Scanner....Tiger....G4....slooowwww ?

Hi All,
I am running Tiger 10.4.6 on and older G4 and have a Minolta Dimage Elite 5400 II scanner that is having major problems with being super slow to scn. The exact same scanner is hooked up to a G5 next to the G4 and runs fine. The only thing I can think of is the G4 has USB 1.1 (I think) and the G5 USB 2.0....would that be enough to make the scanner on the G4 run THAT much slower. It takes about 40 minutes to run the same scan it takes 5 minutes to run on the G5. I have tried running the bare minimum on the G4 and saw no increase in speed...ie, pulled all other software off the machine in case of conflicts....and yes, I have rechecked over and over to make sure the scanner settings are the same as on the G5. Can I upgrade the G4 to USB 2.0?
Thanks,
Tammy
G5   Mac OS X (10.4.6)  

Hi,
To answer your questions:
1) I don't think that it's the USB unless the scanner is sending a whole lot of data to the computer. (I don't know the specs of the device.) USB 1.1 can handle up to 12 Mbps, which is less than 2 Mb/sec. So unless your scanner is sending tons of data (or you have a lot of other devices on the same USB port), it's not the USB.
2) Sure, you can upgrade your G4 to USB2. There are many plug-in cards you can buy that will do that. If you go to somewhere like Fry's, CompUSA, or Best Buy, you can often find Mac-compatible USB 2 cards. Look for companies like SIIG, Adaptec, and Belkin -- and make sure that the box says that it's Mac-compatible.
HTH,
~FifthWheel

Similar Messages

  • I have an older Microtek scanner that is only supported thru 10.4. Is there anyway to install Tiger on my external HDD that will be bootable by my new iMac? If not. anybody need a reliable scanner (Tiger users only).

    I have an older Microtek scanner that is only supported thru 10.4. Is there anyway to install Tiger on my external HDDthat can boot up my new iMac? If not, anybody need a good scanner (Tiger users only please).

    Hi Bill,
    Not possible to run Tiger on a new Mac at all.
    The good news is that VueScan supports many Mikrotek scanners & is free to try...
    http://www.hamrick.com/vuescan/vuescan.htm#microtek
    http://www.hamrick.com/

  • I installed Tiger and now my printer/scanner won't work

    Hi. I installed Tiger and now my multi function printer/scanner/fax is not recognized by my computer. I have the Brother MFC 420 CN. I downloaded some drivers and such which I thought would resolve the issue, but still it does not work. What can I do? Thank you.

    According to this page:
    http://www.brother.com/E-ftp/macosxstate.htm
    The MFC-420 CN is not listed. Sounds like you have a printer whose driver never was updated. Contact Brother technical support and ask them to fix that issue.

  • Mac Mini using OS X Tiger does not see my HP Scanjet 4670 scanner! HELP!!!!

    I have an HP Scanjet 4670 scanner which worked fine on my pervious mac which was an emac with OS X Panther.
    However, I now own a G4 Mac Mini running with OS X Tiger and recenly tried to use my scanner with it for the first time only to get the message: "scanner not found" I then went straight to my System Profiler to look at the USB Device Tree and was shocked to see that all my USB devices show up EXCEPT my scanner!
    Mechanically, the scanner appears fine (even when I run its 'Hardware Test') but no matter what I do I cant get the Mac to 'see' it. I have reinstalled the HP scanner software old AND new, but to no avail. Although, I'm sure that even with NO HP software on my Mac, the System Profiler should still be detecting a USB device on its tree.
    Just out of curiosty I connected my scanner to my old emac (my girlfriend has had it for a few months now) and it has the same problems there too!! WEIRD OR WHAT? The emac is STILL running on Panther - although during the months AFTER I gave it to my GF there has been some minor OSX Panther upgrades installed.
    Is it just coincidental bad luck that my scanner became faulty when I changed mac and operating systems? Or is there an OS X Tiger problem lurking somwhere here?
    PLEASE PLEASE can someone offer suggestions!!!!????? It is a lovely looking, decent scanner which was not cheap to buy and is only under 2 years old!!!

    Looks like you're using software for this scanner that was for Panther only.
    Try downloading HP's version of the scanner's software for Tiger.
    http://h10025.www1.hp.com/ewfrf/wc/softwareList?lc=en&cc=us&lang=en&dlc=en&produ ct=303641&os=219
    And run software update to make sure you're running the latest Tiger update.
    If you're already doing this, or it still doesn't work, it could be a damaged USB cable (as your girlfriend Panther system doesn't see it either).

  • Mac Mini using OS X Tiger does not see my HP Scanjet scanner!!!! HELP!!!!!!

    I have an HP Scanjet 4670 scanner which worked fine on my pervious mac which was an emac with OS X Panther.
    However, I now own a G4 Mac Mini running with OS X Tiger and recenly tried to use my scanner with it for the first time only to get the message: "scanner not found" I then went straight to my System Profiler to look at the USB Device Tree and was shocked to see that all my USB devices show up EXCEPT my scanner!
    Mechanically, the scanner appears fine (even when I run its 'Hardware Test') but no matter what I do I cant get the Mac to 'see' it. I have reinstalled the HP scanner software old AND new, but to no avail. Although, I'm sure that even with NO HP software on my Mac, the System Profiler should still be detecting a USB device on its tree.
    Just out of curiosty I connected my scanner to my old emac (my girlfriend has had it for a few months now) and it has the same problems there too!! WEIRD OR WHAT? The emac is STILL running on Panther - although during the months AFTER I gave it to my GF there has been some minor OSX Panther upgrades installed.
    Is it just coincidental bad luck that my scanner became faulty when I changed mac and operating systems? Or is there an OS X Tiger problem lurking somwhere here?
    PLEASE PLEASE can someone offer suggestions!!!!????? It is a lovely looking, decent scanner which was not cheap to buy and is only under 2 years old!!!

    Some basic questions:
    Did you install all of the software, I installed all of the sofrware for my Epson scanner before using it, I'm sure if I jump ahead, I'd be in trouble.
    USB Questions
    is it plugged into a usb hub? If so try connecting it directly to the computer.
    is the cable your using a usb2 cable? Your new Mac has usb2 ports not usb like the emac, and you'll run into issues using a regular run of the mill usb cable. I ran into a simiar issue with my Kodak 1400 printer, I needed to go out and purchase a usb2 cable.
    Mini G5 PowerMac G4 PowerBook Mac SE Mac OS X (10.4.6)

  • Epson scanner driver download compatible to OS Tiger

    I own a Power Mac G4 and an Epson Expression 1640XL scanner.
    I recently upgraded the OS to Tiger and realized afterward that Epson website doesn't offer a download of a driver that is compatible to Tiger. It supports up to OS 10.3.
    Does anybody have any suggestion as to what I should do next in order to make the scanner compatible to Tiger?
    FYI, I called Epson support but the recorded voice warned me that there will be a charge of a little over $9.00 to speak to a tech support so I decided to go this route.

    Kappy,
    Thanks for a prompt response.
    So I suppose it is safe to download TWAIN Driver and Epson Scan Utility v2.64A from their site even though it mentions that it is for OS X (v10.2.x - 10.3.x) and nothing above it.
    Let me try that and I'll get back to you.
    Thanks again!

  • 4 in 1 scanner  lexmark 2580 is it compatible mac os tiger

    I recently bought with a 4 in 1 scanner lexmark 2580. I was able to install it. but when I used it it wont save the document that I scanned. Im just a new mac os tiger user. I bought it second hand or used. So i dont if it compatible to mac os tiger or I just dont know how o save it in mac. Im used to windows. pls tell me what to do. if it compatible or should I returned it. thanks.

    Checking the lexmark web site I found this driver:
    http://downloads.lexmark.com/cgi-perl/downloads.cgi?ccs=229:1:0:593:0:0&searchLa ng=en&os_group=Mac%20OS%20X&target=
    Yes it is compatible. Choose the driver you need for your OS.

  • My Aztec 1236 USB scanner stumped Tiger.

    Hi. I bought an Aztec 1236 USB scanner used for five bucks. It came with nothing. I was lucky enough to find the model number. It's vintage but the price fit my post-buying-a-mac budget.
    I managed to dig up a Win XP driver for it w/ the accompanying photoshop bits (not a plugin, actually had an installer). The scanner works slow, but fine. But I want my PC free to do other things.
    But Tiger can't see it when I plug it in, let alone know what to do with it. I tried the Image Capture device browser TWAIN trick--and it ain't showing. I can't find a Mac OS X driver for it anywhere, not even w/ Google.
    Anybody know how I can save the hundred bucks and avoid buying a new scanner? Anybody found a Tiger driver for my classy, antique flatbed?

    I don't know where you get your information but Apple doesn't claim "it just works with everything." No computer can truly make that claim. Apple does, however, provide a list of known compatible devices. Consulting this available information would help you avoid making a mistake by purchasing incompatible hardware.
    It's up to the peripheral manufacturer to make compatible drivers. If your scanner doesn't work on a Mac then the problem is with its manufacturer not with Apple.
    You purchased a cheap used scanner without knowing in advance whether a driver would be available for the Mac. This is your oversight. Ranting at Apple (which, btw, is not appropriate here) is simply trying to shift the blame from where it really lies.

  • What I can do to make an older flat bed scanner work sucessfully with Tiger

    I have an older flat bed scanner with a Adaptec SCSI Card 2906 Driver on a G4 system currently running on 9.2.2 it is a twain scanner. Does anyone know if I can make this work with Tiger? The scanner software has not been updated since 9.0 but works fine with 9.2.2. Is there a solution available, or will it be just fine - any ideas? Thanks

    Here are AT&T's official requirements and procedure for unlocking an iPhone:
    https://www.att.com/deviceunlock/client/en_US/

  • Tiger and firewire Minolta 5400 scanner frustrations

    I recently upgraded one of the two internal drives of my 800MHz G4 desktop machine from 10.3.9 (which still resides on a second internal drive) to 10.4.2, then 10.4.4. Since I've been using Tiger, my Minolta 5400 is recognized and starts scanning or calibrating, but quits part way through the first scan or the calibration. This happens with either Minolta's software, including the latest driver, or Vuescan. However, everything works great, as it has for the last year, when I boot into 10.3.9.
    In addition to the two internal drives, I have an external firewire disk drive. This is connected to one of the firewire ports on the back of the Mac and the Minolta Scanner is connected to the other firewire port. I have discovered that scanning works perfectly when I "eject" (unmount) the external firewire drive. So, it seems that firewire isn't working properly with my hardware since the upgrade.
    Any ideas for a fix? Have changes been made in 10.4.6 to fix this problem? I'm reluctant to spend more time on this problem without some firm ideas that may work. I hate to dismount my external drive to scan as this disk is a nice storage location for photos.
    G4   Mac OS X (10.4.4)   Minolta 5400 firewire scanner and ext. fw disk

    I would configure as follows.
    USB2.0 (Port 1) - (powered) Belkin USB2.0 Hub - (Port 1) R200, (Port 2) R2400, (Port 3) Epson Scanner, (Port 4) Card reader,
    USB2.0 (Port 2) - Apple Keyboard and Mouse
    USB2.0 (Port 3) - Minolta Scanner
    Firewire (Port 1) - Lacie FW 250GB
    Firewire (Port 2) - Maxtor FW 300GB
    I feel like I'm missing the point as you don't seem to list enough devices to use more than one hub.
    mrtotes

  • Leopard not working with HP Scanner/Printer after upgrading from Tiger?

    Anyone had a similar issue: I can not longer scan things with my HP All in one since the upgrade to Leopard. Is this a coincidence or is there a problem I need to fix. Grateful for any helpful advise, Floor

    van D wrote:
    Anyone had a similar issue: I can not longer scan things with my HP All in one since the upgrade to Leopard. Is this a coincidence or is there a problem I need to fix. Grateful for any helpful advise, Floor
    Unfortunately HP is slow in updating software for Leopard compatibility. If you search this forum you will find some solutions for your problem.
    First, check HP's website for the latest software.
    I believe that uninstalling your current HP software and either reinstalling it or installing more recent software usually solves the problem.
    There was also an issue with Canon scanners.
    Here are a few links to look at:
    http://h10025.www1.hp.com/ewfrf/wc/genericDocument?docname=c01234231&cc=us&dlc=e n&lc=en&jumpid=regR1002USEN
    http://forums.macworld.com/message/605773
    http://forums.macosxhints.com/showthread.php?t=80579
    I personally gave up with HP a while ago, while still using PCs. I switched to Epson and both my Epson printers and my Epson scanner work fine with all my computers, PC and Mac. That was my solution.

  • Scanner and Printer Drivers Won't Work After Clean Tiger Reinstall

    Installed clean copy of 10.4 and 10.4.10 blanket update because iBook was slow and seemed encumbered with something I couldn't discern. Got drivers from the web and ran permissions repair as suggested in answer in another forum, but the problem remains. Printer is Epson C88 and scanner is 2450. They worked fine before the clean reload.????

    What is the full name of the printer ( Stylus, Color, etc.) and how is it connected?
    If USB, check that the ports are working, if not you will need to reset them by powering down everything, and do mean everything (disconnect all power, battery bricks, etc.) let it cool down then replace them. Then boot up from the install CD and run Disk Repair plus Repair Permissions.
    Also, what software are you using to scan? Have you tried Image Capture?
    Joe

  • Scanner drivers (HP Scanjet 2400 and 4100c) for mac tiger

    The above scanners always report massage 'No imaging devices...' even when connected.Please help
    How do I set my HP deskjet USB printer 840 to print on a network. Its connected to a mac and I have a PC running windows XP professional.

    Download VueScan from http://www.hamrick.com/ and try it.
    It help us save an older, expensive ($400), FireWire scanner from MicroTek.
    I think VueScan is awesome and so do many other people.

  • HP Photosmart C4480 - can't get the scanner to work on 10.6

    Hi
    I've seen other forum topics on this from a while back, and I'm following those directions, but still get errors. So, I've uninstalled any HP software with this printer/scanner, installed the HP drivers from Apple, yet still can't scan. I keep getting error messages when I use the scanner function from both the printer menu on preference settings and image capture. Any help would be appreciated.

    I think everyone with an HP Scanner or All-in-One should visit this HP Support Forum page and read a few of the posts. <http://h30434.www3.hp.com/t5/Mac-printing-and-scanning/Drivers-for-Mac-OS-10-6 /td-p/111357>.
    Clearly HP (and Epson - I have Epson equipment too) have decided to abandon their customers as they see that Apple has supplied basic Print and Scan support in Snow Leopard that goes further than ever before.
    What is particularly awful is that we all will have purchased, at some time, a Scanner or Printer from these people that came with bundled software - some of which, like Read Iris OCR was the reason for the purchase and none of that is supported any longer.
    What about the CD printing software for Epson's printers? We have just purchased a Photo R800, not a cheap printer and it came with Tiger drivers. There are no updates for SL.
    Message was edited by: philip howe
    Message was edited by: philip howe

  • PSE 11 editor has stopped importing from scanner, no longer permits drag and drop, will not permit cropping, and other bizarre issues

    Windows 8.1, PSE 11
    I am having a number of issues including loss of import functionality from scanner, I can't drag and drop photos into the editor any more as well, or at least not after the first one. The crop function stops working after the first couple of photos.  Then some freezing.  A little added crashing.  A plethora of other bizarre issues as well.  This just stated happening a couple of days ago. 
    What I have tried:
    Uninstall/Install. 
    Deleted preferences both before opening Editor (crontrol-alt-delete) and after opening it. 
    Kindly advise.  Thanks!
    Adobe Photoshop Elements Version: 11.0 (11.0 (20120830.r.32025)) x32
    Operating System: Windows 8 64-bit
    Version: 6.2
    System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
    Physical processor count: 8
    Processor speed: 3500 MHz
    Built-in memory: 8139 MB
    Free memory: 5185 MB
    Memory available to Photoshop Elements: 3255 MB
    Memory used by Photoshop Elements: 70 %
    Image tile size: 128K
    Image cache levels: 6
    Display: 1
    Display Bounds:=  top: 0, left: 0, bottom: 1440, right: 2560
    Video Card Number: 1
    Video Card: NVIDIA GeForce GTX 660 Ti
    Driver Version: 9.18.13.3750
    Driver Date: 20140327000000.000000-000
    Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
    Video Mode: 2560 x 1440 x 4294967296 colors
    Video Card Caption: NVIDIA GeForce GTX 660 Ti
    Video Card Memory: -2047 MB
    Application folder: C:\Program Files (x86)\Adobe\Photoshop Elements 11\
    Temporary file path: C:\Users\evan\AppData\Local\Temp\
    Photoshop Elements scratch has async I/O enabled
    Scratch volume(s):
      Startup, 931.2G, 805.4G free
    Required Plug-ins folder: C:\Program Files (x86)\Adobe\Photoshop Elements 11\Required\
    Primary Plug-ins folder: C:\Program Files (x86)\Adobe\Photoshop Elements 11\Plug-Ins\
    Additional Plug-ins folder: not set
    Installed components:
       ACE.dll   ACE 2011/03/29-16:11:44   63.457850   63.457850
       adbeape.dll   Adobe APE 2011/01/17-12:03:36   64.452786   64.452786
       AdobeLinguistic.dll   Adobe Linguisitc Library   5.0.0  
       AdobeOwl.dll   Adobe Owl 2012/06/20-18:39:56   4.1.9   78.509892
       AdobeOwlCanvas.dll   Adobe Owl Canvas   3.0.68   61.2954
       AdobePDFL.dll   PDFL 2011/03/29-16:11:44   63.378681   63.378681
       AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1654  
       AdobeXMP.dll   Adobe XMP Core 2010/10/12-08:45:30   63.139439   63.139439
       AdobeXMPFiles.dll   Adobe XMP Files   5.0   61.134777
       adobe_caps.dll   Adobe CAPS   4,0,42,0  
       Adobe_OOBE_Launcher.dll   Adobe OOBE Launcher   2.2.0.4 (BuildVersion: 2.2; BuildDate: Wed Apr 27 2011 21:49:00)   1.000000
       AGM.dll   AGM 2011/03/29-16:11:44   63.457850   63.457850
       ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56  
       aif_core.dll   AIF   3.0   1.486530
       aif_ogl.dll   AIF   3.0   1.486530
       amtlib.dll   AMTLib   4.2.0.4 (BuildVersion: 4.2; BuildDate: Wed Apr 27 2011 21:49:00)   1.000000
       amtservices.dll   AMTServices   4.2.0.4 (BuildVersion: 4.2; BuildDate: Wed Apr 27 2011 21:49:00)   1.000000
       ARE.dll   ARE 2011/03/29-16:11:44   63.457850   63.457850
       asneu.dll    AsnEndUser Dynamic Link Library   1, 7, 0, 1  
       AXE8SharedExpat.dll   AXE8SharedExpat   3.3   49.279053
       AXEDOMCore.dll   AXEDOMCore   3.3   49.279053
       AXSLE.dll   AXSLE   3.3   49.279053
       Bib.dll   BIB 2011/03/29-16:11:44   63.457850   63.457850
       BIBUtils.dll   BIBUtils 2011/03/29-16:11:44   63.457850   63.457850
       boost_threads.dll   DVA Product   5.0.0  
       cg.dll   NVIDIA Cg Runtime   2.0.0015  
       cgGL.dll   NVIDIA Cg Runtime   2.0.0015  
       CoolType.dll   CoolType 2011/03/29-16:11:44   63.457850   63.457850
       data_flow.dll   AIF   3.0   1.486530
       dvaadameve.dll   DVA Product   5.0.0  
       dvacore.dll   DVA Product   5.0.0  
       dvaui.dll   DVA Product   5.0.0  
       ems.dll   Elements Organizer   11.0  
       ExtendScript.dll   ExtendScript 2010/03/05-08:21:15   61.423205   61.423205
       FaceDetector.dll   FaceDetector 0000/00/00-00:00:00   2.0.1.1   2.0.1.1
       FileInfo.dll   Adobe XMP FileInfo   5.0   61.134777
       filter_graph.dll   AIF   3.0   1.486530
       hydra_filters.dll   AIF   3.0   1.486530
       icucnv36.dll   International Components for Unicode 2009/06/17-13:21:03    Build gtlib_main.9896  
       icudt36.dll   International Components for Unicode 2009/06/17-13:21:03    Build gtlib_main.9896  
       image_compiler.dll   AIF   3.0   1.486530
       image_flow.dll   AIF   3.0   1.486530
       image_runtime.dll   AIF   3.0   1.486530
       JP2KLib.dll   JP2KLib 2011/03/29-16:11:44   63.196876   63.196876
       libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)  
       libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0  
       LogSession.dll   LogSession   2.1.2.1640  
       MPS.dll   MPS 2011/05/24-09:45:42   63.464027   63.464027
       MSVCP100.dll   Microsoft® Visual Studio® 2010   10.00.30319.1  
       MSVCP71.dll   Microsoft® Visual Studio .NET   7.10.3077.0  
       MSVCR100.dll   Microsoft® Visual Studio® 2010   10.00.30319.1  
       MSVCR71.dll   Microsoft® Visual Studio .NET   7.10.3052.4  
       pdfsettings.dll   Adobe PDFSettings   1.04  
       Photoshop.dll   Adobe Photoshop Elements Editor   11.0  
       platform.DLL   Adobe Help System   1, 0, 0, 1  
       Plugin.dll   Adobe Photoshop Elements Editor   11.0  
       PSArt.dll   Adobe Photoshop Elements Editor   11.0  
       PSViews.dll   Adobe Photoshop Elements Editor   11.0  
       ScCore.dll   ScCore 2010/03/05-08:21:15   61.423205   61.423205
       shfolder.dll   Microsoft(R) Windows (R) 2000 Operating System   5.50.4027.300  
       Tbb.dll   Intel(R) Threading Building Blocks for Windows   2, 2, 2009, 1011  
       updaternotifications.dll   Adobe Updater Notifications Library   2.0.0.15 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   2.0.0.15
       WRServices.dll   WRServices Thursday January 21 2010 12:13:3   Build 0.11423   0.11423
    Required plug-ins:
       Accented Edges 12.0
       ADM 3.11x01
       Angled Strokes 12.0
       Auto Divide 11.0.0.0 (11.0 (20120830.r.32025))
       Average 12.0.2
       Bas Relief 12.0
       BMP 12.0.2
       Camera Raw 7.4
       Chalk & Charcoal 12.0
       Charcoal 12.0
       Chrome 12.0
       Clouds 12.0.2
       Color Halftone 12.0.2
       Color Variations 12.0.4 (12.0.4x001)
       Colored Pencil 12.0
       Comic NO VERSION
       CompuServe GIF 12.0.2
       Conté Crayon 12.0
       Correct Camera Distortion 12.0.2
       Craquelure 12.0
       Crop and Straighten Photos Filter 12.0.2
       Crosshatch 12.0
       Crystallize 12.0.2
       Cutout 12.0
       Dark Strokes 12.0
       Difference Clouds 12.0.2
       Diffuse Glow 12.0
       Displace 12.0.2
       Dry Brush 12.0
       Extrude 12.0.2
       FastCore Routines 12.0.4 (12.0.4x001)
       Fibers 12.0.2
       Film Grain 12.0
       Filter Gallery 12.0
       Fresco 12.0
       Glass 12.0
       Glowing Edges 12.0
       Grain 12.0
       Graphic Novel NO VERSION
       Graphic Pen 12.0
       Halftone Pattern 12.0
       Ink Outlines 12.0
       Lens Blur 12.0
       Lens Flare 12.0.2
       Lighting Effects 12.0.4 (12.0.4x001)
       Liquify 12.0.1
       Matlab Operation 12.0.4 (12.0.4x001)
       Mezzotint 12.0.2
       MMXCore Routines 12.0.4 (12.0.4x001)
       Mosaic Tiles 12.0
       Multiprocessor Support 12.0.4 (12.0.4x001)
       Neon Glow 12.0
       Note Paper 12.0
       Ocean Ripple 12.0
       OnEdge 1, 0, 0, 1
       Paint Daubs 12.0
       Palette Knife 12.0
       Patchwork 12.0
       Pen and Ink NO VERSION
       Photocopy 12.0
       Picture Package Filter 12.0.4 (12.0.4x001)
       Pinch 12.0.2
       Pixar 12.0.4 (12.0.4x001)
       Plaster 12.0
       Plastic Wrap 12.0
       PNG 12.0.2
       Pointillize 12.0.2
       Polar Coordinates 12.0.2
       Polar Coordinates 12.0.4 (12.0.4x001)
       Poster Edges 12.0
       Radial Blur 12.0.2
       Read Watermark 4.0
       Reticulation 12.0
       Ripple 12.0.2
       Rough Pastels 12.0
       Save for Web & Devices 12.0
       ScriptingSupport 12.0.4
       Shear 12.0.2
       Smart Blur 12.0.2
       Smudge Stick 12.0
       Solarize 12.0.2
       Spatter 12.0
       Spherize 12.0.2
       Sponge 12.0
       Sprayed Strokes 12.0
       Stained Glass 12.0
       Stamp 12.0
       Straighten and Crop Image 12.0.4 (12.0.4x001)
       Straighten Image 12.0.4 (12.0.4x001)
       Sumi-e 12.0
       Texture Fill 12.0.4 (12.0.4x001)
       TextureSelect 12.0.4 (12.0.4x001)
       Texturizer 12.0
       Tiles 12.0.2
       Torn Edges 12.0
       Twirl 12.0.2
       Underpainting 12.0
       Water Paper 12.0
       Watercolor 12.0
       Wave 12.0.2
       WIA Support 12.0.4 (12.0.4x001)
       Wind 12.0.2
       ZigZag 12.0.2
    Optional and third party plug-ins:
       Frame From Video 6.0
       Magic Extractor 12.0.4 (12.0.4x001)
       PhotomergeUI 12.0.4 (12.0.4x001)
    Plug-ins that failed to load: NONE
    Installed TWAIN devices: NONE

    Final Update: ...god willing...
    OK! Check it, like I said in previous posts I seemed to have narrowed it down to specific mp3s not converting and playing in their native sample rate which if paired with another sample would give you the "audio midi sync" error and basically screw up your clock! It appears mp3 files converting to mp3 using iTunes would not convert to the correct sample rate if set to something other than 44 in logic and cause this. A tad peculiar Apple iTunes won't work with Apple Logic. I was able to confirm this on two mac's via my friend in Florida. He's running Tiger and tried the same experiment and Booya! Mickey Mouse! It appears this insane week long adventure has came to an end (...god willing) with a super specific unlucky shot in the dark on my part finally revealed to be an perfectly normal function of Logic (obviously one i'm not fond of..) As far as the errors / crashes / system overloads / kernal panics I think I can sort those out to the mackie onyx satellite not being a good choice and trying to add and remove firewire devices in the middle of the sample rate mayhem. Wow! all I can say is, I'm glad it's over
    Wish me a lot of luck in the future.. I'm sure i'll need it!

Maybe you are looking for

  • I am having a major problem with iMessage-

    Since upgrading to 7.02 about half my texts don't go out even with a robust wireless or LTE signal. I have checked the 'send as SMS' but in some cases the messages will simply lock up and not go no matter what. Happens almost all the time now- and en

  • Need help with moving sight over to Iweb

    I would like to start using IWeb but I already have a website built that I used Frontpage to create. I want to make some changes to the sight so if I cannot convert some of the things I have, Im ok with adapting! www.DarnGoodSeasoning.com 1st questio

  • Skype needs repairing but not available to repair

    Whilst in a video chat earlier this evening, I encountered a problem with Skype, the video call itself crashed but made a funny interference noise. I then clicked off the app and couldn't return to the app because I had a notice saying this app neede

  • Google Maps App??? On a Printer?

    The new Photosmart printers by HP are taking the web concept to a new level. The idea is to take a regular HP All-In-One printer and add internet connectivity in the form of a browser. When I first heard about the idea, I could not figure out the use

  • PC Won't register - Iphone

    Just got 2nd hand Iphone (4S) Tried to synch, message says my PC is not registered, followed instructions to register, message says already registered. Tried to delete all computors and start again, message say no compurters registered aaaaaagggghhh!