Scanners not detected in "Photo downloader" of Adobe Bridge CS6

After fresh install scanners are no longer detected using Photo downloader in Adobe Bridge CS6

Hi Mylenium. I have sorted it out. The camera is a Nikon D5100. The drivers for my USB ports had become corrupted somehow, so I uninstalled the USB ports and rebooted the computer. Windows installed new drivers and it is all good now. If anyone reading this has the same problem try looking under Device Manager and see if there are little exclamation marks beside your USB ports. If so right click on them and uninstall them and then reboot.

Similar Messages

  • When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue

    When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue.

    Hi Jdentremont,
    Lync client gets user photos by first querying the Address Book Web Query (ABWQ) service on the server, which is exposed through the Distribution List Expansion web service. The client receives
    the image file and then copies it to the user's cache to avoid downloading the image each time it needs to be displayed. The attribute values returned from the query are also stored in the cached Address Book Service entry for the user. The Address Book Service
    deletes all cached images every 24 hours, which means that it can take up to 24 hours for new user images to be updated in the cache on the server.
    To troubleshoot your problem, please follow the steps below:
    1.  Navigate to
     “X:\share\1-WebServices-1\ABfiles\000000000\000000000” folder. (ABS file share)
    You should see some photo files in this folder as the following screenshot.
    2. Delete all the files in this folder.
    3. On test PC, delete local cache files.
    %userprofile%\AppData\Local\Microsoft\Office\15.0\Lync\[email protected]
    4. Sign-in Lync with the test account.
    5. Go back to the ABS file share, check if there is any Photo file in the folder.
    Best regards,
    Eric
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Uninstalling Adobe Bridge CS6 after installing Adobe Bridge CC

    I got all of my Adobe Applications on my MacBook Air through the new Adobe Cloud service. At that time, all of the applications were Adobe CS6. When I saw that Adobe Bridge CC was available, I downloaded it immediately. I had been having problems with Adobe Bridge CS6 working with my Adobe Photoshop CS6. After installing Adobe Bridge CC, I did not find the uninstaller application for Adobe Bridge CS6. I found two copies of the uninstaller for Adobe Bridge CC. Where can I get a copy of the uninstaller for Adobe Bridge CS6 for Mac?

    Vizzpat there is no separate uninstaller for Adobe Bridge CS6.  Adobe Bridge CS6 is installed by several applications.  When those applications have all been removed then Bridge CS6 will be removed as well.
    In general you can locate the uninstallers for Mac OS in the Applications/Utilities/Adobe Installers folder.  You can also find additional information regarding installing and removing applications at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.

  • MACBOOK AIR Camera is not detected in Photo Booth or FaceTime

    MACBOOK AIR:  Camera is not detected in Photo Booth or FaceTime.  It did work for a short period and now it is not detected.

    Hi there,
    There are a couple of things that we can try. A good first troubleshooting for a varity of issues is resetting your computers PRAM.
    OS X Lion: Reset your computer’s PRAM
    http://support.apple.com/kb/PH4405
    If your issues persist, then ther eare some troubleshooting steps found in the article below.
    How to Troubleshoot iSight
    http://support.apple.com/kb/ht2090
    Hope that helps,
    Griff W.

  • Camera not listed in Photo Downloader

    Greetings,
    My camera is connected to my computer through a dock, but it is not listed in Photo Downloader. I've installed the drivers, so it is visible in Windows Explorer under "Portable Devices" (it doesn't have a drive letter assigned to it).
    Does anyone have any troubleshooting steps I could try?
    Thanks,
    Shane.
    Windows 7 Home Premium SP1 64-bit
    PhotoShop Elements 11.0

    Hi Mylenium. I have sorted it out. The camera is a Nikon D5100. The drivers for my USB ports had become corrupted somehow, so I uninstalled the USB ports and rebooted the computer. Windows installed new drivers and it is all good now. If anyone reading this has the same problem try looking under Device Manager and see if there are little exclamation marks beside your USB ports. If so right click on them and uninstall them and then reboot.

  • In ADOBE BRIDGE CS6 "folder can not be created" appears when getting photos from camera

    Has anyone seen this when getting photos from camera in ADOBE BRIDGE CS6?
    "Folder cannot be created"

    I solved the problem myself.
    jwerth2

  • Adobe Bridge CS6 will not open

    Just started trial of Adobe Photoshop CC  ( CS6 and Bridge CS 6)
    Photoshop  downloaded ok but Bridge CS6 will not open after installation.
    I have used Adobe Bridge with CS2 before but since removing CS2 and installing CS6 and Adobe Bridge 6 64Bit Adobe Bridge will not open.
    Help
    watchet7

    CS2 seems to conflict with CS6.  One user found this to work.  AppData is a hidden folder in case you try this.
    I finally got it to launch via instructions from another web page. In my case, I am running Win 7 Professional 64-bit and previously loaded Photoshop and Bridge versions CS2 (along with Illustrator and InDesign CS2), which might have been part of the problem. The solution for me was to create an empty "Bridge CS2" folder in the C:\Users\[your user name]\AppData\Roaming\Adobe\. Worked like a charm.
    You might have to use the Adobe Script Cleaner to get rid of traces of the CR2 files.

  • Someone who can help me to do.  Adobe Bridge CS6 Update 5.0.2 The update is not applicable. Error Code: U44M2P28

    Someone who can help me to do.  Adobe Bridge CS6 Update 5.0.2 The update is not applicable. Error Code: U44M2P28

    be sure to use the correct update (32 or 64 bit).
    http://www.adobe.com/downloads/updates/

  • I am trying to download the Adobe Photoshop CS6 Extended Student and Teacher Trial

    I am trying to download the Adobe Photoshop CS6 Extended Student and Teacher Trial and it had me download te assistant. After downloading the assistant, I installed it and I signed in. It wants me to pick a product to download and the Adobe Photoshop CS6 Extended Student and Teacher is not listed. The closest thing to download is Adobe PS CS6. Please help me

    there is no specific trial for S&T. It's just the normal program. S&T is a licensing/ pricing thing, not some technical difference.
    Mylenium

  • Windows 8 Pro Adobe Bridge CS6 5.0.1.23 x64 not responding

    On my new SSD with a fresh install of Windows 8 Pro and Adobe CS6 Design and Web Premium, I regularly get a "(not responding)" warning in Bridge's (5.0.1.23 x64) title bar when opening a folder location, and the program takes around 10-20 seconds to display folder contents. This seems to be an indexing or caching issue, but I have not resolved it through the following fix attempts.
    In Bridge settings, I have placed the cache on the OS SSD at "C:\Users\York\AppData\Roaming\Adobe\Bridge CS6\Cache", and I have placed it on a separate internal physical HDD at "D:\Adobe Bridge CS6 temp cache". I have experimented with all other options (100% previews, export, manage, compact, and purge cache - restarting the app after each tweak).
    I have Ctrl-opened Bridge to access the "Reset setting" dialog box, where I restored default preferences and purged the cache. This did seem to alleviate the problem temporarily, but it did not resolve it.
    I have not uninstalled, repaired, or re-installed Bridge because it is not listed as a standalone app in the "Windows Control Panel > Programs and Features > Uninstall or change a program" window or the Adobe CS6 Design and Web Premium installer.
    My system is Intel i7-2600K, Asus Maximus IV Gene-Z, Nvidia GeForce GTX 560 Ti, 32GB RAM, Samsung 840 250GB SSD, various HDDs.
    My other system, an Intel Quad-Core Q6600, Asus P5Q-Pro, AMD Radeon HD 6950, 8GB RAM, Samsung 840 250GB SSD, various HDDs, does not have this problem.
    Any thoughts are appreciated.

    Thanks for the input, Curt. I have not changed the TEMP/TMP directories, which are set per Adobe instructions at http://helpx.adobe.com/bridge/kb/bridge-crashes-changing-temp-file.html. Temporary "not responding" freezes (10-20 seconds) are my issue. Crashes, as others are reporting due to the temp directories, are not occurring.  Other thoughts are appreciated.

  • Adobe Bridge CS6 "The operation could not be completed"

    I cannot get Bridge CS6 to run under my Mac account.  All other accounts on my MacBook Pro work fine with Bridge.  I have re-installed CS6 several times and I have searched the internet for days to find a solution. I can see that this is a common problem but there is no workable solution, and Adobe still refuses to admit there is a problem and to offer a fix.

    Only my account won't run this product all other accounts on the same machine seem to work okay.
    Then the problem lies in your account. A fresh install would not help unless you also used the Adobe Clean tool to remove all other settings. But that is a bit harsh to try because then all other Suite info is also deleted and you have to reinstall the lot.
    And when the app runs in other account it means the install on root level (where your default application folder is and where all other account also make use of) is correct.
    The easiest thing would be to create a new account but I don't know if that is an option for you regarding other settings and stuff in this account.
    First run Apple Disk utility on your problem account to check and repair disk permissions.
    Then open your user library (by default hidden, use menu Go and press option to reveal this library)
    Go to the folder called preferences and inhere is Bridge5 plist file, delete this to the trash.
    In same user library go the folder called Caches and follow this path / Adobe/ Bridge CS6  and inhere delete both the folder called Cache and the plug in. All deleted files will refresh them selves after you managed to restart Bridge.
    Then again use the option Curt provided, hold down option key while restarting Bridge and from the options choose preferences.
    Then try again.
    The other option would be to use the MacOs recovery disk on this user account to create a new user library while archiving the older one.
    Disk drive 750Gb with 40Gb spare.
    Usually at least 10 % free space is recommended for running smoothly. Bridge is very processor demanding and if you have other applications running 40 GB is simply to low to run your system and apps smoothly.
    Also be aware that if you have multiple user accounts installed and on all accounts you use Bridge you should find a new location for the cache file. By default Cache is stored in the User library (see above). And depending on amount and size of files and preview settings (100% preview creates huge files) this cache folder can grow to very large proportions.
    If you have different user accounts and all create their own library you need to recache every time you visit in the new account.
    I have no personal experience with multiple accounts on my machine so don't know if Bridge can handle multiple accounts on one machine with one cache folder on root level.
    Network usage is not supported and often difficult but having one machine with one root file for cache might work without problems.

  • FLVs created with ADOBE MEDIA ENCODER CS6 do not display thumbnails in ADOBE BRIDGE CS6

    Could you please attempt to shed some light on why FLVs created with ADOBE MEDIA ENCODER CS6 do not display thumbnails in ADOBE BRIDGE CS6, yet apple finder is able to display thumbnails for these same FLVs without issue?
    I'm running CS6 Production Premium with ALL updates installed on 10.6.8
    I appreciate any input and help provided the input is provided by someone who either
    A) knows the answer because they actually work for adobe
    B) actually tried this themselves before attempting to provide a solution
    If the conclusion is that it is a codec issue or a header issue with the FLVs You'd have to present a very strong case to back that claim up as it makes no sense whatsoever that CS6 is unable to generate thumbnails for media encoded using CS6, yet Apple finder can without issue. NOT to mention the FLVs in question are CREATED on the same machine with the same codecs installed that is trying to generate previews in Bridge.
    Apologies if my frustration is showing, I've gotten and seen several... incompetent replies on this forum regarding this issue and it has never been actually addressed properly as far as I can tell by Adobe support.

    We are all just incompetent users here.  As pointed out before this is just a user to user forum, Adobe rarely checks in.
    I was hoping by now you would have gotten to the bottom of this problem and were offering a solution.

  • The sub menus in will not open for my tools in Adobe Illustrator CS6

    the sub menus will not open for my tools in adobe illustrator CS6 and I have the "show tool tips" box marked

    Click and hold. Or Click-hold and immediately move to the right.

  • Adobe Bridge CS6 does not display WMF graphics files - what to do?

    The question says it all.  I am running Win7Pro 64bit with Adobe Bridge CS6.  This may be a windows/microsoft/wmf file format problem...but what to do?  WMF files display with a icon only.  Please advise.

    Apparently Bridge cannot preview .WMF files. I have old ClickArt CDs and occasionally want an image. So I have converted all the .WMF files to .AI using a script in Illustrator. Once converted, Bridge will display a thumbnail.
    Here is the script written by Carlos Canto. (Thank you Carlos, whoever you are!)
    Copy the script text. Paste in a plain text editor. Save as ConvertWMFtoAi.jsx in the folder Program Files: Adobe: Adobe Illustrator CS6: Presets: en_US: Scripts
    Then you find it in Illustrator under File: Scripts
    // script.name = makeAiFilesPDFcompatible.jsx;
    // script.description = opens and resaves Ai files with PDF compatibility checked (Folder Batch);
    // script.requirements = none
    // script.parent = CarlosCanto // 06/4/2013;
    // script.elegant = false;
    // script.forumPost = http://forums.adobe.com/thread/1224874?tstart=0
    var folder = Folder.selectDialog("Select Source Folder..."); // select folder
    if (folder==null) {
                        alert("Good Bye");
    else {
        var files = find_files (folder, ['.wmf']);
              var fileCount = files.length; // count them
              if (fileCount>0) {
                        for (i=0; i<fileCount; i++) {
                var idoc = app.open(files[i]);
                var saveOpts = new IllustratorSaveOptions();
                saveOpts.pdfCompatible = true;
                idoc.saveAs( files[i], saveOpts );
                idoc.close();
            alert(fileCount + ' file(s) processed');
              else {
                        alert("There are no Illustrator files in this folder.");
    // recurse subfolders - Peter Kharel
    function find_files (dir, mask_array){
        var arr = [];
        for (var i = 0; i < mask_array.length; i++){
            arr = arr.concat (find_files_sub (dir, [], mask_array[i].toUpperCase()));
        return arr;
    function find_files_sub (dir, array, mask){
        var f = Folder (dir).getFiles ( '*.*' );
        for (var i = 0; i < f.length; i++){
            if (f[i] instanceof Folder){
                find_files_sub (f[i], array, mask);
            } else if (f[i].name.substr (-mask.length).toUpperCase() == mask){
                array.push (f[i]);
        return array;

  • Camera Raw Preferences in Adobe Bridge CS6

    I can click on Camera Raw Preferences from the Adobe CS6 Menu, but nothing happens. No error meesages come up, but nothing happens.
    I recently installed ACR7.3. I did have some problems getting ACR7.3 installed. The updater from Photoshop and Bridge didn't seem to install it.  I had to download ACR7 and install it.
    After the successful install of ACR7.3,  I can double click on an image in Adobe Bridge CS6 and it will open the raw image in ACR7.3 in Photoshop CS6.
    The other annoyance is that the images for my RAW files for my Panasonci GH3 don't display in Adobe Bridge. They appear as a blank icon
    I am running on a Mac OS X 10.6.8 64 bit
    Adobe Bridge CS6 5.0.0.399
    Adobe Camera Raw 7.3.0.71
    Adobe PS C6 13.0.4  x64
    I do have older versions of Adobe CS5 and CS4 that I have never removed. I've never had problems before. And didn't need the space so I just left them.
    Any ideas of why Adobe Bridge CS6 and ACR7.3 aren't in sync? - Thanks Rod

    Ok, everything was ok until I rebooted my machine. Now when I open Adobe Bridge CS6, The Raw images show up initially. But when Adobe Bridge finally gives me control, the images have become blank icons again. I've tried the CommandOptionShift and it does not help.  It was fine for two weeks and now I can't get the raw images to stay.
    Here is what I see as Adobe Opens the older. The Raw images are viewable.
    Now this is how they look after Adobe Bridge has finished opening and I can click on something:
    Where do I go from here?

Maybe you are looking for