Scanning doesn't function

PC: HP HDX Premium Series
Printer HP Officejet 6500 E710a-f
Windows Vista
- Bought also I.R.I.S. OCR
- I have installed my mew printer, but can't scan anythin; scanner/printer doesn't find my computer.
- I am able to print using Ethernet connection
I have already done all the basic things (switch off the router / computer/ printer,  deleterd all the old software for printing and scanning, reinstalled the new devise etc.
What can I do?

I am having the exact same problem. I will add that scanning from the document feeder to my Mac Book works fine. The problem with the document feeder is only whenn atttempting to use the AiO software on my iPad.

Similar Messages

  • 7515 ios 8 scanning doesn't function using document feeder

    My AiO remote updated on my iPad today and i have issues scanning from the scanner. The printer and tablet functions properly when scanning using the glass however when using the document feeder, AiO remote scans the sheets then before saving it says there is a problem with the scanner, check the scanner. not sure why it works with the glass and NOT with the feeder.

    I am having the exact same problem. I will add that scanning from the document feeder to my Mac Book works fine. The problem with the document feeder is only whenn atttempting to use the AiO software on my iPad.

  • TS1717 I have exclamation marks (!) which has ruined my playlist as it doesn't function as it should. I was downloading music when a scan had started which I cancelled.  Ever since then I've had these exclamation marks anyone know how to fix it?

    I have exclamation marks at the beginning of the titles which has ruined my playlist as it doesn't function as it should. I was downloading music when a scan started which I then cancelled as it was slowing down my download. Ever since then I've had these exclamation marks and now these tunes are not transferrable and I've lost them in my music file on the ipod nano and so cannot reload them again. Anyone know how to remove the !!!'s or clean my files?

    You get exclamation marks or dead tracks because  iTunes can’t find the file. This can happen for a number of reasons:
    The song file or a folder in its path was renamed
    The song file or the folder it is in has been moved
    The song file has been deleted
    The device containing the song files e.g. external drive is not accessible or the drive letter has changed..
    Usually the actual music files are still there, so you need to check to see if you can find them.
    If they are there, open iTunes and select a problem track, right click and select Get Info.
    Answer NO when asked if you want to locate the track.
    Now you should see where iTunes thinks the tack is located on the summary tab, how does this compare with where the track actually is.
    This info should help work out what has gone wrong.

  • TS1702 I bought a budget sheet app from the apple store, there is no option of sub category given and therefore the app doesn't function can I get its money back ?

    I bought a budget sheet app from the apple store, there is no option of sub category given and therefore the app doesn't function can I get its money back ?

    Actually, wrong.
    The tech support people can help with Playbook purchased apps. If you've called and they said they cannot, you were lied to.
    Even in the link you posted, in #10, it states clearly "App Refund related matters are handled by BlackBerry Customer Care." That, my friend is accessed by the support number. Again, if you were told otherwise, you should inform them of such or ask for a manage/supervisor.
    And, you don't have a "Partner ID" because you are not a "Partner". The section you're referring to applies to mobile providers, which are the Partners.
    Good luck.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How to change the password and username in the scan to email function of a HP laserjet 300

    Trying to set up the scan to email function. Using the printer pad, I get as far as getting to  SMTP outgoing and then I get an error message that the username or password is incorrect.    I do not know what the correct  username or password is.
    I would like to get rid of what ever the incorrrect information is and  redo the information.  NO one seems to understand the problem.  Any help?

    @Ray2905 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • New iMac (10.9.4) & now my HP Photosmart 6520 "scan to computer" function does not work

    Recently upgraded to a new iMac running 10.9.4.  Printing works well from this computer and all other devices (iPad, iPhone, etc.).  However, the "scan to computer" function does not work.  In the "Scan" section of HP Utility when I click on "Scan to Computer" the error message reads "Scan to Computer Cannot Be Enabled. The software required for Scan to Computer could not be located on this computer. Please download and install the latest HP recommended software for your device from http://www.hp.com/support, and then try again.
    Of course I have done this... twice... still no luck.  Also ran Software Update and there was an update, but it made no difference.

    Yes, did all that... in order.  It did not resolve the problem.  However, I did find what appears to be the answer.  After re-installing the driver software DO NOT immediately follow the prescribed steps.  Instead, quit the installer, restart the Mac, and an Apple software update will appear after restart.  Install that software update, and even though the computer and software do not call for it, restart the Mac again.  Only then add the printer and follow the balance of the steps.  It works!   Thank you for your help.

  • I have an Apple Powerbook G4, and my monitor doesn't function. I have an external display Monitor, however it's stuck in extended screen mode. How do I get it to mirror or duplicate the display without use of the on-board?

    As i had said, I have an Apple Powerbook G4, and my monitor doesn't function. I have an external display Monitor, however it's stuck in extended screen mode. How do I get it to mirror or duplicate the display without use of the on-board? Is there a Fn key combo i'm missing or is the issue more serious then i realize? any and all help and hints would be greatly apprichiated, thanks in advance.
    -Powerbook User

    The PowerBooks have an F-key that toggles mirrored and extended mode. My PB is loaned out right now but I think it was f7. The keycap has an icon on two overlapping rectangles, as I recall.
    EDIT: Yes! Found a pdf of the PB manual it shows F7 is the toggle:

  • Wrong use of "Scan From String" function in a while loop?

    Hi,
    I've got a "Scan From String" function inside a while loop. On the first iteration it converts correctly the number passed by the input string (for example 4) But on the second one it has only spaces (one or more \s) as input string.
    I expected to obtain a zero as output (as it does always that it can not make any conversions, as I am supposed to) but indeed, i subtracts 1 from the previous number (according to the number indicated as example I would obtain a 3 as output)
    What's wrong with this?
    Does the function fails on this case?
    The rest of the diagram o the VI is expected to manage a 0 on that situation, like others in which the conversion is not made.
    Andres.

    I have simplified the VI evading calls to other VIs and trying to reproduce the mistake.
    The type of string I introduce to reproduce the mistake is:
    clock 3 (30) clock (40)
    Forgetting to introduce a number between the second "clock" and the following parenthesis, I would manage it programmatically with code that isn't included.
    Then "Scan From String" is supposed to do not make a conversion. But it leaves a 2 as output (in this example)
    I have realised, unbelievable but true, that it has matter with the number I substract to the output number (if it were 2, I would obtain 1 as output and so on)
    Excluding that, I got the conversion made before as output, 3, on the second time that "Scan From String" executes. But, how can this func
    tion as bad?
    I am using LV4 on an old PC. I have tried to reproduce it with LV6 and it works. But it isn't desirable for me, I would have to convert a lot of VIs and surely I will find a lot of errors due to the conversion (I have already tried)
    Attachments:
    EXTCLOCK.VI ‏26 KB

  • Two finger scroll doesn't function in mail

    Hi,
    two finger scroll , using trackpad, doesn't function anymore.
    Mavericks was installed some weeks ago.
    Also, trackpad gestures: three finger and four finger swipes do not function.
    all options are swichted on in preferences. now what?
    help will be appreciated.
    jw

    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
    On Sun, Jun 8, 2014 at 12:30 PM, YesThatTom <[email protected]>

  • Setup airport wrong, now scan doesn't find it. how do I fix?

    After excellent Apple help, I setup airport wrong, Now scan doesn't find the wireless router - time machine - at all. I think I may have selected bridge for internet, and now the amber light is on steady and doesn't show up in a scan so I can reset it. I have connected the cable modem directly to the computer to get local internet, but my wireless to other computers is down. Support is closed now - how do I fix? I appreciate any ideas on how to reach the time capsule/airport router.     

    The factory default reset does not require that you access the TC via the AirPort Utility first. Instead, you would first unplug the TC from power. Then using a paperclip or similar object depress and hold in the reset button. While still holding in the button, plug the TC back into power. Hold the reset button down until the status light starts flashing rapidly then release the button. You may have to perform these steps a few times to make sure the reset "sticks."
    Once you have successfully reset the TC, temporarily connect your computer directly, using an Ethernet cable, to one of its available LAN (opposing arrows) ports. You should now be able to access the TC using the AirPort Utility.

  • Itunes store search button doesn't function

    I recently bought an iMac and have the current itunes 11 loaded. This worked fine for few days but now the search in itunes doesn't function at all. i.e. you can type in it but it will not search in the store and the drop down menu form the magnifying glass doesn't appear either. Any ideas?
    Jerome

    After an upgrade to Mountain Lion the problem never solved.
    I also can't use my Audio Console via DJ software because the MP3 don't play, exactly like iTunes!
    The problem seems related to the audio framework residing into the OSX rather than an iTunes specific problem.
    Can I ask for OSX guarantee support?

  • Several Onmessage and asynchronous process doesn't function

    Hi,
    I'm using the BPM suite v10.1.2.0.2.
    A process instantiated by a pick with two onMessage, each receiving a distinct message from two different invoke from another process, doesn't function.
    I have the following error :
    <remoteFault>
    <part name="summary" >
    <summary>when invoking endpointAddress 'http://set.by.caller', exception during AXIS invoke: java.net.UnknownHostException: set.by.caller; nested exception is: javax.xml.rpc.JAXRPCException: java.net.UnknownHostException: set.by.caller</summary>
    </part>
    <part name="detail" >
    <detail>javax.xml.rpc.JAXRPCException: java.net.UnknownHostException: set.by.caller</detail>
    </part>
    </remoteFault>
    More clearly, when I Introspect the data entries to instantiate only the process beginning with the pick, It works with one operation, but not for the other.
    I can see that the error is the following : the server always looks after the same portType, and therefore generates the following error : operation cannot be found in the portType.
    I assume the code is correct describing the two operations.
    Has anyone already faced such a bug ?
    Thank you by advance,
    mlamarque

    Hi,
    I've been working on it these past days. I Never found the problem.
    You can find here the useful bpel code :
    <partnerLink myRole="BPELProcess1Provider" name="PartnerLink_1" partnerLinkType="client:BPELProcess1"/>
    <partnerLink myRole="BPELProcess1Provider2" name="PartnerLink_2" partnerLinkType="client:BPELProcess2"/>
    <variable name="variable1" messageType="client:BPELProcess1RequestMessage"/>
    <variable name="variable2" messageType="client:BPELProcess1RequestMessage2"/>
    <pick name="Pick_1" createInstance="yes">
    <onMessage portType="client:BPELProcess11" operation="initiate1" variable="variable1" partnerLink="PartnerLink_1">
    <wait name="Wait_1" for="'PT5S'"/>
    </onMessage>
    <onMessage portType="client:BPELProcess12" operation="initiate2" variable="variable2" partnerLink="PartnerLink_2">
    <wait name="Wait_2" for="'PT5S'"/>
    </onMessage>
    </pick>
    and here is the WSDL code :
    <portType name="BPELProcess11">
    <operation name="initiate1">
    <input message="client:BPELProcess1RequestMessage"/>
    </operation>
    </portType>
    <portType name="BPELProcess12">
    <operation name="initiate2">
    <input message="client:BPELProcess1RequestMessage2"/>
    </operation>
    </portType>
    <plnk:partnerLinkType name="BPELProcess1">
         <plnk:role name="BPELProcess1Provider">
              <plnk:portType name="client:BPELProcess11"/>
         </plnk:role>
    </plnk:partnerLinkType>
    <plnk:partnerLinkType name="BPELProcess2">
         <plnk:role name="BPELProcess1Provider2">
              <plnk:portType name="client:BPELProcess12"/>
         </plnk:role>
    </plnk:partnerLinkType>
    If I Try to introspect the call of 'intiate1' with a HTML form on the BPM server, I get the following error message :
    Unfound operation in the portType. The operation "initiate1" cannot be found in the portType "{http://xmlns.oracle.com/BPELProcess1}BPELProcess12". Check if the "initiate1" operation exists.
    The other branch is working fine.
    I can't help thinking that this is an Oracle Bug : the server always looks after the same branch.
    Anyway, thank you by advance
    Mathieu Lamarque

  • Flash player doesn't function in windows 8.1. all options have been exhausted

    Flash player doesn't function in windows 8.1.  Ive tried all the recommendations with no success.  any suggestions?

    Using IE 11?

  • Adobe products (CS6) doesn't function anymore, all reseted to trials. Activation keys not accepted.

    Hello,
    I'm a teacher at the Hague University in the Netherlands and I also bought the Adobe CS6 Master Collection, Adobe Premiere, Adobe Captivate 6 and it worked nice when I installed it in December 2012. But this morning all my Adobe software doesn't function anymore, I get the message that it is a trial version and it will only work for 30 days. This whole morning I am busy to get the software back to work, but also when I reinstall it and type the proper activation keys which also can be found in my Adobe-account, it says that the serials are invalid. Could I please get some support to solve this problem?
    Thank you in advance,
    B. Kranenburg

    Dear Mr. Kranenburg,
    As a teacher at a high school I experience the same problem. The problem is caused by a new licencing policy Adobe forced into place with CS6 products. The licenses you have are only valid for one year. Moreover they are actually valid for less than one year, since projects in Captivate created in the trial version mode you describe will have an expiration date. This will, in the very near future, result in non functioning projects/packages. The only way to overcome this problem is to renew your license, and republish the projects in the newly licensed product.
    I can understand that Adobe wants to get more revenue out of their products. I however do not understand that a license, said to be valid for one year, will not provide a workable solution throughout this full year. A very strange policy indeed!
    J. Bijvoet

  • My downloads-window doesn't function properly anymore, often it just stays blank, and the one in my taskbar doesn't turn green at all. Can you tell me how to fi

    My downloads-window doesn't function properly anymore. It just stays white whenever I am downloading something. Only after downloading the same file once or twice more, it shows the progress of my download. The window in the taskbar -that should progressively turn green- doesn't show anything at all anymore. How can I fix this?

    Note that there should only be a prefs.js file (Windows hides the .js file extension) and not a numbered prefs-##.js file.<br />
    The presence of a numbered file indicates there there has been a problem with creating/updating prefs.js at some time and you can remove the numbered prefs-1.js file.<br />
    If the main prefs.js doesn't have a current time stamp then you will have to delete that file as well and redo all customization settings in Options.
    Make sure that you do not run Firefox in (permanent) Private Browsing mode.
    *https://support.mozilla.org/kb/Private+Browsing
    *Tools > Options > Privacy: Use custom settings for history
    *Deselect: [ ] "Always use private browsing mode"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode

Maybe you are looking for