Scanning in pics for a Pictorial DVD advice?

Hello,
I'm using PS CS4. I'll be scanning in various photos into Photoshop. These in turn will be imported into
Premiere Pro CS4. There I plan on editing a pictorial DVD with music for a friends funeral next week.
My question is, is there a specific setting to import these photos or not? I'm sure they will be of different
sizes.
Any suggestions/advice would be appreciated.
Regards.
Mark

Hunt,
You're all over this forum... Thanks again for your timely reply and advice.
Best.
Mark

Similar Messages

How can i scan my mac for virus's

I download alot of music (not from stupid or untrusted sites) and torrents (mostly movies and music and software) but nothing stupid that i know for sure will infect my Macbook Air............but just to be on the safe side i want to know if their is a safe way i can scan my mac for a virus? from my personal experience anti virus's do more harm than good Suggestion? SOLUTIONS?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Name/{print $2} ' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

How to burn my pic's to a DVD-R?

Hi, Once again I want to thank all of you for your great help. Like I said I am a rookie at this stuff. My question is now that I have alot of pic's in my collection's from my organizer what is the easiest way to burn those pic's on my dvd-r? I have Roxio Easy Media Creator software 7.5
Or can I burn it using just my Photoshop Elemants 4.0?
Thanks again

Hey Raftman:
The way it finally sunk in for me was to first determine what the final product might be, and who would be using it.
In one case it might be a DVD with pics for a brother (who has a DVD player only in his computer) and a DVD movie/slideshow for sister (who has a standalone DVD entertainment player) and printed pictures for Mom an Dad (who refuse to use anything new).
But to really answer your question concerning DVD's. There are really only two ways using DVD recording software (Roxio/MyDVD/...etc).
1. You simply copy the images to a DVD as data or files. These DVD's are no different than storing the images on a hard drive except that they are portable and you can give them to someone who has a DVD player and image viewing software with their computer. However, this "Data" DVD is not a DVD that you could play in most standalone entertainment system DVD players (the one hooked to your TV)
2. You can also make a DVD that would contain your images as a slideshow or still movie. This format is the one that can be played in a standalone DVD player. Rather than view them using a computer and computer monitor as in #1 above, you view them on your TV. To do this again you need the proper software to create a DVD movie. That software essentially converts the images (JPEG, TIFF...etc)into the MPEG2 format which is the DVD movie standard. Normally you just drag and drop the images into the program...adding music is sometimes an option. I can't go into depth, because it depends on the software which you'll have to read and understand.
What are the primary advantages/disadvantages of each method?
Well, besides needing a computer and monitor for #1, everyone has to gather around the computer. But, a computer monitor will always be the best quality. Looking at the images would be no difference than looking at them on your computer. Just double click or load the image software and browse away.
Using a DVD and TV is easy for a group, but the televisions resolution or quality is no where as good as a computer monitor. Here you would simply load the DVD as a rented movie and the images would play or you would select them with your remote. There is the problem that all recorded movie DVD's are not 100% compatible with all entertainment system DVD players. "R-" DVD's are the most compatible. Many older DVD players simply will not play a recorded DVD.

Hi i wrote a java program for scanning a system for java.exe 's

hi ,
i wrote a program which scans the system for java.exe 's and then it captures them in a linked list and then i
iterate through it for "\\Java\\jdk1.5.0_08\\bin\\java.exe and my aim is to return true in case the linked list contains the string "\\Java\\jdk1.5.0_08\\bin\\java.exe" and stop scanning the system.
If the linked list does not contain "Java\\jdk1.5.0_08\\bin\\java.exe" it should return false.
But my problem is the program is continuing to scan the system even if the linked list has "\\Java\\jdk1.5.0_08\\bin\\java.exe"
Any sort of help is appreciated.
The code is as follows:
package com.installanywhere.exper;
import com.zerog.ia.api.pub.CustomCodeRule;
import com.installanywhere.exper.SearchTool;
* @author
public class eFileTool extends CustomCodeRule {
     /* (non-Javadoc)
     * @see com.zerog.ia.api.pub.CustomCodeRule#evaluateRule()
     @Override
     public boolean evaluateRule() {
          // TODO Auto-generated method stub
          SearchTool searchtool=new SearchTool();
          boolean valueTocheckfor=false;
          valueTocheckfor=searchtool.find();
          String someothervalue=Boolean.toString(valueTocheckfor);
          if(someothervalue.equalsIgnoreCase("true")){
               return true;
               //System.exit()
          else if(someothervalue.equalsIgnoreCase("false")){
               try {
                    Thread.sleep(5000);
               } catch (InterruptedException e) {
                    // TODO Auto-generated catch block
                    e.printStackTrace();
          System.out.println(valueTocheckfor+"xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx");
          return valueTocheckfor;
The code of search tool is
package com.installanywhere.exper;
import java.io.*;
import java.util.*;
public class SearchTool
     * @param args
static     boolean valuesToReturn=false;
static     boolean anothervalueToRefer=false;
     public static void main(String[] args) {
          // TODO Auto-generated method stub
          SearchTool           t = new SearchTool();
          System.out.println("xxxxxxxxxxxxxxxxxxxx");
          boolean someArgument=t.find();
          System.out.println(someArgument+"iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii"+"");
               public boolean find()
                    System.out.println("2222222222222222222");
               boolean someThing=searchcomp("java.exe");
               System.out.println(someThing+"inside the othere one");
               return someThing;
          public boolean searchcomp(String file)
               System.out.println("3333333333333333333333");
               File[] drives=File.listRoots();
               boolean valueIdentified=false;
               for (int ctr=0;ctr<(drives.length-1);ctr++)
                    valueIdentified=search(drives[ctr],file);
                    System.out.println("4444444444444444444");
               System.out.println(valueIdentified+"something i need to accomplish");
               return valueIdentified;
               public boolean search(File dir,String file)
               File[] directories=dir.listFiles();
          System.out.println("55555555555555555555555");
               if (directories == null)
                    System.out.println("666666666666666666666666");
               return false;
               for(int ctr=0;ctr<directories.length;ctr++)
                    if(directories[ctr].isDirectory())
                         System.out.println("77777777777777777777777777");
                         valuesToReturn=search(directories[ctr],file);
                         System.out.println(valuesToReturn+"india is great");
                    else
                         if(directories[ctr].getName().equals(file))
                              String path = directories[ctr].getAbsolutePath().toString();
                              System.out.println(path);
                              List someList=new LinkedList();
                              anothervalueToRefer=allPaths(path);
                              System.out.println(anothervalueToRefer+"god damn it");
                                   //System.out.println(anothervalueToRefer+"let me seeeeeeeeeeeeeeeeeee");
                              return anothervalueToRefer;
               return valuesToReturn;
               public boolean allPaths(String allPath)
                    List l=new LinkedList();
                    String somepath=allPath;
                    l.add(somepath);
                    //return l;
/*if(l.contains("C:\\Program Files\\Java\\jdk1.5.0_08\\bin\\java.exe")){
                         System.out.println("yepeeeeeeeeeeeeee");
                         //System.exit(0);
else{
     System.out.println(" the face");
                    ListIterator li = l.listIterator();
                    System.out.println("inside the method of all paths");
                    if(li.hasNext())
                         if(li.next().toString().contains("\\Java\\jdk1.5.0_08\\bin\\java.exe"))
                         System.err.println(somepath+"this is the path i wanted to resolve correctly");
                         return true;
                         else{
                              System.out.println("trueeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee");
                                   return false;
                    else {
                              return false;
     }

A good place to ask advice about web development is at the MozillaZine "Web Development/Standards Evangelism" forum.
*http://forums.mozillazine.org/viewforum.php?f=25
The helpers at that forum are more knowledgeable about web development issues.<br>
You need to register at the MozillaZine forum site in order to post at that forum.

Best application for Standard Def DVD creation?

I have a bunch of MiniDV tapes shot in standard def that I want to make into DVDs for my family. I want to preserve as much picture quality as possible during the process and will be using transitions, overlays, and credits.
I have used iMovie 08 and abandoned it because I needed dynamic chapter markers. I am now ready to edit the next DVD in the 'series', and with the advent of iMovie 09 and the availability of Final Cut Express at a reasonable price, I am trying to decide which way to go. I also have a copy of iMovie HD 6 which I used for my previous DVD.
From reading the reviews of iMovie 09 I am pretty confident that I would be happy with it functionally, but not if it costs me in picture quality. I noticed on my first effort using iMovie HD 6 and iDVD, that the DVD picture was not as sharp as the video viewed directly from the camera. Did I do something wrong, or is that a "feature" of iMovie? Would FCE be better?
My only concern with FCE apart from spending money that I may not need to spend, is the talk of a steep learning curve. With two little kids at home I don't have a lot of spare time. That said, I'd rather spend the time and get a sharp looking DVD than get a mediocre one quickly.
Thanks for any advice.
-John

skalicki` wrote:
What do you mean by "dynamic chapter markers"?
I meant the ability to define the precise location of the chapter within the movie, such that when exported to iDVD the menu allows you to jump to any point you have defined in the movie. By "dynamic" I mean they may be placed at random locations, rather than fixed intervals. iMovie 08 deleted the ability to add chapter markers, iDVD allows only fixed interval chapters (which seems useless to me), as does Toast. I tried the work-around of using Garage Band, but it fails on larger projects. I've read that iMovie 09 has restored the ability to add chapter markers where you want, but if I'm going to shell out more cash I might as well get the package that will get me the best picture too (within reason).
In any video application, for Chapter markers you simply place them in the application, then edit them in iDVD, DVD Studio Pro, etc.
Not in iMovie 08/iDVD, but now that you mention it, how does DVD Studio Pro compare to iDVD? I'm mostly focused on picture quality.
Do you mean better animated titles that you could use within the program? For this FCE is much better, because you don't need to work with the premade things, you can create and animate your own from the ground up.
That will be fun. Not what I was talking about, but a nice feature. I know that FCE will have lots of capability that iMovie doesn't (by design), that's just gravy.
I have used iMovie HD 6 to place chapters where I wanted them in my last DVD project, I didn't have much trouble working with it although it is a bit more "professional grade" than iMovie (I know, not saying much). How do the two compare for learning curve/user friendliness? I would like to say that I'd get a book to read on FCE but the truth is that on an average day I don't have time to watch the news let alone read a book.
In my opinion, FCE is definitely worth the investment and once you learn it you will never want to go back to iMovie!
Thanks, just the fact that the output is higher quality is a big pull for me. I think I'm going to take the plunge.
Now for the next question: FCE 4 or 3.5?
-John

I'll be getting a Mac on monday for video... advice?

Hi, guys. First post.
I will be getting a Mac on monday (if I don't panic). I asked for a quote on a 2.66mhz iMac with 4GB RAM, and I'd be paying USD $1.970 (i'm outside the US) so I wanted to get validation from you guys.
I own a Vaio laptop and a custom made PC, both of them almost 3 years old... so this is my first big investment in a long period of "computer lifetime". I've been wanting to make and upload short videos, capturing clips of the news (fair use of course) ... but a 15 minute video took about 8 hours to "render" and "export" in Adobe Premiere for Windows in my 1.73Mhz Pentium M Vaio FS750 with 1GB RAM. I'm thinking it will be easier and faster now ... with a Mac.
If I buy the Mac I'll be getting a Pinnacle USB Stick to connect the computer to cable TV (you know, the fat fiber-optics wire)
Will it really be easier? any advice? should I go for it no doubts? anything I should know as a newbie? should I be getting Final Cut Pro or Express? I won't be making Pixar-quality stuff, just YouTube-quality "informative" material.
Regards, and thanks!
Ana

Well, my understanding is that Adobe's rendering engine is faster than Apple's. That said, what format are you editing in and rendering to? 8-hours for 15-minutes certainly seems excessive. But then maybe you captured in some rare codec, edited in another and then wanted to compress to a third... I don't know. For best performance, editing and otherwise, I suggest sticking with miniDV on tape.
As far as easier, well I certainly like the operating system easier more than Windows. Windows is quite annoying about being your face all the time. That alone drives me nuts. In terms of editing be easier... I don't see how unless the program you were using was frequently crashing. Editing is editing. I do prefer my Mac because it is more stable. There is a big difference between FCS and FCE. However, in terms of pure editing, FCE is pretty powerful and not all that different than FCP. FCS will also come with Compressor for more control over your output; Motion, for motion graphics; Soundtrack for audio editing; Color for advanced color correction/coloring; and DVD Studio Pro for more advanced DVD authoring than iDVD. Again, in terms of just editing, not much difference. But the other tools in the FCS can make a difference should you decide to use them.
As far as having doubts.... let me just say that another reason I like my Mac is that if I do encounter an issue, it is more than likely ignorance on my part and not a problem with the computer. That really narrows down the troubleshooting. And then I can come here for advice on what I am doing wrong. HUGE benefit in my book.
Mike

I can't find the drivers to reinstall for my Hp DVD a Dh16absh scsi cdrom drive

My DVD drive was not working it said it was having trouble with the driver. I finally had to uninstall it. Now I want to reintall the drivers but can't find the right one. I used the HP program to scan my computer it just kept spinning. Does any one know the link for the Hp DVD a Dh16absh scsi cdrom drive

Hi
The latest driver for your ROM device is available from the link Below ... NB:: Be sure to download the Windows 7 64bit version of the driver for your machine ...
The driver you need is the Third one down the list....
http://www.driverscape.com/download/atapi-dvd-a--dh16absh-scsi-cdrom-device
Checkurtech
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

Best video Hardware/software for converting VHS DVD and others on Mac?

Hello,
I am having problems finding some much needed details on what the best software/hardware is for converting video formats on a Mac. I should note I am using a NEW iMac 4GB memory and Leopard OS so what I use needs to be compatible. Perhaps next year I will get a Mac Pro, but for now I'm using this setup. Here's is what I need to do:
1. Transfer old VHS tapes (home movies and such) to DVD. I need to be able to use DL DVD discs for my recordings so I don't have to switch DVDs. In other words make them just like the DVDs you play that you buy. Therefore, they also must be able to playback in home theater DVD players, not just on the computer. I would assume the best way as for encoding is to get the VHS tape in digital format on the hard drive, then use the codecs to turn them into DVDs?
2. Once on the hard drive I also need to convert them to a format neutral playback on both the Mac and PC. What is the best, MPEG 4?
3. The ability to do some nice editing of making bookmarks, chapters and thumbnails for the DVD menu and divisions I wish to make. In other words, if I have a home movie containing my Summer and Winter vacation, I want to insert bookmarks at points to skip to like in a movie DVD and also have a thumbnail of it just like DVD movies does.
4. A nice MAIN menu for the DVD that will let me hit the main categories, not just chapters for the TOP level DVD menu. Such as Summer Vacation, Winter vacation.
5. The software should be easy to use so I don't have to take a HUGE crash course requiring lots of work making the project a chore. Also, I don't want or need a professional package, just something simple that is less than $200 per software program. Not the expensive $500+ software options for movie makers.
Thank you for any tips and advice on this matter.

"Best software/hardware" depends on your exact needs & wants.
One simple way to transfer your VHS tapes to DVD is with a *DVD Recorder*. Many of these come with VHS and DVD decks already built in. Insert your VHS tape, a blank DVD, hit record and off it goes. When finished, you have a playable DVD.
To transfer your VHS tapes to DV for editing you will need a converter. The *Canopus ADVC-110* is a very nice, relatively inexpensive device that will do that job for you. (It's also possible to use most modern DV camcorders as converters, too.) You would connect your VHS deck to the Canopus box via their analog video & audio connections, then connect the Canopus box via FW to your Mac, and then when you play the VHS tape you would capture the video in iMovie or FCE.
Once your videos are captured on your Mac, you could use iMovie or *Final Cut Express* to do whatever editing you might want to do. Regardless of which one you edit with, however, it's iDVD that you would use to create your DVD menus and burn your DVDs.
So, overall, the workflow would be like this: *VHS Deck > Converter (camcorder or converter box) > Capture on Mac (iMovie or FCE) > Editing application (iMovie or FCE) > iDVD > DVD*
For playback on computers MPEG4 would be an ok choice, H.264 is probably a better choice, and then there's the matter of whether or not you want to export as a QuickTime movie and/or AVI.
iLife came with your Mac, so you already have iMovie and iDVD. How about giving them a try before you consider investing in a significantly more sophisticated application like Final Cut Express. (just my opinion)

J2ME for BD-J programming advice.

Hi all:
Sorry for my ignorance but I am a DVD author and I am very interested in learning BD-J programming for Blu-Ray format and since it is based into J2ME, I would like to ask you some good Sun online course about this topic or some good book about it, for it, Could anybody advice me?
Thanks in advance.
Alejandro Cast�n
Ps: Sorry for my little english.

Hi Alejandro,
Check at http://hdcookbook.com in a couple of days. We're
still getting things set up, but there you'll soon be able to find:
* A BD-J discussion forum
* Some prototype code
* Information about the High-Definition DVD Handbook (by Mark Johnson et al)
* Information about the upcoming "HD cookbook" by the same publisher, which
will have more about actually programming BD-J. (I'm working on writing
the BD-J chapters for this right now).
I'm afraid that publicly accessible BD-J information isn't so easy to come by
right now. This should substantially improve over the coming months.
Cheers,
Bill

Scanning Printed Materials for 4K

Hi there,
I need to get a number of printed materials (photos, letters, articles etc) scanned by numerous people across the U.S. for a current project.
I would like to get the material scanned at the highest resolution possible to allow for zooming/re-framing in Premiere.
I am wondering what is/if there is a recommended dpi for scanning printed materials for 4K screening?
From calling every place I can find in the first location, for some of the most important material, the highest resolution print/copy places offer seems to be 600dpi.
I am wondering if 600dpi is usually the max limit for scanning printed materials or if 1200dpi and upwards is typical and I somehow haven't managed to find the right places (although I have called literally every print/scan shop on google for the first city)?
Many thanks...

While dpi doesn't apply to video (which measures by pixels), it most certainly matters for scanning stills to be used in the video. The higher the dpi of the scan, the higher the resulting image resolution in pixels. 100dpi would be inadequate for even SD video if using less than an 8x10 source.
Simple math says scanning dpi x inches (of source photo) = pixels
An 8 x 10 image scanned at 600dpi would be 4800x6000 pixels. Note that most still images are not a 16:9 format, so the scanned image typically does not "fit" the video screen without some cropping or black edges to make up the difference. The 8x10" scan at 600dpi would work for 4k video, but smaller pics like a 4x6 or 5x7 is going to fall short, so yes you will want to try and scan at 1200dpi. What about wallets? Even at 1200dpi, not much resolution to work with.
I like the photo idea of shooternz, if the photos can for instance be put on an easel and the still camera on a tripod takes a high megapixel image, if the lighting works without reflections. Might be an good option. I used to "grab" SD stills on a copy stand with a DV camera years ago.
The maximum frame size that can be imported for still images and movies is 256 megapixels, with a maximum dimension of 32,768 pixels in either direction. Adobe Premiere Pro Help | Importing still images
Thanks
Jeff

HT4943 How do I scan a code for a free download of a magazine on the iPad 1?

How do I scan a code for a free newsstand download on my iPad 1? Thanks for help!

Thanks! I take all my pics on my phone, so I forgot the first IPad doesn't have a camera.

How to SCAN uploaded files for VIRUS in APEX

part 1:
Goal:
Do a virus scan of the uploaded file from APEX application prior to storing the file in custom tables.
The process:
Followed the document from www.developer.com:
Implementing an Anti-Virus File Scan in JEE Applications
By Vlad Kofman
Go to page: 1 2 3 Next
This article will discuss one of the ways to implement antivirus file scanning in Java, particular in the JEE applications. Viruses, Trojan Horses, and different malware and spyware are a real problem for current computer environments, and especially for the Windows operating system. If you are designing any application in Java that has a requirement to be able to upload external files, you have a potential security risk. By uploading, I mean any way to get the external file inside of the corporate firewall be it via HTTP protocol or any other means. It is quite common to have this type of requirement in an enterprise application and with Java being one of the most popular web development platforms, it is unfortunate that this type of gaping security risk is quite often overlooked.
Java's Development Kit (JDK) does not have any means to do the antivirus scan right out of the box. This is primarily because Java is a programming language, and does not have any virus scanning packages. Furthermore, anti-virus software is not Sun's area of expertise or business model. Developing this type of software (or Java package), and more importantly maintaining it, would be a huge task for Sun. Mainly because viruses are constantly evolving and keeping virus definitions up-to-date is a daunting task. Large companies such as McAffee, Symantec, or Zone Labs develop virus detecting and combating products and spend a lot of resources to maintain them.
Application Environment
To implement a virus file scan in Java, a third-party package needs to be used. For the purposes of this article, I will use Symantec Scan Engine (SSE) package, which comes with Java APIs. This package is an application that serves as a TCP/IP server and has a programming interface and enables Java applications to incorporate support for content scanning technologies. For this article, I used Symantec Scan Engine 5.1, which is available as a Unix or Windows install.
If you are using an anti-virus package from the different vendor, you will need to investigate what kind of APIs are available; however, the general approach should be similar. Also, note that my implementation can be used with JEE technology and any modern MVC framework such as Struts or Spring.
The architecture is as follows: A server machine needs to have SSE running at all times. This can be the same machine that hosts your Application Server, but in an enterprise environment this should be a different machine. The Default Port needs to be open through the firewall to allow communication with the scan engine. All JEE applications that need to do file scanning can talk to the SSE server machine through a default port. Also, multiple applications running on different application servers can re-use the same scanning server. For more information, you should refer to the Symantec Scan Engine (SSE) Installation Guide, available on the Symantec web site.
When an external file that needs to be scanned is sent to the SSE via its programming interface (Java APIs using the default port), before any other operation on the file is performed, the SSE returns a result code. For instance, a file is uploaded by an external user into the web email type application as an attachment; then, the SSE API is invoked by the application and the return code of pass or fail determines the outcome of the upload and whether that email can actually be sent. If you have an account on Yahoo mail, you probably have seen that Yahoo is using Norton Antivirus to scan all attachments, although no Java.
Click here for a larger image.
Figure 1: Screen shot from Yahoo
For details on the Scan Engine Server Installationm please see the Symantec Scan Engine (SSE) Implementation Guide from Symantec.
Here are some key things to remember about SSE:
•     Java 2 SE Runtime (JRE) 5.0 Update 6.0 or later must be installed on the server before the SSE installation is done.
•     After installation, verify that the Symantec Scan Engine daemon is running. At the Unix command prompt (if it's a Unix install), type the following command:
ps –ea | grep sym.
A list of processes similar to the following should appear:
o     5358 ? 0:00 symscan
o     5359 ? 0:00 symscan
If nothing is displayed the SSE process did not start.
If the SSE process did not start, type the following command to restart SSE:
/etc/init.d/symscan restart
•     Keeping the virus definition up to date is the most important task and if new updates are not installed, the whole scan becomes ineffective. Symantec automatically downloads the most current file definitions through LiveUpdate. Please make sure that firewall rules are in place to allow the host server to connect to the Symantec update service.
Project Setup
For the purposes of this article, I included a wrapper for the Symantec SSE APIs, av.jar, which has Symantec Java APIs and serves as a client to the SSE server and takes care of all communications with the server. Please refer to the download source section. The av.jar should be included in the Java CLASSPATH to work with the SSE. This jar contains a class called AVClient that takes care of actually sending the files to SSE as byte arrays and returning the result.
In my project setting, I added three variables to be accessed via the System.getProperty mechanism. For example:
AV_SERVER_HOST=192.168.1.150
AV_SERVER_PORT=1344
AV_SERVER_MODE=SCAN
The AV_SERVER_HOST is the host name or IP of the machine where Scan Engine is installed.
The AV_SERVER_PORT is the port where Scan Engine listens for incoming files.
The AV_SERVER_MODE is the scan mode which can be:
•     NOSCAN: No scanning will be done (any keyword that does not start with "SCAN" will result in ignoring the call to the Scan Engine and no files will be transferred for scanning).
•     SCAN: Files or the byte stream will be scanned, but the scan engine will not try to repair infections.
•     SCANREPAIR: Files will be scanned, the scan engine will try to repair infections, but nothing else will be done.
•     SCANREPAIRDELETE: Files will be scanned, the scan engine will try to repair infections, and irreparable files will be deleted.
Note: For the file stream (byte array) scanning, the only meaning full values are "SCAN" and "NOSCAN".
Using the SSE Scanning Java APIs
In any class where scan is required, call the scanning API provided in the AVClient object located in the av.jar. The AVClient object will establish connection to the Scan Engine server and has the following APIs:
Figure 2: The significant APIs for the communication with to the Scan Engine Server.
If scanning a file on the file system, in SCAN only mode, use the call that accepts filename only.
If scanning a file on the file system, with SCANREPAIR or SCANREPAIRDELETE, use the call that accepts input and output file names.
If scanning an in-memory file (byte array), use the call accepting byte array.
For example:
import com.av.*;
Initialize setup parameters:
static String avMode =
(System.getProperty("AV_SERVER_MODE") != null)
? (String) System.getProperty("AV_SERVER_MODE") : "NOSCAN";
static boolean scan = avMode.startsWith("SCAN");
static String avServer =
(String) System.getProperty("AV_SERVER_HOST");
static int avPort =
Integer.parseInt( (String) System.getProperty("AV_SERVER_PORT"));
Scan check example for an in-memory file byte array:
public void scanFile(byte[] fileBytes, String fileName)
throws IOException, Exception {
if (scan) {
AVClient avc = new AVClient(avServer, avPort, avMode);
if (avc.scanfile(fileName, fileBytes) == -1) {
throw new VirusException("WARNING: A virus was detected in
your attachment: " + fileName + "<br>Please scan
your system with the latest antivirus software with
updated virus definitions and try again.");
Note that if you are using this code inside of the MVC handler, you can throw a custom VirusException and check for it in the calling method and perform any necessary cleanup. I have included the class in the AV Jar as well.
For example:
catch (Exception ex) {
logger.error(ex);
if (ex instanceof VirusException) {
// do something here
else {
// there was some other error – handle it
For more details on the Scan Engine Client API, please see Symantec Scan Engine Software Developers Guide.
Continuation in part2

part 4:
c)     Clienttester.java – This is the gui app set to test if the configuration is working or not. This gui uses the method scanfile(inputfile, outputfile) as you can see the result in the outputpane of the jframe.
* clienttester.java
* Created on April 12, 2005, 2:37 PM
* @author george_maculley
package com.av;
import java.io.*;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class clienttester
implements ActionListener {
// private String ipaddress = "127.0.0.1";
private String ipaddress = "199.209.150.58";
//private String ipaddress = "192.168.0.55";
static JFrame frame;
JFileChooser chooser = new JFileChooser();
TextField pathtofile = new TextField(System.getProperty("user.home"), 30);
// TextField pathtooutfile= new TextField(System.getProperty("user.home"),30);
private int port = 1344;
JButton filechooser = new JButton("Browse to file"); ;
private String originalfilename;
private String outputfilename;
JButton scanbutton = new JButton("Scan");
TextArea outputarea = new TextArea(20, 40);
TextField iptext = new TextField("127.0.0.1", 16);
TextField porttext = new TextField("1344", 5);
AVClient mine;
JRadioButton choosescan = new JRadioButton("SCAN");
// JRadioButton choosedelete= new JRadioButton("SCANREPAIRDELETE");
/** Creates a new instance of gui */
public clienttester() {
public clienttester(java.lang.String ip, java.lang.String infile, java.lang.String outfile, int port) {
this.ipaddress = ip;
this.port = port;
this.originalfilename = infile;
this.outputfilename = outfile;
boolean setValues(java.lang.String ip, java.lang.String infile, java.lang.String outfile, int port) {
this.ipaddress = ip;
this.port = port;
this.originalfilename = infile;
this.outputfilename = outfile;
return (true);
public void actionPerformed(java.awt.event.ActionEvent actionEvent) {
JComponent c = (JComponent) actionEvent.getSource();
if (c == filechooser) {
int retval = chooser.showDialog(frame, null);
if (retval == JFileChooser.APPROVE_OPTION) {
File theFile = chooser.getSelectedFile();
if (theFile != null) {
pathtofile.setText(theFile.getPath());
// pathtooutfile.setText(theFile.getPath());
JOptionPane.showMessageDialog(frame, "You chose this file: " + theFile.getPath());
if (c == scanbutton) {
//return object that can be passed to AVClient
String policy;
int thisport;
int scanresult;
String thisip;
String inputfile;
String outputfile;
outputarea.append("Server: " + iptext.getText() + "\r\n");
if (choosescan.isSelected()) {
policy = "SCAN";
else {
policy = "SCANREPAIRDELETE";
thisport = new Integer(porttext.getText()).intValue();
thisip = iptext.getText();
//mine= new AVClient(iptext.getText(),porttext.getText(),policy);
mine = new AVClient(iptext.getText(), thisport, policy);
if (mine.test() == 1) {
outputarea.append("Sorry. Incorrect parameters specified.\r\n");
System.exit(1);
else {
outputarea.append("Connection to SAVSE initialized.\r\n");
inputfile = pathtofile.getText();
// outputfile=pathtooutfile.getText();
outputfile = "/tmp";
outputarea.append("Scanning file " + inputfile + " \r\n");
if (policy == "SCAN") {
scanresult = mine.scanfile(inputfile);
else {
scanresult = mine.scanfile(inputfile, outputfile);
if (scanresult == 0) {
outputarea.append("File is clean.\r\n");
else if (scanresult == -1) {
outputarea.append("File is infected. \r\n");
else {
outputarea.append("Scan error.\r\n");
void display() {
Frame f = new Frame("SAVSE JAVA ICAP Client");
f.setLayout(new GridLayout(1, 2));
JPanel lpanel = new JPanel(new GridLayout(7, 1));
JPanel ippanel = new JPanel();
JPanel portpanel = new JPanel();
JPanel rpanel = new JPanel();
JPanel outputpanel = new JPanel();
JPanel buttonpanel = new JPanel();
JPanel pathpanel = new JPanel();
// JPanel outpathpanel= new JPanel();
JPanel policypanel = new JPanel();
ButtonGroup policygroup = new ButtonGroup();
filechooser.addActionListener(this);
scanbutton.addActionListener(this);
choosescan.setSelected(true);
policygroup.add(choosescan);
// policygroup.add(choosedelete);
buttonpanel.setBorder(BorderFactory.createTitledBorder("Scan Policy"));
buttonpanel.add(choosescan);
// buttonpanel.add(choosedelete);
pathpanel.setBorder(BorderFactory.createTitledBorder("Path to File"));
pathpanel.add(pathtofile);
f.setSize(new Dimension(650, 400));
f.setBackground(Color.white);
f.setResizable(true);
ippanel.setBorder(BorderFactory.createTitledBorder("SAVSE IP Address"));
ippanel.add(iptext);
outputpanel.setBorder(BorderFactory.createTitledBorder("OUTPUT"));
outputpanel.add(outputarea);
portpanel.setBorder(BorderFactory.createTitledBorder("ICAP Port"));
portpanel.add(porttext);
// outpathpanel.setBorder(BorderFactory.createTitledBorder("Path to Repair File"));
// outpathpanel.add(pathtooutfile);
lpanel.add(ippanel);
rpanel.add(outputpanel);
lpanel.add(portpanel);
lpanel.add(buttonpanel);
lpanel.add(pathpanel);
// lpanel.add(outpathpanel);
lpanel.add(filechooser);
lpanel.add(scanbutton);
f.add(lpanel);
f.add(rpanel);
f.setVisible(true);
public static void main(String[] args) {
clienttester g = new clienttester();
g.display();
d)     my2.java – This is the class file I wrote to test that I am able to send a file and scan it and see the output in the JDEVELOPER. In this case the file is stored on the filesystem of the client machine. JDEVELOPER should be able to see the file.
NOTE:
“EICAR.com” is the test file downloaded from Symantec site to test a non malicious virus file. I n order to be able to test it like this, the Antivirus program running on your machine should be disabled, or else Antivirus will kick in and delete the file. In the first place you will not be able to download the test virus file either with anti virus running on the machine you are downloading to.
package com.av;
import java.io.*;
public class my2 {
static int my_return = 0;
* @param fileBytes
* @param fileName
* @return
public static int scanfile(String fileName){
String avMode = "SCAN";
boolean scan = avMode.startsWith("SCAN");
String avServer = "xx";--avserver ip address
int avPort = 1344;
int the_return = 0;
if (scan) {
AVClient avc = new AVClient(avServer,avPort,avMode);
the_return = avc.scanfile(fileName);
if (the_return == -1) {
return (the_return);
} else
return (the_return);
//my_return = the_return;
return (the_return);
public static void main(String[] args) throws Exception {
System.out.println("Hi there in Main");
byte[] b1 = new byte[4];
b1[1] = 68;
my_return = scanfile("c:\\eicar.com");
System.out.println(my_return);
e)     Then finally we have my1.JAVA, which takes the filename, and it’s contents in the bytes form and scans the file. The reason for this method is we are not storing the file on the filesystem, it is read into the memory and only if it is clean, it is put into the database or else notify the user.
package com.av;
import java.io.*;
public class my1 {
static int my_return = 0;
static int a_length = 0;
* @param fileBytes
* @param fileName
* @return
public static int scanfile(String fileName,byte[] fileBytes) throws IOException {
String avMode = "SCAN";
boolean scan = avMode.startsWith("SCAN");
String avServer = "xxx";--avserver’s ip address
int avPort = 1344;
int the_return = 0;
if (scan) {
AVClient avc = new AVClient(avServer,avPort,avMode);
// File file = new File(fileName) ;
//byte[] fBytes = getBytesFromFile(file);
the_return = avc.scanfile(fileName, fileBytes);
if (the_return == -1) {
return (the_return);
} else
{return (the_return);}
my_return = the_return;
return (the_return);
// Returns the contents of the file in a byte array.
* @param file
* @return
* @throws IOException
public static byte[] getBytesFromFile(File file) throws IOException {
InputStream is = new FileInputStream(file);
// Get the size of the file
long length = file.length();
// You cannot create an array using a long type.
// It needs to be an int type.
// Before converting to an int type, check
// to ensure that file is not larger than Integer.MAX_VALUE.
if (length > Integer.MAX_VALUE) {
// File is too large
// Create the byte array to hold the data
byte[] bytes = new byte[(int)length];
// Read in the bytes
int offset = 0;
int numRead = 0;
while (offset < bytes.length
&& (numRead=is.read(bytes, offset, bytes.length-offset)) >= 0) {
offset += numRead;
// Ensure all the bytes have been read in
if (offset < bytes.length) {
throw new IOException("Could not completely read file "+file.getName());
// Close the input stream and return bytes
is.close();
return bytes;
// public static void main(String[] args) throws Exception {
//System.out.println("Hi there in Main");
// File file = new File() ;
// byte[] b1 = getBytesFromFile(file);
//System.out.println(b1);
// my_return = scanfile(,b1);
//System.out.println(my_return); }
Finally , you have the exceptions file,
e) package com.av;
public class VirusException
extends Exception {
public VirusException() {
super();
public VirusException(String text) {
super(text);
Once you have all these classes, you can use JDEVELOPER , to load these classes into the database: This is as follows:
Right click on the project, which has all these classes.
NEW -> deployment profiles -> load java and stored procedures.
When you are created deployment profile, you have to specify,
Loadjava options.
-f, -v (check the check boxes)
Under privileges:
-s – specify database schema these classes are loaded into
-s – create sysnonym check box
-g – grant to public or any specific users per your policy.
Under Resolver,
-r and –o (check the check boxes)
I accepted the default name storedproc1. Then you right click on the storedproc1.deploy, deploy to whichever database connection you created.
And then, In order to access this java class we need a pl/sql wrapper as follows:
create or replace package my1 is
function mycheck (pfilename in varchar2, psize in number)
return number;
end my1;
create or replace package body my1 is
     function mycheck (pfilename in varchar2, psize in number)
return number is
language java
     name 'com.av.my1.scanfile(java.lang.String, byte[]) return int';
     end my1;
And the code is invoked from sql plus as follows:
Select my1.mycheck(“filename”, “filebytes”) from dual;
One important catch in the above method is to send the filename and filecontents in bytes form. In order to send the file contents as filebytes, you will need another java class and load into the data base as described above.
import java.io.File;
import java.io.FileInputStream;
import java.io.IOException;
import java.io.InputStream;
* This program demonstrates how to read a file into a byte array. This method
* reads the entire contents of the file into a byte array.
* @version 1.0
* @author Jeffrey M. Hunter ([email protected])
* @author http://www.idevelopment.info
public class ReadFileIntoByteArray {
* method to convert a byte to a hex string.
* @param data the byte to convert
* @return String the converted byte
public static String byteToHex(byte data) {
StringBuffer buf = new StringBuffer();
buf.append(toHexChar((data >>> 4) & 0x0F));
buf.append(toHexChar(data & 0x0F));
return buf.toString();
* Convenience method to convert an int to a hex char.
* @param i the int to convert
* @return char the converted char
public static char toHexChar(int i) {
if ((0 <= i) && (i <= 9)) {
return (char) ('0' + i);
} else {
return (char) ('a' + (i - 10));
* Returns the contents of the file in a byte array
* @param file File this method should read
* @return byte[] Returns a byte[] array of the contents of the file
private static byte[] getBytesFromFile(File file) throws IOException {
InputStream is = new FileInputStream(file);
System.out.println("\nDEBUG: FileInputStream is " + file);
// Get the size of the file
long length = file.length();
System.out.println("DEBUG: Length of " + file + " is " + length + "\n");
* You cannot create an array using a long type. It needs to be an int
* type. Before converting to an int type, check to ensure that file is
* not loarger than Integer.MAX_VALUE;
if (length > Integer.MAX_VALUE) {
System.out.println("File is too large to process");
return null;
// Create the byte array to hold the data
byte[] bytes = new byte[(int)length];
// Read in the bytes
int offset = 0;
int numRead = 0;
while ( (offset < bytes.length)
( (numRead=is.read(bytes, offset, bytes.length-offset)) >= 0) ) {
offset += numRead;
// Ensure all the bytes have been read in
if (offset < bytes.length) {
throw new IOException("Could not completely read file " + file.getName());
is.close();
return bytes;
* @param filename
public static byte[] chk_file(String filename) {
byte[] fileArray = null;
try {
fileArray = getBytesFromFile(new File( filename));
} catch (IOException e) {
e.printStackTrace();
if (fileArray != null) {
for (int i=0; i<fileArray.length; i++) {
System.out.println(
"fileArray[" + i + "] = " +
((int)fileArray[i] < 9 ? " " : "") +
( ((int)fileArray[i] > 9 && (int)fileArray[i] <= 99) ? " " : "") +
fileArray[i] + " : " +
" HEX=(0x" + byteToHex(fileArray) + ") : " +
" charValue=(" + (char)fileArray[i] + ")");
return fileArray;
* Sole entry point to the class and application.
* @param args Array of String arguments.
public static void main(String[] args) {
byte[] fileArray = null;
try {
fileArray = getBytesFromFile(new File("c:\\eicar.com"));
} catch (IOException e) {
e.printStackTrace();
if (fileArray != null) {
for (int i=0; i<fileArray.length; i++) {
System.out.println(
"fileArray[" + i + "] = " +
((int)fileArray[i] < 9 ? " " : "") +
( ((int)fileArray[i] > 9 && (int)fileArray[i] <= 99) ? " " : "") +
fileArray[i] + " : " +
" HEX=(0x" + byteToHex(fileArray[i]) + ") : " +
" charValue=(" + (char)fileArray[i] + ")");
Having main method helps you to run the file in JDEVELOPER or using JAVA.
DO not forget to load this class into the database.
And you create the pl/sql wrapper again as follows:
create or replace FUNCTION TOBY (pfilename in varchar2) RETURN VARCHAR2 iS
language java name
'ReadFileIntoByteArray.chk_file(java.lang.String) return byte[]';
And you call the function from sqlplus as follows:
Sql>Set serveroutput on size 20000;
Sql> call dbms_java.set_output(20000);
Sql> Select toby(“filename”) from dual; --
this file should be accessible, I mean you will not be able to send a file on your pc, from sql plus as sql/plus is running on your db server.
You will be able to see the output in sql plus:
If you are running it from the APEX:
When we use file browser widget from APEX, the file is stored in APEX_APPLICATION_FILES table. And we retrieve that into a variable and pass this variable to the function as follows:
DECLARE
scan_failed EXCEPTION;
x varchar2(400);
z number;
BEGIN
select filename into x from wwv_flow_files where name = :P1_FILE_NAME;
select my1.mycheck(x,toby(x)) into z from dual;
if z = 0 then
:P1_SUBJECT:= 'PASSED';
else
:P1_SUBJECT:= 'FAILED';
end if;
:P1_SCAN_RESULT := '** Scanning File **';
IF UPPER(:P1_SUBJECT) = 'PASSED' THEN
BEGIN
:P1_SCAN_FLAG := 'PASSED';
:P1_SCAN_RESULT := :P1_SCAN_RESULT || ' ** File passed scan **';
END;
ELSIF UPPER(:P1_SUBJECT) = 'FAILED' THEN
BEGIN
:P1_SCAN_FLAG := 'FAILED';
:P1_SCAN_RESULT := :P1_SCAN_RESULT || ' ** File failed scan **';
END;
ELSE
BEGIN
:P1_SCAN_FLAG := 'UNKNOWN';
:P1_SCAN_RESULT := :P1_SCAN_RESULT || ' ** Scan Is Not Conclussive **';
END;
END IF;
--IF :P1_SCAN_FLAG = 'FAILED'
-- THEN RAISE scan_failed;
--END IF;
EXCEPTION
WHEN OTHERS THEN
DELETE from APEX_APPLICATION_FILES WHERE name = :P1_FILE_NAME;
RAISE_APPLICATION_ERROR (-20000, 'seb OTHERS error encountered - file upload not allowed. Possible virus detected !');
raise;
END;
ACKNOWLEDMENTS:
1) JOHN SCOTT – who suggested this ICAP API in one of the threads which is my initial starting point in this direction.
2) VLAD KOFMAN who wrote the article on WWW.DEVELOPER.com
3) Mr. KIRAN –One of the engineers from Metalink, who helped me at every step of getting this java programs and pl/sql wrappers working. But for him, I would have not completed my project.

How do i scan multiple pages for one attachment

I know how to scan but I don't know how to scan multiple pages for one attachement....Help please

Hi dagda24,
You can scan multiple pages into a single document with the scan to PDF option. Use the following steps to do so:
1. Open MP Navigator.
2. Click One Clcik.
3. Click Save to PC.
4. Change the File Type from PDF to PDF (multiple pages).
5. Make any other changes as needed, then click scan.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

ITunes 10.6.3 Mac running 10.7.3 not responding I have deleted iTunes and reinstall iTunes and it keeps happening I also scanned the computer for any trojans and any other possible viruses but the pc is running perfect waft do I do ? Please help me ?

I need help iTunes 10.6.3 Mac running 10.7.3 not responding I have deleted iTunes and reinstall iTunes and it keeps happening I also scanned the computer for any trojans and any other possible viruses but the pc is running perfect waft do I do ? Please help me ?

Hey thanks for replying.
Here's what I did:
First I tried the Winsock reset in the Command prompt. Nothing changed.
Next, I tried the instructions on http://http://support.apple.com/kb/TS4123. The only other program that came up on the 'Winsock Providers' tab on the program was 2 Windows Live applications, which I can do without. So I deleted all Windows Live Applications.
I did the Winsock reset in the Command Prompt again and rebooted my comp.
Unfortunately, nothing has changed. iTunes keeps freezing at various stages of the sync, then shows the candy cane-striped bar with either the words 'Finishing sync' or 'Cancelling sync', before showing the Apple logo.
Sometimes, iTunes gets to the syncing stage - "Copying # of ####" - where it will trudge through the first, second and third tracks before flashing "Copying 4 of ####" for a split second and I catch "Cancelling sync" briefly before the Apple logo appears.
Again, I've repeated the steps I mentioned in my previous post. Does ANYONE know when the new version of iTunes is set to be released?! This one is driving me INSANE, to say the least!!

There is Red Icon at the top bar and it says I have a virus and things keep popping up saying I have a virus and need to do a scan and pay for some sort of software to complete the scan, someone told me that this is a virus in. How do I get rid of it?

There is Red Icon at the top bar and it says I have a virus and things keep popping up saying I have a virus and need to do a scan and pay for some sort of software to complete the scan, someone told me that this is a virus in. How do I get rid of it?

This could well be the notorious Mac Defender - which is an annoying program that tricks you into thinking that your Mac is infected with a virus, when the only infection is Mac Defender itself.
When surfing the web never EVER click on a link that says "Free anti-virus scan" or "Scan now" - they are nearly always scams which will end up infecting your computer. Although Macs are resistant to viruses, they're not resistant to user stupidity.
If you Google "Mac defender" then you'll find plenty of sites with instructions on how to remove this minor nuisance. Take this as a warning that you need to be more careful in your surfing habits.
Bob

Scanning in pics for a Pictorial DVD advice?

Similar Messages

Maybe you are looking for