Scanning problem with HP Laserjet 3050 and Windows 7 64-bit

I understand that to use the HP 3050 with Windows 7 64-bit I must use the Windows Fax and Scan software.  However, if I try to scan using anything greater than a 200 dpi resolution, the document takes forever!  Any workarounds?
Also, was doesn't pdf show up as a document type choice?

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at: http://h30499.www3.hp.com/t5/Printing-and-Digital-Imaging/ct-p/bsc-412
I hope this helps!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

  • Problems with HP Laserjet CM1017 and Windows 8.1

    I have a HP Laserjet CM1017 MFP printer and I just upgraded from Windows 8 to Windows 8.1.
    Now when I go to Control Panel/Devices and Printers/Adjust Print Options, I get an error message:
    "Function Discovery Print Provider DII has stopped working"
    I also get this message:
    "Function address 0x11272fc8 caused a protection fault. (exception code 0xc0000005)  The application property sheet page(s) may not funtion properly."
    How do I fix these errors?

    @tenkeypro 
    First, I would suggest you uninstall the exsisting driver and reinstall following one of these documents to see if it will clear this error message:
    Install HP print and scan software on a Windows 8 computer (32-bit and 64-bit)
    Universal Print Driver (no scan)
    Driver support included in Windows 8 / Windows 8.1 or in Windows Update
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

  • Problem with HP Laserjet 6L and Windows 7 ( 64 bits )

    Hi.
    I have a new pc, with Windows 7 ( 64 bits ) and when I try to print , nothing happend. 
    Any body could tell me, what happend.  I update the driver following the instrucctions in HP but , nothing happend. I am breacking my head try searching the solutions but I dont know what happend.
    Please. Any body tell me what happend , how is the solution.
    Thanks

    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at: http://h30499.www3.hp.com/t5/Printing-and-Digital-Imaging/ct-p/bsc-412
    I hope this helps!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Problem with HP LaserJet 4L and Leopard

    4L will not print with Leopard except under following circumstances:
    If I unplug the 4L, then replug and reset via Print & Fax preference,
    then, it will print 1 page and stop. Will not print any more until I go through the unplug,replug,reset procedure. Then, I get 1 more page. Etc,etc. The unprinted pages appear in the printer queue. I have used this 4L happily going back through many Mac's to the old Duo. Any ideas?

    I am having a problem with my HP Laserjet 6L. I use PowerPrint's Serial to USB cable. The computer recognizes the driver, but prints garbage. Does anyone know how to fix this?
    With Tiger I used to have the problem where after each print job I would have to unplug the USB cable and plug it into the other USB port. This might be a work around for the other respondants.

  • Problems with Nvidia 320.49 and Windows 8.1

    I am having problems with my HP Envy with windows 8.1... Nvidia driver keeps crashing.
    Took the unit to Best Buy and we determined it was with the 320.49 driver - we are
    able to reinstall it, and it will usually last for a few hours before it fails again.  When
    it fails, the resolution reverts to 1024 x XX... not the 1920 x 1260 when it works
    right... very frustrating, but I need to know if the card needs replacement, or if there
    is a fix from Nvidia... Contacted Nvidia and did not get anywhere with them.... can anyone
    help??

    Thank you for the additional information.
    If it is an HP OEM video card, this is the reason that it is not working with the retail nVidia driver.  HP has their motherboards and video cards made to their specs.  Only the drivers developed by them will work with their cards.
    Here are the drivers available for Win 8.1 on the Software & driver download page.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Problems with photoshop elements 10 and windows 8

    I bought photoshop elements 10 for my wife last year for Christmas.  She decided not to install it on our old computer because we knew that we were planning to replace the computer this year.  We finally got around to replacing it and the new computer came with Windows 8.  She installed her photoshop on it and she is having problems with it.  I'm wondering if there is a compatability problem with the windows 8?  Is there an update for the pse 10 that will make it work with windows 8?

    PSE10 is said to be compactable with windows8. What kind of problem are you facing? Did you try launching after resetting preferences? to know more about reseting preferences, check http://helpx.adobe.com/photoshop-elements/using/undo-redo-cancel-actions.html#restore_defa ult_preferences

  • Problems with Nvidia GeForce 210 and windows 8.1

    Hi all, I have Windows 8.1 Pro update 1 64bit installed, two weeks ago I started giving problems graphics card NVidia (even has me
    given several blue screen).
    I tried to update the drivers for the card but I got the same problem. It was working properly with generic
    drivers, and if I went to Computer Administrator me a yellow triangle appeared
    on my graphics card and the properties told me the following:
    Windows has stopped this device because it has reported problems.
    (Code 43 )
    My machine is as follows:
    Mainboard : Asus P5K SE
    Chipset: Intel P31/P35
    Processor : Intel Core 2 Quad Q6600 @ 2400MHz
    Physical Memory : 3072MB (3 x 1024 DDR2- SDRAM)
    Video Card : NVIDIA GeForce 8500 GT
    Hard Disk : Seagate ST3320620AS ATA Device (320GB )
    Monitor Type: LG Electronics L1919S
    I just formatted
     the computer from scratch, and
    I still had the same problem with the graphics card,
    so I imagined it would be a hardware problem
    and bought NVIDIA GeForce 210.
    In the end I
    upgraded to Windows 8.1 update 1 with
    the latest drivers for the GeForce 210,
    and after 6 days running everything correctly, a few days ago
    returned to give me problems,
    the screen sometimes freezes and will not
    let me do anything and after a while
    giving me a blue screen and reboots
    me, I suspect that the graphics drivers
    are giving me problems, and I had to
    disable the graphics card and work with
    generic drivers from Microsoft, and even then I
    was restarted once.
    I installed Driver Booster and all the drivers are updated.
    Could
     anyone analyze
    dump files dmp ? Download here 
    I got another dmp:
     C:\Windows\MEMORY.DMP  but it is too heavy.
    Thanks

    yes, I check the dump files
    this cause by graphic card, on which graphic card you reformat your PC and update
    .NET framework maybe cause this driver corrupted
    my suggestion is try using internal graphic card, just for testing
    Just in case you don't believe me, please check this dump file
    * Bugcheck Analysis *
    Use !analyze -v to get detailed debugging information.
    BugCheck 116, {ffffe000d84c4010, fffff800b540be2c, ffffffffc000009a, 4}
    Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for nvlddmkm.sys
    *** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
    Probably caused by : nvlddmkm.sys ( nvlddmkm+9bbe2c )
    Followup: MachineOwner
    1: kd> !analyze -v
    * Bugcheck Analysis *
    VIDEO_TDR_FAILURE (116)
    Attempt to reset the display driver and recover from timeout failed.
    Arguments:
    Arg1: ffffe000d84c4010, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
    Arg2: fffff800b540be2c, The pointer into responsible device driver module (e.g. owner tag).
    Arg3: ffffffffc000009a, Optional error code (NTSTATUS) of the last failed operation.
    Arg4: 0000000000000004, Optional internal context dependent data.
    Debugging Details:
    FAULTING_IP:
    nvlddmkm+9bbe2c
    fffff800`b540be2c 803db68aeeff00 cmp byte ptr [nvlddmkm+0x8a48e9 (fffff800`b52f48e9)],0
    DEFAULT_BUCKET_ID: GRAPHICS_DRIVER_TDR_FAULT
    CUSTOMER_CRASH_COUNT: 1
    BUGCHECK_STR: 0x116
    PROCESS_NAME: System
    CURRENT_IRQL: 0
    ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
    STACK_TEXT:
    ffffd000`8adadbb8 fffff800`b457bfac : 00000000`00000116 ffffe000`d84c4010 fffff800`b540be2c ffffffff`c000009a : nt!KeBugCheckEx
    ffffd000`8adadbc0 fffff800`b457008d : fffff800`b540be2c ffffe000`d760b7f0 ffffe000`d84c4010 00000000`00000001 : dxgkrnl!TdrBugcheckOnTimeout+0xec
    ffffd000`8adadc00 fffff800`b4570582 : ffffe000`d760f540 ffffd000`8adadc60 00000000`00000002 00000000`00000001 : dxgkrnl!ADAPTER_RENDER::Reset+0x1f5
    ffffd000`8adadc30 fffff800`b457b919 : ffffd000`8ada01b0 00000000`00000000 ffffe000`d5ff91a0 ffffe000`d742b000 : dxgkrnl!DXGADAPTER::Reset+0x416
    ffffd000`8adadca0 fffff800`b446cfde : fffff800`b4453c90 ffffe000`d742b000 fffff802`84c1c000 00000000`00000000 : dxgkrnl!TdrResetFromTimeout+0x15
    ffffd000`8adadcd0 fffff800`b4453d1d : ffffe000`d742b000 00000000`00000080 ffffe000`d50b4500 ffffe000`00000000 : dxgmms1!VidSchiRecoverFromTDR+0x1a
    ffffd000`8adadd00 fffff802`84ceb794 : fffff802`84f69a00 ffffe000`d50b4500 ffffd000`8adaddd0 fffff802`84d7337d : dxgmms1!VidSchiWorkerThread+0x8d
    ffffd000`8adadd40 fffff802`84d765c6 : fffff802`84f02180 ffffe000`d50b4500 fffff802`84f69a00 00000000`00000000 : nt!PspSystemThreadStartup+0x58
    ffffd000`8adadda0 00000000`00000000 : ffffd000`8adae000 ffffd000`8ada8000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
    STACK_COMMAND: .bugcheck ; kb
    FOLLOWUP_IP:
    nvlddmkm+9bbe2c
    fffff800`b540be2c 803db68aeeff00 cmp byte ptr [nvlddmkm+0x8a48e9 (fffff800`b52f48e9)],0
    SYMBOL_NAME: nvlddmkm+9bbe2c
    FOLLOWUP_NAME: MachineOwner
    MODULE_NAME: nvlddmkm
    IMAGE_NAME: nvlddmkm.sys
    DEBUG_FLR_IMAGE_TIMESTAMP: 5315b408
    FAILURE_BUCKET_ID: 0x116_IMAGE_nvlddmkm.sys
    BUCKET_ID: 0x116_IMAGE_nvlddmkm.sys
    ANALYSIS_SOURCE: KM
    FAILURE_ID_HASH_STRING: km:0x116_image_nvlddmkm.sys
    FAILURE_ID_HASH: {c89bfe8c-ed39-f658-ef27-f2898997fdbd}
    Followup: MachineOwner
    1: kd> lmvm nvlddmkm
    start end module name
    fffff800`b4a50000 fffff800`b56a8000 nvlddmkm T (no symbols)
    Loaded symbol image file: nvlddmkm.sys
    Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
    Image name: nvlddmkm.sys
    Timestamp: Tue Mar 04 19:07:52 2014 (5315B408)
    CheckSum: 00C20523
    ImageSize: 00C58000
    Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

  • Problem with Clean Access Agent and Windows Updater

    I have a problem with a laptop when using Cisco Clean Access Agent. The agent keeps directing the laptop to get updates from the Windows Update site, but when I have connected the laptop via cable, windows updates tells me there are no updates either essential or optional. The laptop is a Sony VIVO VGN-FJ270 running XP Home Edition SP2 and the Clean Access Agent is version 4.0.2.1
    Any help is appreciated!!

    Verify the allowed hosts in CCA agent.
    Try these link:
    http://www.cisco.com/en/US/products/ps6128/tsd_products_support_series_home.html
    http://www.cisco.com/en/US/products/ps6128/products_qanda_item09186a00803b7a81.shtml

  • Pairing problem with Docs to Go and Windows 7

    First, I'm not sure this is the correct forum. I've setup a new Windows 7 laptop and installed Docuemnts to Go (latest version downloaded, no updates needed). An was able to pair with both my iPhone and my iPad. iTunes syncs fine (but that's using a USB cable). I entered folders and files for Docs to Go to sync (the same ones as on my old laptop running Windows XP). Then Docs to Go desktop couldn't find the iPhone and I needed to pair again.  I have reinstalled the desktop application, double checked Bonjour, both laptop and iPhone are on the same WiFi.  But, I can't pair the two devices to sync my folders and files. Dataviz hasn't been any help - followed all their instructions, e-mailed Tech Support and got a reply that said to do exactly what I told them I did!
    Anyone have this problem? Anyone have a solution? 
    It seems to be a problem with one or the other (desktop application or iPhone app) not communicating via WiFi properly.  I'm assuming that that's a Bonjour issue.
    nlc

    Try disabling your security system's firewall (McAffee, Norton or the like).  You can also try this: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Problems with IS-H*Med and "Windows Vista"

    Hi all:
    I'm having problems with automatic installation of IS-H*Med using a computer with Windows Vista. It doesn't start. I must to install it manually, and when the user request the OCX, it hangs up.
    Any idea?
    Thanks in advance and regards,
    Alejandro Gómez.
    P.D.:  Excuse my bad English.

    Hola Alejandro,
    could you please elaborate on your problem a little bit in detail?
    I suppose, you don't mean the SAP system itself, since as far as I know, it (the application server side) is not supporting Windows Vista at all.
    According to this <a href="https://service.sap.com/sap/support/notes/66971">SAP note 66971</a> only SAPGUI 7.10 supports Windows Vista. Do you use this version of SAPGUI?
    What does not start? SAPGUI? The planning grid?(Which is the only i.s.h.med specific OCX as far as I know).
    Did you open a customer support message for this?
    kind regards,
    anton wenzelhuemer

  • Printing Problem with HP LaserJet 1022 and OS 10.4

    I am having a problem printing one page of a document on my HP LaserJet 1022 with OS 10.4. All other documents seem to be printing fine, but when I try to print one particular page of a 90 page WORD doc, that page consistently comes out with a big black streak across it and it does something to the printer because all the lights start flashing.
    I have powered off, unplugged, reset the printer subsystem, reinstalled the printer driver, and even tried to print on my laptop, and the same thing keeps happening. The document printed for me fine a few weeks ago.
    Any suggestions on a work-around for this or a permanent solution? I really need to print this page on my printer ASAP. Thank you.

    The page looks perfect in preview and as a PDF. I can't print from the PDF, however, because it shrinks the text and expands the margins ...
    Something's fishy. Save as PDF should result a file that looks exactly, precisely, like what you'd get if you printed directly to your printer.
    I suspect your Word document has been corrupted by a few bytes of random data that is causing your printer to go nuts. Try cutting that portion out of the document, and pasting it in a new blank document so you can incrementally isolate the damage.
    This isn't going to be as easy as it sounds, because when the PostScript printer driver encounters the errant code in the Word document, it's essentially telling the printer "now, go to the top of this page, print a nasty black smudge, and then crash." You might have to cut a whole page before and after the suspected corruption. If you're lucky you might be able to cut the portion then paste it right back as "unformatted text". Try that.
    BDAqua wrote:
    I'm not familiar with Word,
    We should all be so fortunate. Word does use the standard OS X Print dialog though.

  • Problem with new firefox tabs and window focus

    Here's a problem that I've had for ages - sometimes it annoys me, other times I can live with it. Right now it's really p***ing me off.  :x
    I have selected 'a new tab in the most recent window' under FF's Preferences->Tabs->Open links from other applications in:, so as an example, if I click on a URL in a mail in Thunderbird, Firefox opens it in a new tab. However, window focus stays on Thunderbird. I run both of them full screen, so although I'm looking at the web page in Firefox, anything I do on the keyboards affects Thunderbird. It affects URLs opened from other apps too e.g. if I open a terminal and do
    firefox www.archlinux.org
    focus stays on the terminal window. The only exception is when firefox is not already running - in that case, firefox launches with focus.
    DE is xfce4, and the system is completely up to date.
    I've done some googling, and AFAICS, nobody else seems to have this problem. Any ideas, anyone?
    TIA.

    Thanks MAC!EK - definitely a useful add-on, but it still doesn't solve my problem. In Tab Mix Plus Options, I have the following selected:
    Links -> Open links from other applications in: New tab
    Events-> Tab Focus -> Focus/Select tabs  that open from: <all>
    However, the behaviour is as before i.e. I click a URL in Thunderbird, it opens in a new tab in Firefox, but window focus stays on Thunderbird. Within Firefox, the newly-opened tab is selected or focussed, but Firefox itself is not.
    Anyway, thanks again. I think I need to keep looking.

  • Printer error with HP Laserjet 6L and Windows 7

    I have an old but still functional HP Laserjet 6L (from the late 1990s), which is connected to a new computer running Windows 7 via USB. Windows 7 found the necessary drivers, but I am having frequent printer errors come up in the Printer queue, and the machine refuses to print. The problem is 'solved' when I restart my PC, and the document then prints. However this is a pain, and I obviously don't want to have to restart every time I want to print.
    I would be very grateful for any advice on this. Thanks.

    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at: http://h30499.www3.hp.com/t5/Printing-and-Digital-Imaging/ct-p/bsc-412
    I hope this helps!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Problem with touchpad using firefox and windows 8.1. I don't have a problem with explorer 11.

    new HP computer with windows 8.1. Firefox does not work well with the touch pad when scrolling . very slow and erratic, most noticeable when using facebook. I don't have this problem when using Internet Explorer 11.
    Old computer had windows 7 and my preference was to use firefox over explore. At this time i'm being forced to use explore and firefox is to aggravating to use.

    Currently Firefox is not available for metro devices.
    However, make sure that the touch features are enabled by searching for "touch" in the about:config entries.
    In order to change your Firefox Configuration please do the following steps :
    # In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear.
    # Click '''I'll be careful, I promise!''' to continue to the about:config page.

  • Rights problem with Acrobat X pro and Windows 8.1

    We have bought a CS6 creative suite, including acrobat X. If we use the acrobat X in cooperation with windows 8.1, then we cannot delete or amend files without needing to save them under another name ....
    If we install the try out of acrobat XI, then we don't have these problems ....
    Message was edited by: WouterGS

    Hello,
    Yes we have done all updates that were still pending.
    After a few day, the acrobat XI gives the same problems ... so I uninstalled the XI try-out and installed the bought X pro version again .... also here all updates have been done ...We really don't know how to solve this ..
    We had the same configuration on a Windows XP and a Windows 7 pc, and there all went without these issues.
    I also have another Laptop with the same configuration Windows 8.1 + XI pro, and there we also don't have the issue ....

Maybe you are looking for