Scanning the network for devices with Network Monitor

At the moment there are no way to scan your network for devices. And I think there is a good reason for not doing so. If your users shut down their PC when their day is done - do you need an alert for that? 
They way this is designed is for you to decide which devices is the most important, so much that it demands live monitoring.

Are they going to add the ability to scan the network for devices instead of having to manually add them? I've seen it in the inventory management but can't find a way to do it in the Network Monitor. I apologise if you can already do this but I haven't figured it out myself.
This topic first appeared in the Spiceworks Community

Similar Messages

  • I currently have a D-Link DI-604 broadband router with windows computers.  How can I add wifi to the network for use with ipad?  Can I use AirPort Express?

    I currently have a D-Link DI-604 broadband router with windows computers.  How can I add wifi to the network for use with ipad?  Can I use AirPort Express?

    Yes. You can directly connect an 802.11n AirPort Express Base Station (AXn) using an Ethernet cable. The AXn would then just need to be configured as a bridge to allow the D-Link to continue to provide both NAT & DHCP services for all network clients connected to either router.
    In this configuration, the AXn would broadcast a wireless network for your wireless network clients to connect to.

  • HT1178 I bought Time Capsule specifically to back up my computer at work. Only my computer. I completed the steps the best of my knowledge but I got the message, "This device & its network services will be temporarily unavailable. Are you sure you want to

    I bought Time Capsule specifically to back up my computer at work. Only my computer. There are many computers within my department. I completed the steps the best of my knowledge but was unsure of which option to click. I clicked "I want to create a new wireless network". At the onset the instructions said I needed to connect with an ethernet cable, which I did. But I have no desire to connect to the internet, print from it, or have others access. I did deselect guest options, and I did put in passwords. But at the end of the process I got the message, "This device & its network services will be temporarily unavailable. Are you sure you want to continue."
    I was worried this would shut me down and I wouldn't be able to continue to work. I don't necessarily need to connect wirelessly. It is connected via ethernet cable from machine to device.
    Can you advise me how to continue? Did I choose the wrong options?

    I bought an external hard drive called "Seagate Backup Plus" From the Apple store to back up everything on my computer and anything new on my computer. It came with Time Machine. The external hard drive disk had 1 or 2 Terabytes. Time Machine says "next backup: When disk is connected." "Oldest backup: July 2, 2014." & Also "Latest back July, 2."

  • Aperture shared over a network for viewing with Front Row?

    Aperture shared over a network for viewing with Front Row? I can view iPhoto from my laptop or desk top but I cannot find a way to share Aperture over the network.

    If tested to work with other MacOs versions, this should be a main FAQ listed on Apple's Support website for Aperture and/Mac OSX.

  • ITunes 10.6.3 Mac running 10.7.3 not responding I have deleted iTunes and reinstall iTunes and it keeps happening I also scanned the computer for any trojans and any other possible viruses but the pc is running perfect waft do I do ? Please help me ?

    I need help iTunes 10.6.3 Mac running 10.7.3 not responding I have deleted iTunes and reinstall iTunes and it keeps happening I also scanned the computer for any trojans and any other possible viruses but the pc is running perfect waft do I do ? Please help me ?

    Hey thanks for replying.
    Here's what I did:
    First I tried the Winsock reset in the Command prompt. Nothing changed.
    Next, I tried the instructions on http://http://support.apple.com/kb/TS4123. The only other program that came up on the 'Winsock Providers' tab on the program was 2 Windows Live applications, which I can do without. So I deleted all Windows Live Applications.
    I did the Winsock reset in the Command Prompt again and rebooted my comp.
    Unfortunately, nothing has changed. iTunes keeps freezing at various stages of the sync, then shows the candy cane-striped bar with either the words 'Finishing sync' or 'Cancelling sync', before showing the Apple logo.
    Sometimes, iTunes gets to the syncing stage - "Copying # of ####" - where it will trudge through the first, second and third tracks before flashing "Copying 4 of ####" for a split second and I catch "Cancelling sync" briefly before the Apple logo appears.
    Again, I've repeated the steps I mentioned in my previous post. Does ANYONE know when the new version of iTunes is set to be released?! This one is driving me INSANE, to say the least!!

  • RFC metadata import error - Couldnu0092t find the branch for version with id

    Hi All,
    When re-importing RFC meta-data, system returned following error message   <i>Couldn’t find the branch for version with id = <version id></i>
    I am not able to delete the existing (already imported) RFC meta-data.  However, I am able to import the same RFC into a different Software Component.
    The error is described in SAP note – 710998, unfortunately, this note only references  XI 2.0
    Is there anyway other than these-
    1) Deleting a new SWCV and importing it and then import the RFC and make Release transfer from new SWCV to Old  SWCV. If so, is there any impact on my QA systems and Productions systems during transport.
    2) Deleting the existing SWC and Reimporting from SLD and trying to import the RFC again and redoing all the design
    3) Exporting the current SWC and deleting it and importing the same file and then trying out the RFC import.
    These options I just thought as an workaround solutions. Because i am not able to try these, as i don't have any test systems for this. Let me know any suggestions on these.
    Thanks in advance,
    Regards,
    Moorthy

    Yes, the used structures were imported from an old XI system. But I created the mapping new on the PI and put the used externel definitions manually to the mapping. That worked fine but now everytime when saving the mapping this error occurs. Btw both structures are used in other mappings, too, and they can be modified without any problems.
    Which jdk version do you mean? Client or server?
    Regards.
    Oliver.

  • I connected my iPod to my PC and got a message 'The software for communicating with the iPod is not installed correctly.

    I connected my iPod to my PC and received a message box that read "The software for communicating with the iPod is not installed correctly.  Please reinstall the iPod's software."  Not sure what I need to do.  I did uninstall all of my iTunes and related software components and then reinstalled the latest version of iTunes but that did not correct the problem and I now can't access my iTunes library at all.

    Another thing is that iPod Touch shows up fine...I've tried every other ipod from older 4gig Nanos to 120gb Classics and none of them work..this is really annoying!

  • The software for communicating with ipod is not installed correctly..

    Everything used to work fine on my laptop. I'm fairly sure it was after I had uninstalled Zune crap from my laptop when my iTunes started messing up and saying "the software for communicating with ipod is not installed correctly".
    I've searched the whole internet front to back about this error and most things I find are from 2005'ish. I've tried changing the registry permissions, reinstalling itunes, clearing out everything that has to do with itunes, doing all the msconfig things, manually starting the ipodservice.exe.
    I still cannot figure it out and I've had this error for like 3 months. Only thing that I notice that MIGHT be odd is that I'll have ipodservice.exe running (from System) and when I open iTunes another ipodservice.exe will open (from my username) and then close after a few seconds and then I plug my ipod up and bam, the error from above comes up. Anyone have any clue? Like I said everything worked fine at one point!
    Thanks!

    Another thing is that iPod Touch shows up fine...I've tried every other ipod from older 4gig Nanos to 120gb Classics and none of them work..this is really annoying!

  • VS Exp 2013: Unable to create the Web site ... The components for communicating with FTP servers are not installed.

    I have MS Visual Studio Express 2013 It has worked fine for many months and then suddenly (I have made no configuration changes or added new programs) when I try to publish I am getting the message:
    Unable to create the Web site 'ftp://ftp.xx.xx/xxx.org.uk/www/htdocs'. The components for communicating with FTP servers are not installed.
    (I have replaced actual name with x's).
    I had a similar problem some months ago and found that saving all files, closing VS 2013 and re-starting the program fixed the problem. This time it has not.
    I am at a loss to know how to take this forwards. I do not use IIS.
    Any help would be appreciated.
    Michael.

    Hi Michael,
    For web site development, so you use the VS2013 express for web, am I right? We have to make sure that it is not the VS version issue.
    As you said that it worked well before, did you install other add-ins or tools in your VS IDE like
    Xamarin or others?
    Maybe you could disable or remove all add-ins in your VS IDE, test it again.
    please also install the VS2013 update 4 in your side.
    Best Regards,
    Jack
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • In ITunes I don't have a listing in the column for "Devices" so I can check to see if I have sync all ringtones.  I have one downloaded but can't get it synced to my Iphone.

    In Itunes I don't have a listing in the column for "Devices" so I can check to see if my Iphone can sync all my new ringtones.  I have one ready to go but cannot get it downloaded to my Iphone.  Where is my "Devices" heading in the column on the left side of my Itunes page?

    Connect your device to computer.  In iTunes left Pane, select your iPhone under 'Devices'.  Then on th right Pane, select Tones tab.

  • How to creat the Varient for 1099MISC With Holding Tax

    How to create the Variant for 1099MISC With Holding Tax ?

    HI,
    please follow the below steps to create variant at report.
    tcode se38
    report RFIDYYWT
    pass all the parameters
    press save icon
    give variant name
    retrive the variant in report
    tcode se38
    report name RFIDYYWT
    press : shift + F5
    or get varinat icon.
    I hope above will resolve your issue.
    Regards
    Madhu M

  • LMS 4.2.2 how to automatically resolve the hostname for device identity?

    Hi,
    iam running lms 4.2.2 and i do not know where to set up lms to resolve the hostname for device identity.
    In "Inventory/Manage Devices /Device identity", having the "Device Name", "Hostname" and "IP Address" set to the discovered IP (f.e. 10.100.100.20).
    I want that the "DCR Device Name"  and "IP Address" is the discovered ip (10.100.100.20), but not the hostname (should look like AS100_Swtich_00-1, as it is set on the switch).
    Editing the hostname manually for over 1000 discovered devices will be inefficient...
    regards,
    CCNP R&S       

    Hi,
    I have a same problem.  i send the screenshot which shows where you can set what will be the preferred device name. ( earlier the sysname checkbox was ON )
    Unfortunetly after discover and inventory upgrade jobs the device names are not restored to IP, they keep the hostname as preferred device name.
    Now i do not know how can i change these settings automatically.

  • How do you set up the alert for FaceTime with sound

    How do you set up the alert for FaceTime with sound?

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    http://tinyurl.com/32drz3d
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
     Cheers, Tom

  • The components for communicating with FTP servers are not installed.

    I'm running VS 2013 and when I try to publish to ftp site I get the following message. "Unable to create the Web site 'ftp://xx/'. The components for communicating with the FTP servers are not installed."   It has been running fine. I
    can publish to file system, web sites etc, just not through the ftp settings. I can access the ftp sites from my system, using other programs. It is not trying to connect to the ftp site at all.

    Hi paaccess,
    Glad to receive your reply.
    According to your description, since we can publish an application to ftp site in Visual Studio Prof 2013 in our side. Therefore, to further make sure if the issue is related to the VS IDE issue. We suggest
    you try to publish to ftp site on another machine you installed same version of VS Prof 2013 and then check it again.
    If you can publish on another machine, I suggest may need to re-download the
    VS Prof 2013 from Microsoft website and then install it again on your local machine.
    If you still could not publish on another machine, I think that the issue is not related to the VS2013 IDE issue. If possible, I still suggest you post the issue directly to the IIS.NET Forum:
    http://forums.iis.net/,
    it will better help you solve the issue.
    Thanks for your understanding.
    Have a nice day!
    Best Regards.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click HERE to participate the survey.

  • My new IPOD "the software for communicating with ipod is not installed pro"

    The message "the software for communicating with ipod is not installed properly keeps on showing up no matter what I do.
    I have removed the program several times and reinstalled it several times. I have updated my windows. I have tried just about evertying. I have wasted several hours on this ipod, I am about to return it and be over with it..
    I have even went to the homesite to download the updates and the newest version of ipod manager.
    My ipod charges from the USB port but I think it is recognising it as a seperate drive.
    I dont know what else to do.

    Welcome to Apple Discussions.
    Are you using Fast User Switching in Windows XP? If so, logout the other users first.
    Check this: iPod shows up in Windows Explorer but not in iTunes, iPod Service Error or Please reinstall iTunes

Maybe you are looking for