How do I get it and can I install it myself?
    My Power Mac G5 HARDWARE CONTENTS:
    Hardware Overview:
    Machine Name: Power Mac G5
    Machine Model: PowerMac7,3
    CPU Type: PowerPC G5 (3.0)
    Number Of CPUs: 2
    CPU Speed: 2.3 GHz
    L2 Cache (per CPU): 512 KB
    Memory: 4.5 GB
    Bus Speed: 1.15 GHz
    Boot ROM Version: 5.2.4f1
    Serial Number: G85167AGRU3
    ATA Bus:
    SONY DVD RW DW-Q28A:
    Model: SONY DVD RW DW-Q28A
    Revision: KAS7
    Serial Number:
    Detachable Drive: No
    Protocol: ATAPI
    Unit Number: 0
    Socket Type: Internal
    SONY DVD RW DW-Q28A:
    Model: SONY DVD RW DW-Q28A
    Revision: KAS7
    Serial Number:
    Detachable Drive: No
    Protocol: ATAPI
    Unit Number: 0
    Socket Type: Internal
    Built In Sound Card:
    Devices:
    Texas Instruments TAS3004:
    Inputs and Outputs:
    Line Level Input:
    Controls: Left, Right
    Playthrough: No
    PluginID: TAS
    Headphones:
    Controls: Mute, Left, Right
    PluginID: TAS
    Internal Speakers:
    Controls: Mute, Master
    PluginID: TAS
    Line Level Output:
    Controls: Mute, Left, Right
    PluginID: TAS
    Crystal Semiconductor CS84xx:
    Inputs and Outputs:
    S/PDIF Digital Input:
    Controls: Mute
    Playthrough: No
    PluginID: Topaz
    S/PDIF Digital Output:
    Controls: Mute
    PluginID: Topaz
    Formats:
    PCM 16:
    Bit Depth: 16
    Bit Width: 16
    Channels: 2
    Mixable: Yes
    Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
    PCM 24:
    Bit Depth: 24
    Bit Width: 32
    Channels: 2
    Mixable: Yes
    Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
    AC3 16:
    Bit Depth: 16
    Bit Width: 16
    Channels: 2
    Mixable: No
    Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
    Bluetooth: No Information Found.
    SONY DVD RW DW-Q28A:
    Firmware Revision: KAS7
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipped/Supported)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +RW, +R DL
    Burn Underrun Protection CD: Yes
    Burn Underrun Protection DVD: Yes
    Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
    Media: No
    Fibre Channel: No Information Found.
    FireWire Bus:
    Maximum Speed: Up to 800 Mb/sec
    ATI Radeon 9600:
    Chipset Model: ATY,RV351
    Type: Display
    Bus: AGP
    Slot: SLOT-1
    VRAM (Total): 128 MB
    Vendor: ATI (0x1002)
    Device ID: 0x4150
    Revision ID: 0x0000
    ROM Revision: 113-A58504-113
    Displays:
    Cinema HD Display:
    Display Type: LCD
    Resolution: 1920 x 1200
    Depth: 32-bit Color
    Core Image: Supported
    Main Display: Yes
    Mirror: Off
    Online: Yes
    Quartz Extreme: Supported
    Rotation: Supported
    Display:
    Status: No display connected
    DIMM0/J11:
    Size: 256 MB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM1/J12:
    Size: 256 MB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM2/J13:
    Size: 1 GB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM3/J14:
    Size: 1 GB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM4/J41:
    Size: 1 GB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM5/J42:
    Size: 1 GB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM6/J43:
    Size: Empty
    Type: Empty
    Speed: Empty
    Status: Empty
    DIMM7/J44:
    Size: Empty
    Type: Empty
    Speed: Empty
    Status: Empty
    PC Cards: No Information Found.
    PCI Cards: No Information Found.
    Parallel SCSI: No Information Found.
    System Power Settings:
    AC Power:
    System Sleep Timer (Minutes): 0
    Disk Sleep Timer (Minutes): 0
    Display Sleep Timer (Minutes): 0
    Dynamic Power Step: No
    Reduce Processor Speed: No
    Sleep On Power Button: Yes
    Automatic Restart On Power Loss: No
    Wake On AC Change: No
    Wake On LAN: No
    Wake On Modem Ring: No
    Adobe PDF 7.0:
    Status: Idle
    Print Server: Local
    Driver Version: 10.4
    Default: No
    URI: pdf700://distiller/
    PPD: Adobe PDF 3016.102
    PPD File Version: 1.0
    PostScript Version: (3016.102) 0
    hp LaserJet 1012:
    Status: Idle
    Print Server: Local
    Driver Version: 1.4.5
    Default: Yes
    URI: usb://Hewlett-Packard/hp LaserJet 1012?serial=00CNFB638356
    PPD: hp LaserJet 1012
    PPD File Version: 1.0
    PostScript Version: (3011.104) 0
    Serial-ATA Bus:
    Maxtor 6B250S0:
    Capacity: 233.76 GB
    Model: Maxtor 6B250S0
    Revision: BANC1E50
    Serial Number: B61QB0RH
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk1
    Protocol: ata
    Unit Number: 0
    Socket Type: Serial-ATA
    Bay Name: "A (upper)"
    OS9 Drivers: No
    S.M.A.R.T. status: Verified
    Volumes:
    Macintosh HD:
    Capacity: 233.64 GB
    Available: 50.02 GB
    Writable: Yes
    File System: Journaled HFS+
    BSD Name: disk1s3
    Mount Point: /
    Maxtor 6B250S0:
    Capacity: 233.76 GB
    Model: Maxtor 6B250S0
    Revision: BANC1E50
    Serial Number: B61QB0RH
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk1
    Protocol: ata
    Unit Number: 0
    Socket Type: Serial-ATA
    Bay Name: "A (upper)"
    OS9 Drivers: No
    S.M.A.R.T. status: Verified
    Volumes:
    Macintosh HD:
    Capacity: 233.64 GB
    Available: 50.02 GB
    Writable: Yes
    File System: Journaled HFS+
    BSD Name: disk1s3
    Mount Point: /
    Serial-ATA Bus:
    Maxtor 7L300S0:
    Capacity: 279.48 GB
    Model: Maxtor 7L300S0
    Revision: BANC1E00
    Serial Number: L602X73H
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk0
    Protocol: ata
    Unit Number: 0
    Socket Type: Serial-ATA
    Bay Name: "B (lower)"
    OS9 Drivers: No
    S.M.A.R.T. status: Verified
    Volumes:
    Primo Volume:
    Capacity: 279.36 GB
    Available: 154.23 GB
    Writable: Yes
    File System: HFS+
    BSD Name: disk0s3
    Mount Point: /Volumes/Primo Volume
    Maxtor 7L300S0:
    Capacity: 279.48 GB
    Model: Maxtor 7L300S0
    Revision: BANC1E00
    Serial Number: L602X73H
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk0
    Protocol: ata
    Unit Number: 0
    Socket Type: Serial-ATA
    Bay Name: "B (lower)"
    OS9 Drivers: No
    S.M.A.R.T. status: Verified
    Volumes:
    Primo Volume:
    Capacity: 279.36 GB
    Available: 154.23 GB
    Writable: Yes
    File System: HFS+
    BSD Name: disk0s3
    Mount Point: /Volumes/Primo Volume
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBOHCI
    PCI Device ID: 0x0035
    PCI Revision ID: 0x0043
    PCI Vendor ID: 0x1033
    Bus Number: 0x2b
    Hub in Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 500
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x1003
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Optical USB Mouse:
    Version: 3.40
    Bus Power (mA): 100
    Speed: Up to 1.5 Mb/sec
    Manufacturer: Logitech
    Product ID: 0x0307
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 250
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x020b
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Hub in Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 500
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x1003
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Optical USB Mouse:
    Version: 3.40
    Bus Power (mA): 100
    Speed: Up to 1.5 Mb/sec
    Manufacturer: Logitech
    Product ID: 0x0307
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 250
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x020b
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Optical USB Mouse:
    Version: 3.40
    Bus Power (mA): 100
    Speed: Up to 1.5 Mb/sec
    Manufacturer: Logitech
    Product ID: 0x0307
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 250
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x020b
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBOHCI
    PCI Device ID: 0x0035
    PCI Revision ID: 0x0043
    PCI Vendor ID: 0x1033
    Bus Number: 0x0b
    hp LaserJet 1012:
    Version: 1.00
    Bus Power (mA): 500
    Speed: Up to 12 Mb/sec
    Manufacturer: Hewlett-Packard
    Product ID: 0x0d17
    Serial Number: 00CNFB638356
    Vendor ID: 0x03f0
    hp LaserJet 1012:
    Version: 1.00
    Bus Power (mA): 500
    Speed: Up to 12 Mb/sec
    Manufacturer: Hewlett-Packard
    Product ID: 0x0d17
    Serial Number: 00CNFB638356
    Vendor ID: 0x03f0
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBOHCI
    PCI Device ID: 0x0040
    PCI Revision ID: 0x0001
    PCI Vendor ID: 0x106b
    Bus Number: 0x09
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBOHCI
    PCI Device ID: 0x0040
    PCI Revision ID: 0x0001
    PCI Vendor ID: 0x106b
    Bus Number: 0x08
    USB High-Speed Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBEHCI
    PCI Device ID: 0x00e0
    PCI Revision ID: 0x0004
    PCI Vendor ID: 0x1033
    Bus Number: 0x4b

    SORRY, BUT MY PREVIOUS POSTING DIDN'T HAVE THE FULL LIST OF HARDWARE CONTENTS of my Power Mac G5.
    Hello Final Cut Studio 2 Experts,
    I'm considering purchasing Final Cut Studi 2, and to make sure that I'll benefit from the full range of specific application (FCS/motion/color...) and I'd like to ask few questions (5 main points) regarding requirements and recommendations. So, please be prepared for much reading as I am not an expert on the matter. I like to know if my computer accepts any further hardware parts highly recommended and if I can purchase and install them myself. And yes, you should also know that I intend to use a Panasonic multi-format (HD/SD) camera for capturing and exporting videos.
    N.B. Please note that the full list of my Hardware contents appear at the bottom of this text.
    THANKS IN ADVANCE for your expert advise!
    So, here we go:
    Application-Specific Requirements
    Final Cut Studio
    Capturing HD resolution video using the ProRes 422 format requires a Mac Pro with an Intel Xeon processor or a G5 Quad computer and a qualified third-party capture card.
    1) Do I need an Intel Xeon processor? If yes, can I purchase and install the component by myself (like RAM)?
    Motion
    The standard graphics card in any Mac Pro, MacBook Pro, iMac with Intel Core Duo, Power Mac G5, or iMac G5; 1.25GHz or faster PowerBook G4; or 1.25GHz or faster flat-panel iMac:
    ATI Radeon 9800, 9700 Pro, 9600 XT, or 9600 Pro
    ATI Mobility Radeon 9700 or 9600
    NVIDIA GeForce 7600 GT, 7300 GT, 6600, 6600 LE, FX Go5200, or FX 5200 Ultra
    For 16- and 32-bit rendering: a graphics card with at least 128MB of VRAM
    2) Do I need one of the ATI Radeon 9800, 9700... or ATI Mobility Radeon? Why does my Hardware contents say ATI Radeon 9600, and not ATI Mobility Radeon 9600, is there a difference?
    Color
    The standard graphics card in any Mac Pro, 17-inch MacBook Pro, 24-inch iMac with Intel Core Duo, or 2.5GHz or faster Power Mac G5 Quad:
    ATI Mobility Radeon X1600
    ATI Radeon X1600
    NVIDIA GeForce 7800 GT, 7600 GT, 7300 GT, 6600, or Quadro FX 4500
    A display with 1680-by-1050 resolution or higher
    A three-button mouse for full functionality
    3) Do I need and ATI Mobility Radeon X1600 or ATI Radeon X1600?
    DVD Studio Pro
    For playback of DVD Studio Pro 4-authored HD DVDs: a Macintosh computer with a PowerPC G5 or Intel Core Duo processor
    For writing finished projects to disc: an Apple SuperDrive or other DVD recorder
    For writing finished projects to a double-layer disc: a double-layer-compatible recorder and double-layer media
    For transporting HD projects to a replicator: an external drive or Internet transfer of the project’s disk image
    For transporting SD projects that contain copy-protection or dual-layer features to a replicator: a DLT drive, external drive, or Internet transfer of the project’s disk image
    4) Do I have an Intel Core Duo processor? Do I need an Apple SuperDrive?
    What is a "replicator"?
    Application-Specific Recommendations
    Motion
    One of the following graphics cards is highly recommended:
    ATI Radeon X1900 XT, X850 XT, X800 XT, or X1600
    NVIDIA GeForce 7800 GT, 6800 Ultra DDL, 6800 GT DDL, or Quadro FX 4500
    For 32-bit rendering: a graphics card with 256MB of VRAM or more
    Color
    The following graphics card is highly recommended:
    ATI Radeon X1900 XT
    Dual displays with 1920-by-1200 or higher resolution
    5) Do I have one of the highly recommended cards ATI Radeon X1900 XT etc...? How do I get it and can I install it myself?
    My Power Mac G5 HARDWARE CONTENTS:
    Hardware Overview:
    Machine Name: Power Mac G5
    Machine Model: PowerMac7,3
    CPU Type: PowerPC G5 (3.0)
    Number Of CPUs: 2
    CPU Speed: 2.3 GHz
    L2 Cache (per CPU): 512 KB
    Memory: 4.5 GB
    Bus Speed: 1.15 GHz
    Boot ROM Version: 5.2.4f1
    Serial Number: G85167AGRU3
    ATA Bus:
    SONY DVD RW DW-Q28A:
    Model: SONY DVD RW DW-Q28A
    Revision: KAS7
    Serial Number:
    Detachable Drive: No
    Protocol: ATAPI
    Unit Number: 0
    Socket Type: Internal
    SONY DVD RW DW-Q28A:
    Model: SONY DVD RW DW-Q28A
    Revision: KAS7
    Serial Number:
    Detachable Drive: No
    Protocol: ATAPI
    Unit Number: 0
    Socket Type: Internal
    Built In Sound Card:
    Devices:
    Texas Instruments TAS3004:
    Inputs and Outputs:
    Line Level Input:
    Controls: Left, Right
    Playthrough: No
    PluginID: TAS
    Headphones:
    Controls: Mute, Left, Right
    PluginID: TAS
    Internal Speakers:
    Controls: Mute, Master
    PluginID: TAS
    Line Level Output:
    Controls: Mute, Left, Right
    PluginID: TAS
    Crystal Semiconductor CS84xx:
    Inputs and Outputs:
    S/PDIF Digital Input:
    Controls: Mute
    Playthrough: No
    PluginID: Topaz
    S/PDIF Digital Output:
    Controls: Mute
    PluginID: Topaz
    Formats:
    PCM 16:
    Bit Depth: 16
    Bit Width: 16
    Channels: 2
    Mixable: Yes
    Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
    PCM 24:
    Bit Depth: 24
    Bit Width: 32
    Channels: 2
    Mixable: Yes
    Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
    AC3 16:
    Bit Depth: 16
    Bit Width: 16
    Channels: 2
    Mixable: No
    Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
    Bluetooth: No Information Found.
    SONY DVD RW DW-Q28A:
    Firmware Revision: KAS7
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipped/Supported)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +RW, +R DL
    Burn Underrun Protection CD: Yes
    Burn Underrun Protection DVD: Yes
    Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
    Media: No
    Fibre Channel: No Information Found.
    FireWire Bus:
    Maximum Speed: Up to 800 Mb/sec
    ATI Radeon 9600:
    Chipset Model: ATY,RV351
    Type: Display
    Bus: AGP
    Slot: SLOT-1
    VRAM (Total): 128 MB
    Vendor: ATI (0x1002)
    Device ID: 0x4150
    Revision ID: 0x0000
    ROM Revision: 113-A58504-113
    Displays:
    Cinema HD Display:
    Display Type: LCD
    Resolution: 1920 x 1200
    Depth: 32-bit Color
    Core Image: Supported
    Main Display: Yes
    Mirror: Off
    Online: Yes
    Quartz Extreme: Supported
    Rotation: Supported
    Display:
    Status: No display connected
    DIMM0/J11:
    Size: 256 MB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM1/J12:
    Size: 256 MB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM2/J13:
    Size: 1 GB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM3/J14:
    Size: 1 GB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM4/J41:
    Size: 1 GB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM5/J42:
    Size: 1 GB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM6/J43:
    Size: Empty
    Type: Empty
    Speed: Empty
    Status: Empty
    DIMM7/J44:
    Size: Empty
    Type: Empty
    Speed: Empty
    Status: Empty
    PC Cards: No Information Found.
    PCI Cards: No Information Found.
    Parallel SCSI: No Information Found.
    System Power Settings:
    AC Power:
    System Sleep Timer (Minutes): 0
    Disk Sleep Timer (Minutes): 0
    Display Sleep Timer (Minutes): 0
    Dynamic Power Step: No
    Reduce Processor Speed: No
    Sleep On Power Button: Yes
    Automatic Restart On Power Loss: No
    Wake On AC Change: No
    Wake On LAN: No
    Wake On Modem Ring: No
    Adobe PDF 7.0:
    Status: Idle
    Print Server: Local
    Driver Version: 10.4
    Default: No
    URI: pdf700://distiller/
    PPD: Adobe PDF 3016.102
    PPD File Version: 1.0
    PostScript Version: (3016.102) 0
    hp LaserJet 1012:
    Status: Idle
    Print Server: Local
    Driver Version: 1.4.5
    Default: Yes
    URI: usb://Hewlett-Packard/hp LaserJet 1012?serial=00CNFB638356
    PPD: hp LaserJet 1012
    PPD File Version: 1.0
    PostScript Version: (3011.104) 0
    Serial-ATA Bus:
    Maxtor 6B250S0:
    Capacity: 233.76 GB
    Model: Maxtor 6B250S0
    Revision: BANC1E50
    Serial Number: B61QB0RH
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk1
    Protocol: ata
    Unit Number: 0
    Socket Type: Serial-ATA
    Bay Name: "A (upper)"
    OS9 Drivers: No
    S.M.A.R.T. status: Verified
    Volumes:
    Macintosh HD:
    Capacity: 233.64 GB
    Available: 50.02 GB
    Writable: Yes
    File System: Journaled HFS+
    BSD Name: disk1s3
    Mount Point: /
    Maxtor 6B250S0:
    Capacity: 233.76 GB
    Model: Maxtor 6B250S0
    Revision: BANC1E50
    Serial Number: B61QB0RH
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk1
    Protocol: ata
    Unit Number: 0
    Socket Type: Serial-ATA
    Bay Name: "A (upper)"
    OS9 Drivers: No
    S.M.A.R.T. status: Verified
    Volumes:
    Macintosh HD:
    Capacity: 233.64 GB
    Available: 50.02 GB
    Writable: Yes
    File System: Journaled HFS+
    BSD Name: disk1s3
    Mount Point: /
    Serial-ATA Bus:
    Maxtor 7L300S0:
    Capacity: 279.48 GB
    Model: Maxtor 7L300S0
    Revision: BANC1E00
    Serial Number: L602X73H
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk0
    Protocol: ata
    Unit Number: 0
    Socket Type: Serial-ATA
    Bay Name: "B (lower)"
    OS9 Drivers: No
    S.M.A.R.T. status: Verified
    Volumes:
    Primo Volume:
    Capacity: 279.36 GB
    Available: 154.23 GB
    Writable: Yes
    File System: HFS+
    BSD Name: disk0s3
    Mount Point: /Volumes/Primo Volume
    Maxtor 7L300S0:
    Capacity: 279.48 GB
    Model: Maxtor 7L300S0
    Revision: BANC1E00
    Serial Number: L602X73H
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk0
    Protocol: ata
    Unit Number: 0
    Socket Type: Serial-ATA
    Bay Name: "B (lower)"
    OS9 Drivers: No
    S.M.A.R.T. status: Verified
    Volumes:
    Primo Volume:
    Capacity: 279.36 GB
    Available: 154.23 GB
    Writable: Yes
    File System: HFS+
    BSD Name: disk0s3
    Mount Point: /Volumes/Primo Volume
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBOHCI
    PCI Device ID: 0x0035
    PCI Revision ID: 0x0043
    PCI Vendor ID: 0x1033
    Bus Number: 0x2b
    Hub in Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 500
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x1003
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Optical USB Mouse:
    Version: 3.40
    Bus Power (mA): 100
    Speed: Up to 1.5 Mb/sec
    Manufacturer: Logitech
    Product ID: 0x0307
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 250
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x020b
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Hub in Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 500
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x1003
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Optical USB Mouse:
    Version: 3.40
    Bus Power (mA): 100
    Speed: Up to 1.5 Mb/sec
    Manufacturer: Logitech
    Product ID: 0x0307
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 250
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x020b
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Optical USB Mouse:
    Version: 3.40
    Bus Power (mA): 100
    Speed: Up to 1.5 Mb/sec
    Manufacturer: Logitech
    Product ID: 0x0307
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 250
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x020b
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBOHCI
    PCI Device ID: 0x0035
    PCI Revision ID: 0x0043
    PCI Vendor ID: 0x1033
    Bus Number: 0x0b
    hp LaserJet 1012:
    Version: 1.00
    Bus Power (mA): 500
    Speed: Up to 12 Mb/sec
    Manufacturer: Hewlett-Packard
    Product ID: 0x0d17
    Serial Number: 00CNFB638356
    Vendor ID: 0x03f0
    hp LaserJet 1012:
    Version: 1.00
    Bus Power (mA): 500
    Speed: Up to 12 Mb/sec
    Manufacturer: Hewlett-Packard
    Product ID: 0x0d17
    Serial Number: 00CNFB638356
    Vendor ID: 0x03f0
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBOHCI
    PCI Device ID: 0x0040
    PCI Revision ID: 0x0001
    PCI Vendor ID: 0x106b
    Bus Number: 0x09
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBOHCI
    PCI Device ID: 0x0040
    PCI Revision ID: 0x0001
    PCI Vendor ID: 0x106b
    Bus Number: 0x08
    USB High-Speed Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBEHCI
    PCI Device ID: 0x00e0
    PCI Revision ID: 0x0004
    PCI Vendor ID: 0x1033
    Bus Number: 0x4b
    Message was edited by: Rinaldo

  • I have a MacBook Pro 5,4 running OSX 10.6.8 and Safari 5.1.10. A website i like has a known bug with 5.1.10 and recommends I install a newer version of Safari or use Firefox or Chrome. Just looking for advice on the best approach. Thanks!

    I have a MacBook Pro 5,4 running OSX 10.6.8 and Safari 5.1.10. A website i like has a known bug with 5.1.10 and recommends I install a newer version of Safari or use Firefox or Chrome. Just looking for advice on the best approach. Thanks!

    Unfortunately, Safari cannot be updated past 5.1.10 on a Mac running v10.6.8.
    So, the options are to upgrade to a newer OS X or use Firefox or  Chrome.
    Be aware, Apple no longer support Snow Leopard v10.6 >  www.ibtimes.com/apple-kills-snow-leopard-os-x-106-no-longer-receives-security-u pdates-1558393
    See if your Mac can run v10.9 Mavericks >  OS X Mavericks: System Requirements
    If so, you can download and install Mavericks for free from the App Store.
    Read prior to upgrading >   Upgrading to 10.7 and above, don't forget Rosetta! | Apple Support Communities

  • Can't load Netflix - Firefox says something about cookie problem and recommends try again button. ("The page isn't redirecting properly Firefox has detected tha

    Can't load Netflix - Firefox says something about cookie problem and recommends try again button. ("The page isn't redirecting properly Firefox has detected that the server is redirecting the request for this address in a way that will never complete. This problem can sometimes be caused by disabling or refusing to accept cookies.)" Hit the try again button repeated ly - nothing???

    I decided to give Netflix a call about this problem.
    On a recording while waiting for a support rep, it said if you're having problems logging in to go to:
    http://www.netflix.com/clearcookies
    It works for me. Now I have to logon everytime I go to their site though versus it had kept me already logged in before this problem.
    I will be using that link to get to their site until they get it fixed.

  • Link scanner agent and loader agent pop ups that won't go away

    Link scanner agent and loader agent pop ups won't go away.  How do I get them to stop?

    the same thing has been happening to me for a while, it doesnt seem to affect anything but i would like to get rid of it, i feel like it might be a bug.

  • Is SSD partitioning with boot camp stable and recommended?

    Is SSD partitioning with boot camp stable and recommended?

    The OS as already stated does not know the difference. The SSD will perform as it does with any operating system. SSDs can be partitioned as can HDDs.
    My Bootcamp partition is running exactly like it did on my HDD only faster. I have not experienced any issues with the Bootcamp partition or the SSD.

  • My Time Capsule is giving me a warning that  double NAT situation is occurring and recommends that I set it to bridge mode What is all this about please can it be explained in layman's terms and not martian thank you.

    My Time Capsule is giving me a warning that  double NAT situation is occurring and recommends that I set it to bridge mode What is all this about please can it be explained in layman's terms and not martian thank you.

    You have two devices....the Netgear and Time Capsule both configured to act as routers on the network. You only want one device providing this service.
    I suggest that you configure the Time Capsule in Bridge Mode as suggested to eliminate the Double NAT error. Unfortunately, the Guest Network cannot be enabled in this setting.
    No other adjustments are needed and everything else will operate normally...and the Time Capsule will still be providing your wireless network signal.
    Once the Time Capsule is configured in Bridge Mode, it would be an excellent idea to perform a complete power cycle on the network to allow things to reset properly.
    Just power off all devices on the network in any order that you want
    Wait a minute
    Start the Netgear device first, and let it run a minute by itself
    Start the Time Capsule next the same way
    Continue starting devices one at a time the same way until everything is powered backup
    The other option you have is to "ignore" the error and the light will turn green. The Double NAT error may...or may not cause some issues for you down the line. The next time that you update the Mac operating system, or update the firmware in the Time Capsule, it may likely change the Time Capsule to Bridge Mode automatically.
    If your Guest Network "disappears", you will know why this happened, and you will have to manually configure the Time Capsule again in Router Mode to provide DHCP and NAT services.
    Double NAT can also cause a slow down of web page loading. You may...or may not....notice this.

  • HT204135 I have a MacBook Air and bought a Canon MP495 printer scanner with WiFI. Since the Mac gas no disk drive and had to down load the printer, scanner drivers and a navigation and network software from Canon's website. How do I get the software to wo

    I have down loaded printer,scanner drivers and 2 applications Navigator and Network from Canon's website. I cannot seem to get these to run althought the printer works when connected to the Mac with a LAN cable Canon's documentation is useless because it relies on downloading a disc which you cannot do without a CD drive that MacBook Air does not have. Any suggestions appreciated.

    Hi John. Thanks for that input. At Step 6, after clicking "Next" I get a window telling me my OS version is unsupported and the installation may not complete. I am prompted to go to Canon's web site to "Check Latest Info".
    I've had this window on previous attempts and from Canon's web site I downloaded two drivers as follows
    - ICA Driver V4.0.0
    - Canon IJ Network Tool V4.5.0
    I'm not sure if these are the correct / complete drivers I need for this install or not.
    I continue to follow all the steps. At step 9 I click "Wireless Set Up using USB" amd get a License Agreement (a little different than instructions)
    I click "Agree" and it goes to a Setup window with two progress bars showing the installation. I've not been prompted to connect the USB?
    After the Setup window is done, I am then prompted to connect the printer via USB. I connect the printer and click on "Redetect". It is not detected.
    I then try following the Canon on screen instructions for connecting to the wireless LAN amd enter the password. It searches and indicates "Connecting" on the window, but it never connects and the blue light just blinks
    So, at this point I am stuck??
    Thanks
    Stephen

  • How to Render Collection and Recommendation Assets

    unable to render Collection and Recommendation Assets on the page. pls help.

    Hi,
    Have a look at the developer's guide, Chapter 39. Coding Engage Pages, Templates and Recommendations: http://docs.oracle.com/cd/E29495_01/doc.1111/webcenter_sites_11gr1_bp1_developer_guide.pdf
    You'll need to use something like
    <COMMERCECONTEXT.GETRECOMMENDATIONS
    COLLECTION=“recommendationname” [LIST=“inputlist” VALUE=“rating” MAXCOUNT=“assetcount”]
    LISTVARNAME="assetlist"/>
    or jsp equivalent, to get a list of child assets.
    There is sample code in the FirstSiteII sample site. Look for the FSIIDetail Template for AdvCols. (AdvCols is the table name for Recommendation assets.)
    I hope this helps.
    Kind regards,
    Stephan.

  • Wi-fi full coverage prictices and recommendations

    Hello All,
    can someone provide "best practises" and recommendations for wi-fi full coverage in a warehouse and in office.
    This is widespread topic nowadays, isn't it?
    For warehouse access points may be installed on pillar but behind and close to the pillar with omnidirectional antennas
    there will be no signal. Which antennas suit the best for this case?

    Get a wireless site survey done.  That's THE best practice.

  • HT5957 !I i updatedmode and recommends 'restore' but I would lose all data! Any suggestions? Apple helpline is not 'taking calls at this time'!

    I tried to update my iPad to iOS 7.0.2. and all I have now is screen asking to be connected to iTunes. Message tells me iPad is in 'recovery mode' and recommends 'restore' but that I would lose all data as this would restore factory settings. Any suggestions?
    Apple helpline is 'not taking calls at this time'!!!

    Your data is already gone.  Why did you not take regular backups of your data? Now you know why you should.

  • Difference between Maintenance update and recommended patches.

    Hello
    What is the difference between "Maintenance Update" and "Recommended patches" ?
    Can we install the OS from the distribution, then install the recommended patches and have a decent system. Or we do need to install the maintenance update before the recommended patches ?

    Hi,
    What do you mean of Manual Update.
    Simulation means , it will not upload into the data to the datatarget,It just explore you about how the system goes through update rules,Transfer rules .
    real upload/Update manually means the data will reach the datatarget and sits there with out explore you about how the system goes through update rules,Transfer rules .
    With rgds,
    Anil Kumar Sharma .P

Maybe you are looking for

  • Have Premiere Pro CC, Need Encore, Can't Get to Premiere Pro CS6

    I had CS6 subscription, upgraded to CC a while back. Until about a year ago, I hadn't downloaded Premiere Pro because I don't usually do that kind of video editing. Now I have a video project for my family (a lot of them elderly) that I finally compl

  • Satellite A100-234: Real Player recording sound not working

    Hi I have problem with my sound system. I have satellite A100-234. When i try to record from to sound recording it doesn't record.. plz plz plz help me if you can

  • Photo upload in infotype 2, or infotype header

    Can anyone tell me in detail how to upload photo of employee in infotype header and what all needs to be done in terms of basis also , archieve link or something.  I know oAAD but how does that linkage happen.

  • Error "Cannot join tables. Item dependency 'TatZ' not found in EUL"

    I have created a Discoverer Report in a development instance of Oracle. After I create the Data views and Item classes in my production instance (using the same names) I attempt to run the report. I then get the error stated in the subject and the re

  • Access 2010 error handling

    On a data input form I have a field "Job Number". I have a validation rule, >1000 and <9999. I have the form on-error set to the following code.  If DataErr = 3022 Then MsgBox "Duplicate Job Number" Response = acDataErrContinue End If The trap works