Scanning with Deskjet F4280 get partial page
I have a Deskjet F4280 which worked fine until recently. Suddenly when I try to scan it only scans about a quarter of the page instead of the whole page and shows it to you like it did a good job. Please help!
Hello @pintastic , and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing scan issues. I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit. With this information we can provide you with accurate information.
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please let me know what you find. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.
Similar Messages
-
HP Deskjet F4280 prints blank pages on Macbook
Hello,
My printer came with a macbook I bought in 2008 and worked wonderfully for years. Out of nowhere it stopped printing or making copies. The printer acts like it is doing the action but the pages come out blank or with spotty black marks where text should have appeared. I have a newer macbook now that runs OS X 10.10 and the printer shows up under my USB and in the printer & scanners. I'd appreciate any ideas on what to try. Thanks.Hello there! Welcome to the forums @brookshd
I read your post about your Deskjet F4280 showing some print quality problems when making print outs or copies. The spotty black marks could be a sign of a printhead problem.
Please try these steps to see if the issue can be resolved: Faded, Missing, or Dull Colors in Printouts
If the troubleshooting does not help at all, I would lastly suggest technical support.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps! Have a great Tuesday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
My deskjet 9800 only prints partial pages
My deskjet 9800 only prints partial pages in 11x17" format. then pulls another paper for two inches of printing then pulls another paper for another two inches of printing etc. Other sizes work fine. I just upgraded my computer and changed cable to a usb port. I downloaded a new driver and reset all the settings. I am lost as what to do. thank you Einer Mortensen
Hello , Welcome to the HP Support Forums!
I understand that you're experiencing partial print issues when printing from your Windows 8 computer to your HP Deskjet 2540 All-in-One Printer. I would like to assist you today with resolving this wireless printing issue. Because you are able to scan without issues, and are able to print from other devices perfectly fine I do not believe that this is a networking issue, or a software and driver conflict between your Windows computer and your printer. Rather, I believe that there is a wireless printing port (WSD Port) conflict occuring on your computer. Can I please have you follow the steps below to resolve this issue. Microsoft has released a Hotfix to correct printing issues within the Windows 8 and Windows 8.1 Operating Systems. This includes 'Partial Printing' and 'Printer Offline' issues. The printing issues appear to affect networked printers regardless of make or model and is a conflict with the WSD Network Port on Windows 8.1. Please click here to download and run a Microsoft Fix It Tool. Once the website opens for the Hotfix please click the button for 'Hotfix Download Available'. Please follow the onscreen prompts to install the Hotfix. Once the Hotfix has been loaded please test wireless printing again. If printing fails you may need to restart your computer for the Hotfix to take affect. Once your computer comes ON test wireless printing to confirm that the issue has been resolved.
Please respond to this post with the result of your troubleshooting. I look forward to hearing from you. Good luck! -
Partial page printing with newer HP Laserjets and Xerox printers
Post Author: lazytrbar
CA Forum: .NET
I have been using Cyrstal Reports Developer 9.2 with .NET 2003 for a couple years now with no problems. We recently installed some new printers. HP Laserjet 4250 and Xerox Phaser 6300N. On both of these new printers the crystal report printout comes out as only a partial page. The area of the report printed is only about 4 inches x 4 inches in the upper left hand corner. The rest of the page is blank. It is not a margin setting on the printer. All other printouts work correctly from web, office products, etc.
If you force the 4250 to use the older 4100 printer driver the problem goes away but that is not a good long term solution. What do I need to do to get my Crystal Reports to work on these newer printers???
I appreciate any advice.Had similar issue with my HP Deskjet F4500C All in one printer, here's what I did:
make sure these packages are installed or install them
pacman -S cups cups-pdf hplip pyqt3 python2-pyqt
pacman -S system-config-printer-gnome
rc.d cups start
To add device and install hp driver:
1. Run ‘hp-setup’ as root.
2. Click ‘Show Advanced Options’ button and check-enable ‘Manual Discovery’.
3. Enter IP address 192.168.59.63 in the ‘…device ID…’ entry and click ‘Next’ to install driver.
run system-config-printer as root, to add printer
# system-config-printer
click “Add”， Select Device -> Network Printer -> input the IP address of the printer such as “192.168.1.3″, click “Find” -> “Process”
you should be ok from here, if not some further steps:
If you encounter the following error:
File “/usr/share/system-config-printer/newprinter.py”, line 1531, in getNetworkPrinterMakeModel
debugprint (host + “: ” + args)
TypeError: cannot concatenate ‘str’ and ‘list’ objects
You should comment out the error line at 1531 of newprinter.py, and then continue to add the printer.
4). Finally, you can run hp-check to see what problems exists for the printer. -
How do i edit a scanned document on a Deskjet F4280?
All my scans end up in HP Photo and i cannot edit documents there. Can anyone tell me how to save my document scans so i can edit them?
SandieThere is a page with great information about how to perform scans with and without the HP software for the F4280. This page can be found here.
As to saving scans so that you can edit them. What type of scan are you doing? (picture or text document) What type of edits are you attempting?
What is the operating system of the computer connected to the F4280?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee. -
Global error page - compatible with partial page rendering
My global error page doesn't show in some isolated cases. Could this be because of partial page rendering? What changes might be needed to have it work in all cases?
I have created a global error page and set it in the web.xml with:
<error-page>
<exception-type>java.lang.Exception</exception-type>
<location>pages/htmlErrorPage.html</location>
</error-page>
This displays the htmlErrorPage when errors occur in nearly all my tested cases. However, when the test error is created inside one page redraw I find that the application dies without ever displaying my error page. On the console I get an error message that starts with:
Jun 13, 2008 12:54:11 PM oracle.adfinternal.view.faces.renderkit.core.xhtml.PanelPartialRootRenderer encodeAll
SEVERE: Error during partial-page rendering
javax.faces.el.EvaluationException: javax.faces.FacesException: javax.faces.FacesException: Can't instantiate class: 'com.softrek.adf.view.managed.JFreeChartPlotter'.. class com.softrek.adf.view.managed.JFreeChartPlotter : java.lang.NullPointerException
at com.sun.faces.el.ValueBindingImpl.getValue(ValueBindingImpl.java:190)
at com.sun.faces.el.ValueBindingImpl.getValue(ValueBindingImpl.java:143)
But my error page doesn' t show up. I've used the identical test error in most other parts of my application and it shows - so other than the partial page rendering going on, I can't see why this case would be different.
Is there any known bug (or feature) about the use of an error page during partial page rendering?
Any ideas will be welcome.I'm unclear on how I would get the error to redirect.
I've changed my web.xml to go to a servlet of my creation, set up the mapping and all.
It works fine for exceptions generated in a backing bean normally.
When the exception occurs as part of partial page rendering the error servlet is not called and the user's session dies.
This is being done in JDeveloper 10.1.3.3
The new web.xml contains:
<error-page>
<exception-type>java.lang.Throwable</exception-type>
<location>/servlet/errorAction</location>
</error-page>
Which is working for errors generated under most circumstances but not when they are inside my partial page change.
How do I get errors to go to my error page when the error occurred during PPR?
PS. Using the PartialPageUtils.isPartialRequest() method generated a recursive error in my error servlet. This looks like the known limitation for Faces error handling. -
When I print I get multiple pages with a little print on all pages of what I want printed
when I print I get multiple pages with what I am printing with a few lines on each page till what I have printed is complete.
This question was solved.
View Solution.mamorse,
Thanks for the additional info. Lets try downloading and running the Print and Scan doctor located here. It can fix a lot on its own but if not it will give us a better idea of what is going on. The weak signal is not likely the culprit (as it has been working for a good while) but we can try altering that if other steps fail.
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too. -
Tiny rectangles showing as separate pages in multipage PDF scans with Image Capture?
I am having a scanning problem. I’d appreciate it if anyone could explain what’s happening and suggest how to avoid it or how to fix it after the fact. I’m using a large-format scanner, the HP Officejet 7610, with a MacBook Pro, running OS X Yosemite, v.10.10.1. I am using Apple’s Image Capture app, v.6.6, for scanning software. I am scanning some newspapers, with text and photos on the pages, which are about 11” x 14-3/4” in size. I am making multipage PDFs, each about 10 pp., at a resolution of 300 dpi. Sometimes, when I scan a single page or multiple pages, one or more tiny rectangles of scan show up in the resulting PDF, following a normal page or between pages. In the Acrobat Reader, this tiny rectangle shows up as a curious little box, much less than an inch on a side, and when the PDF is printed out, the tiny rectangle is printed, too, as though it were a separate page. Why is this rectangle showing up in my scans? Is there a way to keep from getting it? After it has been made a part of a multipage PDF, is there any way to get rid of it, keeping the rest of the scan?
This question was solved.
View Solution.Hey there @Rudyard , welcome back
I read through your post about the scanning issues you're having, and I'd like to help!
Please try scanning with the HP Scan software to see if the same quality problems happen, and if so, try these steps in order:
Mac OS X: How to reset the printing system
Repair disk permissions
Restart the Mac
Install the full feature driver: HP Officejet 7610 Wide Format e-All-in-One series Full Feature Software and Drivers
Also install the Apple driver: HP Printer Drivers v3.0 for OS X
I hope that helps, let me know the results!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
HP Deskjet F4280 - can print test page but nothing else on new Windows 7 laptop on home network
I hope you can help me. I have an HP Deskjet F4280 set up on my desktop computer running Windows Vista Home Premium 64x. I've also got a home network on a D-Link Wireless N router.
My new laptop is a Toshiba with Windows 7. I can connect to the network no problem and can add the printer (attached to my desktop via USB) and can print the test page. My problem is that I can't print any other documents. When I check the print queue all it says is "spooling" and then after a few seconds the job just disappers from the queue.
I connected the printer directly to the laptop and dowloaded the drivers for Windows 7 and it works fine. I've uninstalled and reinstalled all software on both computers. I've spent hours trying different solutions I've found on this web-site and others...and nothing works! I am very frustrated to say the least.
Is there any way you can help me???Hi Lisamcgack,
Print sharing is a Microsoft supported application. Since the printer is working on the computers independently. Then this would be an issue between the operating systems. Check out the following Microsoft document on print sharing.
http://windows.microsoft.com/en-US/windows-vista/Share-a-printer
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution" -
Deskjet F4280. Only producing blank pages
Hello,
I have a Deskjet F4280 all in one connected to a laptop using Windows 7. The printer status says ready to print but when the print command is given, the printer gives out a blank page through the feeder. I checked the ink levels and they are not low. The printer has not been used in a long time so I do not know if this will have something to do with it. No error messages are given.
ThanksHi - The first thing I'd try is a self test to isolate the problem. If the self test isn't printing, than I'm guessing you've got a problem with the ink cartridges (dried up) especially if the printer hasn't been used in a while. Try following the steps in this document to print a self test. If the self test comes out blank, you can try recovering the ink cartridges by placing them with the nozzles face down on a damp paper towel (make sure you don't place the cartridges and paper towel on something that would be damaged by ink). If that doesn't resolve the issue, you'll want to try a new set of cartridges.
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee. -
I recently done an upgrade on my PC (can't remember what). since then I haven't been able to open or log in to my Yahoo bookmarks (red button on tool bar). I get a log in screen, but when I log in with my Yahoo ID and password, I get "This page expired" error message. I've gone the the help menu and reset my yahoo password, but it still won't let me log into yahoo bookmarks with Firefox. If i use Explorer, it works fine. I like Firefox, but I need to be able to access yahoo bookmarks.
Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Click the menu button [[Image:New Fx Menu]], choose History, and then Clear Recent History....
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you. -
How ias integrate with Snacktory for getting main text from an html page
Hi All,
i am new to endeca and ias, i have an requirement, need to get main text from whole html page before ias save text to Endeca_Document_Text property,
as ias save all text in page to endeca_document_text property, it is not ok for reading when show in web page, i use an third party API to filter out the main text from original page,
now i want to save these text to endeca_document_text property,
an another question,
i get zero page when doing the logic of filtering main text from original html text in ParseFilter( HTMLMetatagFilter implements ParseFilter) using Snacktory.
if only do little things, it will work fine, if do more thing, clawer fail to crawl page. any one know how to fix it.
log for clawler.
Successfully set recordstore configuration.
INFO 2013-09-03 00:56:42,743 0 com.endeca.eidi.web.Main [main] Reading seed URLs from: /home/oracle/oracle/endeca/IAS/3.0.0/sample/myfirstcrawl/conf/endeca.lst
INFO 2013-09-03 00:56:42,744 1 com.endeca.eidi.web.Main [main] Seed URLs: [http://www.liferay.com/community/forums/-/message_boards/category/]
INFO 2013-09-03 00:56:43,497 754 com.endeca.eidi.web.db.CrawlDbFactory [main] Initialized crawldb: com.endeca.eidi.web.db.BufferedDerbyCrawlDb
INFO 2013-09-03 00:56:43,498 755 com.endeca.eidi.web.Crawler [main] Using executor settings: numThreads = 100, maxThreadsPerHost=1
INFO 2013-09-03 00:56:44,163 1420 com.endeca.eidi.web.Crawler [main] Fetching seed URLs.
INFO 2013-09-03 00:56:46,519 3776 com.endeca.eidi.web.parse.HTMLMetatagFilter [pool-1-thread-1] come into EndecaHtmlParser getParse
INFO 2013-09-03 00:56:46,519 3776 com.endeca.eidi.web.parse.HTMLMetatagFilter [pool-1-thread-1] come into HTMLMetatagFilter
INFO 2013-09-03 00:56:46,519 3776 com.endeca.eidi.web.parse.HTMLMetatagFilter [pool-1-thread-1] meta tag viewport ==minimum-scale=1.0, width=device-width
INFO 2013-09-03 00:56:52,889 10146 com.endeca.eidi.web.parse.HTMLMetatagFilter [pool-1-thread-1] come into EndecaHtmlParser getParse
INFO 2013-09-03 00:56:52,889 10146 com.endeca.eidi.web.parse.HTMLMetatagFilter [pool-1-thread-1] come into HTMLMetatagFilter
INFO 2013-09-03 00:56:52,890 10147 com.endeca.eidi.web.parse.HTMLMetatagFilter [pool-1-thread-1] meta tag viewport ==minimum-scale=1.0, width=device-width
INFO 2013-09-03 00:56:59,184 16441 com.endeca.eidi.web.parse.HTMLMetatagFilter [pool-1-thread-2] come into EndecaHtmlParser getParse
INFO 2013-09-03 00:56:59,185 16442 com.endeca.eidi.web.parse.HTMLMetatagFilter [pool-1-thread-2] come into HTMLMetatagFilter
INFO 2013-09-03 00:56:59,185 16442 com.endeca.eidi.web.parse.HTMLMetatagFilter [pool-1-thread-2] meta tag viewport ==minimum-scale=1.0, width=device-width
INFO 2013-09-03 00:57:07,057 24314 com.endeca.eidi.web.parse.HTMLMetatagFilter [pool-1-thread-2] come into EndecaHtmlParser getParse
INFO 2013-09-03 00:57:07,057 24314 com.endeca.eidi.web.parse.HTMLMetatagFilter [pool-1-thread-2] come into HTMLMetatagFilter
INFO 2013-09-03 00:57:07,057 24314 com.endeca.eidi.web.parse.HTMLMetatagFilter [pool-1-thread-2] meta tag viewport ==minimum-scale=1.0, width=device-width
INFO 2013-09-03 00:57:07,058 24315 com.endeca.eidi.web.Crawler [main] Seeds complete.
INFO 2013-09-03 00:57:07,090 24347 com.endeca.eidi.web.Crawler [main] Starting crawler shut down
INFO 2013-09-03 00:57:07,095 24352 com.endeca.eidi.web.Crawler [main] Waiting for running threads to complete
INFO 2013-09-03 00:57:07,095 24352 com.endeca.eidi.web.Crawler [main] Progress: Level: Cumulative crawl summary (level)
INFO 2013-09-03 00:57:07,095 24352 com.endeca.eidi.web.Crawler [main] host-summary: www.liferay.com to depth 1
host depth completed total blocks
www.liferay.com 0 0 1 1
www.liferay.com 1 0 0 0
www.liferay.com all 0 1 1
INFO 2013-09-03 00:57:07,096 24353 com.endeca.eidi.web.Crawler [main] host-summary: total crawled: 0 completed. 1 total.
INFO 2013-09-03 00:57:07,096 24353 com.endeca.eidi.web.Crawler [main] Shutting down CrawlDb
INFO 2013-09-03 00:57:07,160 24417 com.endeca.eidi.web.Crawler [main] Progress: Host: Cumulative crawl summary (host)
INFO 2013-09-03 00:57:07,162 24419 com.endeca.eidi.web.Crawler [main] Host: www.liferay.com: 0 fetched. 0.0 mB. 0 records. 0 redirected. 4 retried. 0 gone. 0 filtered.
INFO 2013-09-03 00:57:07,162 24419 com.endeca.eidi.web.Crawler [main] Progress: Perf: All (cumulative) 23.6s. 0.0 Pages/s. 0.0 kB/s. 0 fetched. 0.0 mB. 0 records. 0 redirected. 4 retried. 0 gone. 0 filtered.
INFO 2013-09-03 00:57:07,162 24419 com.endeca.eidi.web.Crawler [main] Crawl complete.
~/oracle/endeca
-======================================
source code for parsefilter
package com.endeca.eidi.web.parse;
import java.util.Map;
import java.util.Properties;
import org.apache.hadoop.conf.Configuration;
import org.apache.log4j.Logger;
import org.apache.nutch.metadata.Metadata;
import org.apache.nutch.parse.HTMLMetaTags;
import org.apache.nutch.parse.Parse;
import org.apache.nutch.parse.ParseData;
import org.apache.nutch.parse.ParseFilter;
import org.apache.nutch.protocol.Content;
import de.jetwick.snacktory.ArticleTextExtractor;
import de.jetwick.snacktory.JResult;
public class HTMLMetatagFilter implements ParseFilter {
public static String METATAG_PROPERTY_NAME_PREFIX = "Endeca.Document.HTML.MetaTag.";
public static String CONTENT_TYPE = "text/html";
private static final Logger logger = Logger.getLogger(HTMLMetatagFilter.class);
public Parse filter(Content content, Parse parse) throws Exception {
logger.info("come into EndecaHtmlParser getParse");
logger.info("come into HTMLMetatagFilter");
//update the content with the main text in html page
//content.setContent(HtmlExtractor.extractMainContent(content));
parse.getData().getParseMeta().add("FILTER-HTMLMETATAG", "ACTIVE");
ParseData parseData = parse.getData();
if (parseData == null) return parse;
extractText(content, parse);
logger.info("update the content with the main text content");
return parse;
private void extractText(Content content, Parse parse){
try {
ParseData parseData = parse.getData();
if (parseData == null) return;
Metadata md = parseData.getParseMeta();
ArticleTextExtractor extractor = new ArticleTextExtractor();
String sourceHtml = new String(content.getContent());
JResult res = extractor.extractContent(sourceHtml);
String text = res.getText();
md.set("Endeca_Document_Text", text);
} catch (Exception e) {
// TODO: handle exception
public static void log(String msg){
System.out.println(msg);
public Configuration getConf() {
return null;
public void setConf(Configuration conf) {but it only extracts URLs from <A> (anchor) tags. I want to be able to extract URLs from <MAP> tags as wellGee, do you think you could modify the code to check for "Map" attributes as well.
Can someone maybe point a page containing info on the HTML toolkit for me?It's called the API. Since you are using the HTMLEditorKit and an ElementIterator and an AttributeSet, I would start there.
There is no such API that says "get me all the links", so you have to do a little work on your own.
Maybe you could use a ParserCallback and every time you get a new tag you check for the "href" attribute. -
Hi. I have a MacBook Pro with OS10.6.8 and cannot get internet pages to load on my WiFi network at home. My iMac, iPhone and iPad all work on this network. It is connected to the net as dropbox registers a connection and so does skype. I can connect to the WiFi in work and on other networks when travelling. However, some other networks are now starting to fail. Can anyone suggets how I can fix it, as the MBP appears to be fine, its updated with all the latest versions of software and the WiFi network is also fine....just not with my MBP??
Hi. I have a MacBook Pro with OS10.6.8 and cannot get internet pages to load on my WiFi network at home. My iMac, iPhone and iPad all work on this network. It is connected to the net as dropbox registers a connection and so does skype. I can connect to the WiFi in work and on other networks when travelling. However, some other networks are now starting to fail. Can anyone suggets how I can fix it, as the MBP appears to be fine, its updated with all the latest versions of software and the WiFi network is also fine....just not with my MBP??
-
Question
Printing internet pages
Reduced print size
Only the first page is reduced and printed as desired
All pages after the first page are full size with information cut off
Recent problem never seen before
Can print from Safari and other software just fine
How can I get all pages to be reduced size?One suggestion worked from the Firefox prints incorrectly link mentioned above by mha007. I'm thrilled since this has been annoying me for weeks. Thanks mha007!
Reset all Firefox printer settings
# Open your profile folder:
# On the menu bar, click on the Help menu and select Troubleshooting Information. The Troubleshooting Information tab will open.
# Under the Application Basics section, click on Show in Finder. A window with your profile folder will open.
# Note: If you are unable to open or use Firefox, follow the instructions in Finding your profile without opening Firefox.
# On the menu bar, click on the Firefox menu and select Quit Firefox.
# In your profile folder, copy the prefs.js file to another folder to make a backup of it.
# Open the original prefs.js file in a text editor (such as TextEdit).
# Remove all lines in prefs.js that start with print. and save the file.
# If something goes wrong when you open Firefox, close it again and overwrite prefs.js with the backup you made. -
when I start firefox, i get this message ( The instruction at "0x7b9c77a9" referenced memory at "0x7b9c77a9". The memory could not be "read" ) hs anyone any idea why? I have scanned with AVG and something simply called 'Trojan Remover' and they both find nothing.... any advice would be greatly welcomed.. thanks
== This happened ==
Every time Firefox opened
== this morning 22/07/10Lyall,
I have seen this before, a long time ago (several years), and I cannot
remember how/if we resolved it.
If this is an impotant issue to you, I suggest that you open a case with
BEA support.
Regards,
Peter.
Got a Question? Ask BEA at http://askbea.bea.com
The views expressed in this posting are solely those of the author, and BEA
Systems, Inc. does not endorse any of these views.
BEA Systems, Inc. is not responsible for the accuracy or completeness of
the
information provided
and assumes no duty to correct, expand upon, delete or update any of the
information contained in this posting.
Lyall Pearce wrote:
The title says it all really.
I see other posts getting replies.
This is a rather important issue, I have seen another post with a similar problem.
While not being a show-stopper it certainly raises concerns.
The application works ok until the application exits (in both development and
executable form)
Apparently this did not happen with Tux 7.1
It does with 8, I do not have 7.1 so I have no workaround.
..Lyall
Maybe you are looking for
-
How do I remove the 'panel' underneath the Header list, and above the email Preview Pane. Contains 'from', 'subject', 'to', 'reply', 'forward' buttons to name a few. Takes up space. == This happened == Every time Firefox opened
-
Flash "arrangement" on webpage
Hello, I have a popup menu made with javascript and css. Its a 'div' with display:none, and the javascript changes its display state. South of that I have a flash movie (fla). I need to move the flash movie 'behind' the popup menu. Right now the menu
-
My safari won't connect to the Internet as it says server stopped responding
Hi, everytime I try to go on Internet through safari, it won't open the page, the error message is, safari cannot connect as server stopped responding. My ipad has been updated from io6 to io6.1. Internet connects fine through google chrome app.
-
i installed windows 8.1 on my laptop HP 655 and i have high definition audio device drivers installed but i cant hear any sound from my headphone or external speakers when i plug the audio jack in its port. but the internal speakers are working well.
-
Time Capsule "backup disk could not be found"
I occaisonally receive an error message on my Macbook Pro and iMac, both running OS 10.8 that my time capsule "backup disk could not be found." I can access the Time Capsule with Airport Utility, can see my backups in Time Capsule-it just won't back