Scanning pages into 1 PDF file
I have a Photosmart Plus B210 Series and a Mac OS X 10.6.6. My problem is that I want to scan more than one page in a single .pdf or .jpeg file and I cannot figure out how to do it. I can only scan one page per document. Anyone have a solution?
I'm not familiar with your model, but for my Photosmart D110, there is a check box after selecting Scan Document in the Solutions Center, then Scan at the bottom of the next window that specifies scanning each page into a different file. This box must be unchecked in order to create multi-page file.
Similar Messages
-
HP Officejet 6500A How do I scan a document with multiple pages into one file?
HP Officejet 6500A Plus e-All-in-One Printer - E710n
Windows 7 (64 bit)
How do I scan a document with multiple pages into one file? My old printer (psc 2110) asked after each scan if I wanted to scan another page. At the end I had one pdf file with multiple pages.
This new one creates one file for each page and I cannot find a way to create one pdf file with multiple pages.
This question was solved.
View Solution.Hi mpw101,
If you load the papers into the ADF - Automatic Document Feeder, and then select Document to PDF then they will all be scanning into one file. Let me know if this works for you?
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution" -
I scan a page to PDF file, but I couldn't to highlight it.
I scan a page to PDF file, but I couldn't to highlight it. I use Adobe Reader, is any way I can use this funtion?
You need run OCR first using Acrobat, then you should be able to highlight text.
-
Spool List more than 99 pages to PDF File to Mail
Hi All,
I want to convert a big spool list (342 Pages) to PDF file to send it by e-mail.
I use the following code to convert my spool to PDF file:
Convert to PDF file*
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = w_spool_id
no_dialog = 'X'
dst_device = c_device
IMPORTING
pdf_bytecount = gd_bytecount
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings*
LOOP AT it_pdf_output.
TRANSLATE it_pdf_output USING ' ~'.
CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
it_mess_att = gd_buffer.
APPEND it_mess_att.
SHIFT gd_buffer LEFT BY 255 PLACES.
IF gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
The problem with the FM 'CONVERT_ABAPSPOOLJOB_2_PDF' is when my spool have more than 99 pages. In this case, the FM generate a backscreen job (sm37) to convert my spool and generate a binary PDF spool.
After this step, the 'FM SO_DOCUMENT_SEND_API1' send an e-mail with the binary PDF File recovered in the spool list but i can't open the file with Adobe Reader because the format is wrong.
Someone knows how could i convert my big spool list to PDF file to send it by e-mail adress ?
Thanks a lot for your precious help that i need so much !Generate big spool list
REPORT ZGEN_SPOOL.
tYPE-POOLS: slis.
TYPES: BEGIN OF str_mara,
matnr TYPE mara-matnr,
ersda TYPE mara-ersda,
ernam TYPE mara-ernam,
laeda TYPE mara-laeda,
aenam TYPE mara-aenam,
vpsta TYPE mara-vpsta,
END OF str_mara.
DATA: i_mat TYPE TABLE OF str_mara,
wa_mat LIKE LINE OF i_mat.
DATA:params LIKE pri_params.
DATA: days(1) TYPE n VALUE 2,
valid TYPE c.
DATA: obj TYPE REF TO cl_salv_table.
SELECT matnr
ersda
ernam
laeda
aenam
vpsta
UP TO 4999 ROWS
FROM mara INTO CORRESPONDING FIELDS OF TABLE i_mat.
TRY.
CALL METHOD cl_salv_table=>factory
IMPORTING
r_salv_table = obj
CHANGING
t_table = i_mat.
CATCH cx_salv_msg .
ENDTRY.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
* destination = 'QAS'
list_name = 'ZTEST_VERTEX'
list_text = 'TEST'
no_dialog = 'X'
immediately = ' '
expiration = days
IMPORTING
* OUT_ARCHIVE_PARAMETERS =
out_parameters = params
valid = valid
* VALID_FOR_SPOOL_CREATION =
EXCEPTIONS
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
OTHERS = 4
IF sy-subrc ne 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
TRY .
NEW-PAGE PRINT ON PARAMETERS params NO DIALOG.
CATCH cx_sy_nested_print_on .
ENDTRY.
CALL METHOD obj->display.
NEW-PAGE PRINT OFF. -
Scaning multiple pages into one file on a 4630
Using HP 4630 printer, windows 8.1, wireless connection.
Want to scan multiple pages into one file.
Per user manual, I work from the computer not the printer.
When first page is scanned am asked if I want to save, I click yes and name file.
When I scan second page am again asked if I want to save, my file name appears, I am told it already exists and asks if I want to keep or replace it.
Whichever one I click, only the second page is saved.
What am I doing wrong?
Question: How do I scan mutiple pages into a single document?
This question was solved.
View Solution.I accept this solution with many thanks! It was so obvious and I didn't see it. The User Manual should mention this.
-
I recently signed up for a one month trial of adobe pro. I logged in. I cannot convert a single page of PDF file to word or Excel with this trial. I just get the request to sign up for a year. What good is the trial if I can't try it?
Hey vcomfort6,
Please ensure that you are using Adobe Acrobat and not Reader to convert PDF file to word or excel.
Could you tell me whether it is a scanned document? Does this happen with all PDFs or any specific one?
Do you get any error message? What exactly happens when you try doing the same?
Hope to hear from you.
Regards,
Anubha -
Save Web page into PDF in Windows 7 32 bit for Adobe 7
When security under Internet options in Internet Explorer runs with "Enable Protected Mode" checked, can not save web page into PDF. The version of Adobe is 7.
NazirAre you saying you cannot print to the Adobe PDF printer or what. You have to be more complete in your description since AA7 will not fully work in Win7. You will have to use workarounds, but knowing what steps you are using is important to giving any help. Just saying save does not help. Of course, you might be able to use the MS plugin for creating PDFs as an alternative if you only have AA7. One thing that you find with AA7 is that PDF Maker will likely not work and also the printer will have to be a print to file, followed with a use of Distiller to complete the PDF creation. The AA7 version of AcroTray that does a lot of the work in the background should not be expected to work with Win 7, thus the need for workarounds.
-
Embedding Full-text Index into PDF File
Hello Everyone,
I've tried to create and embed full-text index into PDF file, but with no luck. I've followed steps described at http://help.adobe.com/en_US/Acrobat/9.0/Standard/WSC28D4DBB-6A78-4027-9E04-F50FE411CFB9.w. html - there can be seen progress of collecting of data and at the end the button Update index is enabled. This is signal for me that Index was created. After clicking on Ok button, saving document as new one and then reopening "new created" document, there is info that no Index is embedded in the Manage Embedded Index dialog. Is there any other step necessary to do? Or is it bug? Adobe Acrobat Pro 9.1 on Windows Vista 32bit is used.
Jan
PS: Interesting is also comment at the bottom of above mentioned help page...Thanks for the response. It is true that if I make changes and look at the embedded index status, it shows that it needs updating
However the problem I can't get around after extensive testing is that sometimes for no apparent reason the index is dropped on save. This can happen if I check the status of the index to make sure it is valid, save the file, and reopen it.
I've concluded that this must be a bug and am using other indexing options for the time being. -
I like to edit single letter in the pdf file having more then 1000 page, Example "T" in place of "V" in all the 1000 pages in pdf file. Please let me know !
In a PDF you can´t change single letter.
You can only try to convert the PDF document into a Word document.
Now you can search and replace a letter. -
In smartform word document convert into pdf file
Hi Experts,
I have issue on smartform, i have done two page smartform in preview its coming properly but
when i give to print its not coming properly...output is not coming properly...so please sugest me
even how to covert smartform word document into PDF file...im waiting for your replay. Thanks in
Advance....
Regards
AshwiniHi,
I hope its printer problem check with u r basis, and for Smartform to PDF bewlow is my coding in which by using OTF data from Smartform it ill veiw in PDF.
*& Report ZSAP_PDF_VIEWER_DEMO_2
REPORT ZSAP_PDF_VIEWER.
DATA: LT_PDF TYPE TABLE OF TLINE,
LS_PDF LIKE LINE OF LT_PDF,
LV_URL TYPE CHAR255,
PDF_FSIZE TYPE I,
LV_CONTENT TYPE XSTRING,
LT_DATA TYPE STANDARD TABLE OF X255.
DATA : L_JOB_OUTPUT_INFO TYPE SSFCRESCL.
DATA : LS_CONTROL_PARAM TYPE SSFCTRLOP.
DATA : G_HTML_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
G_HTML_CONTROL TYPE REF TO CL_GUI_HTML_VIEWER.
DATA: LO_DIALOG_CONTAINER TYPE REF TO CL_GUI_DIALOGBOX_CONTAINER.
DATA: LO_DOCKING_CONTAINER TYPE REF TO CL_GUI_DOCKING_CONTAINER.
DATA : P_VBELN TYPE VBELN_VL.
FIELD-SYMBOLS <FS_X> TYPE X.
INITIALIZATION.
LS_CONTROL_PARAM-GETOTF = 'X'.
LS_CONTROL_PARAM-NO_DIALOG = 'X'.
START-OF-SELECTION.
CALL FUNCTION '/1BCDWB/SF00000034'
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS = LS_CONTROL_PARAM
P_VBELN = P_VBELN
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO = L_DOCUMENT_OUTPUT_INFO
JOB_OUTPUT_INFO = L_JOB_OUTPUT_INFO
JOB_OUTPUT_OPTIONS = L_JOB_ OUTPUT_OPTIONS
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
IMPORTING
BIN_FILESIZE = PDF_FSIZE
TABLES
OTF = L_JOB_OUTPUT_INFO-OTFDATA
LINES = LT_PDF
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
OTHERS = 4.
convert pdf to xstring string
LOOP AT LT_PDF INTO LS_PDF.
ASSIGN LS_PDF TO <FS_X> CASTING.
CONCATENATE LV_CONTENT <FS_X> INTO LV_CONTENT IN BYTE MODE.
ENDLOOP.
CALL SCREEN 100.
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS '100'.
**CREATE OBJECT LO_DOCKING_CONTAINER
EXPORTING
REPID = SY-REPID
DYNNR = '100'"SY-DYNNR
SIDE = LO_DOCKING_CONTAINER->DOCK_AT_LEFT
EXTENSION = 1200.
CREATE OBJECT g_html_container
EXPORTING
container_name = 'HTML'.
*CREATE OBJECT G_HTML_CONTROL
EXPORTING
PARENT = LO_DOCKING_CONTAINER.
CREATE OBJECT G_HTML_CONTAINER
EXPORTING
CONTAINER_NAME = 'HTML'.
CREATE OBJECT G_HTML_CONTROL
EXPORTING
PARENT = G_HTML_CONTAINER.
Convert xstring to binary table to pass to the LOAD_DATA method
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
BUFFER = LV_CONTENT
TABLES
BINARY_TAB = LT_DATA.
*application/
Load the HTML
CALL METHOD G_HTML_CONTROL->LOAD_DATA(
EXPORTING
TYPE = 'application'
SUBTYPE = 'pdf' "
IMPORTING
ASSIGNED_URL = LV_URL
CHANGING
DATA_TABLE = LT_DATA
EXCEPTIONS
DP_INVALID_PARAMETER = 1
DP_ERROR_GENERAL = 2
CNTL_ERROR = 3
OTHERS = 4 ).
CALL METHOD G_HTML_CONTROL->show_url
EXPORTING url = lv_url
in_place = 'X'
EXCEPTIONS cntl_error = 1.
ENDMODULE. " STATUS_0100 OUTPUT
MODULE user_command_0100 INPUT.
DATA ok_code LIKE sy-ucomm.
MOVE sy-ucomm TO ok_code.
CASE ok_code.
WHEN 'BACK' OR 'EXIT'.
CALL METHOD LO_DOCKING_CONTAINER->free.
CALL METHOD g_html_control->free.
LEAVE TO SCREEN 0.
WHEN OTHERS.
ENDCASE.
ENDMODULE. " USE -
Converting pictures into PDF files
How do I convert pictures into PDF files, is this possible?
If you want to use acrobat reader, you have to pay for it.
So, I use other free or cheap apps to do so =>
* powerpdf
* dragonprinter (draakprinter in dutch)
* writepdf
* scanapp (to convert parts of a picture)
I even think that almost every scan-app can convert pictures into pdf's. -
How can i scan to a pdf file using hp officejet 4500 scan feature
how can i scan to a pdf file using hp officejet 4500 scan feature. only give a jpg or bit extension
pf1tarac wrote: how can i scan to a pdf file using hp officejet 4500 scan feature. only give a jpg or bit extension
Hello pf1tarac, I don't believe that is possible. In order to create a PDF file, you would need Adobe Acrobat or some other PDF compatible product to save a scan to the PDF format.
There are some free PDF programs available. Here is a link to one of them.
Please click the White Kudos star on the left, to say thanks.
Please mark Accept As Solution if it solves your problem. -
Urgent: Error while uploading into pdf file
Hi ,
I got a requirement that converting smartform into pdf file and sending into application server, And uploading the that pdf file into presentation server once a day am geting error when uploading into pdf format from application server .
Error : There was an error while tryinging to parse an image.
Please help me out its urgent.
Thanks in advance
Regards
krishna
Edited by: krishna rao on Feb 13, 2008 12:05 PMU can use this code
Reward if useful
REPORT ZMN_PDF_UPLOAD.
data: begin of itab occurs 0,
field(256),
end of itab.
data: dsn(100) value '\usr\sap\DEV\DVEBMGS00\work\testpdf',
length like sy-tabix,
lengthn like sy-tabix.
call function 'GUI_UPLOAD'
exporting
filename = 'c:\temp\test.pdf'
filetype = 'BIN'
importing
filelength = length
tables
data_tab = itab.
open dataset dsn for output in binary mode.
loop at itab.
transfer itab-field to dsn.
endloop.
close dataset dsn.
clear itab.
refresh itab.
*To crosscheck if it went well
open dataset dsn for input in binary mode.
do.
read dataset dsn into itab-field.
if sy-subrc = 0.
append itab.
else.
exit.
endif.
enddo.
call function 'GUI_DOWNLOAD'
exporting
filename = 'c:\temp\testn.pdf'
filetype = 'BIN'
bin_filesize = length
importing
filelength = lengthn
tables
data_tab = itab.
*Or
*Use the TCode
*CG3Z or CG3Y
*for downloading to Application Server. -
How to enable commenting into pdf files using java?
Hi All,
Is there any way available to enable comments into pdf files through java. I have a Adobe Reader 9 and also I want put some comments into pdf file, but the reader is not allowed to place a comment into pdf file before enabling the Comments into pdf. After enabling the comments in pdf file then only we can place the comments and we can the pdf file with comments.
Is there any way available to enable comments into pdf file to view acrobat reader.
Thanks in advance.The end user who uses the web application has Acrobat installed in their mahcine needs it only for the purpose of enabling comments in pdf. If this task of enabling comments in pdf is done through my application there is no need for acrobat in such user's machine which was requested as a cost cuttnig measure.
For this purpose, i need to know about how to enable comments in pdf through java api.
I have used itext java api for other pdf related manipulation in java. But it does not have feature as per the requirement posted above. Can any body suggest relevant java api to achieve the task requested?
Tahnks in Advance. -
Can I insert the image file into PDF file in Adobe X Standard ?
can I insert the image file into PDF file in Adobe X Standard ?
http://matt.coneybeare.me/how-to-make-an-html-signature-in-apple-mail-for-maveri cks-os-x-10-dot-9/
-
Use of XMP Custom Panel to automate insertion of metadata into PDF file.
I'm new to the world of XMP so please bear with me.
I'm exploring ways of automating the insertion of metadata into PDF files, either at the time of creation, or through a batch process. The metadata values for a given set of documents would be static, so these could be "hard coded" into the mechanism use to insert the metadata.
Would an XMP Custom Panel be something I could use to achieve this goal. If so, can you please provide some details on how to go about doing this.
Thanks in advance.
LouisWere you able to find a solution to this problem? I am having the same issue.
Jason
Maybe you are looking for
-
Mouse suggestions for FCP Studio2
Hello, What is the best mouse to use with FCP Studio2 that is compatible with Leopard? Thanks for any and all help.
-
Deviate from Master cost center
Dear All, Can any one plz solve this issue. A position had been assigned to cost center and master cost center.How do we deviate that position from the master cost center? 2). What features do you come across in payrolls employee attributes and CAP P
-
My IPad 2 won't stop saying not charging when plugged in any outlet
My IPad 2 keeps saying not charging when plugged in any outlet
-
HP Pavilion 11 x360 recorded audio gets really loud when silent, like auto adjustment
When I'm talking to friends on Skype, recording a video, or simply recording audio, during silent portions (where I'm not talking) my audio driver software (beats audio) tries to normalize the microphone levels, so it ends up making the background no
-
How can I dowload Encore CS6?
How can I dowload Encore CS6? It dont appears in the desscktop lin of Ceative Cloud even inner Premiere closter.