Scanning software for OJ8610 is less than stellar.

The problem is I have extremely limited control over the scan using the 8610 software. I have had a chat - installed, uninstalled, reinstalled, (both 64 and 32 bit versions) - nothing is resolving the issue. The chat has been "escalated" and I will be contacted in 24-48 hours - I'm not that patient.
Bottom line: is the cheesy scanning software really the only thing available these days? If so, Where can I find software comparable to what was available with OJ6310?

Hi ImNotLisaTX,
Welcome to the HP Forums!
I see that you are looking for scanning software with your HP Officejet 8610, and I am happy to help you!
Please see this drivers website, HP Officejet Pro 8610 e-All-in-One Printer Drivers, as this is the only scanning software available for your printer. Please make sure you are downloading the Full Feature Software and Drivers, for your Operating System. If you do not know what Operating System you are using please visit this website. Whatsmyos
Hope this answers your question, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Similar Messages

HP LaserJet Pro MFP m125nw Scan Software for Windows XP

Hello,
May I kindly ask if there is a download location for the HP Scan Software for the HP LaserJet Pro MFP m125nw as the unit didn't come with a CD.
On the product page there is a driver listed for Windows XP, but the actual Software is not available for download.
Product Page:
http://support.hp.com/es-es/product/HP-LaserJet-Pro-MFP-M125-series/5396664/model/5303404/solutions
Product manual:
http://h10032.www1.hp.com/ctg/Manual/c03628466
Many thanks.
Best regards,
Ryan
This question was solved.
View Solution.

Hi Ryan,
Downlaod and install the full feature software below, that include the HP Scan software as part of the package:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Im-124819-4&cc=us&dlc=en&lc=en...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Scan software for OfficeJet 4215 in Leopard 10.5

I read here that scan software for the HP OfficeJet 4215 under OS 10.5 was being tested and almost ready for release. That was in October, 2009. I can't find it anywhere. The HP download site says that the scanner function of the 4215 is not supported under 10.5. Does anyone have suggeestions on how I can get the scanner to work? Everything I try says, "No Image Capture Device found."

Have a look at VueScan:
http://www.hamrick.com/
By far the best drivers and scanning software around, but not free.

Create TO for a quantity less than the delivery quantity

If we have created an inbound delivery in MB1C, 561 movement to post an initial entry of stocks, and then packed the HU in Vl32N. Now, we want to create a TO for a quantity less than the delivery quantity.
In LT03 I cant see any option to change the TO quantity. How can we actually change the TO quantity to be less than the Delivery quantity.
Thanks
-Mike

Mike,
I dont think that's going to be possible. The TO gets data from the del qty which is in your embedded HU since you have packed the qty in the del in the HU,
so if you are trying to create a TO with less qty means that you want a qty less that the HU in the del and this is not possible.
Alternatively :
1) You can receive it in your warehouse.
2) Move it in a re-packaging area
3) break the HU and re-create a new HU.
4) Pack the desired qty
5) Move the 2 HU's back to their desired bins.
Hope this helps and works!
thanks'

What happened to scanning software for the HP 3050A?

After scaning succesfully for 2 years from my HP 3050A to my Macbook Pro I got a "Scanning software for this printer is currently unavailable" message on my laptop today when I tryed to scan from my laptop. And when I press the "Scan" button on the printer it say "Computer not found" (even though it can find my computer quite nicely for print jobs). What happened? How can I get my scanning software back?
This question was solved.
View Solution.

Hi Yakatack and welcome to the HP forums!
I'm sorry to hear about your scanning woes with the Deskjet 3050a but I'd be happy to help once I've gathered a bit more information
1. Which version of Mac is on your computer?
1. a) Did you recently upgrade to said operating system?
2. Is the printer connected via USB or wireless?
3. Have there been any software changes/updates that you're aware of recently?
4. Are you able to scan through System Preferences, Image Capture or Preview at all?
If you have not recently upgraded your operating system or changed anything else on the computer, and the printer is wireless to the Mac, please power cycle your network. This entails turning off the printer and the Mac, pull the power cord on the router for 30 seconds and then when it's back up, turn everything else back on and try to scan once it all settles.
Hope to hear back from you soon
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

My ipod touch 4g is missing alot of important apps like settings, music, itunes store, app store and many more and i was wondering if there is any way at all to fix this for free or less than 70 dollars

My ipod touch 4g is missing alot of important apps like settings, music, itunes store, app store and many more and i was wondering if there is any way at all to fix this for free or less than 70 dollars

First try using Spotlight Search to find Settings. If that works go to Settings > General > Reset > Reset Home Screen Settings. If you can't get to Settings:
Try a reset:
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
Press and hold the Sleep/Wake button until the Apple logo appears.
If that doesn't work do a restore from backup or to factory settings:
http://support.apple.com/kb/ht1414

HP LaserJet 3380 Scanning Software for Win 7

Hi,
I own two HP LaserJet 3380 Devices, one is connected to a machine that runs Win XP, the other to a Win 7 computer. On the Win XP, I am using a scanning software, that is super fast and works excellently. I have a shortcut on my desktop on which I can click and then, the device starts scanning to desktop immediately with presaved settings. On the Win 7 however, I am forced to use the default Win 7 user interface which is slow, requires multiple clicks and saves files to a separate folder called something like Imported pictures that is automatically created on the desktop. Is there some way I can create such shortcut as I know it from Win XP (one doubleclick - scanning with saved settings and saved location begins) or is there any original HP SW which can co such things? From the provided product info on your website I understand, I must use what Win 7 offers. And that, to be perfectly honest, sucks. Thank You for Your help.
Andrej Bódi
Slovakia

Hi, take a look at VueScan.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Scanning Software for HP Color LaserJet CM1312nfi MFP

Has anybody noticed the difference between download drivers with scanning software and the orginal CD PC Setup scanning software. It seems to me that the downloads of drivers and softwares are only the light version of scanning software whereas; 1. there is no toolbar wh about help to see which version of scanning software is installed. 2. The orginal setup has a full version of scanning software.My xp box died xmas and since 2010 I setup the prnt drvs/scan software and I never though this would be a problem if I had to setup again using the downloads from HP. Thank you in advance!

Hi,
The original CD is not intended for Windows 7, however you may download the software for Windows 7 below:
http://h20566.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=3562007&swItemId=tw_77243_2&swEnvOid=4063
Be sure to unplug the USB if it is directly connected and uninstall any installed HP Software of the printer from Programs and Features prior installing the software above.
Hope that helps.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP OfficeJet Pro 7600 will not complete Scan Feed/ Cannot Install Scan Software for Prompt

HP OfficeJet Pro 2 issues
1) Select Scan thru feeder, paper starts, the stops, does not complete scan. Can I reset?
2) Used to have desktop Scan Icon, updated to Windows 7 - 64 bit, no longer have the Scan Icon for desktop
I love this printer. Certainly would like to continue Scanning when needed.
Sincerely,
[edited email address by moderator]

Hello AnnaY,
Welcome to the HP Forums.
I see that you are having a few issues when it comes to scanning and paper feed issue from the ADF.
I do have some troubleshooting steps that we can try in the attempt to resolve this issue.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I also suggest that we do a complete uninstall and then a reinstall just in case an update was done that changed either the software for the printer or a Windows settings.
Please remove the usb cable from the printer and the computer and leave it disconnected until further notice.
The next step is to click on the following link and follow the instructions for Uninstalling the Printer Software.
Once the uninstall is complete, please restart the computer. When the computer is back up and running, please make sure that any firewalls or anti virus protection is temporarily disabled.
The next step would be to install the HP Officejet Pro Full Feature Software and Driver. Save the download to your Desktop to that it creates it's own icon. This will make it easy to find. Follow the instructions and please do not connect the usb cable until prompted to do so.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Delivery Qty for Material is less than P.O. while doing STO from Plant

Dear All,
Please help me in this issue.
While doing STO from one Plant to another Plant, The picked Delivery qty in VL10D is less than P.O. qty for one perticular
Material. What could be the issue and solution from it.
Regards
AJIT K SINGH
Edited by: AJIT K SINGH on Jun 8, 2010 2:01 PM
Edited by: AJIT K SINGH on Jun 8, 2010 2:03 PM

>
AJIT K SINGH wrote:
> Dear All,
>
> Please help me in this issue.
> While doing STO from one Plant to another Plant, The picked Delivery qty in VL10D is less than P.O. qty for one perticular
> Material. What could be the issue.
>
> Regards
> AJIT K SINGH
Seems like the stock is not available for the particular material, thats why it is picking up the less amount which is available in stock, or the ATP check has blocked the stock available, and you have certain pieces available currently for the said material.

Query for file version less than 10.0 does not return expected data

I'm trying to build a query for all PCs that have a version of Iexplore.exe in c:\windows\program files\ that is less than 10.0 . When I run the query it returns no data. When I change 10.0 in the query to 9.9 it returns files with version 10.xxx in
the results. Its as if it is seeing 10.0 as 1.0. Is this expected ?
select SMS_R_System.Name, SMS_R_System.ADSiteName, SMS_G_System_SoftwareFile.FileName, SMS_G_System_SoftwareFile.FileVersion from SMS_R_System inner join SMS_G_System_SoftwareFile on SMS_G_System_SoftwareFile.ResourceID = SMS_R_System.ResourceId where
SMS_G_System_SoftwareFile.FileName = "iexplore.exe" and SMS_G_System_SoftwareFile.FilePath = "C:\\program files\\internet explorer\\" and SMS_G_System_SoftwareFile.FileVersion < "9.9"

It is because the values are not integer, they are a string. And therefore 1 is smaller then 9.
http://www.enhansoft.com/

Albumart for albums with less than 5 songs?

So i REALLY would like to see the albumart on albums (for instance EP's, singles) with less than 5 songs. Is there any Terminal line to do this?

When iTunes does not pick up artwork or the wromg artwork I usually just google image the albume and copy artwork, 500 x 550 is perferred if you want to use jukebox or large image, don't bother with anything under 300 x 300 as it will be blury. Go back into iTunes highlite all the songs on the album, right click and paste into the album art square.

HP Scan Software for Mac

Hi.
I am currently running OX 10.9 and need to do some scanning. From what I have read here is that I need to be using an HP Scan Software. I cannot find a link to download one. Can you please provided some assistance? I am not able to scan using the option in system preferences as it has no save button and I have multiple images for one scan. Please help. Thanks!

Hi there, which printer do you have?
This link might also help in the meantime: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03967522
*** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***

I cannot find my scanning software for my hp office jet 6200 series. what do i do?

i have an hp psc 2350, hp office jet 6200 series all-in-one. when i press scan on the all-in-one it shows the error message 'you need to install or run device software for feature. press ok to continue'. i do not have this software cd. is it a driver that is missing? if so, where do i get the driver?
Thank you.

redmama57 wrote:
if so, where do i get the driver?
Hi,
Driver and application software should be in this link
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Scanning software for deskjet 3520e

I have a Deskjet 3520e All-In-One-Printer but there was no scanning software included with the CD. My HP Photosmart 110 had the HP Solutions software that I always used. Is there any way to use that same software on my Deskjet (and if so, how do I set it up) or is there other software compatible with the Deskjet I can use?

Hello @tarheel1st , and welcome to the HP Forums, I hope you enjoy your experience!
I understand you are experiencing scanning issues. I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit. With this information we can provide you with accurate information.
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Good luck and please let me know the results of your findings. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Scanning software for OJ8610 is less than stellar.

Similar Messages

Maybe you are looking for