Scanners Aren't Just for Barcodes
fi yuo cna raed tihs, yuo hvae a sgtrane mnid too. Cna yuo raed tihs? It dseno't mtaetr in waht oerdr the ltteres in a wrod are, the olny iproamtnt tihng is taht the frsit and lsat ltteer be in the rghit pclae.
Just like our mind, a scanner can read data in strange ways. Whether it is obscure lines and spaces or what appears to be bizarre squares randomly assembled. The scanner is not just for barcodes. It can read characters and decode them properly so as to make the unreadable readable. Intermec Imaging Solutions take advantage of this Optical Character Recognition capability to provide the ability to read checks, license plates, shipping container serial numbers, addresses, labels … or whatever your mind can imagine. Break out of barcode jail and run free with Imaging Solutions.
Read on for more ...
at the beginning ,it seems like another laguage i do not know,but when i read it i find i can read! this is so interesting! but which strange barcode scanner you said above, how does it become strange
Similar Messages
-
MIGO / MB01 - Barcode scenario for archiving just for certain plants
Dear Experts,
I'm trying to activate the barcode scenario for archiving delivery notes when posting a goods receipt. We are working with several plants but the barcode scenario should be activated just for certain plants .
Does anyone have an idea how I can use barcode scenario for certain plants?
Thanks in advance!
Petra HönnemannHi Petra,
not sure, if your question already had been answered. But if not, I think what you need is to create documenttypes for each plant. Also create different Contenet Reps and link them to the corresponding documenttype. In TA OAC5 you can activate the barcode scenario for each plant.
Regards,
Lu -
Yesterday I ran Disk Utility and came up with hundreds of permissions that needed repair. I hit the "repair permissions" button and waited until it said they were repaired, but just for fun I hit the "verify permissions" button again, and they all came back! I did this several more times and every time I would hit "verify permissions" I would get the same list. What's up? I've always suspected diagnostic programs, but this is Apple's own!
Ignore them. They aren't errors. You will keep seeing the same ones. As long as you get the message "Permissions repair complete," you're OK.
http://support.apple.com/kb/TS1448?viewlocale=en_US -
I have posted two problems I am having on my iPad and I posted them sometime back. One how copy paste aren't working and how my microphone will not transcribe when I use it for email. Yet even though these were both posted months ago I still have no resolution. So i guess this is just for us to complain about our problems and sometime some one posts an idea, but they don't work. So Apple never offers us or helps us with these problems? Just trying to see if this is worth using as I thought Apple helped us!
For the copy/paste issue ...
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
No data is lost due to a reset.
Which transcription app are you using with your microphone? -
My PC hard drive died and I have replaced it. Need to import the music on my classic iPod, but get a message that it's synced with another library (old hard drive). How do I import the music onto the new hard drive? Senuti (one respondent's suggestion) is just for macs. I have no old hard drive to copy to the new hard drive (another respondent's suggestion.)
See this older thread from another forum member Zevoneer on different ways to copy music from your iPod back to your PC.
https://discussions.apple.com/thread/2417169?start=0&tstart=0
B-rock -
I am no musician, but have owned an iMac now for around four years. During that time I have had Garageband installed. I have dipped in and out very occasionally as I would like nothing more than to be able to get my head around it just for my own amusement really. I would at least like to be able to record my electric guitar with loops and tracks etc, just try to be a bit creative and see what comes out. The problem that I have is that perhaps its me, but every time I try to get to grips with this software, I just can't seem to get my head around it, even to begin to do something. I have now recently downloaded 10.0.2 which is confusing in itself, as, as far as I can ascertain that is actually version 11, but I'm not even sure about that. I have also recently purchased a Rocksmith RealTone Cable to connect my guitar. I can sometimes get a sound come out, but nothing to brilliant. And every time I try to set something up, it just doesn't seem to work out. I end up hitting buttons and controls in the simple hope that I may hit the correct control in order to get some sort of result. But I'm kind of fumbling in the dark with this. I have trawled the Internet just trying to find either a good manual or video tutorials for absolute beginners, but there just simply doesn't seem to be anything of that nature out there and what there is appears always to be very sketchy and not particularly detailed in explaining anything properly, and so I always find myself seemingly jumping in with both feet and just struggling to try and find a foothold with this on how to really begin. It is so frustrating as I can see the fantastic potential of this software, but just can't understand how to use it properly. If there is anyone out there who may be able to offer me some advice with this, I would be most grateful indeed... Many Thanks.
I have now recently downloaded 10.0.2 which is confusing in itself, as, as far as I can ascertain that is actually version 11, but I'm not even sure about that.
Version 10.0.2 is the newest version and the successor to GarageBand '11 (version 6.0.5).
The '11 is referring to the iLife '11 suit of multimedia application - the older GarageBand was a part of this bundle.
Have a look at Edgar's graphical enhanced manuals, the explain very detailed how things work and why. You can buy them as iBooks from the iBook store or directly from the page:
http://DingDingMusic.com/Manuals/ -
Lenovo 3000 N100 - Stays on just for a very short time
I have a Lenovo 3000 N100, Model Type 0689-29U
Will power up but only stay on for a short time (less than two minutes usually) before it shuts down without any errors. Does not stay on long enough to run hardware diagnostics.
Have replaced the following items so far:
1) Main System Board (motherboard)
2) Both Memory Modules
3) Power Adapter (power brick)
4) Hard Drive
5) Battery
Still the same results. I am not thinking that the CPU may be either bad and/or it is heating up. I am not sure how the fan on this unit is supposed to behave. In other words, I am not sure if it is supposed to be on all the time or not. When I first power the system up, the fan comes on just for a few seconds then goes off and never comes back on again. I assume that is because this unit's fan is supposed to come on only when needed although not sure.
If anyone has any ideas and/or any feedback on anything I have written above, I would greatly appreciate your input.
Thank you.remove the battery and plug the ac power, and check if issue persists.
-
Hey guys! I want to connect my Imac 21 " with my Tv just for fun. Does anyone know , how it works?
Selecting the correct adapter and cable depends on which year model iMac you have and what inputs the TV has?
Check the User's Guide that came with your iMac or your Spec's at > Apple - Support - Technical Specifications
to see if your iMac has a Mini-DVI or Mini DisplayPort and then select that adapter with the correct connection for the TV.
Example: if you have a 2010 or 2011 iMac and an HDMI ready TV, then you would want the > Moshi Mini DP to HDMI Adapter with Audio Support - Apple Store (U.S.) -
When loading a page with many hires images, Firefox becomes really slow and scrolling becomes jumpy then eventually becomes completely unresponsive. Unusual high memory usage of up to 2gigs just for firefox when loading these pages. This was never a problem with v3.6.
I encountered the same type of problem. Firefox running terribly slowly and slowing down my entire machine (Core i5 with 256GB SSD). Searching the forums, I found a couple of things about troubleshooting performance issues, one of which was to use '''hardware acceleration''', that is on by default. It was turned on on my PC, '''so I tried deactivating it, and it worked!'''
So doing the exact opposite as Mozilla support said solved the problem. It is really a pain now to work with Firefox. I'm using it because I have no choice, but I'd recommend IE and Chrome over Firefox... Whatever, the market will decide once Firefox has become to crappy... -
How to put text line just for a moment ?
Hi,
Do you know how to put a text line just for one photo? I mean I have more photos in one portfolio but i need the text line to be seen just for one photo for the others no.
Thank you in advance.You can use composition for this , where you can insert text frame for that specific photo where you want to add some description and for rest dont use text frame.
Thanks,
Sanjit -
I think the title says it all. We have different Apple IDs on two computers for two users. To home share, is it necessary to change one of the Apple IDs to match the other, or can this be done just for purposes of home sharing -- i.e., select one Apple ID as the common ID just for purposes of home sharing.
Thanks,
EricPersonally, I'd keep it simple and keep the same one.
-
Imprumut = loan
I have 6 tables:
I have one combobox(from where I select utilizatori(users)) and 2 CheckedListBox(Between first box and second box I have 2 buttons:imprumuta(loan) and restituie(return))
This c# code works just for first user: Utilizator, but something's not good. When I add new utilizator(user) and select it, the loan will be add in my SQL DataBase, but... the book who I selected doesn't move to the right in CheckedListBox and the reason
is that I can't make an return
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Windows.Forms;
using MySql.Data.MySqlClient;
namespace proiect
public partial class Imprumut : Form
MySqlConnection con = new MySqlConnection("DataSource=localhost;UserID=root;database=biblio1");
//stabilim conexiunea
MySqlCommand comUser;//interogarea pe baza careia umplem comboBox
MySqlDataAdapter adaptu;
DataTable userT = new DataTable();
MySqlCommand cmdCarti;//interogarea pe baza careia umplem checkListBox
MySqlDataAdapter adaptCarti;
DataTable CartiTabel = new DataTable();
MySqlCommand cmdCartiImprumutate;//interogarea pe baza careia umplem checkListBox
MySqlDataAdapter adaptCartiImprumutate;
DataTable CartiImprumutateTabel = new DataTable();
public int UserId
get
return Convert.ToInt32(user.SelectedValue.ToString());
void Completez_Combo_User()
try
comUser = new MySqlCommand("SELECT n.userid, CONCAT(n.UserName) as UserN FROM users n left join userroles us on n.userid=us.userid left join roles r on r.roleid=us.roleid WHERE r.roleid='3'",
con);
adaptu = new MySqlDataAdapter(comUser);
adaptu.Fill(userT);
user.Items.Clear();
user.DataSource = userT;
//DataTable din care sunt preluate datele pentru ComboBox user
user.ValueMember = "UserID";
//Valoarea din coloana UserID nu se afiseaza in combobox
user.DisplayMember = "UserN";
//Eelementele afisate in combobox, preluate din concatenarea mai multor coloane
catch (Exception ex)
MessageBox.Show(ex.Message);
void Completez_CheckList_Carti()
try
cmdCarti = new MySqlCommand("SELECT BookID, CONCAT(title, ' ', ISBN,' ',author)as date_carte FROM books WHERE NumberLeft > 0 ORDER BY BookID", con);
adaptCarti = new MySqlDataAdapter(cmdCarti);
adaptCarti.Fill(CartiTabel);
imp.Items.Clear();
//carti.DataSource=null;
imp.DataSource = CartiTabel;
//DataTable din care sunt preluate datele pentru ComboBox carte
imp.ValueMember = "BookID";
//Valoarea din coloana BookID nu se afiseaza in combobox
imp.DisplayMember = "date_carte";
//Eelementele afisate in combobox, preluate din concatenarea mai multor coloane
catch (Exception ex)
MessageBox.Show(ex.Message);
void Completez_CheckList_Cartires()
try
cmdCartiImprumutate = new MySqlCommand(string.Format("SELECT b.BookID, CONCAT(title, ' ', ISBN,' ',author) as date_carte FROM books b inner join userbooks ub on ub.bookid = b.bookid
WHERE ub.userid = {0} ORDER BY BookID", UserId), con);
adaptCartiImprumutate = new MySqlDataAdapter(cmdCartiImprumutate);
adaptCartiImprumutate.Fill(CartiImprumutateTabel);
res.Items.Clear();
//carti.DataSource=null;
res.DataSource = CartiImprumutateTabel;
//DataTable din care sunt preluate datele pentru ComboBox carte
res.ValueMember = "BookID";
//Valoarea din coloana BookID nu se afiseaza in combobox
res.DisplayMember = "date_carte";
//Eelementele afisate in combobox, preluate din concatenarea mai multor coloane
catch (Exception ex)
MessageBox.Show(ex.Message);
void Inregistrez_imprumut_in_BD()
int useridu = Convert.ToInt32(user.SelectedValue.ToString()); //useridu = id book
int bookidi;
try
DateTime azi = System.DateTime.Now; // Data imprumutului
DateTime atunci = termenul.Value; // Data restituirii
MySqlTransaction tranzactie = con.BeginTransaction();
MySqlCommand adaugImpr = new MySqlCommand("INSERT INTO bookshistory(UserID, BookID,BorrowDate) VALUES(@UserID, @BookID, CAST(@BorrowDate as datetime))", con);
MySqlCommand scadCarti = new MySqlCommand("UPDATE books SET numberleft=numberleft-1 WHERE bookid=@bookid", con);
MySqlCommand adauga_userbooks = new MySqlCommand("INSERT INTO userbooks(userId,bookID)VALUES(@userID,@bookID)", con);
adauga_userbooks.Transaction = tranzactie;
adaugImpr.Transaction = tranzactie;
scadCarti.Transaction = tranzactie;
try
foreach (int i in imp.CheckedIndices)
imp.SelectedIndex = i;
bookidi = Convert.ToInt32(imp.SelectedValue.ToString());
MessageBox.Show(bookidi.ToString());
//bookidi va fi id-ul cartea bifata, pe rand din checklistBox
//Inregistrez in tabela imprumut
adaugImpr.Parameters.AddWithValue("@UserID", useridu);
adaugImpr.Parameters.AddWithValue("@BookID", bookidi);
adaugImpr.Parameters.AddWithValue("@BorrowDate", azi);
adaugImpr.ExecuteNonQuery();
adaugImpr.Parameters.Clear();
adauga_userbooks.Parameters.AddWithValue("@userID", useridu);
adauga_userbooks.Parameters.AddWithValue("@bookID", bookidi);
adauga_userbooks.ExecuteNonQuery();
adauga_userbooks.Parameters.Clear();
//Scad numarl de carti disponibile pentru cartea imprumutat
scadCarti.Parameters.AddWithValue("@bookid", bookidi);
scadCarti.ExecuteNonQuery();
scadCarti.Parameters.Clear();
tranzactie.Commit();
catch (Exception ex)
tranzactie.Rollback();
string message = ex.Message;
if (ex.Message.ToLower().Contains("duplicate entry"))
message = "Una dintre carti mai exista deja";
MessageBox.Show(message);
catch (Exception ex)
MessageBox.Show(ex.Message);
void Inregistrez_restituire_in_BD()
int useridu = Convert.ToInt32(user.SelectedValue.ToString()); //useridu = id book
int bookidi;
try
DateTime azi = System.DateTime.Now; // Data imprumutului
DateTime atunci = termenul.Value; // Data restituirii
MySqlTransaction tranzactie = con.BeginTransaction();
MySqlCommand modificIstoric = new MySqlCommand("UPDATE bookshistory SET returndate = @returnDate WHERE userID = @userID AND bookID = @bookID", con);
MySqlCommand adaugCarti = new MySqlCommand("UPDATE books SET numberleft = numberleft + 1 WHERE bookID = @bookID", con);
MySqlCommand sterge_userbooks = new MySqlCommand("DELETE FROM userbooks WHERE userID = @userID AND bookID = @bookID", con);
sterge_userbooks.Transaction = tranzactie;
modificIstoric.Transaction = tranzactie;
adaugCarti.Transaction = tranzactie;
try
foreach (int i in res.CheckedIndices)
res.SelectedIndex = i;
bookidi = Convert.ToInt32(res.SelectedValue.ToString());
MessageBox.Show(bookidi.ToString());
//bookidi va fi id-ul cartea bifata, pe rand din checklistBox
//Inregistrez in tabela imprumut
modificIstoric.Parameters.AddWithValue("@UserID", useridu);
modificIstoric.Parameters.AddWithValue("@BookID", bookidi);
modificIstoric.Parameters.AddWithValue("@returnDate", termenul.Value);
modificIstoric.ExecuteNonQuery();
modificIstoric.Parameters.Clear();
sterge_userbooks.Parameters.AddWithValue("@UserID", useridu);
sterge_userbooks.Parameters.AddWithValue("@BookID", bookidi);
sterge_userbooks.ExecuteNonQuery();
sterge_userbooks.Parameters.Clear();
//Scad numarl de carti disponibile pentru cartea imprumutat
//adaugCarti.Parameters.AddWithValue("@bookid", bookidi);
adaugCarti.Parameters.AddWithValue("@bookid", bookidi);
adaugCarti.ExecuteNonQuery();
adaugCarti.Parameters.Clear();
tranzactie.Commit();
catch (Exception ex)
tranzactie.Rollback();
MessageBox.Show(ex.Message);
catch (Exception ex)
MessageBox.Show(ex.Message);
public Imprumut()
InitializeComponent();
try
con.Open();
catch (Exception ex)
MessageBox.Show(ex.Message);
Completez_Combo_User();
Completez_CheckList_Carti();
Completez_CheckList_Cartires();
//selecteaza_carti_utilizator();
// Initializez termenul din dateTimePicker la data de peste 15 zile fata de data sistemului
termenul.Value = System.DateTime.Now.AddDays(15);
private void imprumuta_Click(object sender, EventArgs e)
Confirmare c = new Confirmare("Confirmati imprumutul?");
DialogResult dr = c.ShowDialog();
if (dr == DialogResult.Yes)
try
Inregistrez_imprumut_in_BD();
MessageBox.Show("Imprumutul a fost inregistrat");
//Dupa inregistrarea imprumutului o parte din carti nu mai sunt disponibile pentru imprumut
//Reincarc in CheckList cu Carti noua lista cu carti ramase dupa imprumut
//Pentru asta "resetez" datele din dataTable cartiT (sursa pentru carti.DataSource)
CartiTabel.Clear();
adaptCarti.Fill(CartiTabel);
CartiImprumutateTabel.Clear();
adaptCartiImprumutate.Fill(CartiImprumutateTabel);
catch (Exception ex)
MessageBox.Show(ex.Message);
if (dr == DialogResult.No)
MessageBox.Show("Imprumutul NU a fost inregistrat");
imp.ClearSelected();
//deselecteaza cartea selectat
foreach (int i in imp.CheckedIndices)
imp.SetItemChecked(i, false);
//debifeaza cartile bifate
//if (imp.CheckedItems.Count > 0)
// //res.Items.Clear();
// foreach (string str in imp.CheckedItems)
// res.Items.Add(str);//adauga in partea cealalta, imprumuta
// while (imp.CheckedItems.Count > 0)
// imp.Items.Remove(imp.CheckedItems[0]);
private void restituie_Click(object sender, EventArgs e)
Confirmare r = new Confirmare("Confirmati restituirea?");
DialogResult dr = r.ShowDialog();
if (dr == DialogResult.Yes)
try
Inregistrez_restituire_in_BD();
MessageBox.Show("Restituirea a fost inregistrata");
//Dupa inregistrarea imprumutului o parte din carti nu mai sunt disponibile pentru imprumut
//Reincarc in CheckList cu Carti noua lista cu carti ramase dupa imprumut
//Pentru asta "resetez" datele din dataTable cartiT (sursa pentru carti.DataSource)
CartiTabel.Clear();
adaptCarti.Fill(CartiTabel);
CartiImprumutateTabel.Clear();
adaptCartiImprumutate.Fill(CartiImprumutateTabel);
catch (Exception ex)
MessageBox.Show(ex.Message);
if (dr == DialogResult.No)
MessageBox.Show("Restituirea NU a fost inregistrata");
res.ClearSelected();
//deselecteaza cartea selectat
foreach (int i in imp.CheckedIndices)
res.SetItemChecked(i, false);
//debifeaza cartile bifate
if (res.CheckedItems.Count > 0)
foreach (string str in res.CheckedItems)
imp.Items.Add(str);
while (res.CheckedItems.Count > 0)
res.Items.Remove(res.CheckedItems[0]);
private void button2_Click(object sender, EventArgs e)
con.Close();
this.Close();
//private void selecteaza_carti_utilizator()
// res.Items.Clear();
// MySqlCommand selectcart = new MySqlCommand("select title from books,userbooks where userbooks.userid='" + user.SelectedValue.ToString() + "' and userbooks.bookid=books.bookid", con);
// MySqlDataReader reader = selectcart.ExecuteReader();
// try
// while(reader.Read())
// res.Items.Add(reader["title"]);
// catch(Exception ex)
// MessageBox.Show(ex.Message);
// finally
// reader.Close();Hello Vincenzzo,
This issue seems to be a window form UI implemented related issue, for this i suggest that you could ask it to the windows form forum:
http://social.msdn.microsoft.com/Forums/windows/en-US/home?forum=winforms
The current forum you posted to is used to discuss and ask questions about .NET Framework Base Classes (BCL) such as Collections, I/O, Regigistry, Globalization, Reflection.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I have two AppleID's. Can I set up a new Apple ID just for document syncing in iCloud? How?
I have two AppleID's. Both use known email addresses. I need absolute security for documents. Can I set up a new Apple ID just for document syncing in iCloud? How?
Sorry, I did not mean to imply that security was non-existant or horrible, just it is online, so no absolutes.
iCloud is really not useful, IMO, for collaborating as only you or your AppleID enabled devices can access the files.
I have multiple online storage accounts with the common free services, but my most used is www.box.net. Many document apps will readily support it, and even if one does not, you can use the box.net app itself to access files, then open them in the app usually. And you can share your online folders, with reasonable controls on access to keep control of who can see (and upload or download) what.
A lot of people I know use dropbox as well, but they are usually using paid accounts (often their company sets one up for them to use to exchange files with clients) and I don't know how much better is the security on a paid dropbox account versus a free one. I suspect the free ones are on a par with box.net.
You could also use add security by using some sort of PGP or other encryption tools to encrypt files put up on the shared folder(s). You'd exchange public keys with your colleagues so they could decrypt those files once they download them. That may be overkill for many peoples needs though.
Another option, if you have an online hosting account, is to get one that offers SFTP access and use that for sharing files (the downside of that is having to distribute the password to colleagues, so you could loose control of it if one of them is careless or thoughtless with it). It seems more and more document-type apps for iOS are supporting generic FTP and SFTP as well as the popular free online storage solutions. -
Time Capsule just for backups, not for wifi.
I used to use my Time Capsule for both backups and wifi but constantly had issues, so I just disconnected it in favor of a simple Airport Express. No issues since switching, but now I have this Time Capsule just sitting here and don't do automatic backups any longer...I would like to use solely for back ups, I don't need these backups to be wireless, just for use with Time Machine. I can't find the answer by google, any suggestions?
I am trying to do the same thing but I am having an issue.
I, too, was having issues with using the Time Capsule (new one-2T) as a router and for backup (the Internet was dropping all the time). So I bought a separate router (ASUS RT-N56U) and have that plugged into my Motorola modem. The Time Capsule I have plugged into the router.
Airport Utility and I have become best friends as of late with all the problems I am having and my TC keeps getting lost-AU says that it was part of my network and now can't be found. Strangely, if I go to Open Network Settings from the menu bar and select Assist Me--->Diagnostics--->Select my network--->Continue and when the window pops up about Always Allow Keychain, I click on Always Allow. And that seems to correct the problem with my TC not being found/part of the network. This happens all the time lately.... Ever since I got the new router.
So if you or anyone have any insight into what is going on.... I will try it! Thanks for the help, Judy -
Output not getting proposed from a Purchase Order just for One vendor
Hi All,
We have an issue where in we have maintained a condition record with the access as "Purchase Doc type (NB) and Purchase Organization(XXXX):" pointing towards a "LS" partner function (ALE) and "4"
We have also maintained Partner configuration correctly. The issue which happens only in Production and not in TEst systems which is " only for ONE VENDOR the output is not getting proposed and for the other vendors it is getting proposed correctly. We also have a requirement attached to the Output and we do not have any vendor specific logic.
We also checked /Compared both the test and production system on Output Configuration as well as master data for VEndor and Info records and they seem to be ok.
Does any one faced a similar situation why an Output would not propose just for one specific vendor?
Would appreciate if any one can reply asap.
Thanks,Then check with the requirement you are using bd64 is distribution model.
Check with ur output type, requirement and output determination. ale service comes only in picture partner profile with outbound parameters.
have u done the correct entries under message control in outbound parameters.
thanks
Aman
Maybe you are looking for
-
Just recently I haven't been able to drag songs into other playlists or onto my desktop. I haven't changed any preferences. What can I do to fix this?
-
0Contract as line item dimension
Hi all, Should 0Contractnumber and 0Accountnumber be identified as a line item dimensions? but there are many relationships with these object? thks, rgds, wills
-
Z580 thermal management stuck on dedusting. Need Help ASAP
I have a lenovo z580 ideapad laptop and couple days ago thermal management button stuck on dedusting. I restarted my laptop couple of times and re-installed energy management but there is no difference, problem doesn't solved. I look previously opene
-
Partner cannot access the workspace on Beehiveonline
Hi Phil, I created a workspace for collaboration with an Italian partner, but when Daniele Bianchi tries to login he gets an access denied 403 error. Could you please assist? The workspace is: Collaboration_Beta80_Oracle https://beehiveonline.oracle.
-
I cannot watch movies on netflix because I cannot download silverlight off of safari
How do I watch movies off of Netflix on the Safari browser? I cannot download Silverlight for some reason.