Scanning with Canon MP500 over airport extreme to imac

I'm trying to scan wirelessly, but it doesn't seem to work, I can print just fine. I downloaded all the software and the new drivers from canon's website, but still nothing. I read that airport can't handle a signal the opposite way so it can't scan if anyone knows if it can or can't be done let me know.

Sorry, but the USB port on the AirPort Extreme Base Station (AEBS) does not support the advanced functions (scanning, copying, faxing, etc.) of multifunction printers.

Similar Messages

Wireless comm problem with time capsule or airport extreme using iMac G5

I did buy a Time Capsule and an iMac 20" G5 January 2009...Installed all the components and created a wireless network...MacBook, iPhone and iPod Touch connected perfectly...iMac connected but started to drop communications with Time Capsule...Safari, iTunes and other internet-access programs had problems to connect 100% with the web...After reviewing all the post here and "testing/trying" several parameters, I found out that you need to define a WPA/WPA2 password protection with more than 13 characters...FYI, Time capsule is configured using 802.11n (b/g compatible)...

Further to Bob's comments..
A Gen1 TC will be using marvel wireless chip and your 2008 and 2010 Macbook will use atheros and/or broadcom cards.. Just open your system profiler and look for info on the airport. We find the mixture of wireless chipsets especially older draft N and later N products can give very varied results.
The very fact you are linking at 270 and not 300mbps shows some reduction from theoretical max speed.. and really to get over 100mbps with any wireless you need perfect setup.. matched wireless chips etc.
Do a test uploading and downloading a file to the TC to see if the LAN speed is better than internet speed.
In reality I think you are doing especially well.. we see loads of people complaining about slow internet here who are getting less than 10% of the speed they get direct when routed through the TC. And on most occasions the limit in speed is not really going to affect what you do, as the real links to the internet are not that fast.

I have a iMac with a built in airport extreme card. Does the imac act as a wireless router so that I can connect to the internet from my iPad by tethering through my iMac?

I have a iMac with a built in airport extreme card. Does the imac act as a wireless router so that I can connect to the internet from my iPad by tethering through my iMac?

Depends which iMac exactly and your network setup, you can go into System Preferences and under the Sharing pane you can enable internet sharing from ethernet (or whereever you get your internet from) to Wi-Fi.

How can i sync ipad1/iphone4 with itunes wirelessly using airport extreme network

how can i sync ipad1/iphone4 with itunes wirelessly using airport extreme network

Hi,
This is currently not supported by iOS for any devices. Rumour is that iOS 5 will finally add this function, until then I'm afraid you are stuck with the good old cable.
Jamie

Will an old Airport Express work with a 4th generation AirPort Extreme?

My Airport Express model A1084 will not seem to work with my 4th generation AirPort Extreme.
I've tried everything I could think of to get it to work.
I am able to set it up(Extend existing network) with a copy of Snow Leopard but although it has a green light and seems to be working, I can't pick up a signal on any of my devices. Everything on iStumbler looks ok to me except the channel on the Airport express is 3 and the Extreme is 149. The Express is on the 2.4 ghz and the Extreme is 5ghz. What should I look for on iStumbler that might give me a clue?
Thanks,
Mot

The A1084 does not have a setting to "extend a wireless network", so it cannot be used for that purpose with the newer AirPort Extreme.
The A1084 Express can "join" the wireless network provided by the AirPort Extreme, and be used for AirPlay and to run a remote USB printer, but the Express does not provide any additional wireless signal coverage when it joins a wireless network.
You need the new A1392 version of the Express or the previous version, the A1264 if you want the Express to "extend" a wireless network wirelessly.
The older A1084 Express could be used to provide more wireless coverage if you can permanently connect the Express to the Extreme with a wired Ethernet cable connection.

Scan with Canon MP 470

After a software update Safari 10.6.8 I cannot scan with Canon MP 470

There's is no such thing as networked scanning in the computer world (unforunately). You must connect your Canon multifunction printer to your Mac and do it from there.
deltatux

Is the Time Capsule wi-fi router compatible with the Nest thermostat? I've read where there are issues with the Nest and Airport Extreme (AE)? Is AE used in the Time Capsule?

I've read where there are issues with the Nest and Airport Extreme (AE)? Is AE used in the Time Capsule?
If so, i already have a wi-fi router, so can the Time Capsule simply be used for wireless backup instead of as a router if there is conflict?

A TC is fundamentally a AE with a sata chip included to drive the hard disk. Some slightly different bios to include disk functions, although most of those are also on the AE. So as a router it is 99.999% identical.
And yes, if you have another router you can easily bridge the TC and use wireless for backups and internet connection. Once you no longer route through the TC the issues with most NAT problems including port forwarding should disappear.. mostly this is due to all apple routers using NAT-PMP instead of upnp which is the near universal standard for opening ports.. without upnp apple keep their routers more exclusive.

I can connect to internet with my MBP through Airport Extreme, but my iOS devices can't. Please help.

I can connect to internet with my MBP through Airport Extreme, but my iOS devices can't. Please help.

GerleMan, Welcome to the discussion area!
There are two probably causes:
Your ISP is blocking the port used by Entourage to send mail and the ISP used by the other wireless networks is not.
OR
Your ISP doesn't like OS X's default MTU seting of 1500. If this were the case it should also affect any large file transfers you try to make from your Mac to the Internet.

Constant Disconnection from Airport Extreme Networked iMac (late 2009)

I keep trying to copy fairly large files (2-7GB) over my Aiport Extreme (latest—5th generation) network from a early 2011 Macbook Pro to a 27" iMac (late 2009), and I keep getting disconnected from the iMac while the file is copying. I've tried repairing permissions on every computer in the house and restarting them, but I'm still having issues. I have no issues copying files to another late 2011 Macbook Pro in the house, so it seems to be happening only when I copy them to the iMac. The iMac is running Snow Leopard and the Macbook Pros are running Lion, so could that have something to do with it?
Additionally, I had been trying a wireless extended network with another previous generation Airport Extreme, but I found the connection wasn't much stronger with the extension, so I've just been leaving the second Airport Extreme unplugged. I've had that unplugged for months and haven't had any issues, so I don't think that's the problem.
I'm hoping this isn't a sign of something being wrong with the Aiport card in the iMac. Anyone have any ideas?

Bump?

Airtune Over Ethernet with Time Capsule or Airport Extreme

Can the previous generation Time Capsule or Airport Extreme bridge an ethernet client to an Airtunes network?
Current Setup: I have an aluminum iMac wired to my Time Capsule; currently, I use the aluminum as a music server by connecting to several Airport Express clients over the the iMac's built-in Airport for Airtunes support.
Problem: I have 3-802.11g clients dragging my wifi network. I would like to dedicate the iMac's internal network to the g-clients so I don't have to use compatibility mode for my n-network. However, I will lose Airtunes speaker support when I use internet sharing over the built-in Airport. Airtunes does not appear to support the Time Capsule ethernet client.
Nodes:
-AE 802.11g (Airtunes only)
-AE 802.11n (Airtunes and USB printer)
-1st gen Time Capsule (Internet gateway, "creating network" 802.11 g/n,
-iMac 8,1 (Music server via internal wifi, wired TC client)
-Macbook 4,1 (wifi client)
-iPhone
-Canon MP620 (USB to iMac, wifi to Macbook)

Further to Bob's comments..
A Gen1 TC will be using marvel wireless chip and your 2008 and 2010 Macbook will use atheros and/or broadcom cards.. Just open your system profiler and look for info on the airport. We find the mixture of wireless chipsets especially older draft N and later N products can give very varied results.
The very fact you are linking at 270 and not 300mbps shows some reduction from theoretical max speed.. and really to get over 100mbps with any wireless you need perfect setup.. matched wireless chips etc.
Do a test uploading and downloading a file to the TC to see if the LAN speed is better than internet speed.
In reality I think you are doing especially well.. we see loads of people complaining about slow internet here who are getting less than 10% of the speed they get direct when routed through the TC. And on most occasions the limit in speed is not really going to affect what you do, as the real links to the internet are not that fast.

Cannot print or scan with USB printer over wifi from airport express / time capsule wifi

Hi everybody,
I have recently set up time capsule connected to the router from the telephone company but created a new wifi network for the time machine to better work. Now I have bought an airport express to be able to use my USB printer over the WIFI network. I have to laptops, the printing works fine over the mac book air but not over the macbook pro. On top of that I cannot scan with either of the devices.
I have scanned most of the information out there but this issue seems not to be addressed properly anywhere. Advices given do always repeat itself but no solution worked for me.
Now I have plugged the usb from the printer directly back into mac book pro and the problem seems to persist here too. The message I receive everywhere is this one:
The software for the printer was installed incorrectly.
Would you like it to be repaired?
When I hit the Repair button a notice says 'repairing permissions' but nothing really happens. In the end nothing has been printed.
Resetting the printing systems has not really changed anything either. The problems persist.
This is the screen I get when the printer is directly plugged in through USB:
Result: printer recognised and installed, I cannot print (The software for the printer was installed incorrectly), but I can scan (probably because of the hint ('multifunction')
When I try to install the printer through the network connection (wifi network over time capsule and airport express) I get this image:
Result: printer recognised over bonjour but without multifunction (in other words without scanning), I cannot scan nor print (The software for the printer was installed incorrectly)
As I already mentioned any solution I found online would not work. Now the qustions are:
1) why can't I print? The drivers seem to be there but somehow broken, and I don't know how to repair it
2) why can't I scan over wifi? It sould possible that any function that can be performed over cable should also be able to performable over air, right?
I would very much appreciate any kind of help.
Thank you in advance,
Cris

What's up doc?
HP has not provided "network" drivers to allow advanced features when the the All-in-One is connected to the USB port on the Time Capsule.
Therefore, only the printing function is supported when the All-in-One is connected to the Time Capsule's USB port.
If you need advanced features like fax, copy, scan, maintenance etc., you will need to connect over the WiFI network, or connect the All-in-One directly to your computer.

How do I get my new Mustek scanner to work over Airport Extreme?

We can't get our new scanner to even show up over our wireless network.
When I hook it straight to my iMac (2.8 GHz Intel Core Duo, OS X 10.6.8 [Snow Leopard]), I can use the enclosed software (ImageAcquire), but it does NOT show up either in ImageCapture nor can I add it via the Print & Fax preferences. When I hook it through our (previous generation) AirPort Extreme, it doesn't even show up in the ImageAcquire software that came with it, and I get the message that a cable is disconnected.
The scanner is a Mustek A3 ScanExpress 2400, and is supposed to work on Macs, since it has its own drivers. I have downloaded the most current drivers and software direct from the manufacturer. Apple doesn't have it listed in Software Update.
We have successfully run our HP scanner/printer over AirPort.
Any suggestions? Thanks.

When you say that you are hooking up the Mustek device, I assume that you mean via the USB port on the AirPort. Is that correct?
If you are connecting the Mustek device via the USB port on the AirPort Extreme, and the device does not appear when you click Print & Fax, that would likely indicate that Mustek has not provided network drivers for their device.
The USB port on the AirPort is far different than the USB port on a computer.
You might want to ask Mustek support if they have network drivers available for use on an Apple AirPort router.
Keep in mind that in almost all cases, only the print function is supported when you connect an all-in-one or combo device to the USB port on the AirPort Extreme.
Unless something has changed very recently, you will not be able to use the scan function when you connect your other HP device to the USB port on the AirPorts.
If you are connecting the HP using wireless only or via Ethernet, then you should have full functionality that way.

Trouble printing to Canon ip4200 over Airport Express from Windows XP

I've just spent the last 4 hours trying to get my Dell laptop running XP to print to my Canon ip4200 USB printer connected to my Airport Express. My PowerBook (10.3.4) connected without issue and has been working fine. The XP laptop just refused to print, and the "troubleshooter" was useless. It would print fine over a direct USB connection, but, despite following the directions for connecting an Airport Printer in XP to the letter, it failed to print every time.
I was tearing my hair out in frustration when I eventually discovered this post at macosxhints: "RAW port has changed!" (scroll down thew page a bit):
http://www.macosxhints.com/comment.php?mode=display&sid=2003072510530643&title=R AW%20port%20has%20changed%21&type=article&order=&pid=0
The default Raw configuration for "Standard TCP/IP Port" was set to 9100. I manaully changed it to 9101 and all works great now.
I don't know where the default of 9100 came from, but this has cost me an entire morning of frustration. GRRRRR!
Anyway, I'm posting this here in case anyone else is struggling with similar symptoms
867MHz G4 12 PowerBook; 640MB RAM 40GB HD Mac OS X (10.4.3)
867MHz G4 12 PowerBook; 640MB RAM 40GB HD Mac OS X (10.4.2)

Try Port 9101
Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express
http://www.ifelix.co.uk/tech/1004.html
Or try Bonjour
Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express using Bonjour
http://www.ifelix.co.uk/tech/1008.html
Problems with finding Printer Driver on Windows XP when using printer connected to Airport Extreme or Express
http://www.ifelix.co.uk/tech/1012.html
iFelix

Canon mx320 and Airport Extreme

Hello !
Currently I have an iMac and a MacBook. We also recently purchased a Canon mx320 and am eagerly awaiting the arrival of our Airport Extreme Base Station. Now my question is whether or not the Canon will be compatible with the Airport Extreme?
It is my understand that if you plug in a "compatible" printer into the Base Station that both of the computers will be able to print to it??
Please help!
Thanks in advance.

Hi there.
The Airport Extreme will allow you to print when the Canon is connected to the USB port of the Extreme. You will also be able to get ink levels and perform machine maintenance, such as head cleaning.
However, the Extreme will not allow you to scan from the MX320 to your Mac. This is a limitation of the USB port on the Airport devices. If you do need to scan at any stage, you will have to connect your Mac directly to the USB port of the MX320.
Pahu

Scan with canon MP520?

Bought a new MacBook 2.2GHz and a Canon multifunction printer for a rebate deal. I love both but am having trouble getting anything to scan properly. I have it hooked up to a new airport extreme 802.11n base station. It prints and copies perfectly, just won't scan. Has anybody been able to scan with this or any Canon multifunction?

There's is no such thing as networked scanning in the computer world (unforunately). You must connect your Canon multifunction printer to your Mac and do it from there.
deltatux

Scanning with Canon MP500 over airport extreme to imac

Similar Messages

Maybe you are looking for