Scanning a document but only offer in file names are image options

I am trying to scan a document but my only options in the file names are image file names (.jpeg, bitmat etc...) I tried running the HP fix I found in another forum answer, downloaded and ran it, ran a test scan and saw all sorts of options including pdf. My test scan ran great, and my document scanned in as a .pdf. I then tried to scan again but again my only options were as an image file names. I restarted my PC but still the same issue. I am running windows XP.

In the print dialog of Acrobat choose 'Form fields only'.

Similar Messages

Numbers 09 not working - I can open the program but only a few files are available, missing blank, checklist and many others. e.g when I click on a file I get this error: The document "nmbtemplate is invalid. The index.xml file is missing. help.

Please let me know what I can do to get my Numbers (iWork 09) working properly again.
Here is what is going on:
Numbers in iWork 09 not working can't access Blank, Checklist and many other files within Numbers. I can open the program but only a few files are available. When I click on the file (which also has no icon just the name of the file) this warning appears:
The document "Blank.nmbtemplate" is invalid. The index.xml file is missing.
I recently had to get a new hard drive installed and had the system upgraded and more memory put in by a Mac certified specialist recommended to me from the Apple store in Northbrook because this was the 3rd time my drive went bad but this time it was to old (I got the IMAC- in 2007) and the Apple store could no longer work on it this time so they recommended a few places that had certified Mac specialists. Since then Numbers is not working right.
I'm sure it's something simple to fix, but I've tried re installing it and that didn't work. Appreciate any help.
Thanks
AppMare

There is one way its getting fixed. Once I update my Adobe Illustrator CC to Adobe Illustrator CC 2014 it is further allowing me to go into the system folder and allocate the font to the file so that it can replace it. My only concern now is that our MAC partners who will receive these files back from us have Adobe CS6. We will down save it to CS6 but I hope they won't experience any font issues because of us using CC 2014? Any light you can shed on this?

Adobe Acrobat Reader XI no longer copies the selection to where I want to insert it in an MSWord document, but only to the top of the page! How fix this?

I have Window 7 Professional SP1.

fouada2 wrote:
Adobe Acrobat Reader XI no longer copies the selection to where I want to insert it in an MSWord document, but only to the top of the page!
I have no idea what this means; can you elaborate?

Ipad only uses one file name when uploading images via email

We have an image tool that uploads images to a template website. The problem is the file names for these images must be unique any duplicate file names will be rejected. Some of our users want to be able to upload from the field but Ipad only assigns the file name "photo.JPG" to jpegs. It doesn't seem to include the sequential extension that actually does exist for the image on the file name when uploading. Is there a way to get ipad to do so, or is this something that Apple maybe want to consider looking into. I can easily see the average Joe emailing themselves images and hitting save only to replace and lose an older image because let's face it, not all users are on MACs and PC's do not allow multiple files to have the same file name in the same folder.

Hi,
Based on the description, you could send email to external addresses without the Twin Oaks software. However, with the Twin Oaks software, you couldn't send successfully.
For this issue, I recommend you enable message tracking and check whether you could retrieve message tracking log entires when you send emails to external addresses through the Twin Oaks software.
If you couldn't retrieve message these tracking log entires when you send emails to external addresses through the Twin Oaks software, it means that the Exchange server is OK and the crux of the problem is the Twin Oaks software.
Here is an article about message tracking log for your reference.
Get-MessageTrackingLog
http://technet.microsoft.com/en-us/library/aa997573(v=exchg.141).aspx
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Prompt For Document Title as well as file name

Is there script or setting which requires the entry of document title as well as file name upon the saving a document? I understand that I can open document properties prior to saving, but I would prefer to enter the save command and be prompted to enter a doucment's title as well it file name. Thanks.

You can use the Prefix field to include things like "Dr.", and this will appear on the label.
I do not see any automatic way to include Job Title, but if you don't have too many to print you can do a kluge by putting the job title in the first line of the addres, then return, then the real first line. This will print nicely. But is work putting it in.

Hello i am using ms word when i open my saved documents but cannot edit anythings and all are option is hide .....so how to edit

hello i am using ms word when i open my saved documents but cannot edit anythings and all are option is hide .....so how to edit

Hi,
In regarding of the issue, I need more information:
Which Office and operation system do you use?
Does the other Office suits encounter the issue?
Does the issue occur in some special documents or every documents (even a new blank Word document)?
Do you get some error message? Please upload some images about it if you can.
Let's try some methods, check if they are helpful:
a) Delete the Word Data registry subkey.
1.Exit all Office programs.
2.In Windows 8 or Windows 8.1, swipe in from the right edge of the screen, and then tap Search. (If you're using a mouse, point to the upper-right corner of the screen, move the mouse pointer down, and then click Search.) Type regedit in the search box, tap
or click Apps, and then tap or click Run.
Or, in Windows 7, Windows Vista or Windows XP, click Start, click Run, type regedit, and then click OK.
3.Locate the following registry subkey, as appropriate for the version of Word that you are running:
Word 2013
HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Word\Data
Word 2010
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Word\Data
Word 2007
HKEY_CURRENT_USER\Software\Microsoft\Office\12.0\Word\Data
Word 2003
HKEY_CURRENT_USER\Software\Microsoft\Office\11.0\Word\Data
4.Click Data, and then click Export on the File menu.
5.Name the file Wddata.reg, and then save the file to the desktop.
6.On the Edit menu, click Delete, and then click Yes.
7.Exit Registry Editor.
8.Start Word.
b) Start Word in
safe mode, if it works fine, the issue may be caused by the add-ins, please try to check them one by one.
c) Repair Office.
http://office.microsoft.com/en-us/project-help/repair-office-programs-HA010357402.aspx
For more detail information, please refer to the following link:http://support.microsoft.com/kb/921541/en-us
Regards,
George Zhao
TechNet Community Support

I have an iMac, an iPhone, and a MacBook Pro. My full iTunes library is on the iMac and iPhone, but only a handful of songs are on my MacBook. They are all associated with the same Apple ID. How do I get all of my music on the laptop?

I have an iMac, an iPhone, and a MacBook Pro. My full iTunes library is on the iMac and iPhone, but only a handful of songs are on my MacBook. They are all associated with the same Apple ID. When I try to sync, I get a warning message stating that I will lose songs on my phone which aren't on the laptop. How transfer my music from my phone to the laptop?

Hey kbert73
I would do a transfer of purchases from the phone and not sync. If you sync then it will want to start over and sync music that is on the MacBook Pro. If you want to transfer the music, check out the article below that will give you multiple options on how to move. I have also provided on how to sync with multiple computers.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Using iPhone, iPad, or iPod with multiple computers
http://support.apple.com/kb/ht1202
Thanks for using Apple Support Communities.
Regards,
-Norm G.

HT1349 How do I set up a separate icloud account? Both my wife and I have an iPhone 4s and an iPad, but only one Mac. We are tired of our "stuff" getting mixed up together when we sync.

How do I set up a separate icloud account? Both my wife and I have an iPhone 4s and an iPad (1 and 3), but only one Mac. We are tired of our "stuff" getting mixed up together when we sync. Thanks much

You don't need separate iCloud accounts if you want to simply sync unique content to each device using iTunes. I have three iDevices using one ID and one iTunes library and each device has it's own content on it. You need to set up the sync configuration for each device. This is what I recommend.
First turn off auto sync in iTunes. Launch iTunes on the Mac and go to iTunes>Preferences>Devices>Prevent iPods, iPhones and iPads from automatically syncing. Click OK and then quit iTunes.
Connect one of your devices to the Mac and launch iTunes.
Click on the device name on the left side under the devices heading.
Click on a tab in iTunes - Apps for instance.
Click on the Apps that you want to sync to that device.
Make sure that the Sync Apps heading is checked.
Follow the same procedure for all of the other tabs in iTunes ..... Music, Photos, Movies and so on.
After you have finished making all of your selections, click on Apply in the lower right corner of iTunes.
When you are done, eject the first device and do the same thing with the other device. iTunes will now remember the sync configuration on each device.
You can change that configuration any time that you like by following the steps outlined above.
If you want to continue to auto sync, turn it back on in the iTunes preferences as described above.

My file names have disappeared in grid view. Thery have been replaced with a dark bar along the bottom of the previews. If I toggle using the command u it hide the bar but I still can't see the file name. In list view all the file names are OK.

My file names have disappeared in grid view. Thery have been replaced with a dark bar along the bottom of the previews. If I toggle using the command u it hide the bar but I still can't see the file name. In list view all the file names are OK.

The dark bar is caused by the option "Show metadata below image".
Check the settings for the metadata overlays in Grid view (basic and expanded) by clicking the little "badge" icon below the Browser and selecting "Edit". Is the filename still enabled in the list? And in a high enough position to have precedence for other metadata tags, if the space does not suffice to show all selected tags?
Regards
Léonie

TS2512 i m trying to convert dpx files to mov in colour 1.5.3 but in file browser files are not seen in proper order for ex files names are 12345 it is coming as 23145 bcoz of which in output also its coming in wrong order

i m trying to convert dpx files to mov in colour 1.5.3 but in file browser files are not seen in proper order for ex files names are 12345 it is coming as 23145 bcoz of which in output also its coming in wrong order

1) What you downloaded should be a packed file (zip, tar.gz, etc) that needs to be unpacked into the directory of your choice.
2) & 3) are answered by Ant's installation documentation (the page you're quoting from):
http://ant.apache.org/manual/index.html

Any way to keep original file name as image name for web gallery?

Hi,
I wonder if there is any way to keep the original file name as image name for a web gallery (instead of "picture-1.jpg)
People often send us the thumbnails or the image from the web and we have to search forever to find the image in AP - if we could keep our original filename then this would be a second away.
Hope somebody has an idea
thanks

Hi William,
I finally had time to play - unfortunately it does
not work the way you described above.
I´m just exporting a set of images using the "Stock
Black" Theme - marked name only - batched the
filename to masterfile - but the actual picture names
are still "picture-1.jpg" - "picture-2.jpg".
did I miss anything? thanks
I see what you want, you don't care about the screen name so much but want the generated file names to be the same as the version names. From earlier messages though I am not quite sure why this is a problem, since you said other people were picking the images they wanted - say Image1 and 23 and 8. That to me says those people are going through the directory using Finder or Explorer, not using the HTML.
Is it the case you are giving people web galleries on CD? If so, then perhaps also export a "browse" directory with exported images using the version names, so that people can use the right name.
Or perhaps it's the case that people are downloading the images from the web, and then using the downloaded file names to send you requests. I'm not sure how to fix this yet and do not know if 1.1 offers something for this.

What file name, are old emails saved under in backups?

Time Machine, does not seem to operate properly, past the date when I clean installed Yosemite. My files are all there, but I can only find them by going into my drive, and either searching for the file in Time Machine, or searching for it in my backup drive. I cannot restore a mail file, by opening mail, and time machine. It works fine up until the date, when I installed Yosemite. I have done 2 different completely clean installs, and one using migration assistant, wt a multitude of problems. I am done wt doing that. My iMac is finally running smoothly, and I have managed to migrate everything back into my iMac, except for my old emails. I'm pretty sure that I could restore my emails, as long as I knew where there there supposed to be stored on my iMac. I could basically restore them, by either looking in my backup drive where they are before I installed Yosemite. What file name, are old Maverick emails saved under in backups?

The information viewed in Contacts is not located in a single file, nor a single directory.
[Copied from another thread I responded to recently:
https://discussions.apple.com/message/24658329#24658329]
This MIGHT be include all the files you need, but there might also be Preferences files needed from another directory.
Also, I migrated my data from an older OS X version (10.6.8) where the app was called Address Book. On brand new systems, it is called Contacts, and the correct directory might be named Contacts.
NOTE: Be sure to replace Macintosh HD below with the actual hard drive name if not Macintosh HD, and username below with the actual user's name...
Transfer all the files from Macintosh HD/Users/username/Library/Application Support/AddressBook/
That WILL INCLUDE each of these three subdirectories where the necessary files and data are stored:
Macintosh HD/Users/username/Library/Application Support/AddressBook/images
Macintosh HD/Users/username/Library/Application Support/AddressBook/Metadata
Macintosh HD/Users/username/Library/Application Support/AddressBook/Sources

How to position the cursor in File Name area in JFileChooser??

Hi,
I have been trying to position the cursor directly to filename area in JFileChooser. But no success.
It positions itself at the directory path by default.
How should I achieve this?
The problem is that I do not know the name of this
component used for File Name area hence difficult to
use "requestFocus() or getFocus()" like methods.
Thanks for your help.
-Manoj

Somewhere I saw a tip that explained how to do it, but I didn't keep a link to it. But basically it's like this: JFileChooser is a Container, so getComponent(n) will return the n-th component in the JFileChooser. One of them is the one you want to give the focus to, and I expect it will be a JTextField. A little experimentation should tell you which index you need to use.

File names of images in IPhoto

I have two questions. Does anyone know how to see the photo/file name of images loaded into IPhoto? Is there a setting that you can turn on to show the file name under each image?
Secondly. While trying to find answers to the above question I did discover the export originals option which would allow me to export images into a separate folder that does list the image numbers. This is a work around but not really what I'm after.
Doing this export I did get a folder of images with their respective file numbers attached. However, what is interesting and I'm hoping someone can answer is that many of the images that should have had my own personal image number, were actually labeled Slide 1, slide 2, etc, etc. When I originally imported these images they contained a number that looked like this 00478-22135. Does anyone know if the dash between the number may not be recognized by IPhoto which it then just labels a generic number it makes up on import? Or any other reason why it would not have accepted my original file name? I know it does accept some file names since several images with a different number format such as D223567 imported just fine and then exported with the correct original file names. Any suggestions are greatly appreciated.
MacBook Pro Mac OS X (10.4.7)
MacBook Pro Mac OS X (10.4.7)

Jim:
Under the View menu select "Titles" to get the file names. I don't know what you did but I just tried an import of a file titled 00478-22135.jpg and it kept the file name OK.
When you exported the files what was the Album name and did you use the "Use Album Name" option in the export". If the Album was titled Slides then you would get new file names titled "Slide-1.jpg", etc. That may be the reason.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB file backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Can I include the file names of images in the image itself?

*How can I get the file names of images on each image (without entering them by hand)?*
(I am bring 250 images into a Keynote document, with each image on its own slide. I want to have the file names of the images shown on each slide or image. This doesn't need to look nice.)
(If I can't do this in Aperture, I also have Photoshop Elements. Is there a way to do that in Elements?)

You can't do this directly via Ap3. There are plug in's i believe that make it possible. Maybe someone knows more? Allan

Scanning a document but only offer in file names are image options

Similar Messages

Maybe you are looking for