Scanning 35mm slide to convert to digital.

I am about to begin scanning 35 mm slides I have taken over the last 30 years hoping to preserve in a digital format. Are there any tips I should be aware of in preforming this task. I am particularly interested if here are any settings for size... so that when they are projected on screen I have something filling the screen without large amounts of black boarders.
Also is there any special way they should be stored in iPhoto. (other than events, etc.)
Any suggestions would be helpful. Thanks in advance.
Bilco

Lauraly.....
I haven't actually done what you intend but here's some things to consider.
Your 35mm slides have an aspect ratio of 3:2 ( 36mm x 24mm). Normal TVs and many Monitors have and aspect ratio of 4:3. Some widescreens TVs are 16:9. This means you wont get a 35mm slide to fit exactly. Either it will be 'letterbox' sshape on your screen or if you size to fit then something will be cropped off.
As for scanning you should consider what resolution you need for the end display. If your display has for example a width of 1280 pixels then you should aim to scan the slide to achieve the same number of pixels - which works out to be approx 355 pixels/cm or 900 pixels/inch. For a TV you could probably get away with less.
If your scanning the slides you may want to go flat out so that the images could also be printed out sometime in the future in which case you may want to scan at something like 3200 or 6400 pixels/inch.
Once you've scanned the images you'll need a program to make the slide show. Photoshop Elements 5 can do this but in my opinion Proshow Gold is a better program. Don't make a Video CD (VCD) - the quality of the playback is poor. Go for high quality DVD
Elements can't actually burn the DVD - you need another program for that. Proshow will do everything and more.
You can download a free program from Microsoft called Photostory 3. It will allow you to make the slide show for playback on your PC - including music - but to make a DVD you need another program. If you have a DVD burner the s/w for that may be suitable.
Hope this helps.
Colin

Similar Messages

Scanning 35mm slides to create slide show

My objective is to scan 35mm slides and create a presentable slide show for viewing on a computer monitor and TV. (regular TV)
I am using an Epson 4490 Perfection scanner and Photoshop Elements 2 software.
This should be relatively easy, but I'm running into difficulty and can find nothing in the "help" section of the software that answers my question.
How would you set the scanning options to obtain a good quality scan, without the software automatically cropping the slide, and being of good quality when viewed on the monitor/TV?
After completing the scans, I'll need to create the slide shows and save them to disc. Any suggestions or information you could offer in these areas would also be helpful:
- Tutorials for creating slide shows, included in the Elements 2 program or elsewhere.
- What would be the best quality disc to save these to?
Thanks so much for the help

Lauraly.....
I haven't actually done what you intend but here's some things to consider.
Your 35mm slides have an aspect ratio of 3:2 ( 36mm x 24mm). Normal TVs and many Monitors have and aspect ratio of 4:3. Some widescreens TVs are 16:9. This means you wont get a 35mm slide to fit exactly. Either it will be 'letterbox' sshape on your screen or if you size to fit then something will be cropped off.
As for scanning you should consider what resolution you need for the end display. If your display has for example a width of 1280 pixels then you should aim to scan the slide to achieve the same number of pixels - which works out to be approx 355 pixels/cm or 900 pixels/inch. For a TV you could probably get away with less.
If your scanning the slides you may want to go flat out so that the images could also be printed out sometime in the future in which case you may want to scan at something like 3200 or 6400 pixels/inch.
Once you've scanned the images you'll need a program to make the slide show. Photoshop Elements 5 can do this but in my opinion Proshow Gold is a better program. Don't make a Video CD (VCD) - the quality of the playback is poor. Go for high quality DVD
Elements can't actually burn the DVD - you need another program for that. Proshow will do everything and more.
You can download a free program from Microsoft called Photostory 3. It will allow you to make the slide show for playback on your PC - including music - but to make a DVD you need another program. If you have a DVD burner the s/w for that may be suitable.
Hope this helps.
Colin

Scanning 35mm slides into iPhoto

Can I, and if so, how do I scan 35mm slides into an IMac? I have a Nikon Super Coolscan5000. I have plugged it into the USB port on the back of the IMac but the computer does not recognize the scanner.

Can I, and if so, how do I scan 35mm slides into an IMac? I have a Nikon Super Coolscan5000. I have plugged it into the USB port on the back of the IMac but the computer does not recognize the scanner.
Sure - all you need is a Mac compatible 35mm scanner with Mac software
From the Nikon page (found using Google)
For Macintosh
CPU: Power PC G3 or later (G4 or later recommended).
OS: Mac®OS 9 (9.1 or later), Mac®OS X (10.1.5 or later).
* RAM: Mac®OS 9: 64MB or more (256MB or more is recommended), Mac®OS X: 128MB or more (512MB or more is recommended).
** Hard disk: 70MB required for installation (200MB is recommended) with an additional 200MB >(Mac®OS 9) or 550MB (Mac®OS X) of free disk space while Nikon Scan is running.
Display: 800 x 600 with 16-bit color (full color recommended).
Interface: * USB: Built-in USB 1.1 ports, USB 2.0. Others: CD-ROM drive required for installation.
my first suggestion would be to read the Nikon manual - it probably tells everything you need to use it on your Mac
Or take a look at Preview - it has the capability to import from scanners
LN

Transfering scanned 35mm slides

What is the suggested file size for scanned 35mm slides to transfer to iDVD? My file sizes I believe are too small at about 260Kb per image, and I think the processor is working so hard to bring them up to the iDVD format, that more often then not, during the burn process my computer will freeze up entirely. And the ones that do complete the burn process, the images are poor quality when watched on a regular television. I am currently using an Epson Perfection to perform the scanning process. thanks for any help.

oliviagrace,
See iDVD 6.0 Help - Preparing images for DVD slideshows at http://docs.info.apple.com/article.html?path=iDVD/6.0/en/17.html
It will answer your qurstion.

Scanning 35mm slides

I'm attempting to scan 35mm color slides using Epson Scan and an Epson 3170. I've got the scanner set up correctly, the slide holder in place, etc. But when I scan the slides, they turn out incredibly dark, even if the slide photo is well-lit. I've checked the settings (using professional mode) and they are correct as far as I know. A friend suggested that I should try to select the area inside the white slide frame before I scan, but I'm not clear on how to do that before scanning. I can't find any tips on the Epson site, so I thought I'd ask here. Any help greatly appreciated.

How is Photoshop involved in this operation?
I suggest you download the trial version of VueScan and try scanning with that. If there's nothing wrong with the scanner and/or its transparency adapter, VueScan should give you a proper scan at its default Transparency settings.
The scan will have a watermark making the image unusable because it's the demo version, but the exposure and the colors should be spot on.
VueScan: http://www.hamrick.com/
Of course, I'm assuming the transparency scanner is properly connected to the scanner. :)

Scanning 35MM slides - which DPI?

I would like to scan several hundred 35 MM slides with my Epson 3200 scanner, and create a slide show with iMove.
The scanner will scan slides up to 4800 dpi, but it will take a lot of time and create very large files as well.
Is it really necessary to scan at such a high DPI for this project or could I get good results with lower DPI.
Thanks

Hi John,
This page should help you decide. What it all comes down to is, what you want to do with the final images...web, print, really big prints, just for viewing on your computer, etc.
http://www.rogerhalstead.com/scanning.htm

No option to scan 35mm rolls with 10.10.2 and a HPScanjet g4050

before the necessary use of Image Capture to get access to my scanner options, i used the "original" HP software without problems, The scanner performed all the necessary work in a sequence, working in "backstage" while other tasks were made. After the introduction or the Apple "obligation" to use Image Capture to get scanned results, the process worked correctly for a while, (after if i remember correctly the leopard /tiger updates...), but recently i need "again"to scan archived rolls, and with Yosemite, NO WAY... HP updates are installed, the scanner works for flat doc, images, picts, aso, but when the 35 mm roll scan option is set in Imag e capture /scanner options, i can choose with the small rectangle (35 mm pict size) a part of the 5 strips on the scanner "preview" tray, BUT id scan is asked, no results. The scanner moves very fast over all the tray, and no result appears.
I was suggested to "un-update" the recent updates, and use an older version of OS who "could" be still compatible with such EXCELLENT SCANNER.
Is such problem actually related to the recent update of Mac OS, or is the scanner( or my mac) infected or unadjusted correctly in some way ?
if the Apple software update produced such problem, how could that be justified ? Because all must be digital to be compatible with modern Mac's, and their design of newer OS are considewrinf scanning 35 mm archives an obsolete option in 2015 ?
Any clue ?
Thanks
Zappymax

Similar problem with a Photoscanner HPscanjet 4890 : all ok for doc's pdf pictures ... but no way to scan 35mm slides with the HP soft. The preview scan is OK, as well as the thumbnails of the16 scanned slides. As soon as I start to save those slides, I got a message that the scanner couldn't write the file.
When scanning multiple slides or 35mm strips the scanner needs to write a text file to organize the separation of all the individual pictures. I saw this under SnowLeopard:the scanner writes a number of small temporary files in the root directory. Apparently, on Yosemite this is not allowed ...
My work around (from last week) :
If you have a possibility to boot up on good ol' SnowLepoard - you can just scan your slides or strips as usual.
What i did on Yosemite :
Start the scan, on the sidebar it will show a scan with all individual pictures on it, and below all the single pictures.
Now, delete all but one of these single pictures.
Then, on the multiple view, extend the last only selected picture all over all the others, the individual one now shows you the whole assembly !
Save it (its a single file with all on it, it can grow very large - mine was 1.5 GB)
Then do the separating job manually, in Gimp i selected and saved picture after picture in individual files. After 50 or so pictures that procedure goes very fast

How can 35MM Slides be transfered to DVD?

I have 100's of slides that need to be transfered to DVD's, &/or iDVD, &/or iPhoto.... A transfer device is available for PC's but is there an affordable transfer device for Mac users???

I have an Epson 4180 flatbed scanner which will copy my 35 mm slides 4 at a time. It takes about a minute a slide. The software that came with the scanner imports the pictures to the mac in JPG form. I then import in into I-photo. I had about 4000 slides collected over 50 years and there are a 1000 in my I-photo library. This software will also scan the slide and convert it to PDF which is handy for copying and sending correspondence or whatever in E-mail.

I have a G4050 scanjet compatibility with Image capture... no way to scan 35mm rolls...

my G4050 worked "before" correctly to scan 35mm rolls, aso. For months was not using such kind of scanning, Recently after trying again such 35mm negs or transparency scans, NO WAY...
Image capture doesn't work for such scan, probably because latest IOS updates have changed the options.
HP years ago provided excellent software for 35mm scanning with the 4050 but as Image capture is "now" indispensable to scan, but the incompatibility is evident.
WHY ?
Are we forced to use another "pro" stuff ( like Epson 800, f.i.) to keep scanning rolls ?
Is there a problem inside the PC, the Image Capture software, or where is the solution ? any option to use other software welcome...

Similar problem with a Photoscanner HPscanjet 4890 : all ok for doc's pdf pictures ... but no way to scan 35mm slides with the HP soft. The preview scan is OK, as well as the thumbnails of the16 scanned slides. As soon as I start to save those slides, I got a message that the scanner couldn't write the file.
When scanning multiple slides or 35mm strips the scanner needs to write a text file to organize the separation of all the individual pictures. I saw this under SnowLeopard:the scanner writes a number of small temporary files in the root directory. Apparently, on Yosemite this is not allowed ...
My work around (from last week) :
If you have a possibility to boot up on good ol' SnowLepoard - you can just scan your slides or strips as usual.
What i did on Yosemite :
Start the scan, on the sidebar it will show a scan with all individual pictures on it, and below all the single pictures.
Now, delete all but one of these single pictures.
Then, on the multiple view, extend the last only selected picture all over all the others, the individual one now shows you the whole assembly !
Save it (its a single file with all on it, it can grow very large - mine was 1.5 GB)
Then do the separating job manually, in Gimp i selected and saved picture after picture in individual files. After 50 or so pictures that procedure goes very fast

HP Scanjet5500c dark images from TMA adapter for 35mm slides

Scanned 35mm slides using the TMA adapter turn out very dark, not suitable for printing. So dark people in the images are identifiable.
Should there be light showing from the TMA adapter in addition to the flatbed scanner? If so, that's my problem, a burned out bulb. Long time since I've used the TMA adapter so I can't recall if the adapter had a light when new.
Looking forward to your responses.
Thanks
talker

Hi there @talker2002
Welcome to the forums
By your description, it does seem like a burnt out bulb. As HP does not replace the actual bulbs, I would suggest calling phone support directly to see what your options are.
If you are calling within North America, the number is 1-800-474-6836 and if you are calling outside of the US/Canada,: click here.
Best wishes,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Converting 35mm slides

Has anyone found a good product for converting 35mm slides to digital images that drops the image into Photoshop Elements? If so I am keen on any recommendations and suggestions.

I own the Wolverine unit which I purchased from Amazon
http://www.amazon.com/s/ref=nb_sb_ss_i_2_13?url=search-alias%3Dcomputers&field-keywords=sl ide+scanner+35mm&sprefix=slide+scanner%2Ccomputers%2C178
The scannned slides are processed in the unit and you get JPEG files. These files are stored on a camera card which you upload to disk.
I have scanned over 200 slides. Above is a picture taken in 1957, right out of the scanner without further enhancement.
TIP: If you decide to go this route, scan the portrait oriented slides in landscape mode. Otherwise, on some, there may be cut-off. You can rotate them on the computer subsequently.

Why did my CanoScan 8800F stop scanning my 35mm slides into IPhoto 09 version 8.1.2 (424)? I did it exactly the same way as I had done about two hundred other slides.

I had been using my CanoScan 8800F unit to transfer 35mm slides into digital pictures within my IPhoto 09, Version 8.1.2 (424).
All of a sudden it stopped transferring photos even though I could hear it scanning. Any ideas "why/"

I guess I will wrap this up. I have abandoned iPhoto and viewing my Photo Streams using it and moved to Adobe products (Bridge + PS). So that's that.

Looking for Pixma plus 35mm slide scanning!

Hello.
I used to have a Canon Pixma printer with a 35mm scanning facility built in to the lid. Broke down some time ago, unfortunately.
And now Canon don't do Pixma printers with 35mm scanning.
Been scouring the internet for an MG8250 or equivalent, with no luck. I don't WANT to change from Pixma. I think it's possibly the best colour print system you can buy, but I do need that 35mm slide scanning facility, so any suggestions as to an alternative product, i.e. a good quality colour printer (plus copier plus flatbed scanner plus 35mm slide scanner), offering similar print quality as the Pixma?
I suppose one alternative is to buy a stand-alone 35mm neg scanner, but I also have a number of ancient (1890s) large b&w negatives so a 35mm-only carrier wouldn't do - I need something where I can use bits of tape etc. to hold odd-sized films.
Thanks for reading, and I hope someone has a suggestion or two.
Allen.

Aside from looking at the pretty transitions, did you read
the rest of the
page? See the part where it says "Step 1 - copy and
paste....."
Then do Step 2. It just can't get any easier than that.
Read the bit underneath step 2 and it tells you how the
script can be used
multiple times on a page - Again - step 1: you give it a new
name in the
javascript file, and add the names and paths of the images
for the
consecutive slides you wish to display. Then, again, Step 2 -
you call the
slideshow somewhere on your page.
Without sounding condescending, sit back, read the
instructions again, and
have a go at implementing them into your page.
Upload your efforts, post a link to the page, and we'll be
able to help you
further if you need it.
You can describe what you have, how you want it to work, but
until we see a
page live, its a bit hard to help further.
Last resort, spring for a paid solution to do it all for you
(which I highly
recommend) -
http://www.projectseven.com/products/galleries/ssm/index.htm
Brendon
"Fugasi" <[email protected]> wrote in
message
news:gju0dl$olu$[email protected]..
> Brendon-
>
> >I've used this one many times before with good
success:
>
> I don't know how to use this, its a bunch of code.
>
> 1. Do I C&P this and paste it into my page? Where on
the page?
> 2. I actually want to have four separate slide shows
happening at once on
> the
> same page. Will this code allow me to do that?
> 3. Right now I have four photos in-line horizontally in
non-css table. I
> want
> those four to interchange as a slow dissolve slide show.
How do I specify
> that
> I want the slide show to appear in the table cells?
>
> Thanks
>

Convert 35mm slides to prints

Used to able to convert 35mm slides to print format using a HP flatbed scanner 7340 with XP. PC now Windows 7. Tried hooking up the flatbed to the PC to print a pic but no luck.

Hello sarmi2
Welcome to the HP Forums I hope you enjoy your experience!
If you could post your product number for your printer. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate whether your operating system is 32-bit or 64-bit as with this and the product number we can provide you with accurate information.
How Do I Find My Product Number?
http://h10010.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=bpy21016
Is the Windows Version on My Computer 32-bit or 64-bit?
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02033168
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Scanning a 35mm slide film and trying to get it a certain image size and resolution

Hi All,
I am using the Nikon Super CoolScan8000 and Vuescan program to scan a slide film. I am scanning at this setting: scan resolution 4000 dpi. I have to make it a certain dimension that someone has been asking me for. They want the image at Width = 60cm (approx. 23 inches) and 300 dpi.
When I scan at 4000 dpi, I'm not sure what size to make the printed width. I have experimented numerous times and I've had no luck with getting exactly what I want. It seems that when I make the width 60 cm (the height adjusts proportionately) and the dpi at 300, the quality is not that great, which it definitely needs to be because it will be printed at a large size.
Someone please help ASAP!
Thank you!
PS I am using Adobe Photoshop CS3 and I also have Adobe Photoshop Elements 9

You can only get 228 ppi out of the end product. That should be good enough.

Scanning 35mm slide to convert to digital.

Similar Messages

Maybe you are looking for