Scanning large photo positive on 9000F Mark II

I'm attempting to scan a 6" x 1" photo positive on a 9000F Mark II at 9600 dpi using ScanGear.
I get an error message when I his the "Scan" button:
"Scanning cannot be performed unless the crop size,
output size or output resolution is reduced to
10208 x 14032 pixels or less."
Is there some setting that I am missing that will allow me to scan a larger photo pos. at this resolution?
Thank you.

Hi Riley!
So that the Community can help you better, we will need to know the computer operating system you're using (Windows XP/Vista/7/8 or Mac 10.x). Any error messages or other details you'd like to give will also help the Community better understand your issue.
Thanks and have a great day!

Similar Messages

Question about the Canon 8400F and scanning large photo albums

Hi,
Besides scanning negatives, slides, and individual photos, I will be visiting one of my relatives who is the "keeper" of some big family photo albums. If I recall correctly, the albums are pretty large and there are quite a few pictures on each page. I think (?) the pictures are permanently on the pages. Will this be a problems scanning the pictures in?
I think the albums are about the width of a full size keyboard and about twice the heigth.
Any help here would be appreciated. I do hope the pages can be individually removed one at a time from the album, but I do think that the pictures are permanently attached to the pages.
Thank you very much
Also, how good is the instruction booklet that comes with the scanner?
Thanks again

Will this be a problems scanning the pictures in?<<<</div>
Your only problem will be in positioning the album on the scanner. The included CanoScan software allows you to scan in multiple photos and the software automatically separates them.
Also, how good is the instruction booklet that comes with the scanner?<<<</div>
Who reads instructions? We're Mac owners!

My computer has some serious problems, my iphoto only shows thumb size pics when I try to open them, i tried to rebuild my files from folders that had the pics in them. originally all the photos has a large delta with a question mark. also I can't back up

my computer has some serious problems, my iphoto only shows only shows thumb size pics when I try to open them, i tried to rebuild my files from folders that had the pics in them. originally all the photos had a large delta with a question mark. also I can't back up the library file because its not there. I went to time machune and tried to find the file but I can't find it or I am looking in the wrong place. I also lost my Idvd file, only have broken chain showing.

Details please
What version of iPhoto and of the OS?
i tried to rebuild my files from folders that had the pics in them.
Exactly what did you do and how did you do it? this ay be the cause of your issue but without details we can n=ony guess
my iphoto only shows only shows thumb size pics when I try to open them,
where do you see htis? In the iPhoto window? what does "try to pen them" exactly mean?
originally all the photos had a large delta with a question mark.
Ok - this usually has a simple solution - do you still have a copy of the library that has this problem?
also I can't back up the library file because its not there.
This makes no sense at all - all of your previous statements indicate that you do have an iPhoto library but have some problems with it
By default your iPHoto library is located in your Pictures folder and is named iPhtoo library - if tha tis not the case the you have moved or renamed it and only you know what you did until you tell us the details
I went to time machune and tried to find the file but I can't find it or I am looking in the wrong place.
Again unless you actually share what and how you are doing thing but continue to simply state abstract problems it is no possible to assist you - details on using Time Machine are here -- http://support.apple.com/kb/HT1427?viewlocale=en_US&locale=en_US -- and -- http://pondini.org/TM/FAQ.html ---
I also lost my Idvd file, only have broken chain showing.
This would be better addressed in the iDVD forum - but again unlesss yu share detailed information no one can assist
LN

Yosemite not recognizing .jpg from Canon 9000F Mark II

Since upgrading to Yosemite, when I scan a photo with my Canon Canonscan 9000F Mark II, the file is not recognized as a .jpg file, either in preview or Photoshop. Has anyone seen this and know an answer?
Thanks.

It also does the same thing for me. Same scanner, using Yosemite, the resulting .jpg file results, when trying to open it, in an error that says, "It may be damaged or use a file format that Preview doesn't recognize." There is no new driver for the scanner, and what about Yosemite would cause it not to recognize a .jpg file anyway?

CanoScan 9000F Mark II: HP or Dell what graphics card etc are needed to use the 9000F?

My computer is not up to snuff to handle the 9000F scanner. I am shopping for an HP or Dell unit. What should I look for in the details to be able to select one that is adequate or better. Sometimes a graphics card is indicated and I don't know which can do what though I know the one I have can't do it. What about processors an i5 or i7 intel can do it I think?. What hard drive capacity is required or recommended? I am not a techie but would like to be able to purchase something that will get the job done. I shall be scanning many slides, negs and photos. Thanks

Hi EddS,
The system that the CanoScan 9000F Mark II will be installed on will need to meet the following minimum requirements:
OS Requirements (any OS listed below)
Windows® 8, Windows® 7, Windows Vista®, Windows XP and Mac OS® X v10.6.8 to 10.9
Power Requirements
AC 100-240V, 50/60 Hz
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Help please: Large photos do not appear in album...

I am having difficulty viewing the large photos in iphoto. All of the photos appear in the "thumbnail size", but when i want to view them "screen size", only the small size photos appear - when i try to view a larger photo, nothing but white screen...is there a "blanket approach" i can apply that wil let me view all my photos? i have about 4000 photos scanned, large and small.
Thank you in advance.

Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

How can I create only thumbnails photo page without larger photo

Is there a way to create photo page without the larger photo?

I wonder if you can use a photo template page to drop your photos into and then just leave off the slideshow button. I wonder if that will disable the click to enlarge photo function or if it just affects the slideshow stuff.
Otherwise, you could manually make your thumbnails page...like a contact sheet.
1. Use something like iPhoto to export photos scaled down to thumbnail size, like 100x133, into a folder on the desktop
2. Drag and drop thumbnails from this folder into iWeb using blank template page.
3. select all the thumbnails, open up the Inspector ruler tab, click on "Use orignal size".
4. Arrange thumbnails in desired order and position on page.
This is a complete manual job. I don't know if there is any other way besides disabling the slideshow function. I would probably live with the "click to enlarge" function over making a contact sheet by hand.

No color when scanning a photo

I cannot seem to scan color photos to my Mac, everything is in grey scale and I have no idea how it happened or how to correct it. I am using an IMAC 3.2

Okay, took a bit to find it, but I think this is it:
For Mac OSX 10.9 It's around the 0:57 mark in the video... the drop down field "Kind" has to be selected as "Color"
*** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***

HP scanjet tma Regulatory model FCLSD - 0508 for scanning of photo nagaives.

Hello,
I had hp scanjet tma regulatory model fclsd - 0508 for scanning of photo nagaives. and it Sr No : [Personal Information Removed]
Can you give the driver and setup program for this scanner.
- Nehal Joshi

I would like to help in this case, but I need a little bit more information.
Can you provide me with the Product Number of the HP Scanjet model that you have? I would need this information to be able to direct you to the correct product support page.
It may also be useful to know the operating system of the PC that will be connected with the Scanjet.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

How do I scan a photo to a file and then send the file as an attachment via email.

How do I scan a photo to a file and then send the file as an attachment via email.

All of this depends largely on what printer /software you have, which Email client you use and to some extent which OS you are running.
Most HP printers have HP Solution Center which is used to set up scanning,choosing where to save,etc. Once a file/photo is scanned and saved to the folder, open the folder.Select the file and at the top of the window should be the option to 'Email'.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Is it possible to scan a photo on the HP

Is it possible to scan a photo on the HP Officejet 5610xi, upload it to a Mac, & then as an email attachment?

Hello,
Thanks for the post. With this one, you do have some options. I've included some links below to documents that will assist in stepping you through this. Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02456650&tmp_task=useCategory&cc=us&dlc=en&lang... (Scanning)
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01910186&tmp_task=useCategory&cc=us&dlc=en&lang... (Scanning)
http://www.youtube.com/watch?v=FfZcFtHfhoc (utube attaching to an email)
http://www.youtube.com/watch?v=gHpMK1PKYSA (utube attaching to an email)
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Problem with interface between Photoshop and CanoScan 9000f, mark II

I have just upgraded my Mac to OS X 10.9.1, Photoshop to CC, and purchased the CanoScan 9000F, mark II. I had the CanoScan 8600F previously which came 8+ years ago with Elements 4 but now all this is obsolete with the current software and OS. In Photoshop Elements 4 and the old scanner, I could go to the File menu, select "Import" and find the scanner listed, going then directly to the Canon ScanGear interface to use to scan images. This is not currently happening with the new software and scanner. Under the File menu now I now only see "Images from device..." which takes me to another much less useful interface with the scanner. How can I get Photoshop to again connect directly to the ScanGear interface?

How can I get Photoshop to again connect directly to the ScanGear interface?
AFAIK, you cannot.
The direct connection required the less-than-reliable TWAIN plugin to access the manufacturer's scanner driver which was usually 32 bit only. Photoshop CC is going 64 bit only (it's there already on Macs) so Adobe has removed TWAIN from CC entirely.
http://helpx.adobe.com/photoshop/kb/twain-plug-photoshop-cs4-cs5.html
http://forums.adobe.com/thread/1245120
Additionally, when in use, TWAIN requires exclusive access to Photoshop so you cannot do anything else while scanning is occurring.
Adobe recommends scanning outside Photoshop (using a 3rd party utility such as Vuescan http://www.hamrick.com/). You can then scan (with Vuescan) and use Photoshop simultaneously. Then import the scanned image into PS CC.

Multiple scanning of photos

Soooooo, since I've learned that my Officejet 4500 and other printers with the "newer" drivers don't scan multimple photos and separate them out as my old HP Officejet J6480. My question now is -
IS THERE A HP SCANNER/PRINTER THAT WILL DO THIS EFFICIENTLY?? or do I have to go over to Cannon or Lexmark or somethiing?
And, no --- the odd - break-it-apart 'solution' offered is not what I call efficent. I wan'na stick'em on the glass, and pick them up the way I used to.
Rosalind
HP Customer since '1995

Thanks for your feedback.
This feature has been implemented in 2013/2014 HP Printers, where you can scan multiple photos at a time.
Some of the models I remember
HP ENVY 4500 e-All-in-One Printer
HP Officejet 4630 e-All-in-One Printer
Officejet 8620/30/50
All HP's latest printers support this feature
Click on the "Thumbs up"button on the left to say "Thanks"
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

How do I remove a white film on a photo after scanning the photo?

How can I remove a white film on my photos after scanning the photos?

Can you post the photo so we can see what you are talking about.
Not sure of this is the same as what you have, but when I scan DVD Covers for my DVD Cataloguing program I'm too lazy to take them out of their slipcases. The scans always look a bit milky, because of the plastic, but I've found that Enhance> Auto Smart Tone is ideal for fixing them. And because of the Learning feature of Smart Tone it usually puts them right the moment I select the option.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Before when I scanned a photo, it would automatically save and ask to scan another photo. Now, the photo is not saving and it doesn't ask to scan again. Help?

Before when I scanned a photo, it would automatically save and ask to scan another photo. Now, the photo is not saving and it doesn't ask to scan again. Help?

What Scanner and scanware are you using....?
Check out > Mac Basics: Using a scanner
I only use Image Capture and it always sends my photos to wherever I tell it to.

Scanning large photo positive on 9000F Mark II

Similar Messages

Maybe you are looking for