Scanning question with the Canon LiDE 110

Hello, I am trying to scan pictures with the Canon LIDE 110 using Photoshop Elements on a PC. The Get Photos/ from Scanner in Photoshop works great when i have the image set to save as a jpg' but when i set preferences to scan in and save the image as a TIFF, I get a message that says "Software for this Device could not be launched. The device is not connected or busy" What can I do to be able to scan in and save a TIFF?
Thanks, Walter

Hello wtneary.
Unfortunately, we are not familiar with some of the message you described.
However, our MP Navigator program has the ability to save images in TIFF format. Please visit the following link to download the program:
http://www.usa.canon.com/cusa/consumer/products/scanners/photo_scanners/canoscan_lide110#DriversAndS...
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

Canon MP210 troubleshooting..Question must the Canon MP210 have ink to scan?

Canon MP210 troubleshooting..Question must the Canon MP210 have ink to scan? I have a low color cartiage but just want to scan..can I do this? Suggestions helpful

Hello vegasmax.
To temporarily clear the empty ink warning and perform a scan, please hold down the STOP button for 5-7 seconds. This should allow you to scan. If the error remains we would have to advise that the cartridge is replaced.
Please note, the empty cartridge would have to be replaced if you would like to resume printing again.
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Canon LiDE 110 error code: 5,202,52

i just got my brand new LiDE 110 scanner, and i installed the driver and everything was fine except for the error code 5,202,52 keeps showing up. i tried everything i could do, including reinstalling the driver over and over, however, it doesn't work.
my laptop is win7 64-bit home premium. im getting crazy, any one help?

Hi jakehues,
The 5,155,75 error is a generic communications error and unforutnately does not pinpoint the cause. Please make sure that the USB cable that you are using is 6 feet long or shorter. Also, please make sure that the USB cable is connected directly from the CanoScan LiDE 110 to your computer and is not connected to a USB hub or some other device. Please disconnect all other USB devices connected to the computer and then attempt to scan. Are you able to scan?
If not, please try temporarily disabling security software and then attempt to scan, as firewalls and anit virus have been known to cause these type of errors as well.
If you continue to have difficulties, please contact our support group using the following link:
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Problems with using Canon LiDE 210 and OSX 10.7.4

I am getting nowhere with installing the Canon LiDE 210 scanner software on my 2010 MBP. All I get when I try to scan is "insufficient memory". I can scan using Image Capture and with the trial VueScan software so the problem looks as if it is something to do with the Canon software or the way that it installs on the MBP. Has anyone else had a similar problem or can anyone suggest a fix? Many thanks

Hellooo, I realise this thread is a year old and yet I'm having some real difficulty, hopefully this will fall on someones ears...
Firstly I have a mac mini bought recently and running on Mountain Lion 10.8.3 I tried downloading what is apparently the most up to date drvier and mp navigator for use with the CanoScan LiDE 210 meaning, that both the driver and mp navigator are compatible with Mountain Lion. Here is the following link I used that was forwarded to me by Canon:
http://support-asia.canon-asia.com/contents/ASIA/EN/0100434402.html
http://support-asia.canon-asia.com/contents/ASIA/EN/0200153502.html
I install both of the downloads, plug in the scanner, and nothing... no noise, no beep nothing to say that it is on. I try and open the scanner through system preferences-printer/scanner-canoscan icon yet I am then presented with the message; "failed to open a session on this device"
Strange, I call canon back and they do not know what else to suggest apart from all the usual trouble shooting, the type that is very patronising and annoying... did you click the icon and press scan, did you click the install button after downloading the software... the sort of thing that might otherwise result in the beating, of ones own face with the phone
At the end of this call, and after forwarding me a couple more useless links to unworkable downloads they say that it must be the product, and that I should contact the seller for a replacement.
So I do, I contact Amazon, I get my replacement and voila, exactly the same problem.
I even try getting it going using my mbp which is on snow leopard, which means I can use the installation disc that it is packed with it, it makes a noise, it sounds like its turning on but then when I click "open scanner" ... nothing, no option to scan, no acknowledgement of the device other than the icon itself in system preferences.
Does anyone have any experience of this issue, does anyone know how I might resolve it?
Many thanks,
Jeff

Why does my macbook pro often lose connection with the canon mx922?

why does my macbook pro often lose connection with the canon mx922? This happened with the HP printer as well.

This may answer your Bonjour questions:
http://support.apple.com/kb/PH11449
https://www.apple.com/support/bonjour/
Ciao.

Is anyone else having problems with the Canon Online Store?

In the last month or so, I've had one problem after another with the Canon Online Store; from being unable to delete items from the shopping cart; to not being able to add "in stock" items; disappearing Wish Lists; and just now, I tried to add one lens cap to the 6 or 7 items I already had in the Shopping Cart, and they disappeared.
I've called, more than once, and I've written, also more than once, to Canon Support about this, but they ignore what I tell them, and tell me there are no problems with the Online Store. They don't even seem to report to anyone that anyone has complained, because each time is "the first time", even though I've called (more than once) and written (more than once) to them about continuing Online Stores problems.
Is anyone else having problems with the Canon Online Store?
Why does Canon not care to track reported problems with the storefront part of their web-site?
I'm not trying to insult Canon, it's just that I've been a Canon customer for less than 3 months, and the're only batting .333, so far. Canon Support was very quick to respond about a concern I had that a 50mm f/1.4 I had just purchased was authentic or not. In trying to register that lens, I looked up on the Canon web site where to find the serial number. Since my new lens did not have any numbers there, I was concerned I had been sold a fake. But, then Canon Support sent me link to a different online document that showed a few different places where it might be, and there it was.
Is Canon like that with other problems, as well? Or is their "batting" average better than my very limited experience?
I just love my Rebel T5i, and my Canon lenses (from "the Kit brothers of the Cropped Frame coral": EF-S 18-55mm f/3.5-5.6 IS STM, and EF-S 70-300mm f/4-5.6 IS USM; to the "Truly Nifty Fifty", the 50mm f/1.4 USM, [the f/1.8 is just a "thrifty fifty"], and finally, the "Super-Macro" MP-E 65mm f/2.8 1x-5x Macro)!
Regards and Thanks,
Calen
As an old friend used to always say,
"Keep Looking Up!"
Calen

Hi Danny. Thanks for replying.
I only use my desktop PC to access Canon's web site, and I've been using Mozilla Firefox for years. And, yes, it is the latest version. Since Canon REFUSES to support the use of Firefox on it's web site, WHAT BROWSER DOES CANON SUPPORT? WHEN did Canon STOP SUPPORTING Firefox?
I've been told that there are 2 pending orders in my account. Yet, I NEVER placed those orders! WHY CAN'T CANON SEE THAT THIS IS A PROBLEM???
Instead of off-target suggestions, and pasted boilerplate REFUSALS TO EVEN LOOK at this issue, I would prefer it if Canon went "old school", and FIXED THE PROBLEM, in the first place! But, maybe that's a bit too grown up of an answer for you!
"Award-winning" support??? And, just exactly WHAT AWARD did Canon "support" WIN for CONSISTANTLY IGNORING REPORTED PROBLEMS??? The OSTRICH?
Please pull your head out, and FIX this problem, OR YOU ARE THE PROBLEM!!!
Thank you for your "prompt" attention to this matter!
Calen
As an old friend used to always say,
"Keep Looking Up!"
Calen

My audio files no longer sync to the in the 5d in camera audio. It did when I bought the program but no longer does I reinstalled and it still will not sync the files recorded on the H4N with the Canon 5D Mark Ii

My audio files no longer sync to the in the 5d in camera audio. It did when I bought the program but no longer does I reinstalled and it still will not sync the files recorded on the H4N with the Canon 5D Mark II Camera.
The program used to import and transcode the Can 5D footage but no longer does. The program freezes often and looses my projects as well. Hard to make a living when your editing program is on strike!

My audio files no longer sync to the in the 5d in camera audio. It did when I bought the program but no longer does I reinstalled and it still will not sync the files recorded on the H4N with the Canon 5D Mark II Camera.
The program used to import and transcode the Can 5D footage but no longer does. The program freezes often and looses my projects as well. Hard to make a living when your editing program is on strike!

HT4106 Is the IPad connector kit compatible with the Canon Eos 350D digital camera, I can't get it to work. Comes up as device not supported

is the camera connector kit compatible with the Canon EOS 350D digital camera, as I can get it to work

Check what you've got 'Communications' set to on the camera's settings - it needs to be 'Print/PTP', not 'Normal' 'Normal' to 'PTP' :

I am having trouble with the Canon Image browser ex.l

i am having trouble with the canon image browser ex.After sevearl downloads i eventually got past the 80% mark.it is now downloaded.however as soon as I click on it it opens up and then a message comnes upm saying that there is a problem and windows is searching for the problem.it then closes the oprogramme down..Any help would be appreciated

I am having the same problem and have contacted Canon, they've answered me several times with things to try but nothing they've told me to try helps. It looks like they are going shrug, scratch their heads soon and pass the buck to Microsoft or HP my comp make .
I have a Windows 8.1 OS, 64 bit comp.

Image quality with the Canon 5Dmark 2 vs.. The 5Dmark3?

I use Leica lenses on a canon body with an adapter. Is the image quality with the Canon 5Dmark 2 vs.the 5Dmark3 similar? Any reason to get one vs. the other? I like the idea, that I can change the viewfinder screens on the Mk 2. Any overwhelming improvement of the 5Dmark 3 that would warrant consideration? Thanks to those who have used both camera bodies.
Solved!
Go to Solution.

The primary advantage of a Mk3 over the Mk2 is the AF. More points and it can focus with f/8. If your Leica lens is manual focus then you wouldn't care about it. The 5D3 has a little of an advantage in the ISO but not a huge factor. Other than that I'd say IQ is the same.

How well does premiere work with the Canon XH-A1?

I've used premiere for some time now, but the older 6.01/6.5 version. I finally bought a camera based on what folks were saying of the camera, and naively believing "they're all the same when it comes to capture" -- i.e., firewire is firewire, so it's a no brainer.
The camera I bought was the Canon XHA1, and from what I see from a couple of posts, it sounds like Adobe and Canon are far from bed-partners...
I downloaded the trial version /specifically/ to test HD capture with the camera before I spent the big $$$ on the upgrade, but it seems the -one- feature I wanted to actually test has been disabled from the trial, which makes it rather worthless for me.
What I'm curios about is what format the capture takes -- previously, with 6.0 and a DV camcorder, I would capture in "raw" format and the system saved them to disk as .AVI files. With the Canon and a "competitive product", capturing HD creates a multitude of files -- separate audio files, a video file in some obscure format, a "scene" file or index indicating where the cut-points are or should be in the overall video, etc.
Honestly, I prefer the single file format for media, especially if I preview the entire tape and make a batch-capture list -- makes it easy to deal with "archiving" the captured media later on...

Thanks for the replies -- as it is, I do get a message with the other program >cough<pinnacle>cough< that my system might not adequately "capture" video. I suppose the system is getting to the "obsolete" stage, even though I followed the "ultimate linux box" article for the specs [AMD 3400, nvidia 6800, corsair memory, SATA disks set up as raid, etc.] but now that I think of it, it was probably the "ultimate linux box" for 2004 or so... ;)<br /><br />editing has been a little mushy with the other program, but so far all I've done is simple cuts and fades [oh, and one night hand-correcting the image stabilzation, but that's a story of it's own...] I'm kinda turned off by their "buy the package for $130 now, then pay more to turn on each individual feature you thought you were paid for in the first place..." I don't know if it will get to the point where it meets or exceeds the full CS3 price, but since I qualify for the discounted price of $300, I'll probably get there...<br /><br />But, back to the point -- if "all HD" is the same [separate audio and video files], then I'll deal with it and not worry too much. For the most part I don't care if the video "scrubs" properly, but I *do* care that it RENDERS properly (I can let the system render day and night if I have to) so I'll continue to squeeze a little more out of this "ultimate" system just a little longer [and in two or three years when my regular DVD player dies and "all that's available" is blu-ray, I'll upgrade when the prices are better :) ]

Is the Bower SFD926C Dedicated Digital. Guide Number 125 fully Compatible with the Canon 600D

I want a Camera Mounted and Wireless Speedlite compatible with my Canon 600d
Is the Bower SFD926C Dedicated Digital Flash for Canon SLR Cameras, Guide Number 125 fully Compatible with the Canon 600D ?
http://www.adorama.com/BOWSFD926C.html
I am going to buy this for 89 dollars.
are ther better Options with similar Price ?
thanks for the replies

Personaly I would not buy one but for $89 bucks, why not?
EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
Photoshop CS6, ACR 9, Lightroom 6

Connectivity with the Canon XHA1S

I shot in HD30F with the Canon XHA1S, using sony HDV cassettes. When I tried to capture using HDV settings in FCP (6.06), the camera couldn't connect and would only capture in SD settings.
Thoughts?

Verify that your camera settings are correct – HDV output selected Down Convert turned OFF.
Verify that your FCP Easy Set-up is HDV 1080i Firewire Basic.
Russ

HT1911 I am not answering the security question with the answer APL wants. What do I do?

I am not answering the security question with the answers APL wants. What do I need to do to get past the security questions to reset my password?

Welcome to Apple Support Communities
Hold Power and Home buttons for 10 seconds until your iPad restarts, and you will be able to use it again. After doing this, open Settings > iCloud > Storage & Backup, and make a manual backup

Question about the display lid not matching up with body

I was wondering if it is common for the lid to not match up with the body perfectly. I noticed that on my Mac the lid doesn't match up perfectly and is off a little, maybe a MM, but it is irritating nonetheless. It is slightly over on the left side, equal amount off on the right side and forward on the rear of the right side. To me it looks like the screen was mounted off a bit. It seems that most of the displays that I have seen match up perfectly and my computer has never been dropped or mishandled in any way so why the issue?
So, since I live 100 miles from the nearest Apple Store, I thought I would post my question here. I would also like to know if the lid can be adjusted to correct the misalignment.

I took my Mac to the Apple Store and had it looked at. They said I could leave my computer there for a couple of days and they could try and adjust my lid to match more closely with the body. I declined to do that.
There were a couple of display Mac's that weren't lining up quite right. I would say to anyone buying a new Mac from an Apple store to look at the alignment before they take their computer home!
BTW, this is one downside to owning a Mac in my opinion, and that is the fact that you have to be away from your computer for days at a time if something goes wrong. I have always owned Dell laptops and while they do have problems, they can be fixed at your home/business w/i one or two business days. Oh well.

Scanning question with the Canon LiDE 110

Similar Messages

Maybe you are looking for