Scanning with leopard

i had been using Silverfast SE to scan from photoshop CS2
now upgraded to leopard, and seems like its not compatible with OS 10.5
using a umax/powerlook 1000. plug-in doesn't appear in photoshop/import window.
any luck out there, or can someone recommend a software good to use, fast?
thanks,
jc

http://hamrick.com/

Similar Messages

Is anyone able to scan with an HP 3055 all-in-one using Leopard

MY hp3055 all in one will not scan with Leopard. HP support says I should wait until "sometime in the future" Any ideas?

Two options:
If the 'TWAIN' driver for the scanner is working, then with scanner connected (and powered on), run "Applications" -> "Image Capture" (standard with OS X). Image Capture just generically looks for TWAIN devices and uses them.
The other option:
You might check to see if VueScan supports it. They claim to support over 750 different flatbed scanners. You can see the list here:
http://www.hamrick.com/vuescan/vuescan.htm#supported
VueScan isn't free (I don't think I paid very much for it -- it was probably about $25-30) but you can download it and it'll operate in 'trial' mode (it puts a watermark pattern over everything you scan until you register it) but you can at least see if it recognizes your scanner before you pay for it.
I use it because I was relying on an ancient flatbed scanner for which the manufacturer no longer even made the drivers -- and it was able to recognize and use the scanner with no problem.

Cannot SCAN with Samsung SCX-4500 Printer, New iMac w/Leopard

I just purchased at an Apple retail store, a brand new 24" iMac along with a Samsung SCX-4500 laser printer, copier and scanner. Bad news is I can't get the scanner function to work. It prints and copies but doesn't scan. I went to Samsung and downloaded the lasted and greatest drivers but no scanning capability yet. Has anyone else purchased this printer? Is it compatible with OX 10.5 or is the Apple store just trying to get rid of printers that don't seem to work with Leopard. This bugs me. Any help would be great.

This is from another forum as I was looking for the answer to the same issue:
First off, when Samsung labels a button "Scan to PC", they mean it. That button only works with Windows PCs not Macs.
To get it to the Samsung SCX 4500 to scan on your Mac you need to acquire the image using some other software. I used Preview.
Put the picture or document that you want scanned on the bed. Open Preview. From the File menu, select the Import Image... option.
The scanner activates and you will see, you guessed it, a preview of what is to be scanned. Notice that the scan button is grayed out.
You now have to click and drag a box around what you want scanned. Once you draw your box identifying the exact image to be scanned, the Scan button is enabled. Now adjust any options, and hit Scan. Enjoy.
Thanks to the Apple Genius in Century City who helped me out, also this post was helpful:
http://discussions.apple.com/thread....sageID=5800155

Cannot scan with HP LaserJet M1005 MFP

I updated to Snow Leopard 10.6.3 yesterday. Big mistake as I cannot now scan with my HP LaserJet M1005 MFP. I have been unable to find a solution here or via Google. Does anyone know if this is possible? I realize this device has never been "Mac friendly" (one might even say, not compatible.... despite HP's over-generous claims), but I would have thought there would be a new driver for SL by now.
If not, could anyone recommend a non-HP scanner (not MFP) that works well with SL?
thanks!

Hi @3Digit ,
I see that you are having issues scanning, there isn't any scanning software in the HP folder. I would like to help you out today.
Open the HP Scan window with one of the following methods:
Double-click the HP Scan icon () for your printer on the Windows desktop.
Click the Windows icon (), click All Programs, click the HP folder, click the name of your printer, and then click HP Scan.
If you are missing the HP Scan software altogether, then the full software didn't install on the computer.
If that is the case, uninstall and reinstall the printer software. Here is the link for the newest drivers. Software & Drivers.
First do these steps, before installing the software, just to make sure it fully installs.
I would disable all the start up programs and temporarily turn off the Antivirus Software and any Real Time Scanning in the Antivirus Software also, to see if that is causing the issue. How to use MSCONFIG . Click on the Startup tab and click Disable all, Then click the Services tab and check Hide All Microsoft Services.
I have provided a document for how to scan. It is for Windows 7, but the steps will also work for Windows Vista.
Scan from Windows 7 With the Full Feature HP Software for HP LaserJet Multifunction Printers
How is the printer connected? (USB/Ethernet/Wireless)
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Using Image Capture to scan with Canon Pixma MX700

I previously had trouble connecting my Canon Pixma MX700 to my MBP, but soon figured out that I needed a new high speed USB 2.0 cable, versus the old one I was trying to use it with. Doh!
So now it prints without any trouble at all, and I know that all its features - printing, scanning, fax, copier, are supposed to be compatible with Leopard.
However, I'm still having issues scanning. I Googled and found a comment somewhere that with this specific model, one has to use Image Capture for the scanning portion, instead of the Canon software.
Great, so that explained the problem I was having trying to figure out how to GET it to communicate at all with the MBP (downloaded the latest scanner driver from Canon with no result).
But it still will not scan with Image Capture. Communication is fine- the image is detected and I can see it perfectly in the Image Capture window, am able to change options, etc. Once I drag and select the image I want to scan and click the scan button, nothing happens. Or more specifically, the button will be click-able and for about two seconds it appears to be working (with the scan button substituted by a cancel button), but then the scan button will pop back up and nothing appears in the folder I specified the image to be saved to.
Now I'm completely stumped. What am I doing wrong?
Thanks!!!

With my MacBook running Leopard, I had been able to successfully scan multiple images by pressing the MX7000 scan button and capturing the images with MP Navigator. The MX700 is networked over WiFi. Early on, I learned that it seemed to be more reliable to drive this process using the scan button, rather than trying to initiate the scan from the MP Navigator UI.
However, recently things stopped working, and after the first image was scanned, subsequent scans would fail, with MP Navigator complaining about not being able to connect to the scanner. This sounds similar to the problem described in the original posting.
I went to the Canon USA support site and downloaded /installed the latest versions of the MX700 scan driver (13.9.0) and MP Navigator (1.0.4), both available under the "Drivers and Downloads" section for the MX700 support page (be sure to select "Mac OS X" from the pull-down menu).
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDeta ilTabAct&fcategoryid=238&modelid=15651#DownloadDetailAct
The new updates seem to have solved the problem, and I can now scan multiple images one after the other. Again, I always initiate the scan from the button on the MX700, and always capture using MP Navigator, which has the really nice feature for creating and editing multi-page PDFs.
Message was edited by: donbondio

SCANNING IN LEOPARD

My Canon rep informed me that Leopard will run my scanner directly without third party software. Is this true? Or did he mean that the new iPhoto will handle that?
This is the first I've heard of this. Anybody know?

Rex:
My Canon requires the Canoscan plugin for scanning from Photoshop. The rep may be referring to a TWAIN driver that my be included with Leopard. However, I've found the CanoScan app/plugin to be very good, especially when scanning multiple photos as it will automatically crop each photo and save as a separate file.
However, iPhoto does not support interfacing with scanners. You must scan, save to the HD and then import into iPhoto.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

How do I remove "Scan with ClamXav" in Lion? I cannot find a contextual menu item folder in at home/library.

How do I remove "Scan with ClamXav" in Lion? I cannot find a contextual menu item folder in at home/library. I installed and removed ClamXav from the Mac app store.
Thanks.

ToBeHuman wrote:
Thanks! AppTrap mentioned in the linked article got rid of it for me.
Actually, it didn't. With Snow Leopard and Lion, the contextual menu is provided by a built in "service" within the ClamXav application itself.
If you downloaded ClamXav from the AppStore, all you need to do is trash it and reboot.
If you downloaded the full version from the web you need to first run the "ClamAV Engine REMOVER" script that comes on the ClamXav_2.x.x.dmg. Then trash the ClamXav application, empty the trash and reboot.
There are also one or two preferences that can be found in ~/Library/Preferences/ that start with "uk.co.markallen.clamxav..." that take up minimal space and don't do anything without the application. AppTrap probably found those.

Canon MP 610 : no scanning with Leopoard

As soon as Leopard is installed Canon MP610 no longer scans and YES! there will be updates but it is still up to the Apple user to check every day on the Canon websites (US and Canada) to see if updates are available.
It would be too much for Canon to send an email to all registered Canon owners to inform them that the drivers (and all updates) are available with a link to go to their website for immediate downloads.
Excellent printer, such poor customer service....
"Thank you for your E-mail inquiry regarding the Canon PIXMA MP610.
Mac OS X version 10.5 drivers are currently not available for this product. If drivers are made available, they will be posted on our website under the downloads section. We suggest visiting our website periodically to see if Mac OS X version 10.5 have been released for your model."
How nice.....
Alain

It's so easy to point the finger at the vendor now but did you check with Canon first before loading Leopard to ensure that your AIO was going to work? My bet is that you didn't as most people don't. You all rush in and load the "latest and greatest' and then blame everyone else when things go wrong. This same problem occurred when Tiger was released and it will happen again when all the 10.5 updates get rolled out and when 10.6 becomes the best OS ever.
As consumers we need to be more careful. Always check before installing something new and ensure you have backups when things do go wrong.
With regards to your MP610, the current version of ScanGear (v13.4.0) does work with Leopard however this is an issue with multiple page scanning. The new version, 13.9.0, is due for release at the end of November.

Lost functionality with Leopard...

Lost functionality with Leopard upgrade....
1 - AOL for Mac OS X (10.3.7) application: can't access email addresses when writing mail and can't attach files.
2 - Canon's MP Navigator (2.2.2) won't batch scan documents with MP830. Worked fine with Tiger.
3 - Can't mount USB hard drive attached to my airport extreme and when I try the extreme goes offline and I have to restart it.
How about you all. I only used 'em all the time.

I have the same problem.
After upgrade from my Mac Pro to Mac OS X Lion yesterday, the same problem happened described by danhalli.
No connection to the printer over 2101nw. The MAC gets all information if an other computer makes a connection to the print server, so the communication works, however connection cannot be established.
There was no way to fix it. complete new installation from Printer Software or wireless HP Print Server did not help.
Important: all other computer in the network are working fine with the connection manager (MAC and Microsoft PC´s)
All MAC computer are working fine with the SW 10.6.8 . The SW 10.7.2 does not work I hope it will be fixed soon. If you can not print, it takes a lot of time !!!!

What's wrong with Leopard mail, its allowed in, something corrupting my mac

Hi,
I recently bought a brand new 24 inch iMac and Leopard. Most things were fine until I received an unsolicited email on 28th Nov ...from a
Gemma Hindley FW; Compost like a pro
since then mail has gone haywire. I cannot delete this email at all. I cant receive any emails and I work from home and am really desperate as this is causing me major stress.
The waste paper icon has gone from my mail window and although emails are deleted from the working window, the dont go in the waste bin or the waste bin in the dock.When I quit ad reopen Gemma Hindley reappears.
Many times a completely different window appears when I open mail one that I have never seen before and is very difficult to navigate. many of the icons in the mail header bar are non operative with this window.
Other times Mail wont open, or wont quit, or cant send emails, have nt received any since Gemma this email. Then I went through this forum and found that if I
Open mail go to prefs general and switch check mail "manually.
Force quit mail
Open Mail again go to prefs junk mail and turn off spam filtering
This then allowed me to open the usual mail working window and I received that infuriating email again and no other ones at all. I have sent myself emails and so have others but they have not been received by me at all. the above steps allowed me to send emails.
There is obviously a problem with Leopard mail. Whether or not this email has corrupted my mac I don't know. It looks like it is blocking all my incoming emails.
I am not as adept as many of you on this forum, just a simple user trying to earn a living and not able to do so at present. Help greatly appreciated.
Thanks in advance. George UK

For anyone else reading this thread, it is worth knowing that sometimes an email is, or can be, corrupted thereby jamming the works. The solution above is good, but I just wanted to suggest another one.
If the problem arises, go to an online mail access service, such as Mail2Web.com and login to you mail account there and delete the offending message.
Problem solved.
And George, as this is all entirely voluntary, whinging about no takers may not endear people to you. Besides which, a few minutes of searching on Google would have found you a number of solutions.

Constant lock ups with Leopard!

I find myself having to hold in the power button to turn my computer off almost everyday now! I am not sure what is causing these constant lock ups! Ever since upgrading to Leopard have I noticed this. Yesterday It happened when trying to open iTunes. Today it happened when I clicked on MAIL. The icon just bounces in the dock and nothing happens. I hit FORCE QUIT and that doesn't work either.
Do I need to clear something out or get rid of something? Even when I try to restart my computer sometimes that will lock up too! The only way to get around any of these issues is to hold in the power button to turn the whole computer off, wait a few seconds and turn it back on. Once its back on, then I have full functionality out the computer again but its getting on my nerves that I have to do this all to often!
I think they are some cool features with Leopard but I am experiencing way to many bugs/problems with it to be 100% happy with it.
As I am writing this posting, I just clicked on my APPLE icon in the top left of the screen and then clicked ABOUT THIS MAC to make sure I was using the most current version, and NOTHING happened!

Try reinstalling. It sounds like you did an upgrade from an earlier version that may have been corrupt to start with. You may be able to do the following:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Installing Tiger on a Macbook Pro that came only with Leopard

Hi guys,
Any ideas on how to install Tiger onto a Macbook Pro that came preloaded with Leopard, and only has a Leopard disc?
I've got a refurbished Macbook Pro recently. Realised that one of my application doesn't work, Capture One Pro. Visited Phase One's website and they said it only supports 3.9 and above at the time it was released, which makes it 10.4.10.
Systems in the story below: Macbook Pro Core Cuo. Macbook Pro C2D (new set), Mac Pro, iMac Core 2 Duo
Here's what I've tried
1. I've an original disk that came with my MBP CD. When I try to boot from that disk on my MBP C2D, it gives me the crash screen -> "please hold the power for secs to restart".
2. I've tried installing Tiger onto my iMac and did a harddisk clone via Carbon Copy Cloner (CCC) to my MBP CD. Tiger was able to run on my MBP CD fine.
3. Then I tried using CCC to clone it over to my MBP C2D. It doesn't work. Shows me the crash screen.
4. I've tried installing Tiger on my Mac Pro. Used CCC to clone over the disk image to MBP C2D. Doesn't work too. Crash screen.
5. Created disk images of Tiger with Disk Utility on iMac, Mac Pro. Tried to restore using the iMac, Mac Pro disk images of Tiger. Doesn't work. Shows me the crash screen.
6. Updated Tiger to 10.4.11 on my Mac Pro. Created disk image using Disk Utility. Restored MBP C2D with it. Crash screen on load.
I'm out of ideas and Apple Support won't open until Monday.
It seems that this MBP C2D is set on not installing Tiger, no matter what. Wonder if getting hold of a Tiger retail disc will do the trick?

You can install tiger onto a MacBook Pro up to version 3,1.
Run System Profiler and under hardware:
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro4,1 This line is the model number!
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 2 GB
Bus Speed: 800 MHz
Boot ROM Version: MBP41.00C1.B00
SMC Version: 1.27f1
Serial Number: XXXXXXXXXXX
Sudden Motion Sensor:
State: Enabled
I have got tiger installed onto this MacBookPro which is the latest 4,1 model, but you require the latest Tiger disk (which the Apple Genius had in my case), but the volume, brightness and trackpad gestures do not work! Everything else is fine.

ATI Radeon 9600 Mac & PC Edition will not work with leopard

When I installed a new ATI Radeon 9600 Mac & PC Edition, 256MB; my Dual 2 GHz G5 (June 2004) will not allow me to drive my Apple Cinema Display while running under leopard, (neither 10.5.1 or 10.5.2 with Leopard Graphics Update).
The mac starts up as usual and gets to the white screen with Apple logo -then the progress ring eventually stalls. The mouse pointer becomes visible and can be moved freely around this screen.
I can connect from other macs on the network and navigate files, but screen sharing results in an all black window.
The Radeon 9600 works fine if I start up the mac with the Tiger installation disk.
I have tried every suggestion that I could find on these boards and elsewhere: zapped the pram, reset the SMU, installed older ATI Drivers, etc...
Of course the G5 is far out of warranty. I've been running Leopard since the day it shipped - so that's out of warranty now, and there is little help to be found on the ATI/AMD website. I'm afraid I'll have to return the card before Apple releases another graphics update.
The stock graphics card that came with this mac is the nVIDIA 64MB GeForce FX 5200 - but it's having trouble keeping up with Leopard's demands - my isight barely works, most special effects in iChat and PhotoBooth are unusable, and of course I'm not given the option to use a transparent menu bar,
I am really good at swapping video cards in the G5 now - but I'm so frustrated.
Does anyone else have any suggestions?
thanks

Hello I have Grafic card ATI Radeon 9600 Pro-256MB install. after Updates. I was after *delete all ATI files besides*
ATINDRV.kext
ATITVOut.kext
ATIRadeon.kext
ATIRadeon9700.kext
ATIRadeon9700DVDDriver.bundle
ATIRadeon9700GA.plugin
ATIRadeon9700GLDriver.bundle
ATIRadeon9700VADriver.bundle
ATIRadeonDVDDriver.bundle
ATIRadeonGA.plugin
ATIRadeonGLDriver.bundle
ATIRNDRV.kext
from System/Library/Extensions run ther 30'' Cinema, mit 2560x1600 but without Quartz Extreme . *I'm very angry of APPLE* 3 week without help, 5 Telefon support with Apple, with ATI without solution.
I know that ATIRadeon9700.kext drive Quartz Extreme. But I don't know what can I do too.
My solution for this moment is only this one. If I know my solution from Apple, ATI or another one look sometimes on
http://discussions.apple.com/thread.jspa?messageID=6645245&#6645245
Message was edited by: knoche
Message was edited by: knoche

Anyone else having a Problem with Leopard and Photoshop CS3?

I'm using CS3 with Leopard 10.5.4 at work and there are some very aggravating anomalies, that I'd like to nail down to a cause. Most frequently, when switching from apps to P'Shop, the menu bar stays for the previous app, i.e. when going from Finder to P'shop, the menu bar still says Finder and has Finder options. Changing from Lightwave to P'Shop, the menu bar remains Lightwave.
Occasionally, an Adobe app - P'Shop or InDesign - will simply disappear and not come back. The icon in the dock shows it as active, but no amount of clicking, Command-Tabbing will reveal the app and I have to Force Quit, losing unsaved changes.
I have a feeling it's Leopard, since, I've used CS3 on Tiger and CS4 on Tiger and never had a problem.
I'm wondering if upgrading to the latest Leopard would make much of a difference.
Has anyone come across this and found any kind of answers?
Thanks for any suggestions.
-Vincent

> Just because it doesn't happen to Phil (who may not use all of the same features of the Suite that others do anyway) does NOT mean that these problems are not real and are not mere PEBCAK.
Right. If someone is having a problem associated with Tiger, it's PEBAK. If Leopard is involved, it's automatically because of Leopard. Apparently, with Apple's latest OS, trouble shooting problems are no longer necessary - just blame it on Leopard and call it a day.
b FUD
I find the dynamics here really interesting. This thread would have been very different if Vincent had posted with problems involving Tiger. Would have gone something like this:
After admonishing him for not providing more information about his setup by posting the obnoxious big blue link on how to ask questions (ahem - we know NOTHING about his machine or configuration, such as which machine, how much RAM, scratch disk or attached peripherals), there'd be all kinds of trouble shooting advice given - "try a new user", "repair permissions", "run DiskWarrior, and on and on ...
But no, since he mentions Leopard, none of that is apparently necessary and the completely, utterly
b irresponsible
advice is given ... "that's just the way Leopard is".
Those are some serious problems he's reporting that have nothing to do with Leopard. Something is obviously hosed!
As for discounting my experience because I don't use every app in the suite as extensively as I do Photoshop, I'm FAR more qualified to discuss Leopard and CS issues than Ann or Neil who do not use Leopard at all (and have never used it as far as I know.)
"Others have problems with it", is their battle cry but it's extremely weak. Do I really need to remind you all that these forum are ALWAYS filled with people who have problems, regardless of version or OS? You act as if this forum was a ghost town when Tiger and CS3 were current!
Gee, Ann ... people are STILL reporting problems with 10.5 and CS3? How shocking! Guess what - people are STILL reporting problems with 10.4 and CS3 too! Let me make a prediction - people will have problems with 10.8 and CS9!
Vincent-
> I don't really deal with fonts anyway ...
Yes. You do. Even if you never type a single line of text, every application uses fonts to create menus and other GUI items. If one of those fonts are bad, it can create all kinds of problems, including the very problems you mention.
The fact that you don't seem aware of this and you're still using 10.5.4 leads me to believe you're not familiar with the basic practices of maintaining a healthy system. Again, how did you install Leopard on that machine?
Look, if you're simply trying to justify using CS4, go right ahead. It's a worthwhile upgrade in it's own right. However, if you install it on that machine in it's current state, CS4 will NOT fix your problems because you do NOT have a healthy system.
You asked for experiences with Leopard - I can launch every application in both CS3 and CS4 suites
i simultaneously,
and STILL not have your issues. I haven't experienced anything like your CS3 problems in Leopard - on both a 2006 Mac Pro and a 2008 Macbook.
If you'd like help to try and figure out the real problem, I'm more than happy to help. If not, Adobe will gladly take your money ...
-phil

After a week with Leopard.

The good news for me is that is mostly stable. The bad news is that it has some unreproducible quirks on my machine. To share two with you:
1. At one point, the keyboard worked for application, but not in the Finder. This meant that I couldn't perform a search or invoke Finder menus using the keyboard. Very strange. A restart solved the problem.
2. At one point, TM and the Address Book decided to go to war. When I opened the address book and the invoked Time Machine, the dock would not disappear. This mean that I couldn't cancel out of TM because the Dock was in the way. I had to hide the dock in order to cancel out of TM. A restart solved the problem.
Looks like memory is getting a little kerfluffled in Leopard. I tend to keep a lot of programs open, so I'm not sure if it is Leopard or a misbehaving application.
On the bright side, even with some quirks, Spaces for me is fantastic. I can now keep all the apps open that I use during the day without having to play hide the application. Spaces was really done right. Congrats to Apple for that one.
Even with its quirks, Leopard is usable for me. It hasn't actually crashed, caused me a data loss, etc. I'm keeping my Tiger backup around just in case I need to revert, but overall, I'm pretty happy with Leopard. Sounds like some fixes are in the works which should make Leopard even more stable.

Hi abrody,
I checked the panic log. I was very concerned because I just put new memory in and thought that there was a real possibility of a bad memory chip. On further research, I tend to think not. Here is a dump of the log:
Thu Nov 8 14:06:39 2007
panic(cpu 1 caller 0x00B435A3): "OSMalloc_Tagrele(): refcnt 0\n"@/SourceCache/xnu/xnu-1228/osfmk/kern/kalloc.c:613
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x421cfa38 : 0x12b0e1 (0x4555b4 0x421cfa6c 0x133238 0x0)
0x421cfa88 : 0xb435a3 (0x455f44 0x44 0xd54d100 0x1a136f)
0x421cfac8 : 0xb443cf (0xb957a00 0x57e5c00 0x421cfb08 0x5e34200)
0x421cfae8 : 0xb443e4 (0x2204084 0x67c9670 0x0 0x0)
0x421cfb08 : 0xb4349c (0x67c9670 0xffff 0x5e34204 0x0)
0x421cfb28 : 0xb3e220 (0x2203d7c 0x283 0xd51f648 0xf8)
0x421cfb48 : 0x3e810c (0x5e34200 0x52e078 0x1 0x1412a7)
0x421cfb68 : 0x3e8bff (0x5e34200 0x52e078 0x421cfb78 0x3e8179)
0x421cfb98 : 0x3e8aba (0xd621180 0x0 0x1 0x0)
0x421cfbb8 : 0x3e810c (0xd621180 0x0 0x1 0xd51f650)
0x421cfbd8 : 0x3e81d9 (0xd621180 0x0 0xd4ed604 0x3e8179)
0x421cfbf8 : 0x3ee95b (0xd621180 0x0 0x1 0x0)
0x421cfc18 : 0x3e810c (0xd4ed600 0x0 0x1 0x3e810c)
0x421cfc38 : 0x3e81d9 (0xd4ed600 0x0 0xd6204e4 0x7a776a0)
0x421cfc58 : 0x3e9e35 (0xd4ed600 0x5efa790 0x421cfc98 0x7a776a0)
0x421cfc78 : 0x3e810c (0xd6204e0 0x0 0x1 0x1e)
Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
at.obdev.nke.LittleSnitch(2.0.21)@0xb3c000->0xb5cfff
BSD process name corresponding to current thread: hueyAmbient
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:35:55 PDT 2007; root:xnu-1228~1/RELEASE_I386
System model name: iMac6,1 (Mac-F4218FC8)
The thing is, HueyAmbient has been misbehaving as it has not been updated for Leopard. (It's a monitor calibration software/hardware combo from Pantone.) Since I've taken it out of Login Items, the system has been rock solid.
One other issue does concern me though. I followed the Cntrl-D startup instructions to do a hardware test and my machine never booted. It gets to the gray Apple screen and stays there. I am using the original Install disc supplied with the machine. Any thoughts?

Scanning with leopard

Similar Messages

Maybe you are looking for